Retrieve steus (control key)

How can I retrieve steus or the control key using order?
The structure that holds the control key is AFVGD-STEUS and I can't find a link to AFRU-AUFNR.

go to structure AFVGD.
and select the filed STEUS .
Check the corresponding dataelement.
and then use the whre used list option for that data element.
it shows all the tables. then u can find the table which is linked to the AFRU table.
Maybe it will help you.
- Selvapandian Arunachalam

Similar Messages

Retrival of Control Key of Operation & Table underneeth the structure

Hi Experts,
Right now i'm working on PP and PM related stuff, I'm in the middle of the project and stucked down at a point in how to retrive the control key of operation that triggered the update in production order: opoerational view. (CO03).
Also i have a small question on how to findout the underlying table for a particular field(any field in a screen), when done F1 on that particular field the technical details says as table name but it is actuallya structure. So how should i find the table underneeth the structure where the particular data is being stored.
Or how should i retrieve the data if i couldn't figure out the table, is there some way that i can retrie the data using the structure.
Thanks for your contribution.
Regards
Rich

Hi Rich,
This is a common problem.One of the best and easy way is use the transaction ST05 for trace.lemme explain in detail.
1.go to ST05 transaction
2.switch trace on
3.take your screen where the field resides
4.enter value in this field and other required field
5.then save the screen
6.go to ST05.
7.stop the trace
8.click on display trace
9.you will get a detailed log what all happend
10.search the log with 'update' or 'insert' word or search with the field.
11.you can find some table name.
12.check that table contains the record which you saved.
Sure this will help
Another Way
1.go to transaction se84.
2.take ABAP dictionary
3.go to Fields
4.Give the field name in table field /structure field
if you are lucky you will get in this
Regards
Shibu Kurian

Control key stuck

I recently purchased an X131E.
It's great but after an hour or so of being turned on it acts as if the control key is pressed, and makes it hard work using Office, IE etc...
A re-boot resolves it, but it just happens again soon after. I'm sure the key is not stuck, what could be causing this? How can I resolve it?
It's not the sticky keys as I have disabled that after trawling other forums
Any help appreciated.
Would this be covered under the warranty?

Hello Maido,
This could be a driver issue, try downloading the Update Retriever 5.00 tool, it will let you know if you have any driver updates, Its located half way down the site. With Update Retriever, you can manually initiate the search for update packages, or schedule an automatic search for new update packages at a specified time interval. Here is the System Update Solution Deployment Guide.
Update Retriever first time setup
When you launch Update Retriever the first time, you need to set up Update Retriever. To do the first
time setup of Update Retriever, do the following:
1. Launch Update Retriever.
2. On the Welcome screen, specify a repository folder and set the logon information by doing the following:
    a. Type or browse a repository path for the share drive used as the network share repository in the
        Repository path field.
    b. Type a user name and password for the share drive used as the network share repository in the
        user name and password fields.
3. In the Get new updates panel, click Add.
4. In the Add new systems window, set the triplet information for a system by doing the following:
    a. Type the applicable machine type. You can find the machine type on the bottom of a notebook
        computer or on the rear of a desktop computer.
    b. Select the applicable operating system.
    c. Select the applicable language.
    d. Click add and then click Save.
5. In the Get new updates panel, select the check box next to the applicable machine type you want to
    search for update packages.
6. Click Next and then click Finish to search for the applicable update packages. Update Retriever will
    place the update packages in the designated repository folder.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Control key tables..

We have developed a report involving control key and Qty confirmed..
There is a bug in the report that the quantities are not getting fetched correctly as that of in COOIS -confirmations.
SO for analysis we need to search for the tables... Can anybody tell me the table name that contains the Control keys and the quantity of confirmation, order etc..
Please help me out...

Hi,
The contril key field is STEUS and you will find in following tables
AFVC                             Operation within an order
CRHD                             Work Center Header
PLPO                             Task list - operation/activity
T430                             Operation/Activity control key
TABLO                            Assignment table-orders to activities
RegD
Shekhar

Media controls keys does not work on iTunes?

My keyboard has those "Media Controls Keys" on it (just like Play or Stop etc.) but it won't work with iTunes, unless iTunes is on the front of all windows. I used to use Windows Media Player and it can work with the Media Controls Keys even the player is minimised. Are there any ways simply changing settings with iTunes and solve the problem?

Hello,
I don't have a W541 myself, but here are a few things to check, in no particular order:
Have you checked with your IT department? Maybe they set a poilicy to disable the card reader.
Is the card reader correctly enabled in the UEFI firmware?
Have you run ThinkVantage System Update and Microsoft Update to confirm all of the various Lenovo and Microsoft updates are installed?
Do you still have the OS image the device originally shipped with? If so, does the card reader work under that?
Regards,
Aryeh Goretsky

Control key (^) combined shortcuts does not work on mac book pro

All shortcut combinations with the control key (^) do not work. I´m using Mac Book Pro 13 (late 2013) with Os X Mavericks 10.9.4

The Logic Board is the Main system board. In the Windows world better known as the Motherboard. Except with Apple Mac computers the CPU and the GPU are Soldered to the logic board and if it is a Retina screen model the RAM is also Soldered to it.
So replacing the Logic board is like replacing the compete system and costs accordingly.
But there isn't much else you can do if you can't get that switch unstuck. Or just go without sound from the built in speakers. They aren't that good anyway.

Office 2013: can't retrieve the Product Key via Belarc Advisor

Hi,
Isn't it possible anymore to retrieve the Office Product Key installed on a computer via third party inventory software such as Belarc Advisor? I used to do that to see the Microsoft Office Product Key installed on a computer for previous Office versions.
However, I tried with a computer where Office 2013 Home and Business is installed and Belarc Advisor didn't show its Product Key. Is it due to the new license management that consists of linking it to a Microsoft account and only entering the account credentials
during the installation process instead of the Product Key? Isn't the Product Key stored somewhere on the computer anymore?

Hi,
Thanks for your answer although it's a typical half useless reply from an official Microsoft staff...
Actually, I understand that Microsoft doesn't support third party software to retrieve a product key but my question was rather technical and driven by curiosity rather by the need of retrieving the product key. Indeed, I took over a computer park in a company
and I'm performing an IT inventory. During this inventory, I retrieve Windows and Office Product Key. The licenses are genuine but since I'm not the one who purchased and installed these computer, I don't know them. Therefore, a simple solution is to use inventory
software such as Belarc Advisor. But I noticed that it can't retrieve Office 2013 Product Key anymore whereas it was able with previous versions of Office.
So to reformulate the question: isn't the Product Key stored somewhere locally on the computer anymore with Office 2013? Because if no, that would explain why third party software can't retrieve it anymore.
My question is rather technical about the new way of managing Product Key with Office 2013 and driven by curiosity. So I don't need any official technical assistance.
Thanks

HELP! Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command.

HELP! Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command. Thanks.

If you select all the songs you want to change, Be it one song or an akbum, or an Artist, Or Genre, or playlist. Then Right mouse click and Get Info. You then get a slightly different from normal Get Info box as this is the One for Multiple items.
In there have a look at the tags and see if the one you want to changes is in there. There are a few tabs so if for example you wanted to change the Media Type from Home Movie to Movie go to the Options tab and select Movie and OK and it will change the whole selection.

Purchase order does not contain a confirmation control key

Hi expert
I have not set any confirmation control key in Purchasare order, still at the Migo, system is showing error at depot.
I have check the same thing with manufacturing plant, system dont show me any error.
Regard
Nabil

Hi,
I f the confirmation control key is maintained in PUR.info record is automatically will fetch into PO though you have not selected manually in PO. The CC maintained in vendor master or PIR can copy into PO. In your case please see whether inbound delivery is needed to perform GR? CC implies many types of confirmations like order acknowledgement, advanced shipping notification or confirmation of delivery dates. Please see specifically to the error. Try to know the type confirmation system needs to post GR. Thanking you.

MIGO error 'Purchase Order does not contain a confirmation control key'

Hi,
while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
Still why this message coming, what setting would be bringing this message
Please clarity

Hi,
Until the installation of Note 589422 (with SP SAPKH46C43) you could due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.
This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
589422 Several inbound deliveries can be created with MIGO :
"Implement the program correction.
With Transaction SE91 create message M7394 with the message text:
Purchase order & & does not contain a confirmation control key".
After you implemented this correction, when you want to create an
inbound delivery with Transaction MB01 or MIGO or with
BAPI_GOODSMVT_CREATE and if the purchase order does not contain a
confirmation control key the system displays error message M7394
"Purchase order & & does not contain a confirmation control key".
Hope this can explain the error you met.
Regards,
Mauro

What can I do to prevent the control key from not working in the future?

Background:
I bough an macbook pro about 1 year and 3 months ago and after 9 months of usage my control key stopped working for about an hour or two.This happened every time I turned on or awoke my mac from sleep (lid down).I sent it to an authorized apple service center and they replaced the keyboard.Everything was fine for about 4-5 months when the same thing happened again, ctrl key stopped working but this time not when turning on my mac but at random times and for random intervals.I sent it again to the service center but they told me that this time it won't be for free because my 1 year warranty has expired.I should mention that in European Union and Romania (the country where I am from and from which the mac was purchased) the law is that any electronics device sold has to come with at least 2 years of warranty.Apple seems to ingore this law.
Anyway, after long conversations with apple uk on the phone they agreed to pay for the keyboard but not for the labor which was 70 eur ($100).It's not much but my 2 year warranty should have covered it.The sad part is that I have no guarantee that it's indeed a keyboard error and not something else, this might happen again in 4 months and I doubt this time apple would agree paying for the keyboard (which is 150eur) ($215).
I should also mention that before calling apple uk I tried apple's romanian number (listed on their site) and it didn't work on the 3 phone networks that I've tried (2 fixed and one mobile) which led me to believe that apple support is in fact a big joke.
Suffice to say that I will no longer purchase any apple devices or software, I regret purchasing mac os x lion just a week ago, when I will no longer use it because I intend to sell all my apple gear (timecapsule, iphone4, macbook pro) and buy stuff from companies that value their customers and respect their contracts.
My questions are this:
1) why does apple ignore EU and Romanian law?
2) what can I do to prevent this from happening in the future
3) can I request that my macbook be more thoroughly inspected? I suspect the keyboard is not the main problem and it will soon happen again as it happened two times already.
4) can I do something for the repair labor charge to be waved? It is illegal in my country to ask for one in this scenario...

Everyone reading your posts here is just another MacBook Pro user. We're all volunteers, not Apple employees. No one here can speak for Apple.
In my personal opinion, buying Apple products in a country where Apple has no stores and no corporate presence is a risk that the buyer takes knowingly. I don't think it's a wise risk, and I don't recommend that anyone take it. A small percentage of the products sold anywhere are going to have problems, and it makes more sense to buy an inferior product that can at least be serviced locally than to buy a superior product that may have to be sent thousands of miles for repair if anything ever goes wrong with it.

Control key no longer works after update.

After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
This is left control key though. Right still works?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Confirmation control key check for inbound delivery creation

Hi,
Currently, in the Client's company, the process of receiving goods from purchase orders looks like that (SAP-wise):
- create a purchase order,
- receive goods using MIGO and automatically create an inbound delivery,
- pack the delivery and post goods receipt.
Recently, some patches have been installed, including one described by note 1602047 (which basically enforces checking confirmation control keys if goods receipt assignment and goods receipt relevance are activated for inbound deliveries). Note says that it only affects two-step stock transfer and creation of automatic inbound deliveries using SPED output but it seems it also affects other basic processes like PO receipt in MIGO.
Now, when using the old control key (that had MRP-Relevant and GR-Relevant fields checked), the system is unable to automatically create an inbound delivery after the goods receipt is posted with MIGO (with message VL148 - Not possible to create an inbound delivery). I learned that this is because the "GR Assignment" field must be checked in the confirmation control key so it's possible to automatically create aninbound delivery after receiving a purchase order in MIGO.
After changing the confirmation control key to have the missing field checked it's not possible anymore to receive goods from PO in MIGO as the PO requires shipping notification in order to be processed in MIGO thus requiring of manual creation of an inbound delivery.
Is there any way to skip this check so the process would remain the same (this model has been working fine for few years in the Client's system) and the inbound delievery would be created automatically after posting the receipt in MIGO?
Thanks in advance,
Piotr

Hi,
don't know if you found a solution, but we received the following message from SAP:
The advent of the new version requires some attention to the users. It
was necessary to avoid inconsistencies which in the past version the
system was susceptible.
Main Program SAPMM07M
Source code of MM07MLVS
sy-msgid VL sy-msgty E sy-msgno 148
I have checked the process and through debugged I could confirm the
following information SAP is providing to all similar incidents reportedfor us:
Error message VL 148 is issued if in the confirmation control key used
in the purchase order, the fields for MRP-relevance (T163G-KZDIS),
GR relevance (T163G-WEREL) and GR assignment indicator (T163G-WEZUO)
are not set.
The correction of note 1602047 was necessary to avoid inconsistencies
(table EKES) in the purchase order. Without having the GR assignment
(T163G-WEZUO) set, there is no unique reference created between the
purchase order history (table EKBE) and the inbound delivery
confirmation (table EKES) at goods receipt which leads to a problem if
several inbound deliveries exist for the same purchase order.
If you set T163G-WEZUO to 'X', this assures that, for an inbound
delivery, the confirmation record (EKES) belonging to this inbound
delivery (EKES-VBELN) is also accurately updated at goods receipt.
How to solve the issue?
Use a confirmation control key with the GR assignment indicator set
and then create the inbound delivery with VL31N. If you want to be able
to create the inbound delivery with reference to a certain line item in
the PO, use transaction VL34.
If you still want to use transaction MIGO, there is the following
workaround:
- Create a purchase order without any confirmation control key
- Create a goods receipt (GR) in transaction MIGO with reference to this PO and post the GR to a non-HU-managed storage location
- Create a transfer posting with MIGO using movement type 311 to
transfer the goods from the non-HU-managed storage location to the
HU-managed storage location.
As the transfer posting is an additional step for the user, the whole
process could be automated using a partner storage location
(T001l-PARLG) for the GR which then triggers (through a modification)
the BAPI 'BAPI_GOODSMVT_CREATE' to create the transfer posting without
user interaction.
I hope to have satisfied you on the reason why it is now happening and
also I believe you can explain to business that it is a new behavior
necessary done from SAP side to avoid worse situations, we are aware of
potential dissatisfaction it might cause. SAP Support is always
available to clarify any issue.
Sorry for not having a more positive answer.
I hope it helps!
Leentje

Activation of Bank Control Key field (P0009-BKONT) in IT 0009

Hi,
We got a requirement to activate Bank Control Key field (P0009-BKONT) in IT 0009 for the Countries Barbados, Dominican Republic and Trinidad & Tobago.
For activating this field, we copied a new screen for each country for IT 0009 and made the field P0009-BKONT as Standard in T588M (Screen Modifications). Updated the feature P0009 also.
When checked IT 0009, Bank Control Key is not found. Again, we have added the entries for these countries in table V_T521A (Bank details: Relevance of special fields) by selecting Control Key as Relevant.
Still no luck. Bank Control Key is not seen in IT 0009.
Can someone help me by providing solution how to activate field P0009-BKONT for the above countries. Thanks !!

Hi Sai,
You mean system uses this new screen but you don't see the field on it?
If this is npt the case and system does not select the right screen check the feature P0009 in PE03.
Regards,
Omid

Need create a new control key, which message control is "error mode", then PR or PO

Hi All,
Can please help me I got an issue in QM ,
Issue Description :- Current QM control key for supplier validation date is “0001”, the message mode is only warning. PR or PO still can be created forcibly. Need create a new control key, which message control is “error mode”, then PR or PO cannot be created successfully.
I thing should add some additional logic using BADI or USER-EXIT.
can please help me how to find BADI or USER-EXIT if you know the appropriate BADI please let me know.
Regards,
Nani

Hi,
I tried that way I entered message control as Defect even purchase requisition is created how can I restricted purchase request ion.
Regards,
Nani.

Retrieve steus (control key)

Similar Messages

Maybe you are looking for