Retrieving a Project from Local Files ( .dtr folder )

Hi Experts,
I was working on a Development Component ( DC) and created an Activity which had all of the project.
For some reason I never checked it in the DTR. And everything was local to my NWDS
Now my computer crashed but fortunately I have the backup of all the files on my computer.
How can I retrieve my project from .DTR folder
Would appreciate your response on this. Thanks alot!!
Akshay!

Hi Akshay,
Now my computer crashed but fortunately I have the backup of all the files on my computer.--->>hope you have the project files with the latest code change done by you.
For some reason I never checked it in the DTR. And everything was local to my NWDS & How can I retrieve my project from .DTR folder--->>take the backup of the projects in your local machine. After this try to sync/create the project from the DTR, once done check in the transport view's activity tab for activity created by you.
IF activity is presented then good you can check the code and confirm the file having your changes or not.
If you are not able to locate the old activity then create new for the project and with the help of backup project files you can replace the code and do the changes.
Hope this may help you.
Deepak!!!

Similar Messages

VS2012: Retrieve my Project from application files?

Hi Guys,
I have lost my project files - I cant locate them anywhere.
What I do have is the published files with the application files : .application , . manifest and .deploy.
Is there any way to retrieve my project from here?
Any suggestions are most welcome!
Davie.
Davie.

Hi Fenster,
Test Tools in Visual Studio 2010 and 2012
forum is to discuss Visual Studio test issues. Your issue is out of support range of this forum.
In my opinion, you can't get your whole project from those application files. I don't know about 'retrieve the project'. I suggest consulting your issue on the development
forum based on your type of your application.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get folder(directory path only not file path) from local file system

Hi Firends,
How to get folder(directory path only not file path) from local file system , whenevr i will click on browse button.
Please give reply for this one , if anybody knows.
Thanks,
Anderson.

Hi Anderson,
if you're using flash.filesystem.FileReference - then it is run in black box - except of filename, size and creation data (and few other properties available after some operation succeeded). This is part of security features in Flash runtime (described in header section):
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/FileReference .html
This for example implies that user can download a content to local machine - but that content cannot be loaded back into Flash runtime. For this you would need either Air runtime flash.filesystem.File:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filesystem/File.h tml
(so you would created Air runtime based application: desktop or mobile but not web, even as standalone project) or you would need one of 3rd party tools that add file access/file information features to standard Flash runtime applications converted to standalone native applications.
hth,
kind regards,
Peter

Import data from local file: insufficient privilege

As part of a project I'm working on, I have to load data (only a few thousand records) into a HANA Development instance on HCP. Last week I did this several times with no problem using File > Import from HANA Studio and choosing Data From Local File. Yesterday and today I get this message (most of the time, but not all the time): SAP DBTech JDBC: [258]: insufficient privilege: Not authorized.
Does anybody know why this might be and what do to about it?
Are there batch alternatives? I have not found any. The INPUT INTO statement also gives authorization problems.

Thanks for Your replies.
Jochen - I can't find schema.ini file and your link doesn't work - I mean that site is under construction
Mahesh - I tried to changed cells' format in excel, but file is saved without changes (as csv).
Pandey - I read about DTW but I can't find it anywhere. Is there a site where it could be downloaded from?
Finally I solved this problem. After saving file as xls I could changed cells' format and save with changes. It helped - data '1-10-103' is imported correctly.
Regards,
Hmg

How do I Retrieve imovie projects from and external drive back into my mac internal drive

How do I Retrieve imovie projects from and external drive back into my mac internal drive?
Thank You

Every working drive, Internal or External, should produce an Icon on your Desktop. If you cannot see those, click on the Desktop (to get Finder) and choose Preferences off the Finder Menu. The general pane has checkboxes for "Show these items on the Desktop:"
Double click the Icon for your External Drive to open it. Open the folders on it until you find the Items you want to copy. Drag them to the Icon of your Internal Drive, or open the folder where you want them to land and drop them in there.
A drive that does not appear on the desktop after you have asked it to may be damaged. But it would be smart to do a Restart to see if it is recognized again at next Startup.

While uploading data from local file

Hi,
While uploading data from local file having the header text into interal table using the GUI_UPLOAD function module,there is problem in upload because of header text in file, do we have any option in this FM itself to skip this header text and upload from sdecond line because as per our requirement we can't delete this header text from the file.

Hi Manish,
Do you have the problem while uploading? Is it giving any error?
If not, if your uploading is successful into the internal table, then delete the first row, which is header, from the internal table using index eq 1.
Regards,
Chandra Sekhar

How do I retrieve lost projects from the trash?

Hi, I made a huge mistake this morning, and moved the wrong project to the trash. How do I retrieve it? I did not empty the trash, i tried dragging it into fcp x, i drug it to the desktop then tried importing it and nothing is working. I also right clicked and selected "open with FCP" and it said you can only open files within final cut pro. I really need help
The file type is ".fcpproject"

No, not the project file. When you delete a project from the project library and whole folder of material goes into the trash. The whole folder should be returned to its correct location in the Final Cut Projects folder when the application is closed.

Importing previously exported data (from local file)

After having searched to no end I still cannot find the answer to my question....
Our current environment is an SAP and FLM system (forms livecycle management) using livecycle designer for design and all users on at least reader 9.
I would like to know if it is possible for a user to fill in a form and save the entered data (to a local file) so the following week they can then open latest version of the PDF (requested from the FLM portal to be either completed online (portal) or offline (email)) they would then import the data, make any minor updates and submit. The forms should have reader extensions applied but as yet unsure of the exact settings (if any) as this happens automatically within FLM. The form shouldn’t change in future, more than some additional validation, but allow form numbers and versions within FLM to be better maintained. Plus to ensure users do not keep or use outdated forms.
From my understanding there are 2 ways to import data, either folder level javascript or via certifying the form. For our setup folder level scripts are a non-starter as would have no way to maintain these on every PC (far to many) so that leave us with certifying forms....from the limited information I have found on this it appears that the certification may break when importing data, have very very basically tested this and appears to be true.
So the last thought was if I can import data programmatically via javascript and fill fields in etc would this still have the same affect of breaking certification?
Appreciate any advice

> Hi Srdjan.
>
> Are you familiar with the MDM Import Manager?
>
> Best regards,
> Nir
Hi
I haven't tried the MDM Import manager..but I solved it with LSMW. I created a recording for one record entry, then I specified the rest of the data in a text file, and passed it to LSMW..It worked (almost) perfectly!
Thanks for the suggestion though, I'll give it a try some other time
Best regards,
S.

RTP streaming from local file

I've a problem with JMF, in particular when I transmit a stream from a local file updated from receveing process. The file is "uLaw 8Khz, 8Bit".
It would seem that when the processor is running is made of a photo of current file size; this implies that is sent only part of the file accessed. The rest of the file is discarded and JMF raises the event EndOfStream.
Here's the source:
               // encoding = ULAW, sampleRate = 8000.0Hz, sampleSizeInBits = 8bit, channels = mono(1) or stereo(2)
               this.format = new AudioFormat(this.audioFormat, 8000, 8, 1);
               MediaLocator mlIn = null;
               if (rtpFilename != null && rtpFilename.startsWith("file://"))
                    mlIn = new MediaLocator(rtpFilename);
               else
                    mlIn = new MediaLocator("file://" + rtpFilename);
               logger.debug("Input Media locator URL: " + mlIn);
               if ((processor = createProcessor(mlIn)) != null) {
                    // configure the processor
                    stateHelper = new StateHelper(processor);
                    if (stateHelper.configure(10000)) {
                         processor.setContentDescriptor(new ContentDescriptor(ContentDescriptor.RAW_RTP));
                         // Go through the tracks and try to program one of them to output gsm data
                         boolean encodingOk = false;
                         TrackControl track[] = processor.getTrackControls();
                         if (track != null) {
                              logger.debug("Track found: " + track.length);
                              for (int i = 0; i < track.length; i++) {
                                   if (!encodingOk && track[i] instanceof FormatControl) {
                                        if (((FormatControl) track).setFormat(format) == null) {
                                             track[i].setEnabled(false);
                                        } else {
                                             encodingOk = true;
                                   } else {
                                        // we could not set this track to gsm, so disable it
                                        track[i].setEnabled(false);
                         // At this point, we have determined where we can send out format data or not
                         logger.debug("Encoding " + this.format.getEncoding() + " result: " + encodingOk);
                         if (encodingOk) {
                              // realize the processor
                              if (stateHelper.realize(10000)) {
                                   try {
                                        // hand this datasource to manager for creating an RTP
                                        // datasink our RTP datasink will multicast the audio
                                        String locator = "rtp://" + this.ip + ":" + this.port + "/audio/1";
                                        MediaLocator mlOut = new MediaLocator(locator);
                                        logger.error("Output Media locator URL: " + mlOut);
                                        // create a send stream for the output data source of a processor and start it
                                        dsource = processor.getDataOutput();
                                        dsink = Manager.createDataSink(dsource, mlOut);
                                        dsink.open();
                                        // now start the datasink
                                        dsink.start();
                                        logger.debug("Data sink created for Media locator: " + mlOut);
                                        if (stateHelper.prefetch(10000)) {
                                             stateHelper.playToEndOfMedia(60000);
                                        } else {
                                             logger.warn("Processor prefetch failed");
                                   } catch (Exception e) {
                                        logger.error(e.getMessage(), e);
                                        running = false;
                                   } finally {
                                        if (stateHelper != null)
                                             stateHelper.close();
                                        if (dsink != null) {
                                             dsink.close();
                                             logger.debug("Datasink closed");
                                        try {
                                             if (dsource != null)
                                                  dsource.stop();
                                        } catch (IOException e) {
                                             logger.debug(e.getMessage(), e);
                              } else {
                                   logger.warn("Processor realization failed");
                         } else {
                              logger.warn("Encoding failed");
                    } else {
                         logger.warn("Processor configuration failed");
               } else {
                    logger.warn("Processor creation failed");
Thanks in advance mariusv5.

Hi,
I think you should go for BDC , using call transaction 'SE11' you can upload data from flat file. and Use FM gui_download to download the data from z table
thanks,
Prashant

How to open 8.0 project from generated files

Hello-
Is there a way to work from generated files in a project after it is published?? We lost the 'originals' which were on a hard drive that got zapped. Now I am scrambling to figure out how to open it when I can't see the xpj file???
I know this has come up before - but I am having a mental block. Will keep searching on the posts.
Thanks for any help!!

Hi there
Does the fact you say "generated files" mean you are left with only WebHelp or FlashHelp output? If so, the link below should help.
Click here to view
If you say you have a CHM file, try the link below this.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

IOS: (not) playing sound from local file system - Error #2032

Dear all,
I am working on an app where I want to (among others) play sound files from the local file system.
I have added a few mp3 files into my .ipa file.
With a small file browser in my app I can select any one of them which returns me a File object.
I then use this File object to do a URLRequest to load the sound:
var req:URLRequest = new URLRequest(file.nativePath);
sound = new Sound();
sound.addEventListener(IOErrorEvent.IO_ERROR, soundLoadError);
sound.addEventListener(Event.COMPLETE, soundLoaded);
sound.load(req);
It works in flash, but fails on the iPAD. Everytime I try to load, I get a IOErrorEvent with error code Error #2032
When I replace new URLRequest(file.nativePath) with URLRequest("http://.../testfile.mp3"), everything works fine!
Any help appreciated.
Is this a matter of Security settings? Can I change those?
Something to do with Sandboxing (whatever that is)?
or something to do with cross-domain access?
I have been looking around for days now and any help would be appreciated!
I am using Flash CS5.5 & AIR 2.7
Thanks, Marcus.

Hi Sanika,
this was something closer to that paragraph for "nativePath":
Some Flex APIs, such as the source property of the SWFLoader class, use a URL (the url property of a File object), not a native path (the nativePath property).
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filesystem/File.h tml#nativePath
but that is not exactly what I've read (maybe that was A-blog or post on someone from A-team on his personal blog or post on stackoverflow).
(myself I'm using and providing solutions for paths using FILE protocol - file URI schemes - mostly whenever I can and where it is supported)
regards,
Peter

Get image from local file system for printing

If a user clicks Print, I would like to be able to print the
stationery header if the user wants to print on plain paper. Can I
pick up the image from the users local file system and add it
directly to the print send object? Prior to this the user would
simply upload the location of the image to the remote server where
the swf resides, or do I have to ask him to upload the image itself
and then download it again every time he uses the program?
Doug

Here is a snippet from the Flex 2 user guide about urlloader:
When using this method, consider the Adobe® Flash®
Player security model:
For Flash Player 8 and later:
Data loading is not allowed if the calling SWF file is in the
local-with-file-system sandbox and the target resource is from a
network sandbox.
Data loading is also not allowed if the calling SWF file is
from a network sandbox and the target resource is local.
As far as I know there is no way for a user to "trust" an swf
file. This is not like an activeX control.

Can an applet loading from a browser read from local file system?

I have to load my applet from a browser, and the "browse" button on it should be able to select and read certain files in the local file system( or the files located under the server's home directory). Is there a way to address the security issue? I know there are ways to enable an appletviewer to do it, but how about a browser?

You'll need to have a signed applet.

How a client could retrieve interested data from log file in dbxml?

I have heard about db_printlog utility in BDB. Is there any similar utility (like shell command or API) in bdbxml?. I want to extract updated nodes from log file.

I got Berkeley DB 4.8.6 and find db_printlog. It works on bdbxml log file . I used it to translate a log file.
I used it with following syntax:
In WinXp Command Prompt:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
D:\Program Files\Oracle\tmp>db_printlog >mylog.txt
D:\Program Files\Oracle\tmp>then mylog.txt created. here is some part of it:
[1][218264]__dbreg_register: rec: 2 txnp 80000017 prevlsn [1][210024]
     opcode: 3
     name: a.dbxml0
     uid: 0xc1 y0 0 0 0 40 0x91 0xed 0xde 0x1d 0 0 0 0 0 0 0 0
     fileid: 37
     ftype: 0x1
     meta_pgno: 22
     id: 0x0
[1][218348]__txn_child: rec: 12 txnp 80000015 prevlsn [1][184288]
     child: 0x80000017
     c_lsn: [1][218264]
[1][218388]__db_addrem: rec: 41 txnp 80000015 prevlsn [1][218348]
     opcode: 1
     fileid: 35
     pgno: 21
     indx: 0
     nbytes: 8
     hdr:
     dbt: J3
     pagelsn: [1][193024]
and so onBut i couldn't find what i was looking for, i mean the Nodes path.

Retrieve variable value from local Storage and display on canvas

Hi
I'm working on a project that has multiple html files (the projects are split into 12 so 12 different edge projects and im linking them via window.open()). I have a variable that keeps track of correct answers stored in LocalStorage html object. I have managed to get the localStorage variable to increment up by one each time the object is correct however my last step is to get the variable and them display the result on the canvas. I have tried
var outPut localStorage.getItem(' ') method to retrieve the variable then used the set and get method to display the result however it doesn't work. Im not sure if I need a for loop to go though the localStorage and get the elements
Code:
// insert code to be run when the composition is fully loaded here
yepnope({nope:['jquery-ui-1.10.0.custom.min.js','jquery.ui.touch-punch.min.js'],complete: init}); // load the jquery files
sym.setVariable("myScore", 0);
var c = localStorage["myCount"] || 0; //loading from localStorage
function init(){
sym.getSymbol("barLimit").$('scrubber').draggable({start: function(e){
},drag: function(e,ui){ // start: ... // Find original position of dragged image
var leftLimitScrubber = sym.getSymbol('barLimit').$('scrubber').position().left; // position of the scrubber
var rightLimitScrubber = sym.getSymbol('barLimit').$('leftLimit').position().left;
var LimitTwoLeft = sym.getSymbol('barLimit').$('rightLimit').position().left;
if(leftLimitScrubber == rightLimitScrubber){
sym.getSymbol('correctBar1').play('in'); //
sym.getSymbol('nextButton').play('in');
sym.getSymbol('incorrectBar1').play('out'); //
sym.getSymbol('thumbsDown1').play('out'); //
sym.getSymbol('thumbsUp1').play('in'); //
sym.getSymbol('congrats').play('in'); //
localStorage["myCount"] = parseInt(c)+1; //Converting string to number, and then saving it
console.log("numberOfCorrectAnswers", localStorage["myCount"]);
var finalScore = sym.getVariable("myScore");
finalScore = c;
sym.setVariable("myScore", finalScore);
sym.$("Score").html(finalScore);
} else if(leftLimitScrubber == LimitTwoLeft){
sym.getSymbol('incorrectBar1').play('in');
sym.getSymbol('correctBar1').play('out');
sym.getSymbol('thumbsUp1').play('out');
sym.getSymbol('thumbsDown1').play('in');
axis: "x",
containment: "parent"
       //for (var i = 0; i < localStorage.length; i++){ // iterate throught the local storage
         //var getItem = localStorage.getItem(localStorage.key(i));
          //if(getItem == 'numberOfCorrectAnswers' ){
The above is the code for the 12th project in this projects it needs to display the variable inside the object localStorage and display on the canvas.
Any help will mean a lot. Thank You in advance
P.S edge animate has a lot of bugs hard to code in

what you need to do is to create a text box and set a default value of zero. Once that is don't you need a code on the stage which grabs the value form the localStorage object. I used the .text() jquery method to display the value on the canvas. So the zero will be replaced with whatever the value of the localStorage is.
You also need a if statement to check if the localStorage is undefined, if its not then grab the value and display on the canvas.
e.g
var number = localStorage['finalValue']; // for the sake of completeness I had to put this line of code
if( number ! = undefined){ // if not undefined so the object exits then ...
     sym.$(' (text identifier) '). text(number); // note text identifier is the name of the text box you create in edge
} // Done

Retrieving a Project from Local Files ( .dtr folder )

Similar Messages

Maybe you are looking for