Retrieve the host name behind the radware url

Hi,
Is it possible to retrieve the host name behind the radware url in BI Publisher template?
Thanks, R.

Hi,
Did you maintained the entry in below format
12.123.23.23 srstfdf srstfdf.shouse.com
in hosts file. If it is already maintained in the above format. then check the error if it is DNS related maintain the entry in DNS.
thanks,
madhu

Similar Messages

Changing the host name of the server - impact on old Urls

All,
We are in the process of moving data centre and as part of this the host names of the BW servers will be changed and pointing to the new IP address, how and what configuration at BW server level to make sure all web reports points to the new host name when the url is generated.
Thanks

looked at the note 805344 and that helped me to understand...

Getting the host name in the email subject line

I am running SCOM 2012. Is there a way to have the host name of the server in the Subject line of an email?

As alerts dont always have a servername included. ie Alerts usually have the name of the server or source included in Source or Path you might want to include both in the subject.
Here is what we use but you can add the lines found in the body to the subject:
Source: $Data[Default='Not Present']/Context/DataItem/ManagedEntityDisplayName$
Path: $Data[Default='Not Present']/Context/DataItem/ManagedEntityPath$
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

HT201320 I have an email account through yahoo. I am having trouble setting it upon my iPhone and can't receive or send emails!!!! I contacted Rogers and they said I need to find out the host name of the incoming server, in other words yahoos host name. H

I have an email account through yahoo. I am having trouble setting it upon my iPhone and can't receive or send emails!!!! I contacted Rogers and they said I need to find out the host name of the incoming server, in other words yahoos host name. Help!!

Yahoo's servers are notoriously unreliable. Use the "Yahoo" account type when setting it up. If it doesn't work, and you are positive the credentials are correct, wait a while and try again.
While you're waiting, set up a free gmail or iCloud email account.

How do I "scan" my LAN and find the host name of the server computer?

I need to scan my LAN to find out the IP and host name of the computer in which is waiting for client acceptance because the server side of my program is not always on the same computer. Therefore, the IP and host name of my server is not final and can be placed on any computer on my network with over 50 connected computers. How might I check to see which computer is waiting for a client?
EDIT: I need the host name only, disregard IP
Thanks!

watwatacrazy wrote:
jwenting wrote:
Peter__Lawrey wrote:
If you know the port you can try to connect to each of the machines in turn.the people getting firewall warnings about intrusion attempts would just love that, as would the network admins whose network you're clogging with traffic (imagine several hundred clients doing that all day long, let alone tens of thousands).
If they are all one the same subnet you can use the IP addresses.Which you don't necessarilly all know. Or do you propose just sweeping through all possible IP addresses in the subnet's range? That would be a sure trigger for your network admins to immediately kick you out.
This should take a few seconds at most.Until the automatic safeguards kick in and you're thrown off the net :)In that case, what would you suggest?Not to bother. The server address should be part of the application configuration, not guessed at runtime.

Changing the Host Name in Lite Database

Hi,
I am using oracle 10g Database release 2 and oracle 10g Lite Database Release 3
OS is Windows 2003 Server
I changed the host name
“Old Name Oracle10g New Name OracleTENR1”
Also change the host name in Listener.ora and tnsname.ora after that i restart the machine
I checked the Database status (it is in OPEN STATE only )
And then I start the mobile server it's not working ….
How to change the host name in the oracle 10g Lite Database ?
Please Advice
Thank U
SHAN

hi,
Thanks Fot the Reply ......
I have changed the hostname in webtogo.ora
Mobile Server is Working...
But the Problem is "with the Browser http://localhost/webtogo it shows this error message in the Screen"
500 Internal Server Error
java.lang.NullPointerException at oracle.lite.web.util.TaggedHtml.parse(Unknown Source) at oracle.lite.web.util.TaggedHtml.init(Unknown Source) at oracle.lite.web.WebtogoLogonPage.init(Unknown Source) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:119) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)
Please Advice.....
thank U
SHAN

How to get the Host name of Unix server

Hi all,
I am need to use the Host name of application server for some purpose.
where can i see the host name of the unix server ?

SYST-HOST or SY-HOST contain the name of the application server.
You may also use the following internal call to get the actual application server
call 'C_SAPGPARAM'
     id 'NAME' field 'rdisp/myname'
     id 'VALUE' field servername.
For the IP adress
CALL FUNCTION 'DB_DBRELINFO'
    IMPORTING
      dbinfo = dbinfo.
READ TABLE kernel_version INDEX 11.
kinfostruc-ip_address = kernel_version-data.
Regards

OracleVM Manager template 2.2.0 trying change the host name

Hi,
I have installed the OracleVM Manager 2.2.0 template
into an OraclVM Server 2.2.1.
Reading the OracleVM Manager 2.2.0 install
instructions "Readme_for_Media_Pack_B59146-01.txt" and doing
the installation in the interview area, I am asked
to provide the fully qualified domain name as the
name of the OracleVM Manager.
Therefore, I provided something like this.
ovmmanager.mydomain.mytopdomain
Later, when I was in the OracleMV Manager,
I noticed the following.
Correct information was written in my /etc/hosts file.
192.168.1.160 ovmmanager.mydomain.mytopdomain ovmmanager
The case seems however, that unusual information
was written to the /etc/sysconfig/network file.
HOSTNAME=ovmmanager.mydomain.mytopdomain
When I type "uname -a", the results are shown.
ovmmanager.mydomain.mytopdomain
I say, "unusual", because most people prefer a single
name "ovmmanger" to be the host name.
I have tried to permanently change the host name of the computer by
changing the contents of the /etc/sysconfig/network file to the following.
HOSTNAME=ovmmanager
Next, at the command line I would type the following.
hostname ovmmanger
When I type "uname -a", the results are shown.
ovmmanager
However, every time I do an 'xm shutdown' to the
OracleVM Manger (the ovmmanger), and then later do an
'xm create vm.cfg' to start the ovmmanger,
when I type a "uname -a", the results are shown.
ovmmanager.mydomain.mytopdomain
When I look at the contents of the /etc/sysconfig/network file
the contents are back to the original contents.
HOSTNAME=ovmmanager.mydomain.mytopdomain
instead of my preferred contents
HOSTNAME=ovmmanager
My first question is the following.
By design, does the OracleVM Manager 2.2.0 template
supposed to have a host name to be a
fully qualified domain name?
ovmmanger.mydomain.mytopdomain.
My second question is the following.
If the situation is satisfactory to have just
ovmmanger
as my host name, then how do I prevent the host name renaming
process to reoccur every time I do an 'xm create vm.cfg' to start
the OracleMV Manager?
Thank you
AIM

First Question: No, it does not have to be a full qualified hostname. As long as the hostname is resolved in your network short qualified is fine.
Second Question: You don't have to do anything. In OVM Template design the configuration tool is just called the first time your template is started. All succeeding startups will not go through the configuration again. (There is however an option to reenable/reset the VM that the configuration is called again).
Regards
Sebastian

How to find the host name of a client?

Iam doing a project in grid computing. I have developed a client-server program. In that program I have to get the host name of the connected client. Can anyone tell me the code to do that?

sure...
Its the .getInetAddress().getHostName().getPort() methods...
Good Luck.

Can I get the host name of my local machine?

I've got a webapp that needs to send the host name of the machine it is running on to the client side.... I can't seem to find any way to find the host name through Java.
Or will I perhaps have to make this a propery to be set manually?
/J

sij17tad wrote:
Use JSP Program
<%
out.print( request.getRemoteAddr() ); //This command display IP AddressOf the client, not of the server.
out.print(java.net.InetAddress.getLocalHost().getHostName());//This command display System Name
%>This answer is already given 3 years ago, dude.
In the future please respond to active topics only and do not resurrect old and dead topics.

How to set dynamic host name in the URL of a URL iView?

Hello,
I am using a standard URL iView that points to some J2EE app I've written and deployed on the same server.
I would like to set the host name to be a dynamic one, this way I won't need to change the iView URL when transporting it from one portal to another. As far as I know the system for a URL iView only controls authorizations but cannot replace the full URL set in the iView.
Any idea who can this be achieved?
Roy

Hi Mrityunjay,
forced URL at runtime will require me to call the URL iView from another iView that I will need to code (setting the URL in the Request object). If I did all this I might as well call it from this iView already.
I would like to do it with no further developments. I would have thought that SAP has constants that can be plugged in the URL for this type of thing, i.e. $hostname...
Rgds,
Roy
Edited by: Roy Cohen on Aug 21, 2008 4:03 PM

Host name in the getConnection statement.

HI,
I am trying to use JDBC to access Oracle database. I used the following statements to register the driver and get the connection:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn=DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:test","SYSTEM", "manager");
I have the database called test. I can compile the code correctly, but when I run it, it says "Invalid Oracle URL specified". I am not sure what to use for the host name. I checked the listener.ora, and the port number is 1521. I have the oracle8.1.7 installed on my windows2000, so I believe it is running as a windows service. Can anybody tell me what hostname to use? Thanks a lot.

I tried to add the statement to the init.ora file which is referenced by the inittest.ora file, and the error message changed to the following: (By the way, am I supposed to modify anything in order to use JDBC, or it should be fine after it has been installed?) Thanks.
Exception in thread "main" java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.O3log.receive1st(O3log.java:428)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:248)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:249)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:36
5)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:177)
at JDBCExample.main(JDBCExample.java:10)

How can I use JDBC to get the db name in a db url ?

Hi,
My program needs to read a database url from a txt file and connect to the specify database. And my program also needs to know what's the database name. So DatabaseMetaData or Driver can retrieve the database name from the url ?
Please brief me about that.
thank a lot.

You need to write a java program to read the text file with buffered streams. Then you need to use this file as a bean.
In the same file you can have connection to your database.
get theconnection and related things in your web application.
Thanx,

Change IP and Host name of the server

Hi,
Db :11.2.0.3
Os:Aix6
OS team are going change IP address and host name of the server which has ASM and DB.
What are the things we need to follow for this?
Thanks & Regards,
VN

OS team are going change IP address and host name of the server which has ASM and DB.
What are the things we need to follow for this?1. TNSNAMES.ORA files everywhere
2. LISTENER.ORA on server
If there are thin JDBC clients, change IP/hostname in their connection URLs.

How do I get Mozilla to use the page name for the actual bookmark name instead of the URL when I bookmark a page

I just noticed this (in comparison to Internet Explorer): In IE, when you favorite a webpage, it uses the actual name of the webpage (for example, for this page, it would be "Ask a Question Firefox Help" as the bookmark name), but in Mozilla it uses the URL address as the bookmark name. I was wondering if it was at all possible to change my Mozilla settings in order to make it use the webpage name as the bookmark name instead of the URL address? I hope everyone understands what I'm getting at? If anyone can help me, I would really appreciate it. Thanks.

Does this happen with each bookmark?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

Retrieve the host name behind the radware url

Similar Messages

Maybe you are looking for