Retrieve objects list of a remote change request

Hi guys,
someone know how can I retrieve the objects list contained in a remote change request (using rfc destination)?
any suggests,examples or solutions?
Many rgs

I answer myself...this fm sounds good "TR_OBJECTS_OF_REQ_AN_TASKS_RFC"
bye

Similar Messages

Objects are locked in open change requests during support packs update

Hi All,
We are applying support packs in the ECC Dev system. Its giving error in phase OBJECTS LOCKED..? after that i checked with ABAP consultant he given requests which i unlocked the objects from SE03. Still the same error Objects are locked in open change requests is coming.
If i checked requests which are not released, those are in hundreds which we can not release. How can i find a specific object which i need to unlock or any chance to skip the phase and continue. Because 15 days back i have updated the support packs without any of the issue.
Please suggest me whether i can find the specific objects to unlock or any other process.
Thanks & Regards,
Sreekanth

sreekanth jd wrote:
Still the same error Objects are locked in open change requests is coming.
>
Hello,
Normally when we double click on that error message 'objects are locked', system takes us to the transport requests containing those objects in question.
And did you try SE03 --> Objects in Requests --> Search for Objects in Requests/Tasks ?
Thanks

Lost CONTACT list after SIM card change requested by operator

Dear All, this is my first post, so please bear with me. I am recurring to this forum to ask for HELP on an issue that is really annoying, specially after spending over an hour with a BlackBerry Support Person who tried many steps to solve the issue without any luck [it was obvious this person did not have the technical expertise to handle the problem at hand]. Here's the story: Last week I received on the mail a new SIM card with a letter indicating I had to replace my "old" SIM card with this new one, after receiving a text message from the operator. On Friday I received the SMS and proceeded with the change. Prior to exchanging SIM Cards, I asked the Call Center Agent if this would cause any problems with my 8520 BB. The answer was NO, all the configuration info remains on the device, and not on the SIM card. Well, this was not the case and some applications lost their configuration: email and contacts. Curiously, the BBM service was unaltered. So I would like to know how can I get back my Contact List? (the email service was quickly and easily reconfigured). Apparently my old Contact list is somewhere in the Device's memory... but a New Contact List has been created after the SIM Card change. I know this because when I press the Call History, all the contacts' info is available ... but when pressing the Contacts Address I can only see 1 contact. Any ideas???? Thank You All.

This is a fun little (and I mean little) problem. Let's walk through it here.
1) Some applications lost email and contact configurations.
A) I'm not entirely sure what you mean in particular as far as the email problem goes. Were the e-mails still set up, but you weren't receiving them? Most likely because the new SIM card contained a new ID number. If you were to go to Options > Advanced Options > Host Routing Tables, press the menu button, and hit Register...that should fix your problem there.
2) BBM Service was unaltered.
A) This is because the BBM service is reliant on the PIN number unique to your device (not your SIM card).
3) Lost contact list, but still showing in the call history.
A) Your call history is just data stored on the device, the only time your contact history is access when sending and making a call is just a simple check to see if you have the information stored already to match a name to it. The data stored in history is it's own entity. I explained this in a slightly confusing manner, but it's slightly irrelevant.
It's entirely possible that your contact list was stored on your SIM card and not to your device. Try this out:
-Insert your old SIM card into your phone
-Open up your contacts and hit the menu button
-Scroll down and select "SIM Phone Book"
-Here you should see the list of contacts if they were truly stored on your SIM and not your phone.
-Hit the menu button again, and choose "Copy all to Contacts"
Once the process is complete, you may reinsert the new SIM card and continue on using the phone as normal.
Hope this helps!
Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

Change Request Management for Implementation Project

Hello gurus!
I have a problem with execution change request in implementation project.
I have created Implementation project and task list for him."Change request management" is active for this project.
I can create document Change Request, but I can not to create Correction linked with Task plan...
Dmitry.

HI,
Have you verified if your project definition is setup correctly ? Please verify with some of the steps available in the blogs
First steps to work with Change Request Management scenario
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
Change Request Management scenario: Usual questions
https://weblogs.sdn.sap.com/cs/junior/view/wlg/15116
Change Request Management scenario: Working examples
/people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
Hope this helps.
Cheers
Sh

Program To List Object in Change Request

Hi:
is there a standard program available which will list Object Technical Name and Description in Change Request?
Please let me know.
If you have custom code please send it to me.
Thanks

Hi,
There is no std program, but you can take the query element (assuming you are looking to decipher these elements) from the request and place it in SE16 > V_ELTDIR_TXT.
Hope this helps...

Version of the object using Transport Wizard and Change Lists

Hello experts,
When using the Transport Wizard, after selecting --> "Individual Objects" --> "Add Objects from Change Lists", do you know if the version of the object selected
- is the last one (aka, the version right after the last activation of the object)
- or the version of the object at the time it was added to the Change List?
Thank you very much!

Go to T-code SE10, go to the transport request you created. See all objects that are attached to your request. Now you would need to revert all the objects attached to its previous version(as you recieved before changes).
Go to each object, by double clicking on it, go to utilities - version management and see the relevant version just prior to your change. Uncheck the checkbox which is checked on current version and check the previous version checkbox and find button on toolbar which says retrieve version, click on it and once that version is retrieved go to change mode on that object and generate or activate the same.

Anyway to massively delete objects in a change request?

Under Object List of Request of the change request, there are so many entries that we find we can only delete one by one manually, is there massive deletion of all the object in the list?

Hi Kevin,
Talk to ur security person , he can add that .
Apart from that 3 options before the cancel relocation transport u will have unlock objects option.
Try this thing I am not sure it will work but
goto se01 > there is the Tools button in the second line under the menu bar > click on that .
It will also take u to the same screen but sometimes it may bypass the security and take u to the original se03 screen
Try this and lemme know
and talk to security person to add that option to ur role
Thanks
Regards
Majeed

Solman Change Request Management Issue - about create task list

Dears,
We are now using Solman ChangeRM. I have created a maintainance project and maintained its logical component and IMG project. when I want to create a task list for this project, a message"The project is not released. Hence cycle can not be created" poped. The message no. is /TMWFLOW/CONFIG_UI017. Where can I release the project?
Thanks
Roger

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Change Request Management "There is no task list for this project"

Hello!
I would like to use the functionality of CharM in SOLMAN 4.0.
When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
If I create my own task list via Task list --> create
I get the warning "You cannot change task lists in the SAP namespace"
What are the steps to define task list for my project?
Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
The second warning I get: "NO CTS projects created yet" or
"The Solution Manager project does not have an active CTS project yet".
How can these warnings/errors be corrected?
Thank you very much!
regards

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Last active change request of a object which has been transported

Hi to all,
I need a method to obtain the last active change request of a object which has been transported to the corresponding target system. I know that the CR tables are E070 and E071, but how can I know the last active and transported CR of each object? Any suggestion?
Thank you very much,
Antonio

Hi Antonio, As u are aware that you can get TR information from E070 and E071 tables.From these two tables we can get the latest TR. In table E070 there are two fields with AS4DATE, AS4TIME.So, U can find the latest transported object on these two fileds.Also, u need to check the TRSTATUS field which specifies whether the object is transported ( R Released) or still Modifiable( Active as D).
However this table will also contains subtasks and main request. This can be diffrentiated with the help of STRKORR field of E070. If blank then its a main req else its a subtask where the field would contain the Main Request No.
Hope this would be of some help for u r development.
Regards,
Swaroop

ChaRM: approving of a change request by various list of end users

Dear, experts.
Can I customize ChaRM so, that before initiating change request a support message should be approved by by various list of end users depending on component (component A - list 1, component B - list 2)?
For example some end-user wants to change established business-process. In this process are involved other end-users, so to trigger changes he have to ensure that other end-users are agree.
can you suggest any profitable solution?
thanks in advance

Hey talgat,
what you need is an action that uses pfac (it s a transaction for defining rooting rules). Thanks to this transaction you can define rules that will be based on different fields of ticket od crmd_order to assign the right person to the ticket
There is a standard action that does those kind of things called SLFN0001_ADVANCED_FIND_PARTNER of action profile SLFN0001_ADVANCED available in transaction sppfcadm. You ll notice that this action uses rule id AC13200137. Well you ll need to define your action that will be alike with your own rule that you ll have predefined in transaction pfac.
Use a copy of the standard rule AC13200137 to do your own; it will ease the task for you.
PS: this link could maybe help your understanding
Support Team Determination
Hope this helps
Regards
Khalil

Census objects in Change Request

Hi all,
I need to census all objects such as programs, tables and so on that are contained in several changes request.
Using transaction SE03 and SE09 I can to view the CR but is not easily to collect the objects modified in the same CR.
Anyone knows a easily method to extract objects from CR?
Thanks.
Best regards
Antonio

Hi Venkat,
Unfortunately the "object history" is disable in all system.
Do you know an other solution?
Thanks
Regards,
Antonio

Cp6 - Change request (locked objects should never change!)

Because of some issues I am experiencing in my Captivate project, I needed to hide a number of slides. To my utter disappointment, I found that after I unhid these slides, my locked objects/buttons lost all their "On Success: Jump To Slide actions" and defaulted back to "Continue"
I would have grudgingly accepted this behavior, if those objects were not locked but I expect that regardless of dependencies, locked objects should never change!
In my opinion, if a dependency is lost than it is acceptable for the internal logic can default to "Continue". Even better, display a publishing message stating that object x's dependency no longer exists.

If you really feel this way, then you need to log a change request at this link:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
Talking about it in a forum thread doesn't necessarily add it to the queue for any future version.

Different change request about the same object

Hi Gurus,
I have some doubts about CR (change request) from one system to another, such as from development system to quality or quality to production.
If I have 2 or more CUSTOMIZING CR about the same object Can I say that they are however identical (they contain the same information)?
For example on the customizing table:
record1 contains value 'A' --> CR number 1 is opened
record1 contains value 'B' --> CR number 2 is opened
If now I transport CR number 1 I transport value 'B'.
And the same if I transport CR number 2.
Is it correct? Both CR points to the actual value of the record?
Instead if I have 2 or more WORKBENCH CR I know they "remember" the history of the modifications:
For example on a program with only 1 istruction:
data: x.
--> CR number 1
data: x,y.
--> CR number 2
What happen If I transport the 2 CR simultaneously (selecting both from STMS) ?
What will be the result in quality/production system? Which CR "wins"?
Thanks in advance
Guido

At time of release from DEV, the current object version or table content is written into the transport data file, thus "detached" from further changes in DEV.
Now if two transport requests 1 and 2 contain the same object in two versions (older and newer) and are being imported into QA, the following scenarios are possible:
- 1 is imported first, then 2: newer version will be in QA -> OK
- 2 is imported first, then 1: older version will be in QA -> not OK
- both are imported at same time: newer version will be in QA -> OK (STMS checks when the requests were added to the import queue and sorts accordingly)
Thomas

Transport request wise Object list

Hi,
We have a list of one thousand transport requests.Now we want to know the names of objects associated with these transport request.We can go to SE09 and search for each transport request manually.Is there any other table? Or any other way out?
Thanks,
Manohar

hi,
Chk this table :
E070 - Transport system header of Request/tasks
E070A - Transport system attributes of a request.
Also there are many tables with informaton on Transport request. E* and see the list in se16.
Regards

Retrieve objects list of a remote change request

Similar Messages

Maybe you are looking for