Retrieving data from a broken iBook.

I dropped my iBook a few days ago. I thought my data was synched to my iDisk but it is not.
The old machine (details still showing below) still lights up erratically but quits during the startup process. Keys don't work properly but I get glimpses of the screen with my data still on the hard drive. I can't seen the screen to use Migration to extract the data to my new computer and am wondering what other options there are.
One thing I had tried was to reintstall the system software and loaded Disc 1 but the machine now quits after asking me to load Disc 2. But my data is in the Previous System folder I created.
I understood that synching created a copy of your hard drive on iDisk but it doesn't. What does it do?

Connect the computers with a FireWire cable if possible and start up the iBook with the T key held down. It's also possible to remove the iBook's hard drive, place it in an enclosure, and copy your files off.
(49707)

Similar Messages

Retrieve data from old broken harddrive

Hi, I want to ask.
Last friday, my harddrive has broken for unknown reason. I knew it has broken from information I got in PC Hardware Diagnostics UEFI. The harddrive failed on Extensive Test and Long DST test (Error code : Q8FETV-77C7GA-MPFX0J-61DJ03). I plan to buy a new harddrive.
My question is, can I retrieve my data from the broken harddrive ? I didn't have backups for the data. If it is still possible, what are the steps ? Can I do it by myself or should I get some help from computer service shop to help me ?
Thank you.

Hi,
Double post, pleae use:
http://h30434.www3.hp.com/t5/Notebook-Hardware/Retrieve-data-from-broken-harddrive/m-p/4827112
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I retrieve data from my broken macbook hard drive?

My macbook suddenly crashed and I had to do a forced shutdown. When I tried to turn it back in, a folder with a question mark kept flashing and by computer did not start. I looked up what might have been the cause of this, and I found out it was my hard drive or the cable that connects the drive to the mac. But I brought it to my school since they have tech support and they said that my hard drive is pretty much dead, but it can still be possible to retrieve the data from. I really need help because I need to hand in my Extended essay in about one week and I already had done quite a lot for my essay. Please tell me how to get all my data back, or past it to a new hard drive.

No no, I backed up my computer about 1 month ago but I never thought anything will happen. My mac never crashed before and I just was not expecting anything bad to happen to it, but I agree it was stupid of me to not back it up in daily bases. But thanks a lot for letting me know that I can retrieve my data.

Retrieve data from broken harddrive

Hi, I want to ask.
Last friday, my harddrive has broken for unknown reason. I knew it has broken from information I got in PC Hardware Diagnostics UEFI. The harddrive failed on Extensive Test and Long DST test (Error code : Q8FETV-77C7GA-MPFX0J-61DJ03). I plan to buy a new harddrive.
My question is, can I retrieve my data from the broken harddrive ? I didn't have backups for the data. If it is still possible, what are the steps ? Can I do it by myself or should I get some help from computer service shop to help me ?
Thank you.

Hi,
Hope the following methods help:
http://www.wikihow.com/Recover-a-Dead-Hard-Disk
Good cluck
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can i recover the data from a broken XD card?

Can i recover the data from a broken XD card? any software Power Data Recovery. but it failed

Accidentally deleted data from XD card, don't panic. I suggest an advance and professional XD card recovery software, you can use third-party software Kernel for Digital Media Recovery Tool. It can quickly restore all lost data from XD card. This software
also supports all kinds of multimedia files such as SD Card (Secure Digital), Multi Media Card (MMC), Compact Flash (CF), XD Card, Micro SD card, , Memory Stick. To more details kindly read this post : http://digitalmediarecovery.blogspot.com/2013/12/retrieve-lost-data-from-memory-card.html

Error while trying to retrieve data from BW BEx query

The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

Query Report:To Retrieve Data from A/R Invoice and A/P Invoice

Hii Experts,
I am a new Sap B1 Trainee.I am facing a problem when retrieving data from A/R Invoice and A/P Invoice in order to track
Expenditure and Revenue according to a Bussiness partner,
I am using union to retrieve the information,but it is saying a error that Error Converting Varchar to Numeric and also
i would like to know how can i show the total final payment by reflecting Downpayments in A/R Invoice and A/P Invoice
With Regards
Cherry.

Hii.
My Sap B1 version is 8.8.1 and patch level is 20. Actully i need a scenario where i can able to show both Expenditure and Revenue of a particular bussiness partner and profit/loss in a single query report.
I need some tips regarding this,When i am doing union i am getting conversion error converting varchar to numeric when i take
Sum(Line Total) from OINV and Sum(line total) OPCH group by docdate and docentry and BP .
and another scenario is how to deduct A/P downpayment or A/R downpayment from A/P invoices and A/R invoice to get the final Revenue and Expenditure ..
Thanks & Regards
Cherry

Retrieve data from a list in SharePoint 2013 provider hosted App using CSOM

I have developed a provider hosted app in SharePoint 2013. As you already know, Visual Studio creates web application and SharePoint app. The web application gets hosted inside IIS and the SharePoint App in SharePoint site collection. I'm trying to get
data from a list hosted in SharePoint using CSOM. But I get ran insecure content error.
here is my code in Default.aspx
<script type="text/javascript" src="../Scripts/jquery-1.8.2.js"></script>
<script type="text/javascript" src="../Scripts/MicrosoftAjax.js"></script>
<script type="text/javascript" src="../Scripts/SP.Core.js"></script>
<script type="text/javascript" src="../Scripts/INIT.JS"></script>
<script type="text/javascript" src="../Scripts/SP.Runtime.js"></script>
<script type="text/javascript" src="../Scripts/SP.js"></script>
<script type="text/javascript" src="../Scripts/SP.RequestExecutor.js"></script>
<script type="text/javascript" src="../Scripts/App.js"></script>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div>
<input id="Button1" type="button" value="Get title via CSOM" onclick="execCSOMTitleRequest()" /> <br />
<input id="Button2" type="button" value="Get Lists via CSOM" onclick="execCSOMListRequest()" />
</div>
<p ID="lblResultTitle"></p><br />
<p ID="lblResultLists"></p>
</form>
</body>
</html>
and App.js is:
var hostwebUrl;
var appwebUrl;
// Load the required SharePoint libraries
$(document).ready(function () {
//Get the URI decoded URLs.
hostwebUrl =
decodeURIComponent(
getQueryStringParameter("SPHostUrl")
appwebUrl =
decodeURIComponent(
getQueryStringParameter("SPAppWebUrl")
// resources are in URLs in the form:
// web_url/_layouts/15/resource
var scriptbase = hostwebUrl + "/_layouts/15/";
// Load the js files and continue to the successHandler
//$.getScript(scriptbase + "/MicrosoftAjax.js",
// function () {
// $.getScript(scriptbase + "SP.Core.js",
// function () {
// $.getScript(scriptbase + "INIT.JS",
// function () {
// $.getScript(scriptbase + "SP.Runtime.js",
// function () {
// $.getScript(scriptbase + "SP.js",
// function () { $.getScript(scriptbase + "SP.RequestExecutor.js", execCrossDomainRequest); }
function execCrossDomainRequest() {
alert("scripts loaded");
function getQueryStringParameter(paramToRetrieve) {
var params = document.URL.split("?")[1].split("&");
var strParams = "";
for (var i = 0; i < params.length; i = i + 1) {
var singleParam = params[i].split("=");
if (singleParam[0] == paramToRetrieve)
return singleParam[1];
function execCSOMTitleRequest() {
var context;
var factory;
var appContextSite;
var collList;
//Get the client context of the AppWebUrl
context = new SP.ClientContext(appwebUrl);
//Get the ProxyWebRequestExecutorFactory
factory = new SP.ProxyWebRequestExecutorFactory(appwebUrl);
//Assign the factory to the client context.
context.set_webRequestExecutorFactory(factory);
//Get the app context of the Host Web using the client context of the Application.
appContextSite = new SP.AppContextSite(context, hostwebUrl);
//Get the Web
this.web = context.get_web();
//Load Web.
context.load(this.web);
context.executeQueryAsync(
Function.createDelegate(this, successTitleHandlerCSOM),
Function.createDelegate(this, errorTitleHandlerCSOM)
//success Title
function successTitleHandlerCSOM(data) {
$('#lblResultTitle').html("<b>Via CSOM the title is:</b> " + this.web.get_title());
//Error Title
function errorTitleHandlerCSOM(data, errorCode, errorMessage) {
$('#lblResultLists').html("Could not complete CSOM call: " + errorMessage);
function execCSOMListRequest() {
var context;
var factory;
var appContextSite;
var collList;
//Get the client context of the AppWebUrl
context = new SP.ClientContext(appwebUrl);
//Get the ProxyWebRequestExecutorFactory
factory = new SP.ProxyWebRequestExecutorFactory(appwebUrl);
//Assign the factory to the client context.
context.set_webRequestExecutorFactory(factory);
//Get the app context of the Host Web using the client context of the Application.
appContextSite = new SP.AppContextSite(context, hostwebUrl);
//Get the Web
this.web = context.get_web();
// Get the Web lists.
collList = this.web.get_lists();
//Load Lists.
context.load(collList);
context.executeQueryAsync(
Function.createDelegate(this, successListHandlerCSOM),
Function.createDelegate(this, errorListHandlerCSOM)
//Success Lists
function successListHandlerCSOM() {
var listEnumerator = collList.getEnumerator();
$('#lblResultLists').html("<b>Via CSOM the lists are:</b><br/>");
while (listEnumerator.moveNext()) {
var oList = listEnumerator.get_current();
$('#lblResultLists').append(oList.get_title() + " (" + oList.get_itemCount() + ")<br/>");
//Error Lists
function errorListHandlerCSOM(data, errorCode, errorMessage) {
$('#lblResultLists').html("Could not complete CSOM Call: " + errorMessage);
Any solution is appreciated.

Hi,
To retrieve data from list in your provider-hosted app using SharePoint Client Object Model(CSOM), you can follow the links below for a quick start:
http://msdn.microsoft.com/en-us/library/office/fp142381(v=office.15).aspx
http://blogs.msdn.com/b/steve_fox/archive/2013/02/22/building-your-first-provider-hosted-app-for-sharepoint-part-2.aspx
Best regards
Patrick Liang
TechNet Community Support

Retrieve data from a synonym in oracle database through db connect

Hi Everyone,
I have created certain synonym for some tables in oracle. I want to retrieve data from it through db connect but where through source system and then selecting database tables, only tables and views are available.
Synonyms are not available to create data sources and retrieve the data from it. Why is it so. Is this a limitation of db connect.
Can anyone please let me know about it.
Thanks,
Joshua.

Hi,
You want to import data from an external Oracle database into your BW 3.X. To do this, you can connect the external database to the BW 3.X release as a source system using the external database connect. BW 3.X here represents BW 3.0, BW 3.1 and BW 3.5 because in other (DB relevant) parts, all 3 versions are based on the same source code.
General information
The above function allows you to load data from an external Oracle database (not a BW database) into your BW 3.0 system.
There may also be constellations which cannot be used directly through the DB Connect access. However, it should be possible to find an adequate, customer-specific solution for most of these scenarios.
In such situations, the resulting work falls into the area of Consulting and cannot be handled via Support.
Successful implementation of a connection requires corresponding expertise and experience in the use of the source database in the areas:
                - Tools
                - SQL syntax
                - DB-specific functions
Corresponding knowledge of the source application is also required to ensure that semantically relevant data arrives in the BW system.
Procedure
You should execute the following steps to connect the source system (Q) to the BW system (BW):
Installing the client software on an BW application server
                     Of course, you only need to install the client software if you are using BW with a non-Oracle database.
                     Use the Oracle setup program on the database CD (runInstaller on Unix) to start the OracleInstaller. Follow the program instructions and the DB installation instructions to install the Oracle Client software on BW.
Testing connection setup from BW to Q
                     After you install the client software on BW, try to set up a connection from BW to the server on Q. You may need to adjust the tnsnames.ora or sqlnet.ora files for this, to introduce the Oracle systems (to which contact should be made) to BW. You can test the connection by executing the command "tnsping QDB" on BW to check whether the client has established contact to the QDB database on the Q system.
Creating a separate U user in Q
                     We recommend that you create a separate U user in Q for connection to BW. This means that authorization and administration questions can be solved centrally.
Displaying data sources in Q for the U user
                     To provide U data for users other than U, you can create views on other user tables as user U:
                     CREATE OR REPLACE VIEW viewname AS
                       SELECT * FROM QDB.tablename
                     You may have to grant SELECT privileges to user U in the QDB schema:
                        GRANT select ON QDB.tablename TO U
                     Of course, you can also restrict or reformat data in the view arrangement (for example, change from internal date format into the SAP date format). JOIN operations using several tables are also available.
                     !!! Synonyms do not yet work!!!
                     Synonyms that you can create as described below are another option for providing a complete table for the user U:
                       CREATE SYNONYM synoname FOR QDB.tablename
                     !!! Synonyms do not (yet) work!!!
                     After you have displayed the require data for user U, you can simply use
                       SELECT * FROM <view or table>
                     on the Q system to check which data is returned.
                     You can now open a link to Q as user U in the BW system with SQLPLUS and check, using the same SELECT, whether this data is also seen in the Oracle client. If this is not the case, there is probably a connection problem.
Creating a connection from BW to Q in BW
Including data sources of user U user in Q in BW.
Solution
Supported BW, Basis and BW 3.0B database versions, Basis 6.20 Support Package 2 (or higher)
      Oracle 8.1 (or higher, see below)
Possible problems
- Synonyms do not (yet) work!
Up to now, only tables and views have been used as data sources for the DB Connect from the R3 Basis. As soon as synonyms are also used in the Basis, you will be able to convert created views (or even replicated tables) to synonyms as a workaround.
With Basis 6.40 at the earliest, therefore as of BW 3.5, you will also be able to use synonyms. Until then, the following will help:
CREATE VIEW <view_on_synonym> AS SELECT * FROM <synonym>
- The source DB must have at least the release version of the BW DB.
Oracle only ensures the support of client-server links if the version of the client is not higher than that of the server. So if BW has Oracle version 8.1 and, as in the case of Dbconnect, is run as a client against the server of the source database, the source database must have at least release Oracle 8.1 or higher.
Of course, you have the option to install the Oracle client software of a lower version and then use this for the DB connect. This is also the procedure used to work with a DB connect on external databases of other vendors.
Furthermore, the implementation of the DBconnect function in BW uses SAP Basis functions. Specifications of Oracle 8.1 database catalogs are used here. The source database must therefore have at least Version 8.1.
- Oracle Client Software Version
If you want to connect from an Oracle BW DB to an Oracle source DB, for the DB connect you naturally use the client software that you already installed on each application server.
If you want to connect from a non-Oracle BW DB to an Oracle source DB, check item 3 of note 521230 to see which Oracle client software version is released with your BW R3 kernel and use this version.
- Date and time fields in Oracle and their conversion into SAP-compatible column formats
Example with a DATE field:
Since a SAP table does not have a DATE field (date values are NUMC(8) and time specifications are NUMC(6)), we will use the Oracle DBA_TABLES system table as an example.
    SQL> desc dba_tables;
The Oracle DBA_TABLES system table has a LAST_ANALYZED field. This is a DATE type field and is recognized as a date field of 7 characters by DBA_CONNECT. However, the import does not work because the DATE is a 7-byte conglomerate of "...century, year, month, date, hour, minute and second." (extract from the Oracle documentation).
To make this DATE field legible for DB connect, you must use the TO_CHAR function in a VIEW. This should display the following examples:
SQL> select LAST_ANALYZED from dba_tables
      where table_name like 'RS%' and rownum < 10 ;
The formatting used here is the default used implicitly by SQLPLUS.
SQL> select to_char(LAST_ANALYZED,'YYYYMMDD') as dat from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format YYYYMMDD and should be loaded correctly by the DB connect as a date.
SQL> select to_char(LAST_ANALYZED,'HH24MISS') as tim from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format HHMMSS and should be loaded correctly by the DB connect as a time.
You can use the following example for more detailed experiments:
SQL> select to_char(
       TO_DATE('03-FEB-2001 04:05:06','DD-MON-YYYY HH24:MI:SS'),
       'YY-MM-DD HH24-MI-SS') as datim from dual;
with the result:
DATIM
01-02-03 04-05-06
When you create a VIEW and use the TO_CHAR function (or other functions), you should easily be able to avoid problems with the interpretation of date/time specifications (and other reformatting).
Details about the functions and the formats are contained in the Oracle documentation.
- Special characters
A words that contain special characters can only be imported correctly if the code pages in BW and in the source system are identical. If the code pages are not the same, DB Connect can be used if the characters to be imported appear under the first 127 characters of the character set.
The use of multibyte code pages in the source system for saving data using character sets with more than 256 characters (Kanji, Katakana, Hiragana, Korean, Chinese, Tagalog, Khmer, Arabic, Cherokee, and so on) can cause the characters to become corrupt.
For questions concerning the code pages, also refer to the FAQ note 606359 and question/answer 19 that appears there.

Retrieve data from a dynamic page via loadURL

Hello.
I would like to ask you how it is possible to retrieve data
from a dynamic page (asp classic in my case) using the loadURL
method.
I would like to create an html authentication form (with
username and password fields). The loadURL method should call an
asp page and then pass to the usual function 'DoIfSucceded' the
results of the elaboration.
Of course I'm going to have a switch in the function in order
to make different actions depending from the results of the asp
page (authentication succeded or failed).
I had a look to the examples at this page:
Adobe
samples
Is there anyone who can explain clearly how the results data
must be written by the asp page and how the success function can
retrieve them ?
I thank you in advance for your help.

loadURL() uses the the XMLHttpRequest Object so if the
content you return is XML, you have 2 choices for accessing your
data. You can either access it as a text string via the
XMLHttpRequest object's responseText property, or as a DOM document
via the XMLHttpRequest object's responseXML property:
function MySuccessCallback(req)
// If my data is XML, I can access the data that was sent
from the server
// as DOM elements via the XMLHttpRequest's responseXML
property.
var xmlDOM = req.xhRequest.responseXML;
// OR, you can access the data sent back from the server as
text via
// the XMLHttpRequest object's responseText property.
var xmlAsAString = req.xhRequest.responseText;
var req = Spry.Utils.loadURL("GET",
"/app/book.php?id=1&code=54321", true, MySuccessCallback);
If your serverside script wants to use some other format as a
response like JSON or plain text, then you can only access the data
as text via the responseText property.
--== Kin ==--

Retrieve data from a large table from ORACLE 10g

I am working with a Microsoft Visual Studio Project that requires to retrieve data from a large table from Oracle 10g database and export the data into the hard drive.
The problem here is that I am not able to connect to the database directly because of license issue but I can use a third party API to retrieve data from the database. This API has sufficient previllege/license permission on to the database to perform retrieval of data. So, I am not able to use DTS/SSIS or other tool to import data from the database directly connecting to it.
Here my approach is...first retrieve the data using the API into a .net DataTable and then dump the records from it into the hard drive in a specific format (might be in Excel file/ another SQL server database).
When I try to retrieve the data from a large table having over 13 lacs records (3-4 GB) in a data table using the visual studio project, I get an Out of memory exception.
But is there any better way to retrieve the records chunk by chunk and do the export without loosing the state of the data in the table?
Any help on this problem will be highly appriciated.
Thanks in advance...
-Jahedur Rahman
Edited by: Jahedur on May 16, 2010 11:42 PM

Girish...Thanks for your reply...But I am sorry for the confusions. Let me explain that...
1."export the data into another media into the hard drive."
What does it mean by this line i.e. another media into hard drive???
ANS: Sorry...I just want to write the data in a file or in a table in SQL server database.
2."I am not able to connect to the database directly because of license issue"
huh?? I never heard this question that a user is not able to connect the db because of license. What error / message you are getting?
ANS: My company uses a 3rd party application that uses ORACLE 10g. And my compnay is licensed to use the 3rd party application (APP+Database is a package) and did not purchased ORACLE license to use directly. So I will not connect to the database directly.
3.I am not sure which API is you are talking about, but i am running an application of the visual studio data grid or similar kind of controls; in which i can select (select query) as many rows as i needed; no issue.
ANS: This API is provided by the 3rd party application vendor. I can pass a query to it and it returns a datatable.
4."better way to retrieve the records chunk by chunk and do the export without loosing the state of the data in the table?"
ANS: As I get a system error (out of memory) when I select all rows in a datatable at a time, I wanted to retrieve the data in multiple phases.
E.g: 1 to 20,000 records in 1st phase
20,001 to 40,000 records in 2nd phase
40,001 to ...... records in 3nd phase
and so on...
Please let me know if this does not clarify your confusions... :)
Thanks...
-Jahedur Rahman
Edited by: user13114507 on May 12, 2010 11:28 PM

Retrieve data from a db stuck in upgrade mode

Is there any clever ideas about how to retrieve data from a database that can only be started in upgrade mode? I can select my user data but cannot think of any feasible way to retrieve it out of the database in a format that i would be able to use to import into another clean/new database.
History:
10.2.0.4P26 oracle 32 bit on windows 2003 server
we are trying to recover from a power failure where we lost our c drive.
datafiles appeared to be intact, but the database has some corruption in the dictionary and it cannot be started without the upgrade option, it gets a bootstrap error if started without upgrade option.

Pl post the complete bootstrap error message. Have you opened an SR with Support ?
Unable To Open Database After Upgrade :Error ORA-01092 (Doc ID 435337.1)
Recovery Through Upgrade returns ORA-1092 on Open (Doc ID 560417.1)
HTH
Srini

Retrieve data from a non-peoplesoft application using HTTP Get

I need to retrieve data from a non-peoplesoft application. They want us to submit a HTTP GET request to their URL with a series of parameters. I am thinking about using HTTP Targert connector to accomplish this. Does anyone have sample peoplecode?
Currently we are on 8.51.10 Tools...
If there is any better way .. please let me know ..

I have used HTTP Get to get XML file from a government sanction list by hitting URL http://www.treasury.gov/ofac/downloads/sdn.xml
There is a delivered PS program that does that for vendor sanctions. I had to get the online setup correctly by creating a new custom Node with HTTP Target Connector. The program name is BSP_IMPORT. The below code is responsible for the calling the node and retrieving the data. Play around with the code below see if you can get it to meet your needs.
BSP_IMPORT_AET.BANKNODE.Value is just the custom external code that I created.
PMT_FLAT_FILE_INBOUND message is just a none rowset based message to use the web service call.
Local TR:FileUtilities:FTP &oFTPUtil = create TR:FileUtilities:FTP();
+/* HTTP */+
+/*******************************************************************************/+
Local Message &msgHTTP;
Local Message &msgResult;
+&msgHTTP = CreateMessage(Message.PMT_FLAT_FILE_INBOUND);+
+&oFTPUtil.PopulateFTPGetIBInfo(&msgHTTP, BSP_IMPORT_AET.BANKNODE.Value);+
+&msgResult = %IntBroker.ConnectorRequest(&msgHTTP);+
+/* check to see if the file is wrapped */+
+&strAllLines = &msgResult.GenXMLString();+
+&strAllLines = Substitute(&strAllLines, Char(26), " "); /* Added this line to remove invalid characters */+
+/*******************************************************************************/+
Edited by: Maher on Mar 20, 2012 3:28 PM

Unable to retrieve data from a Associative Array (?)

Hi!!!! :)))
i've a problem!!!
this is the oracle's code:
Package GEST_REPORT
IS
type rec_url is record(
TIBCDCON TBISD_30.TIBCDCON%TYPE,
etc...
SETDEL VARCHAR2(10)
type tab2 is table of rec_url index by binary_integer;
FUNCTION MAIN_SELECT
( CPLAS IN VARCHAR2)
RETURN tab2;
END;
...and a java code:
String storedProcedure = "{? = call GEST_REPORT.MAIN_SELECT(?)}";
String result = "";
try{
if (connection != null) {
CallableStatement callableStatement = null;
callableStatement = preprepareCall(storedProcedure);
// preparo parametri di input.
callableStatement.setString(2, "OM");
callableStatement.registerOutParameter(1, oracle.jdbc.driver.OracleTypes.ARRAY, "tab2");
and so on...
In the last line of code throws an 'invalid name pattern'
or
"ORA-21700: object does not exist or is marked for delete"
if registerOutParameter(1, oracle.jdbc.driver.OracleTypes.ARRAY, "ISDSV.GEST_REPORT").
Where TAB2: IS THE MY ARRAY (OR NESTED TABLE?);
GEST_REPORT: THE NAME OF PACKAGE;
ISDSV: THE USER.
do u have suggestion for retrieve data from TAB2 in JAVA??
THKS!!!!!!

Hi
Use fully qualified type name: schema_name.type_name. For your case that would be "ISDSV.tab2"
Cherrs :))

How to retrieve data from a jsp page

I have created a page with some text boxes, file, submit button. In my Ist jsp, i am dynamically add Text boxes and File (for Uploading).
In the 2nd jsp, i am used Jakarata FileUpload API. I am able to retrieve all data and files except that value of dynamicall added text boxes. That is, I cannot retrieve data from dynamically added text boxes.
Using Jakarata FileUpload API, i can retrieve values of form data using
getString() method.
I want to know that there is any way or method for retrieving form data values into String Array.
regards
madhu
[email protected]

Use parseRequest(request) to get the file information as you already are doing. However, I dont know how you can use request.getParameter("textField1") to get the other fields from the page. My work-around is as follows:
Change your submit button to an ordinary button and add an onClick event to it. Then in the javascript function that supports the onClick, add the textField1 as follows:
<form name="fileUploadForm" method="post" action="someAction" (((more code code here)))))
function submitButtonClick(){
document.fileUploadForm.action=
document.fileUploadForm.action+
"?textField1="+document.fileUploadForm.textField1.value"+
"&textField2="+document.fileUploadForm.textField2.value"+
"&textField3="+document.fileUploadForm.textField3.value";
document.fileUploadForm.submit();
As you can see in the above code, I append the textField1 name/value pair to the end of the action. Now in the server, you can use getParameter("textField1");

Retrieving data from a broken iBook.

Similar Messages

Maybe you are looking for