Retrieve data on table with data type
Hello,
I want ask, there is query to retrieve data with data type on table SQL Server 2008 R2 ?
Please take a look at sp_describe_first_result_set,sp_describe_undeclared_parameters,
and sys.dm_exec_describe_first_result_set.
Similar Messages
-
How to update the data base table with data
i have two ztables, one is zfm_kfz and other one is zfm_kmvrg
zfm_kfz is maintained by using table maintenance generator as well as alv grid control for list display.
zfm_kfz the field r like this KFZR, GERAET, KOSTENTRAEGER, BEZEICHNUNG, TUVDATUMMMYYYY, ASUDATUMMMYYYY, KMSTAND, HISTO AND REIFEN.
PROBLEM: all the data in grid control r updated except KMSTAND
fields in zfm_kmvrg are kostentraeger, kfznr and kmstand i m creating table control for this screen here what ever enter the last km stand is updated in the list.for one kfznr many kostentraegers and kmstand, the last km stand is updated here , go through this code plz hepl me
CONTROLS tabctrl TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF tabctrl-cols,
lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF zfm_kmvrg,
fs_itab LIKE LINE OF itab,
fl_change TYPE c,
fl_error TYPE c.
*TABLES fs_itab.
LOOP AT tabctrl-cols INTO cols.
cols-screen-input = '0'.
MODIFY tabctrl-cols FROM cols INDEX sy-tabix.
ENDLOOP.
*SELECT * FROM spfli INTO TABLE itab.
CALL SCREEN 100.
MODULE status_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_101'.
DESCRIBE TABLE itab LINES lines.
tabctrl-lines = lines.
ENDMODULE. "status_0100 OUTPUT
MODULE cancel INPUT
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE. "cancel INPUT
MODULE read_table_control INPUT
MODULE read_table_control INPUT.
MODIFY itab FROM fs_itab INDEX tabctrl-current_line.
ENDMODULE. "read_table_control INPUT
MODULE user_command_0100 INPUT
MODULE user_command_0100 INPUT.
DATA:
lw_index TYPE i.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'ADD'.
LOOP AT tabctrl-cols INTO cols.
cols-screen-input = '1'.
MODIFY tabctrl-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CLEAR fs_itab.
APPEND fs_itab TO itab.
WHEN 'SAVE'.
IF NOT itab[] IS INITIAL.
LOOP AT itab[] into FS_ITAB.
lw_index = sy-tabix.
IF NOT fs_itab IS INITIAL.
MODIFY ZFM_KMVRG FROM fs_itab.
IF sy-subrc EQ 0.
UPDATE ZFM_KFZ set kmstand = fs_itab-kmstand
WHERE kfznr = fs_itab-kfznr.
ELSE.
fl_error = 'X'.
WRITE:/ 'The record number', lw_index,
'has not been updated'.
ENDIF.
ENDIF.
ENDLOOP.
ELSE.
MESSAGE s000(0) WITH 'No data is present to update'.
ENDIF.
ENDCASE.
IF fl_error = 'X'.
LEAVE TO LIST-PROCESSING.
ELSE.
MESSAGE s000(0) WITH
'All the records have been updated successfully'.
ENDIF.
ENDMODULE. "user_command_0100 INPUT
IN SE51
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB INTO fs_itab WITH CONTROL tabctrl.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
module read_table_control.
ENDLOOP.
module user_command_0100.
i m trying many times i m not getting proper output, plz help me on thisHi,
I am hereby givng the similar sample code.Check this with your requirement.
In the flow logic of the screen 9000, write the following code.
PROCESS BEFORE OUTPUT.
MODULE set_status.
MODULE get_t_ctrl_lines.
LOOP AT i_makt WITH CONTROL t_ctrl CURSOR t_ctrl-current_line.
* Dynamic screen modifications
MODULE set_screen_fields.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT i_makt.
FIELD i_makt-pick MODULE check.
FIELD i_makt-zmatnr MODULE zmatnr .
ENDLOOP.
MODULE user_command_9000.
In the program, write the following code.
PROGRAM SAPMZTC MESSAGE-ID zz.
* Tables Declaration
TABLES: zzz_makt.
* Internal table Declaration
DATA : i_makt TYPE STANDARD TABLE OF zzz_makt WITH HEADER LINE.
* Table control Declaration
CONTROLS: t_ctrl TYPE TABLEVIEW USING SCREEN '9000'.
* Variable Declaration
DATA : flg, "Flag to set the change mode
ln TYPE i. "No. of records
*& Module get_T_CTRL_lines OUTPUT
* Populating data
MODULE get_t_ctrl_lines OUTPUT.
SELECT zmatnr zmaktx
INTO CORRESPONDING FIELDS OF TABLE i_makt
FROM zzz_makt.
DESCRIBE TABLE i_makt LINES ln.
* To make the vertical scroll bar to come on runtime
t_ctrl-lines = ln + 100.
ENDMODULE. " get_T_CTRL_lines OUTPUT
*& Module USER_COMMAND_9000 INPUT
* Triggering event according to the user command
MODULE user_command_9000 INPUT.
DATA :lv_fcode LIKE sy-ucomm, "Function Code
lv_answer(1) type c. "Storing the answer
lv_fcode = sy-ucomm.
CASE lv_fcode.
WHEN 'CHANGE'.
* Setting the flag to make the table control in editable mode[excluding
* primary key].
flg = 'Y'.
WHEN 'DELETE'.
* Setting the flag to make the table control in editable mode after
* deleting the selected line
flg = 'Y'.
* Confirmation of delete
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = 'Confirm'
text_question = 'Are you sure to delete from database?'
TEXT_BUTTON_1 = 'Yes'(001)
TEXT_BUTTON_2 = 'No'(002)
IMPORTING
ANSWER = lv_answer.
if lv_answer eq '1'.
* Updating the database table from the internal table
UPDATE zzz_makt FROM TABLE i_makt.
* Deleting the selected row from the internal table
DELETE i_makt WHERE pick = 'X'.
* Deleting the selected row from the database table
DELETE FROM zzz_makt WHERE pick = 'X'.
MESSAGE s005 WITH 'Deleted Successfully'.
ENDIF.
WHEN 'SAVE'.
* Inserting new record or updating existing record in database table
* from the internal table
MODIFY zzz_makt FROM TABLE i_makt.
MESSAGE s005 WITH 'Saved Successfully'.
WHEN 'BACK'.
SET SCREEN '0'.
WHEN 'EXIT' OR 'CANCEL'.
* Leaving the program
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module set_screen_fields OUTPUT
* Setting the screen fields
MODULE set_screen_fields OUTPUT.
LOOP AT SCREEN.
IF flg IS INITIAL.
screen-input = 0.
ELSEIF ( flg EQ 'Y' ).
IF ( ( screen-name = 'I_MAKT-ZMAKTX'
OR screen-name = 'I_MAKT-CHECK1' )
AND t_ctrl-current_line LE ln ) .
* Making the screen fields as editable
screen-input = 1.
ELSEIF ( ( screen-name = 'I_MAKT-ZMATNR' )
AND t_ctrl-current_line LE ln ).
* Making the screen field as uneditable
screen-input = 0.
ENDIF.
ENDIF.
* Modifying the screen after making changes
MODIFY SCREEN.
ENDLOOP.
ENDMODULE. " set_screen_fields OUTPUT
*& Module zmatnr INPUT
* Appending records to the internal table
MODULE zmatnr INPUT.
MODIFY i_makt INDEX t_ctrl-current_line.
IF t_ctrl-current_line GT ln.
READ TABLE i_makt WITH KEY zmatnr = i_makt-zmatnr.
IF sy-subrc NE 0.
* Inserting record if it does not exist in database
APPEND i_makt.
ELSE.
MESSAGE i005 WITH 'Material Number' i_makt-zmatnr 'already exists'.
ENDIF.
ENDIF.
ENDMODULE. " zmatnr INPUT
*& Module set_status OUTPUT
* Setting the GUI status
MODULE set_status OUTPUT.
SET PF-STATUS 'ZSTATUS'.
SET TITLEBAR 'ZTITLE'.
ENDMODULE. " set_status OUTPUT
*& Module CHECK INPUT
* Modify the internal table using the current line in table control
MODULE check INPUT.
MODIFY i_makt INDEX t_ctrl-current_line.
ENDMODULE. " CHECK INPUT -
Problems with retrieving data from tables with 240 and more records
Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks. -
How to pass internal table with data in ABAP OO
Hi experts ,
Here is the problem...
I create a screen 100 and use the internal table to get data from database, and then press the button on screen 100 , it will call screen 200.
I use ABAP OO code in screen 200, and i want to keep the internal table with data that i get from the sceen 100 parts, but it seems that it just supports to create a new internal table and get data from database in ABAP OO. That means i need to create a new table to save the data in internal table ? Or there is any other solution something like exporting or memory id ...
ps . the internal table in screen 100 is declared in global area, the beginning of the code.
Please give me some advice, thanks a lot!
Regards ,
ClaireI have already know how to do, here is my code:
METHODS fill_tree importing itab2 like itab1.
CALL METHOD: me->fill_tree exporting itab2 = itab1.
In METHOD fill_tree,
declare
data: itab3 TYPE STANDARD TABLE OF itab,
itab3[] = itab1[].
It is useful to me, thanks a lot. -
Fill a table with data coming from an RFC
Hello everyone:
I've followed the Weblog "How many lines of java code did i write for a simple Web Dynpro?"
/people/durairaj.athavanraja/blog/2004/10/17/how-many-lines-of-java-code-did-i-write-for-a-simple-web-dynpro
I've called an RFC and created a table with data coming from it (which is also a table). My question is, if in this table there's a field named "UserType" there are two possible values for this field:
"userA"
"userB"
How can I get the table only show me the "userA" registers? The RFC does return all of the users, but when filling the table, can I put an if-else somewhere on my code?
Thanks a lot
AlejandroHi Alejandro,
Referring to the link provided "The logic of the filter process is not implemented in Web Dynpro. The application developer must implement the action to be executed."
We would have to implement the action onFilter in the controller implementation. Ideally, we fill the data retrieved from backend into a List (java.util.List) (this could be done on init of view) and then subset the list after meeting the criteria in the action handler(say
onActionFilterData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent).
Having done this, you may bind the output list back to the node (shown in table)
Regards,
Chaitanya -
Create data base table with EXEC SQL
Hello,
I nead to create o data base table with EXEC SQL in an Abap program.
My code is :
TRY.
EXEC SQL.
CREATE table zt_hello ( mandt char(4) NOT NULL,
kunnr char(10) NOT NULL,
PRIMARY KEY (mandt, kunnr) )
ENDEXEC.
CATCH cx_sy_native_sql_error INTO exc_ref.
error_text = exc_ref->get_text( ).
ENDTRY.
IF sy-subrc = 0.
COMMIT WORK.
ENDIF.
But it still not working.
Can you help me please.
Thanks.
Edited by: widad soubhi on Jul 14, 2010 5:26 PMPlease refer this code
REPORT z_struct_create .
DATA: my_row(500) TYPE c,
my_file_1 LIKE my_row OCCURS 0 WITH HEADER LINE.
DATA: dd02v TYPE dd02v.
DATA: my_file_tab1 LIKE dd03p OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME TITLE text
NO INTERVALS.
PARAMETERS:
name TYPE ddobjname,
testo TYPE text40,
file_1 LIKE rlgrap-filename.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK blk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file_1.
PERFORM file_selection USING file_1.
INITIALIZATION.
text = text-001.
START-OF-SELECTION.
IF file_1 IS INITIAL.
MESSAGE ID 'Z0017_BDI' TYPE 'I' NUMBER 001.
EXIT.
ENDIF.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = file_1
filetype = 'ASC'
TABLES
data_tab = my_file_1.
IF sy-subrc 0.
MESSAGE ID 'Z0017_BDI' TYPE 'I' NUMBER 002.
EXIT.
ENDIF.
LOOP AT my_file_1.
IF sy-tabix > 1.
CLEAR my_file_tab1.
SPLIT my_file_1 AT ';' INTO
my_file_tab1-fieldname
my_file_tab1-datatype
my_file_tab1-leng
my_file_tab1-decimals
my_file_tab1-ddtext
my_file_tab1-inttype = 'C'.
my_file_tab1-INTLEN = my_file_tab1-leng.
my_file_tab1-tabname = name.
my_file_tab1-position = sy-tabix - 1.
my_file_tab1-ddlanguage = sy-langu.
my_file_tab1-OUTPUTLEN = my_file_tab1-leng.
APPEND my_file_tab1.
ENDIF.
ENDLOOP.
dd02v-tabname = name.
dd02v-ddlanguage = sy-langu.
dd02v-tabclass = 'INTTAB'.
dd02v-DDTEXT = testo.
dd02v-MASTERLANG = sy-langu.
IF NOT my_file_tab1[] IS INITIAL.
CALL FUNCTION 'DDIF_TABL_PUT'
EXPORTING
name = name
dd02v_wa = dd02v
TABLES
dd03p_tab = my_file_tab1
EXCEPTIONS
tabl_not_found = 1
name_inconsistent = 2
tabl_inconsistent = 3
put_failure = 4
put_refused = 5
OTHERS = 6
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
MESSAGE ID 'Z0017_BDI' TYPE 'I' NUMBER 003.
EXIT.
ENDIF.
*& Form file_selection
-->P_FILE_1 text
FORM file_selection USING p_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'c:\'
mask = ',.,..'
mode = '0'
title = 'Selezione file'
IMPORTING
filename = p_file
RC = RCODE
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
ENDFORM. " file_selection
File Template:
Fieldname;Data Type;Lentgh;Dec.;Descr.
FIELD1;CHAR;000020;000000;my field 1
FIELD2;CHAR;000008;000000;my field 2
FIELD3;CHAR;000007;000000;my field 3
FIELD4;CHAR;000006;000000;my field 4 -
Help on export sybase iq tables with data and import in another database ?
Help on export Sybase iq 16 tables with data and import into another database ?
Hi Nilesh,
If you have table/index create commands (DDLs), you can create them in Developper and import data using one of methods below
Extract/ Load table
Insert location method : require IQ servers to be entered in interfaces file
Backup/Restore : copy entire database content
If you have not the DDLs, you can generate them using IQ cockpit or SCC.
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01773.1604/doc/html/san1288042631955.html
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01840.1604/doc/html/san1281564927196.html
Regards,
Tayeb. -
How can I load data into table with SQL*LOADER
how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)
1 1 1 1234567------(more than 255bytes)Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961 -
How to move tables with data from one client to another
Hello friends
I have 2 clients 001 and 002.
I have created a table with lots of data on client 001.
I have to get the same table on 002 also with the same data.
Is there an easier way of transfering this data from one table to another?
I would appreciate any feedback on this.
I know that mappings etc., can be done using the export and import of tpz file. So I want to know if there is any similar thing to transfer a table with data.
THanks
Ramhi
thanks for the response
We are working on a sandbox system for demo purpose.
Actually we have two different group of people using two different clients created on the same server.
Our group is using client 001 and another group is using client 002.
We don't want the changes that one group does to the table to affect the other.
Our group has created a z-table and have entered considerable amount of data.
However, the other group also need to create the same table with the same data.
So to avoid double work, we were trying to see if there is a way to copy the table with data created on 001 to 002.
Any suggestions / feedback will be greatly appreciated.
Thanks
Ram -
Moving tables with data from one client to another
Hello friends
I have 2 clients 001 and 002.
I have created a table with lots of data on client 001.
I have to get the same table on 002 also with the same data.
Is there an easier way of transfering this data from one table to another?
I would appreciate any feedback on this.
I know that mappings etc., can be done using the export and import of tpz file. So I want to know if there is any similar thing to transfer a table with data.
THanks
RamIf you do not have the client field in your table, then the table is cross-client.
IF you have the client field filled with 001, then you need to create the same entries with client 002, I dont think that you can do this with a transport.
You have to write an ABAP that reads and writes the data. -
Rename the existing table with date suffix
Hi,
I'm trying to rename a table with date suffix at the end of the table name, and drop the date suffix table which is greater than 7 days. for that I have the below sql, I have not included the drop syntax in this.
I'm not able to rename with the date suffix in the below sql, syntax error at '+'
DECLARE
@TPartitionDate date
IF EXISTS (SELECT * FROM sysobjects WHERE Name = 'IIS_4')
BEGIN
SELECT
@TPartitionDate = MAX(PartitionDate)
FROM PartitionLog (NOLOCK)
EXEC sp_rename 'IIS_4','IIS_4_'+ @TPartitionDate
ENDcreate table Test(sno int)
DECLARE
@TPartitionDate date = getdate()
declare @a varchar(200)
IF EXISTS (SELECT * FROM sysobjects WHERE Name = 'Test')
BEGIN
select @a='TEST_'+ cast(@TPartitionDate as varchar(10))
EXEC sp_rename 'TEST',@a
END
drop table [test_2015-04-23]
Hope it Helps!! -
Trying to populate a table with data from WebRowset
Hi,
I want to be able to populate my tables with data from WebRowsets that have been saved to files. Everything goes good until I get to acceptChanges(). At which point I get a NullPointerException.
Here's the code...
WebRowSet wrs = new WebRowSetImpl();
FileReader reader = new FileReader(inputFile);
wrs.readXml(reader);
wrs.beforeFirst();
CachedRowSet crs = new CachedRowSetImpl();
crs.setSyncProvider("com.sun.rowset.providers.RIXMLProvider");
crs.populate(wrs);
crs.beforeFirst();
crs.acceptChanges(con);
Results in...
java.lang.NullPointerException
at com.sun.rowset.CachedRowSetImpl.acceptChanges(CachedRowSetImpl.java:867)
at com.sun.rowset.CachedRowSetImpl.acceptChanges(CachedRowSetImpl.java:919)
I'm using Java 1.5_02. I looked at the source code for CachedRowSetImpl, and the only thing I could think of is that maybe "provider.getRowSetWriter()" in the following snippet is returning null....
public void setSyncProvider(String s)
throws SQLException
provider = SyncFactory.getInstance(s);
rowSetReader = provider.getRowSetReader();
rowSetWriter = (TransactionalWriter)provider.getRowSetWriter();
Any ideas?? Thanks!I have the same problem after setting com.sun.rowset.providers.RIXMLProvider.
Looks like a bug to me.
By the way, why are you creating a new CachedRowSet and populate it with a WebRowset (which extends CachedRowSet)? -
Using expdp to export a mix of tables with data and tables without data
Hi,
I would like to create a .dmp file using expdp, exporting a set of tables with data and another set without data. Is there a way to do this in a single .dmp file? For example, I want all the tables in a schema with data, but for the fact tables in that schema, I only want the fact table objects, not the data. I thought it might be easier to create two separate .dmp files, one for each scenario, but would be nice to have one .dmp file that satisfies my requirement. Any help is appreciated.
Thanks,
-Rodolfo
Edited by: user6902559 on May 11, 2010 12:05 PMYou could do this with where clauses. Let's say you have 10 tables to export, 5 with data and 5 without data. I would do it like this
tab1_w_data
tab2_w_data
tab3_w_data
tab4_w_data
tab5_w_data
tab1_wo_data
tab2_wo_data
tab3_wo_data
tab4_wo_data
tab5_wo_data
I would make one generic query
query="where rownum = 0"
and I would make 5 specific queries
query=tab1_w_data:"where rownum > 0"
query=tab2_w_data:"where rownum > 0"
query=tab3_w_data:"where rownum > 0"
query=tab4_w_data:"where rownum > 0"
query=tab5_w_data:"where rownum > 0"
The first query will be applied to all tables that don't have their own specific query and it will export no rows, the next 5 will apply to each of the corresponding table.
Dean -
What is the best wayt to copy tables with data from development to Prod?
Dear all,
We have Oracle tables with data in a development server, I would like to know if there is any ‘easy’ and ‘direct’ way to copy them to the production server.
As I think import and export would be the best way. Any other althernatives?
Thanks.There are a number of methods you could use.
<ul><li>
Export and import would work or their 10g+ equivalents data pump. </li>
<li>You could create a database link between the 2 databases and use SQL*Plus copy to transfer data on a table by table basis (probably quite laborious unless there's only a few tables). </li>
<li>You could use transportable tablespaces (there are some restirctions - check the documentation http://download.oracle.com/docs/cd/E11882_01/server.112/e10595/tspaces013.htm#sthref1632) </li>
<li>You could use RMAN to clone the development database (assuming the prod database hasn't been used yet and that there's nothing in it you need to keep).</li>
<li>You could create the prod database as a standby copy of the dev database </li>
</ul>
Using transportable tablespaces would be much faster than using data pump or import/export depending on how much data there is. -
Partitioning an Existing Table with data
Hi All,
I am few tables with data, I need to Partition the table without affecting existing table values is it possible?.
if yes then Please suggest me some ideas to archive that..
Thanks & Regards
SamiHi All,
I Need to partition for existing table with 1 million records
1. First partition should be created for 6 months
2.Second partition should created for 1 year.
3.So as of now we have 6 months Data in production + another 6 months data in First partition + another 1 year data in Second partition.
4.More than 2 year’s data’s should be moved other partition or archived.
kindly provide your valuabe suggestion.
Thanks & Regards
Sami
Maybe you are looking for
-
How to have rownum in a report based on a view
How to use rownum in a report or tabular form? I wanted to number the rows in a report. The most obvious way would be just stick rownum in there. There is a view in a database1. It is merely select a,b,c from various things joined together and order
-
Error on import abap phase(ecc6.0 on db2)
Hi, Iam getting error on import abap phase : the transaction log for database is full. SQLSTATE=57011. my log dirs are available space.guide me for same to resolve the issue. Thanku
-
Impossible to make the initial configuration of Shared Services Database
Hello all I am trying to install EPM 11.1.2 on a 64 bits environment (Shared Services, Essbase Plus , HFR) The installation step is done. Now I am trying to configure Shared Services through the EPM system configurator but I am not able to choose the
-
Motion control in LabView 64-bit
I am trying to operate NI Motion with a PCI-7344 card inside LabView 64-bit on a WIN7/64 platform. At this point, NI Motion will only operate in LabView 32-bit independant of 32-bit or 64-bit OS. The reason for the 64-bit operation is a 3rd part
-
My iMac screen went black and now I can't get it to turn back on
I turned my computer on this morning and everything was fine, but then my screen suddenly went black. Naturally, I looked over all the forums I could but realised mine was a unique case... Upon pressing the start up button, I heard no noise (my compu