Retrieve worhk time of employee

Hello Experts,
I have an emplyee(PERNR) and i want to retrieve giving a day, the time schedule, i mean
If is 13/10/2009 and teh pernr is 20000--> the employee works from 8:00 to 14:00
Can anyone tell how to do that?
Thanks!

Ok, but, my request, is inside a ABAP program is to check if the a time is inside the worktime of the employee.
Thats the reason im looking for a function
Thanks!

Similar Messages

HT201250 is there any way to retrieve deleted time machine backups?

is there any way to retrieve deleted time machine backups? it has now deleted the oldest, but most important backup. It was made right before before upgrading to mountain lion. Because I had some issues with placing the files back the way I wanted, I had to connect my hard drive to my mac several times. Result, everytime I did so, a backup was made. Like today, when I was transferring everything from that specific backup. But in the meantime Time Machine made a new backup, deleting the old one I was using. Ironically, I lost everything while I was transferring the files back to my mac. Please give me good news.

Once the external hard drive that you use for Time machine deleted its oldest backup and overwrote it, the ability to retrieve those files disappeared. They are gone for good.
Hope this helps

Does Time Capsule back up everything on my computer? If I inadvertently delete photos from iPhoto can they be retrieved from Time Capsule?

Does Time Capsule back up everything on my computer? If I inadvertently delete photos from iPhoto can they be retrieved from Time Capsule?

About TM "Backup Drive is Full"
Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.
Also, see Pondini's Time Machine FAQ

Retrieve Computer time in microsecond

to retrieve computer time i use the function System.currentTimeMillis() but i need the time in microsecond. how could i get that?

<snip>
Java 1.5 added nanosecond methods for hardware/OS
combinations that can support it.Which at current includes none at all :)<snip>
Are you saying that System.nanoTime() isn't supported at the present time?
That's not correct - I am running a 3 GB Pentium 4, a relatively recent GigaByte m/b and XP Pro, and get very good microsecond and submicrosecond results from the method.
I executed 2 consecutuive calls to the method, like so
startTime = System.nanoTime();
estimatedTime = System.nanoTime() - startTime;and averaged 100 repetitions.
Results vary with the manner in which the jvm is executed. Here's a summary of results, to give a feel for what's possible.
Program Execution From        Nanoseconds (average)
Commandline                     1300
CrimsonEditor                    500
jEdit                            700
NetBeans IDE 4.1                1050So, depending on the method of execution, nanosecond precision ranges from 500 to 1300 (0.5 microsecond to 1.3 microsecond). Accuracy (repeatability) is not as good - there are outliers in the individual times, probably due to Garbage Collections. However excluding those outliers, times appear reasonably repeatable.

Lost notes and contact in iTouch cannot find on back-up, how to retrieve from Time Machine

Hi! I reset my iTouch coz it's having some problems after I update my OS. Now I restored everything except my notes and contact. Tried to check from back-up but I cannot find the old back-ups just the new one...can I retrieve it from my Time Machine?...Please help...Thanks!

Hi lllaass,
Thanks for the tip. Sorry, I am not that familiar with computer stuff...I see filenames with combi of letters and numbers...can I know the next step after this? Thanks...

Hard drive died on my iMac how to retrieve from Time Machine

HI,
My Hard drive died on our iMac (we were on Snow Leopard). We replaced it with a larger Hard drive and the Tech put Lion on it. Sorry if this is a dumb question, but how do I retrieve my entire back up from the Time Capsule.... I search and read something about a Recovery HD? Do I have to have this? Also as noted above, I have the Snow Leopard from when we got teh iMac, but are on Lion now.....
HELP

LOL - I think I have a different/new related problem....
The instrucitons don't say anything about timemachine, but I read somewhere that you need to stop a back up when you get a new computer and want to transfer files.... and that the migration rebuilds the data from the latest successful back up...(thats a little back ground).
Where I am now:
last night the migrations said it would take 29 hrs. No problem....this morning there was not much change in that (considering 8+hours had passed) but did not think much of that either...
I was browsing on the internet and suddenly I get a notifiaiton that the back up failed! oh god I think - surely its not supposed to back up while its migrating....?!?
then a few minutes later the migration window says it has 49 hrs to go...
then a little later it says its finished...so I check the folders - nothing is there....so I start to get a little concerned....and decide to start over.
so I start the migration process and when I get to the window where it asks where to put the stuff from the migration, I assume I am doing the same thing so click the same thing I did last time and it tells me you already have stuff there...wha? but I just checked...there is nothing there - so I know I am doing something wrong and back track - AHA - it has put everything into a user account called XXX. so I decide to log out and see what's happening....sure enough another user account has appeared....and it has the same icon as our old stuff ! yay...!
but heres the rub: we previously only had 1 user account for the whole household, with one password which we did not even have to use....when the hard drive crashed, the repair guy created a user account under MY name, and used our old password. Did not think much of it but when I logged out as ME and tried to log is as US (the old User Account), it would not accept the old password!...So now what....?

Photos in 1 Event disappeared--how to retrieve from Time Michine

This is scary, I just noticed that in one of my Events all but one of the photos has vanished. There were probably 50 in that event previously. Fortunately, I do have Time Machine connected. But with iPhoto decidedly non-user friendly format, I have not idea how I would try to retrieve a backup of that one Event only.
Thanks,
John

Launch iPhoto and under the file menu ==> browse backups - find the time that the photos were there, select them (or the entire event) and click on restore
LN

Table to retrieve one time vendor details?

Dear Folks
Can any of you advice from which table can I retrieve the information of all my one-time vendors?
I need to retrieve their addresses, contacts etc.
Best Regards
Junwen

Also,
you can get the list of vendor number from LFA1..
pass LFA1-adrnr to ADRC and get the relevant address

How can we integrate CATS & PPM and to retrieve CATS time recording data in PPM ?

Dear experts,
Following the previous question of Ruxandra Petrina called "record times with CATS", I am facing an issue with the report DPR_CATS_CPR_TRANSF : it shows nothing despite I activated PPM accounting integration.
There are the steps I followed, I really don't understand what is missing. In PPM I can transfer and assign my projects to WBS elements automatically or manually.
1. We allowed time confirmation for projects
2. We replicated personal number as business partners
3. We activated worklists and project assignments @ data entry profiles
4. We set up ALE & RFC connections
5. We activated the integration scenarios on WBS element : automatic and manual creation of WBS element assigned to PPM elements. Then we set up data profiles for time recording in cat2.
6. We enter times, we released it (approval is not required) + saving
7; We launch the program in SE38 of both ERP or SOLMAN systems : NOTHING appears.
Our goal is to see the times recorded in CATS in the Confirmed work field of PPM.
Can you please help me out with this issue ?
Many thanks in advance.
Best,
Cassoké

Hi Cassoke,
If tasks assigned to a user is not listed in CAT2 worklist, then first we need to ensure that the tasks are displayed in the worklist. So the user confirm the times for the tasks using this list and after that only we should be running the report 'DPR_CATS_CPR_TRANF' to transfer the actual times entered by user in CAT2 to PPM project task.
To integrate CATS with PPM, you need to follow these steps.
Customisations:
1) Enable 'Time recording' for tasks & 'Account integration' in project type
2) Customisation related to 'Accounting integration' to be carried out (either single object / Hierarchical controlling, for testing better to use single object - Internal order, since it is easier)
3) Create a time sheet data entry profile
(Refer thread Record working times with CATS for details)
4) Ensure all object links(internal order / WBS) RFC destinations are updated correctly.
Master data:
Business partners creation with BUP003-Employee role & link to HR personnel number
(This is not required if HR integration is activated, since the system creates the BP's automatically. But manually we need to validate the BP's for linkage with few users)
Project:
1) Create project using customised project type (where time recording/accounting integration is enabled)
2) Structure the project with phase/tasks
3) Update duration/work etc., to the tasks
3) Create project roles & staff a resource (BP which is validated for HR personnel number linkage).
4) Assign task to project role with resource in Project role-->task tab
6) Release the project definition and also check for phase/tasks release
7) Change the status of project definition to 'Flag for transfer' (Can be done before project release also)
8) Check whether the internal order / PS project with WBS is created in ERP system(Based on customisation) and linked to project. Check can be made in accounting tab of the project. (If it is not created, then check for object link RFC destination correctness)
In case of automatic internal order creation process, you need to enter the org unit. data in project definition-->additional data of the project.
CATS:
After completing all the steps, the task assigned to the user will appear in the CAT2 transaction.
1) User can confirm the task with actual hours.
2) Run the CATS transfer report mentioned above to update the data in PPM project.
About SOLMAN integration, you can refer to this presentation also.
http://www.sapsa.se/wp-content/uploads/2013/09/9.-ITPPM@SAPSA_131119_IngoPfeiffer.pdf
Regards,
Ravi

Retrieving playing time

The question is how can I retrieve the playing time of a video or audio sample. I do not referring the media time I'm referring the time the sample is being playing. I guess I have to get down to video/audio renderer level but I a litle lost at this area.
I need this information to write down in a log file in order to make some remote synchronization performance analisys. Thank you all.

have you try'd "processor.getMediaTime()" or "player.getMediaTime()" ?

I accidently deleted photos. Where can I retrieve from Time Machine?

I was trying to delete some graphic images that had somehow gotten downloaded into iPhoto, and ended up deleting the entire library. They aren't in the iPhoto trash. Where can I go in the Time Machine to retrieve the photos? I don't know where they are stored? Any ideas? Thank you for help!

This should work:
Open iPhoto
Click File
At the bottom of the file menu click on "browse backups"
This opens up time machine, so you can look for your photos there.
Hope this helps.

Time dependent employee hierarchy

HELLO GUYS
I Need HELP ON CREATING 0EMPLOYEE time dependent Hierarchy in bw using r/3 data. i am trying to bring r/3 hr organization chart which has employee hierarchy into bw. i am wondering if anyone did this using functional module or extractor
please LET ME KNOW the process .i am not able to get this using ABAP and i need help on this.

Following document might be helpful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20a709c1-0a8e-2a10-21b4-f779728c63bf?quicklink=index&overridelayout=true

How OTL (TimeKeeper Entered Time) AND (Employee Entered Time by his self)

Hi All
I have a question related to OTL Time entered using TimeKeeper (Using TimeKeeper Supervisor) and Time entered by Employees hisself.
For Example ONE Employee time is entered by Time Keeper and the employee is entered time for hisself too.
Entered BY TimeKeeper
Alternate Name = Leave WO Pay-TimeKeeper
Transaction Date = 01-SEP-2008
Pay Element =Sick Leave
Alternate Name Definition = Time Keeper Def
Hours = 2
Entered BY Employee
Alternate Name = Leave WO Pay-Employee
Transaction Date = 01-SEP-2008
Pay Element =Sick Leave
Alternate Name Definition = Employee Def
Hours = 3
How can I find out in Oracle database in tables that time is entered by TimeKeeper or Employees.
Thanks
Discoverer

You didnt get me :)
Let me explain in detail
The two columns that we need to consider are RESOURCE_ID and LAST_UPDATED_BY in HXC_TIME_BUILDING_BLOCKS
1.) Case when supervisor enter time for other employee, the data will be as follows
RESOURCE_ID -> Person id of the employee
LAST_UPDATED_BY -> User id of the supervisor
2.) Case when supervisor enter time for him self, the data will be as follows
RESOURCE_ID -> Person id of the supervisor
LAST_UPDATED_BY -> User id of the supervisor
So you need to compare resource_id and person id for last_update_by to look whether the time is enteretd by supervisor/him self.

Retrieve System Time Zone Offset?

Hi, I'm doing some GPS emulation and need to retrieve the system Time Zone Offset in (Hour and Minute). For example if Mountain time zone offset hour = -7 and Minute = 00. Is this information possible to get in Labview?
Thanks.

Hello QRP,
Yes, it can be done, but this way is not very elegant. It will get the GMT offset that your PC has as its current setting.
Use Format Date/TIme String with a format string of "%z". The output is the offset as a STRING formatted HH:MMS
Break the string apart with Scan From String to get the individual elements, or by using "%t" as the format, get the offset in seconds.
Rod.
EDIT: There shouldn't be a smiley in the time format above, It's "HH : MM : SS" but ignore the spaces!

Retrieve name of an employee by employeeno

Hello abapers...
i'm quite new to abap development an actually use it to create bapis for portal use. I would like to retrieve the name of an employee out of the HR. As input-parameter i have the employee-number. What tables do i have to query to get the needed information?
Greets,
Jochen

Hello Jochen
I would recommend to use the methods IF_PT_EMPLOYEE:
DATA: go_employee TYPE REF TO if_pt_employee,
gd_fullname TYPE emnam.
go_employee = cl_pt_employee( i_pernr = <your pernr> ).
gd_fullname = go_employee->get_ename( ).
Regards
Uwe

Retrieve worhk time of employee

Similar Messages

Maybe you are looking for