Retrieve previously used number

Hi All,
How do i retrieve a previously used number (billing number) in transaction VA01?
I want to enable a BDC to auto create a credit limit in transaction VF01 when certain criteria of the billing number is fulfilled.
Anyone can help?
Message was edited by: Charlene Tan

The following Apple link is titled: " How to Find Your Apple ID." This is the only way you can do it. You may need to answer some security questions, and if you can't, you're out of luck.
http://support.apple.com/kb/HE34

Similar Messages

How di i retrieve previously used id/password used to update apps. used by same computer

When i'm advised that there are xxxx amount of apps. to update, I'm advised that the apps. updates require the ORIGINAL id/passord used when intirtially obtaing them. However, I have forgotten that they were now.
Woulkd be grateful for any suggestions/assistance please.
Bill

The following Apple link is titled: " How to Find Your Apple ID." This is the only way you can do it. You may need to answer some security questions, and if you can't, you're out of luck.
http://support.apple.com/kb/HE34

I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings? I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

Any SAP standard report is used to retrieve the inventory number based Asse

Hi all
Any SAP standard report is used to retrieve the inventory number based Asset ID.
Please help us to provide the standard report.
Regards
K.Gunasekar

Hi,
Create the Sort version with field Inventory no, so that you can display Inventory no details in all Asset report.
You can get "Inventory no" details by including field "INVNR" in Sort versions for Asset reporting(T.code - OAVI).
Hope this information helpful for you.
Thanks & Best Regards,
M.Ganesan

Downloaded FULL version but still asked for previous serial number as if it were an upgrade.

So I received the serial number for the standalone version of Adobe Photoshop Lightroom 5 Student and Teacher edition that I purchased from the Adobe online store. After it downloaded I received a serial number. When I installed the software and attempted to activate it using the provided serial number the pop-up box stated that the number I provided was for an upgrade version and that I needed to provide the serial number from the previous install; something that I do not have because I have never owned Lightroom before.
Before you start, I was very careful in selecting the FULL version, please see the attached image of the shopping cart which clearly indicates that I have purchased the full version. Further the email with the serial number gave no indication that I have purchased the upgrade version.
So my question is, how do I get a non-upgrade serial number that will work with the software that I have installed??

Here are the steps that I followed to purchase a full version of the software but for which I received an upgrade only serial #.
1) Logged into my Adobe ID account and sought out "Products: For Education Customers" by clicking the link products link at the bottom of my account summary page. This resulted in my being directed to the following URL:
Products
Here is a screen capture of the page which clearly states the page is for education customers.
2) Press the BUY link beside the Lightroom for Students and Teachers Edition. Please note - THERE IS NO INDICATION THAT THIS IS AN UPGRADE VERSION. Clicking the link results in the following URL:
Products
The only thing that changed is that the buy icon changed to an "Add to Cart" icon.
Here's the screen shot. Notice that it still says Products: For Education Customers at the top and there is no mention of this being an upgrade version.
3) Press the "Add to Cart" icon. Which loads a new page. Here's the URL:
https://www.adobe.com/ca/cart.edu.html
And here's the screen shot:
Please notice the price. It will become relevant when you read the chat that I had with "customer service" last night. Also, once again, absolutely no indication that this is an upgrade version. In fact, if someone at Adobe would actually look at this screen shot they would see that just below the text indicating the product's name is a line that states: "I want to buy: Full"
4) Proceed to Checkout. After providing my Adobe ID and password again I was directed to this URL:
https://store1.adobe.com/ca/cart/checkout.edu.html#null
Here's the screen shot, please notice that the content of the cart states "Full, Mac/Win, English, Download" Once again, absolutely no indication that this is an upgrade version.
5) I provided my credit card information and then received the following email from Adobe. A close reading of the message will not reveal anything about this purchase being an upgrade.
Dear DOUG TURNER,
Thank you for your purchase of downloadable Adobe products.
For your records, we have included your serial numbers below.
Adobe Photoshop Lightroom 5 (Mac/Win,English)
<serial number removed - kglad>
Download Instructions:
1. Login into Your Account with the Adobe ID: [email protected]
* http://www.adobe.com/go/ols_ww_login/
2. In the My Orders page, locate order #AD015387514 with the date January 14, 2015, and expand the order to view the details.
3. Start your download by clicking on the 'Download' button.
4. After you have completed the download process, your serial number will be displayed in the download center.
You can log back into 'Adobe Account Management' in the future to re-download your product or retrieve your serial number. Please refer to the download policy for terms and conditions.
http://www.adobe.com/go/ols_en_download_policy
For help with downloading and installing your product, visit the Download and Installation Support center:
* http://www.adobe.com/go/ols_ww_download_instructions
Best Regards,
The Adobe Store Team
A second email with somewhat different formatting but with the same details was received immediately following the one quoted above.
6) Followed the instructions provided in this message and then installed Lightroom and entered the serial number provided above once the software launched. The pop-up box then informed me that I had been provided with an upgrade serial number and that the serial number from my previous purchase of Lightroom was needed. This was the first indication that I had not been provided with the product that I thought I had purchased.
7) That's when the nightmare that Adobe calls customer service began. Here's the transcript of the 30 minute entirely useless chat I had yesterday.
For additional help, reach us at http://helpx.adobe.com/contact.html
General Info
Chat start time
Jan 15, 2015 1:59:04 PM PST
Chat end time
Jan 15, 2015 2:34:33 PM PST
Duration (actual chatting time)
00:35:29
Operator
Ganesh
Chat Transcript
info: Hi, we are currently helping other customers in line ahead of you. We'll be with you as soon as possible.
While you wait, you can try our community forums where experts are online 24/7.
info: You are now chatting with 'Ganesh'
Ganesh: Hello. Welcome to Adobe Technical Support.
Ganesh: Please allow me a moment while I look into your account & verify the details.
Ganesh: Hello Doug.
DOUG TURNER: hello
Ganesh: I understand that you have purchased Lightroom 5 and it asks for earlier version serial number while installing, is that correct?
DOUG TURNER: Yes. I specifically purchased the FULL standalone student/teacher version of LR5. I was sent a serial number but when I install the box says that the SN is for an upgrade and that I need to provide my previous SN which I do not have.
info: Your chat transcript will be sent to [email protected] at the end of your chat.
Ganesh: Thank you for confirming.
Ganesh: I will be glad to help you with information on this issue.
DOUG TURNER: Great...
Ganesh: Please allow me a minute to check the details for your purchase.
DOUG TURNER: O.K. I can provide a cut and paste of the email...
DOUG TURNER: Dear DOUG TURNER, Thank you for your purchase of downloadable Adobe products. For your records, we have included your serial numbers below. Adobe Photoshop Lightroom 5 (Mac/Win,English) 1160-4001-0579-1093-9318-8739 Download Instructions: 1. Login into Your Account with the Adobe ID: [email protected] * http://www.adobe.com/go/ols_ww_login/ 2. In the My Orders page, locate order #AD015387514 with the date January 14, 2015, and expand the order to view the details. 3. Start your download by clicking on the 'Download' button.
Ganesh: Thank you for providing details.
Ganesh: I see that you have purchased an upgrade version for Lightroom 5.
Ganesh: I will transfer this chat to our Customer Support team so you can return Lightroom 5 upgrade version and purchase full version.
Ganesh: Is that okay?
DOUG TURNER: NO, NO, NO... I specifically purchased the full version... I have a screen capture of the shopping cart to prove it.
DOUG TURNER: I was very careful to make sure that I did NOT purchase the upgrade.
Ganesh: I checked the order details again and it is for an upgrade version.
DOUG TURNER: How can I send you the jpg that shows the shopping cart that specifically says I want to buy the FULL version???
DOUG TURNER: NO. I repeat. I did not purchase the upgrade. I can prove it.
Ganesh: Order total for Lightroom 5 is $89.27.
Ganesh: You can check the cost for full version on Adobe site.
DOUG TURNER: $79 Us plus Tax. for the STUDENT & TEACHER FULL version. Give me a second and I'll copy the url for you...
DOUG TURNER: Check here -- https://www.adobe.com/ca/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_educ ation_sl_popular.edu.html
DOUG TURNER: Hit the BUY button beside light room and then add it to your cart and you will get a message stating that you want to buy the FULL version.
Ganesh: I see that you have purchased a retail version and not an educational version.
DOUG TURNER: Did you check the link???
Ganesh: Yes. I checked the link.
DOUG TURNER: Do you see the Student & Teacher edition?
Ganesh: You need to click on ''Student & teacher pricing'' to purchase a student version.
DOUG TURNER: That's how I got to the link in the first place...
DOUG TURNER: This really is not very helpful. Is there someone I can talk to? Or perhaps you can escalate this issue to a supervisor?
Ganesh: Doug, I checked with my senior on this issue.
Ganesh: You need to return the upgrade version and purchase the upgrade version.
Ganesh: You can return the current order and can contact our Sales team to get help to purchase the correct version.
DOUG TURNER: How do I return downloaded software??
DOUG TURNER: Hello??
Ganesh: I am sorry for delay.
Ganesh: Do not worry, our customer support team will help you with return process.
Ganesh: Would you like me to transfer the chat to our customer support team?
DOUG TURNER: Yes, I thought I was talking to customer support. A transfer would be good.
Ganesh: Allow me a minute to transfer the chat.
info: Please wait while I transfer the chat to the appropriate group.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
I waited as long as I could for a response from the appropriate group and then closed my browser.
*** I need this software for a course that I am taking. Please provide clear instructions on how to get this issue resolved. ***

Does the R/3 Previous Account Number (KNB1-ALTKN) field exist in CRM?

Hi
I would like to know if the previous account number field for the business partner exist in CRM and if not, if it is possible to retrieve the current BP number by calling a R/3 function module or BADI from within CRM.
In R/3 this field can be seen in transaction XD03. The value is taken from KNB1-ALTKN. I don't see where this field exists when maintaining the same BP in CRM.
The idea is to extend the searches in the WebClient UI and for the user to enter in the previous account number with the result to show the current BP Account ID.
Cheers
Declan

Hi,
I have looked into your query.
The field that you are talking about in this thread (Previous account number) is very specific for R/3 system. This field is not present in CRM system. So there are no BADIs available to get this detail on to the CRM system from R/3 system.
In a case if you definitely need this field in CRM, you can write your own code to fetch this details into the BAPIMTCS structure and make use of the same in the CRM.
I hope this helps.
Regards,
Venkat

Retrieve mac serial number from Time Machine backup

I recently had my 2007 Macbook stolen and I have no record of my serial number to report to police/insurance. I've tried looking it up from my apple ID but it's so old that the mac outdates any apple ID I've ever had. Is there any way to retrieve the serial number from a Time Machine backup?

Hi Roxpat,
It is possible to export and import selected mailboxes with the Mac OS X Mail application, and that would allow you to select only the mail that you want. Am I right that is what you want to do?
This article explains how you can do what you want -
Mail (Yosemite): Import or export mailboxes
Export the mailboxes from your older Mail application on the previous computer, then move the exported mailboxes, then import them into the new Mac's Mail application.
Thanks for using Apple Support Communities.
Best,
Brett L

I lost my itouch (4th gen.) on Thursday at 6pm, and I would like as much feedback on ways to track it. How do I retrieve the serial number?

I lost my itouch (4th gen.) on Thursday at 6pm, and I would like as much feedback on ways to track it. How do I retrieve the serial number by launching itunes?

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

Function module to retrieve the account number linked to an SD invoice item

Hi all,
I should retrieve the gl account number linked to a certain SD invoice item. The
program starts from VBRK and VBRP data. Is there a function module which
enables to get it starting from these header lines? I already used the function
module: RV_INVOICE_ACCOUNT_DETERM ( release: 4.0 ), but in some cases it
doesn't seem to function properly ( the export table TKOMV doesn't contain a
value for the SAKN1 field ). For the invoices for which the function isn't able to
retrieve the account number, the standard accounting analysis functionality returns
the following message: account determination carried out via KOFI type. So I'm
searching for a function module that's able to retrieve the account number in these
cases also.
Thanks in advance.
Adriano.

Dear Adriano,
Try with Function Module 'SD_DETERMINE_ACCOUNT_INVOICE '.
Additional Info:
BAPIs related salesorder:
BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
FM:
MB_ADD_PURCHASE_ORDER_QUANTITY (Reading and adding open purchase order quantities)
SD_SALES_ORDER_STATUS_WWW for complete details including the delivery information.
Hope this will help.
Regards,
Naveen.

I bought a new computer and downloaded my lightroom 4 to it. When I installed the program it asked for my serial number and I impujted it. Then it asked for my previous serial number from my original lightroom 3 purchase. Since I upgraded to ligtroom 4 I

I bought a new computer and downloaded my lightroom 4 to it. When I installed the program it asked for my serial number and I imputed it. Then it asked for my previous serial number from my original lightroom 3 purchase. Since I upgraded to lightroom 4 I don't have the serial number for the version 3. How do I get the serial number from my 3 version so I can activate my version 4 program

If you have Lightroom 3 still installed, you can get it from there.
If you don't and you have your box/disk, it should be on there.
IF you don't have either of those,and you registered your software, you can log into your Adobe account and retrieve it there.

Retrieve a phone number from iCloud that I deleted

Is there a way to retrieve a phone number from iCloud that I deleted a while back from my address book? I had the number in my favorites and all contacts but now I don't know how to get the number back.
I'm using Mavericks

Unless you kept a backup, no.

How to retrieve the vendor number during creation of Purchase Order?

Dear SAP experts,
For our Purchase Orders, during PO creation (t-code ME21 or ME21N) we want to achieve the following:-
1) default the delivery address to our plant A address if the vendor is local and
2) default the delivery address to our plant B address if the vendor is foreign.
At the moment, we are trying to use the user exit enhancement "MMDA0001" to achieve the above.
The problem is how to retrieve the vendor number from the screen so we could pass the vendor number to ZXM06U32 to check the ktokk field in LFA1 table in the whether the vendor is foreign or local.
Thank you in advance.
Regards,
Alex

u can do one thing, create 2 partner function, like 1 for local, and second for import vendor.
or make 2 batch n activate vendor batch and make mandatory field from SPRO.
then goto SHD0, and do one by one step. first time take 1st requirement and second time take second . like that make two variant .
i dont know how much it will be helpful. bt i want to suggest smth like that only.
or, go for ABAPER help
thanks
nisha

Alerts not retrieving the correct number of records

Hi,
I have created alerts to run plans. These plans are getting records from DB and populating the ADC. The alerts are getting executed but are not retrieving the correct number of records.
I have created 5 alerts to run 5 plans all in the same time. The error at the "Data Flow service status" window is :
CACHED RESULT
     REQUEST ID: {4EB6B955-96B3-4AF2-B836-6C9F417D47A6}
     EXECPLAN ID: {11372B4D-9ACE-4CFB-831F-11028FF996D5}
     EXECPLAN NAME: xxxx
     FIX COUNT: 0
     START TIME: 6/8/2006 12:00:01 PM
     EXECUTION TIME: 0:00:00
     Sink Records Blocks Disk Blocks Fix Count Hit Count Execution Status
     0: 0 0 0 0 0
Complete - ERROR Error while processing the data for the step 'SQL Query'
This error is seen for 2-3 plans .......
But if i execute the plan manually from design studio there is no error.
So
1. Do i need to change anything in the config files to increase the MAx memory block?
2. Is there any way, the plans can be run one at a time i.e. configure alerts in such a way that if one plan finishes the other one starts automatically? Currently i have scheduled the plans to run at the same time using Alerts..
Please help...
Thanks

Here is one 'culprit' you can verify. Open DesignStudio. You should "--not--" see any grids or icons on (near) the botton status row. If you see them - right click and delete them. These are plans with same_names put in 'locked' state. After you do this. close your design studio.
Note- if you ever open a plan in designstudio, always "save" it and close it (exit). Donot click on window [x] mark to close the appl.
After above verifrication -- restart EnterpriseLink and restart PlanMonitor, verify if everything runs fine.
--sanjeev

Need to see previous account number field in CRM

Hi Specialist's,
As part of our implementation project
There is a field in SAP r/3 ( Customer Master Data Tcode:Xd03) on Company Code Tab called Previous Account Number field ALTKN, table KNB1( Company Code Data ).
We need this information to go to CRM system.
I checked the field in table BUT000 in CRM but could not find any field containing this information.
Can someone let us know how can we see this information in CRM.
Also it would be helpful if you can tell under which screen,table and field can i get this information in CRM system.
Useful answers will definitely be rewarded with points .
Thanks,
Abhinav.

Dear RVI,
when You run the report then You can add by ALV the following two field that are hidden:
G/L Account     22     10
G/L Account     23     10
The first refers:
General Ledger Account HKONT
    This field contains the number of the G/L account to which the
    transaction figures are updated.
The second refers:
G/L Account Number SAKNR
     The G/L account number identifies the G/L account in a chart of
     accounts.
I hope this helps.
Mauri

Retrieve previously used number

Similar Messages

Maybe you are looking for