Retrieving data from a usb GPS receiver

What is the correct way to read from a usb device using a java application?
I guess it is in the IO area, but once the application accesses the usb device, in what form is the data received? Does java have its own format, or will it be in whatever format the device sends?
Regards

jschell wrote:
Implode wrote:
We have the driver, is there no way to read the data using our own java app, if the driver is installed? I guess that is what the app that comes with the device uses?
Can someone? Yes.
Can you (your group) do it in the time given? Unclear.
Can you (your group) do it in the time given along with everything else? I would say that beginning programmers would not be able to complete that. If you are not in fact "beginning" then maybe.
First step, already noted, you must learn how the device works. You must read the docs that come with it and probably go on line to look for more docs and examples.
But going from there, if there is NOT a specific java api then, far as I know, you must use the java comm api to communicate with random usb devices and that is not going to be easy. As I already noted this particular step is so difficult that if it was me I would skip it until the end after everything else is done. All this can give you is the starting coords anyways and to test the path finding ability you are going need a way to feed in coords manually anyways, so little benefit to having it compared to the rest of the app.I know, thanks a lot.
We aren't beginners :)
I am coming across APIs for Linux, not for windows , maybe it is time for the final(permanent) switch.
I will be back with more questions
Regards

Similar Messages

Upload data from a Garmin GPS watch.

I would like to download data from a Garmin GPS watch directly to my iPad Mini but can't find how to do it. I can physically connect it with a 'Lightning to USB Camera Adapter' lead which works well with a camera to download photographs, but when connected to the watch it always returns the message:
'Cannot use device: IOUSBCompositeDevice: the connected device uses too much power'.
Is there some way around this or do I need some other piece of equipment?
Any help would be gratefully received.

Garmin's manual doesn't mention anything about the type of systems that can be used.
All it says is 'Plug the USB cable into a USB port on your computer'. Their website isn't much help either.
That has worked ok from a PC laptop for a couple of years but the PC is now defunct and I don't want to replace it.
I would rather just use the iPad as my main connection with the www as it does most of the things I need.
Except this :-)

How to retrieve data from a read-only Excel file

Hi Developers,
I'm trying to retrieve data from a read-only Excel file. I used the same code that I used to retrieve data from a normal Excel file, but it can't work.
My code is as followed:
try
InputStream KpExcel = new FileInputStream("kp.xls");
HSSFWorkbook Kpwb = new HSSFWorkbook(KpExcel);
HSSFSheet Kpsheet = Kpwb.getSheetAt(0);
catch(Exception e)
e.printStackTrace();
System.out.println("Exception: "+e.getMessage());
The error I received is as followed:
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at org.apache.poi.hssf.record.RecordFactory.createRecord(RecordFactory.java:224)
at org.apache.poi.hssf.record.RecordFactory.createRecords(RecordFactory.java:160)
at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:163)
at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:210)
at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:191)
at photoproductionsystem.IncomingWIPPanel.getKp(IncomingWIPPanel.java:118)
at photoproductionsystem.IncomingWIPPanel.<init>(IncomingWIPPanel.java:76)
at photoproductionsystem.TabbedDisplay.<init>(TabbedDisplay.java:47)
at photoproductionsystem.Display.create(Display.java:73)
at photoproductionsystem.Display.init(Display.java:44)
at photoproductionsystem.Display.main(Display.java:229)
Caused by: java.lang.ArrayIndexOutOfBoundsException
at java.lang.System.arraycopy(Native Method)
at org.apache.poi.hssf.record.UnknownRecord.<init>(UnknownRecord.java:62)
at org.apache.poi.hssf.record.SubRecord.createSubRecord(SubRecord.java:57)
at org.apache.poi.hssf.record.ObjRecord.fillFields(ObjRecord.java:99)
at org.apache.poi.hssf.record.Record.fillFields(Record.java:90)
at org.apache.poi.hssf.record.Record.<init>(Record.java:55)
at org.apache.poi.hssf.record.ObjRecord.<init>(ObjRecord.java:61)
... 15 more
Can someone please help me with my problem? Thanks a lot in advance!

Madeline wrote:
how do I ask at Apache mailing list?I wonder why it seems to be a strange idea to some people to look at the software vendor's site for product support. :p
http://poi.apache.org/mailinglists.html

Retrieving data from TCP/IP in xml and displaying values?

Hey, I am using a program to retrieve data from a machine and outputting it in xml to the localhost. On a seperate computer, I am trying to create a client application to read the xml data from that IP host and just output the important values instead of the whole script. I am new to Labview and programming, has anyone written a program similar to what I am trying to accomplish? I searched for it but couldn't quite find what I was looking for. I really could use some help with trying to figure this out and appreciate any help or advice you could give me.

Where did you search? There are examples that ship with LabVIEW that show you how to do client-server applications using TCP/IP. Did you try those? You would need to add the parsing of the data you receive (i.e., the XML).

How do i retrieve data from a powerbook whose screen lights up but displays nothing? I have a firewire and a second powerbook...

how can I retrieve data from my old powerbook? It's screen lights up, but displays only pixelated blankness. I have a second powerbook and a firewire cable....

It would probably be correct to assume that both PowerBook computers are equipped with FireWire. The article below could possibly be of interest to you. With a bit of luck, the old computer will be recognised.
http://support.apple.com/kb/HT1661
Otherwise, it may become necessary to open the old PowerBook and remove the hard drive. The drive can then be connected to an appropriate external USB adapter, and read via another Mac.
Jan

Failed to retrieve data from the database.DB Vendor Code 156

Hi,
We recently migrated our scheduled Crystal Reports from BO XI R2 platform to BO XI 3.1, and are having issues with select reports that pull from the same SQL database. The tables and fields exist in the database - and I ran the SQL in a different tool and the syntax is correct. When I try to run an on-demand or schedule one of these reports in 3.1 Infoview I receive the following error:
Failed to retrieve data from the database. Details: [Database Vendor Code: 156 ]
Running:
CR 2008 SP2
BO XI 3.1 SP2 (FP 2.7)
Please advise! Thanks!

Hi LuAnn,
Not really clear what he said but I believe this is correct. The BOE servers are typically running under the local System Account. So when it passed the report job from the BOE Server it is the Local System account that the database is getting. We only do single hop for security. Which means if you are logged into InfoView under your local domain account and try to run a report BOE will not, unless specified in the custom database connection options in the CMC, pass your credentials to the DB but will pass the local system account credentials which is likely why these reports are failing.
As A TEST only Ask your Administrator to set up a user account in MS SQL Server that has rights to run all reports. Or when you create the report check on the option to use Trusted Authentication. Then when the reports are published to BOE your log on credentials should get passed to the DB server through BOE.
You'll have to more testing to find a Use account that you can run BOE Servers under and still maintain DB security and report level security that works for you. I also suggest you post your security questions to the BOE Administrator forum to get help configuring all of this and what others are doing.
Thank you
Don

Dynamic parameter - Failed to retrieve data from the database

I'm running a report with dynamic parameters and this report ran successfully for 2 days . For no apparent reason they stopped and the error message was received. There was no interference from head office soI'm at a loss to explain why the viewer / reports suddenly stopped working.
Now I get the following message:
Prompting failed with the following error message:
'List of values failure: fail to get values. Cause of error: Failed to retrieve data from the database. Error in file UNKNOWN.RPT: Failed to retrieve data from the database.'
Error source: prompt.dll Error code: 0x8004380D
The report is running on a Oracle database using CR-Viewer XI Product version 12.01.1.r228_v20071114
I know there is a problem with dynamic parameters and citrix, but this is not run on citrix.
Please help anypne
Edited by: tstegen on Sep 30, 2009 2:48 PM

Is this report based or Enterprise based LOV?
If you have report published to BOEnterprise, then it automatically creates a chain of objects for any dynamic parameter:
Data Connection,
Data Foundation,
Business View,
Business Element
and LOV.
Each of this objects have configurations like users rights, permissions and some have logon configuration. Failing any of those elements may cause LOV to fail.
One of the tests you may try is to test relevant Business View by connecting Crystal reports to it.
Are you familiar with Business View Manager?

Failure to retrieve data from the database (Vendor Code 6550)

I am having a trouble with two of the 6 reports that I have created. I am using Crystal XI and Oracle 10g. The underlying database object is a stored procedure that accepts as input a start time as a TIMESTAMP, an end time as a TIMESTAMP and a furnace number as a number. I have a cursor ref as a return parameter.
When I run the stored procedure in Oracle I get the selected records and can view them on the screen.
When I refresh data on the report in Crystal XI developer, the designer asks me for the start and end time and furnace number. When I input these values the report displays properly.
When I launch the report from my VB .NET 2005 application I am asked for the username and the password for the database (this is another problem I need to solve as this information I put into the program seems to be ignored in my program) then I receive the following failure message:
Failure to retrieve data from the database (Vendor Code 6550)
When I launch the other reports, they only ask me for the username and password then they display the proper data.
The main difference between my other reports and the two that are returning the above failure code is that the other reports are to either tables or views. The two that don't work are tied to stored procedures. I there any way that I can solve this problem or at least get more information?
Any help would be greatly appreciated. Let me know if you need any other information.

I have a similar problem, the only difference is that the crystal report error is only thrown when I try to load the sub reports at my web application. When I deploy my report to the Web application the main report loads up fine but when I try to launch the sub reports from the main report it can no longer load.
But when I use the Crystal report developer I am able to load the main report and it's associated sub reports without any issues.
My issue only occurs when I try to load the sub report in the web application. The following sections shows how my reports look like both in my .NET web application and also at the Crystal Report Development IDE.
Failure: Loading my Reports from .NET Web Application
1) When I load from the web application I am able to load the main report as per the print screen below.
2) When I try to click on the hyper links to enter the sub reports I am now able to load them, both sub reports cannot load and will throw the same error "
Failed to retrieve data from the database. Details: [Database Vendor Code:
6550 ] Failed to retrieve data from the database. Details: [Database Vendor
Code: 6550 ] Failed to retrieve data from the database. Error in File OAWR3011A
{CEC8A94A-4490-4640-95FB-2739A679978B}.rpt: Failed to retrieve data from the
database. Details: [Database Vendor Code: 6550 ] "
Success: Loading my Reports from Crystal Report Development Tool
1) This is my Main Report Loaded from the Crystal Report Development Tool, the first two hyperlinked fields are links to my sub reports, step number 2 and number 3 shows my sub reports when I load it using Crystal Report Developer
2) Sub Report 1 Loaded Successfully, when I click on the fields in the first link
3) Sub Report 2 loaded successfully when I click the second field hyper link

Retrieving data from XML containing namespaces?

Hi,
I am using Yahoo Local Search Service which returns the XML
response. I want to retrieve data from the XML that I received. I
stuck at this point and unable to retrieve the response in to
datagrid. Does the namespaces in XML matter while retrieving data?
The response XML is as follows
<ResultSet xsi:schemaLocation="urn:yahoo:lcl
http://api.local.yahoo.com/LocalSearchService/V3/LocalSearchResponse.xsd"
totalResultsAvailable="224" totalResultsReturned="1"
firstResultPosition="1" xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance"
xmlns="urn:yahoo:lcl">
<ResultSetMapUrl>
http://maps.yahoo.com/broadband/?q1=San+Jose%2C+CA+95112&tt=starbucks&tp=1</Result SetMapUrl>
<Result id="21590724">
<Title>Starbucks</Title>
<Address>145 W Santa Clara St</Address>
<City>San Jose</City>
<State>CA</State>
<Phone>(408) 288-8803</Phone>
<Latitude>37.335236</Latitude>
<Longitude>-121.892765</Longitude>
<Rating>
<AverageRating>4</AverageRating>
<TotalRatings>3</TotalRatings>
<TotalReviews>2</TotalReviews>
<LastReviewDate>1198029377</LastReviewDate>
<LastReviewIntro>My previous review had incorrect
data. That was not true, I am sorry, I didn't know. As far as food
and drink goes, Starbucks is pretty good.</LastReviewIntro>
</Rating>
<Distance>0.96</Distance>
<Url>
http://local.yahoo.com/info-21590724-starbucks-san-jose</Url>
<ClickUrl>
http://local.yahoo.com/info-21590724-starbucks-san-jose</ClickUrl>
<MapUrl>
http://maps.yahoo.com/maps_result?q1=145+W+Santa+Clara+St+San+Jose+CA&gid1=21590724</M apUrl>
<BusinessUrl>
http://www.starbucks.com/</BusinessUrl>
<BusinessClickUrl>
http://www.starbucks.com/</BusinessClickUrl>
<Categories>
<Category id="96926219">Cafes</Category>
<Category id="96926236">Restaurants</Category>
<Category id="96926169">Coffee Houses</Category>
</Categories>
</Result>
</ResultSet>
The code that I am writing to get Title and Address is as
follows.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="vertical"
backgroundAlpha="0" backgroundColor="#FFFFFF">
<mx:HTTPService
id="weatherService"
url="
http://local.yahooapis.com/LocalSearchService/V3/localSearch"
resultFormat="e4x"
result="resultHandler(event);"/>
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.rpc.events.ResultEvent;
[Bindable]
private var myResult:XML ;
private var temp:XMLNode;
private var list:ArrayCollection;
public function requestWeather():void {
weatherService.cancel();
var params:Object = new Object();
params.appid = "YahooDemo";
params.query = "starbucks";
params.zip = "95112";
params.results = "1"
weatherService.send(params);
public function resultHandler(event:ResultEvent):void {
myResult = XML( event.result);
temp = myResult.Result;
list = ArrayCollection(event.result);
]]>
</mx:Script>
<mx:Form width="400">
<mx:FormItem label="Get Local Data">
<mx:Button label="Get Data"
click="requestWeather();"/>
</mx:FormItem>
<mx:FormItem label="Address">
<mx:Text text="{myResult.Result.Address}"/>
</mx:FormItem>
<mx:FormItem label="Title">
<mx:Text text="{myResult.Result.Title}"/>
</mx:FormItem>
</mx:Form>
<mx:DataGrid
dataProvider="{myResult.Result}"
x="80" y="141" width="262" height="92"
id="shippingOptionsList" editable="false" enabled="true">
<mx:columns>
<mx:DataGridColumn headerText="Title" dataField="Title"
/>
<mx:DataGridColumn headerText="Address"
dataField="Address" />
</mx:columns>
</mx:DataGrid>
<mx:Label text="Response as it is"/>
<mx:TextArea id="resultFld" text="{myResult}" width="400"
height="152"/>
</mx:Application>
Can somebody help me to find where I am going wrong?
Thank you
-Pranay

Hi Pranay,
It looks like your problem is indeed to do with the XML
namespace being used.
Try adding this line after the import statements:
namespace yahoo = "urn:yahoo:lcl";
(This is the namespace URI defined in the returned XML)
The result handler should then look like this:
public function resultHandler(event:ResultEvent):void {
use namespace yahoo;
myResult = XML( event.result);
temp = myResult.Result;
list = ArrayCollection(event.result);

TCP packet out of state: First packet isn't SYN & Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]

We are transitioning from Exchange 2003 to Exchange 2010. We found Outlook online mode (non-cached mode) have many warning "Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]", usually happen when users tried to open
address book but sometimes even normal operation like click the Send button. The problem does not affect OWA and extremely rare when Outlook is running in cached mode. Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops.
We have a lot from the CAS/HT to DC/GC on TCP_3268 and LDAP. And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK.
We also have a lot from CAS/HT to the Outlook Clients on the static RPC port (TCP_59933). And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK and RST-ACK, ACK.
This happens even on Outlook 2010 which I though it has TCP Keep Alive implmented to keep the session active within 1 hour.
Can somebody tell me if these out-of-state are the cause of our problem? And how to fix it?
THANK 1,000,000

Hello AndyHWC,
I did some consulting with our CAS team and received the following feedback to your post:
It is difficult to determine what is causing resets without seeing the captures first hand however, the concern is that you are seeing dropped packets on the firewall logs. Where is this firewall located?
Based on the description "Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops." and "We have a lot from the CAS/HT to DC/GC on TCP_3268 and
LDAP." indicates to me that the firewall is between CAS and GC. This not supported under any circumstances and would explain the issue they are seeing with clients trying to "retrieve data from the GC".
If there is not a firewall between the GC and CAS then a Microsoft support engineer would need to have concurrent Netmon Captures from client, CAS, GC during the
issue to analyze. If only one GC exists consider adding another GC to handle the client requests and for fault tolerance.
Also verify that all NIC card drivers are updated to the latest driver version
More information about firewalls with Exchange 2007/2010
http://msexchangeteam.com/archive/2009/10/21/452929.aspx
http://technet.microsoft.com/en-us/library/bb232184(EXCHG.80).aspx
You can install the Client Access server role on an Exchange 2007 computer that is running any other server roles except for the Edge Transport server role. You
cannot install the Client Access server role on a computer that is installed in a cluster. Installation of a Client Access server in a perimeter network is not supported.
http://technet.microsoft.com/en-us/library/dd577077(EXCHG.80).aspx
“The Installation of a Client Access Server in a Perimeter Network Is Not Supported
Issue You may want to install an Exchange 2007 Client Access server in a perimeter network. However, this type of installation is not supported in Exchange
2007.
Cause The Exchange 2007 Client Access server role is not supported in any configuration in which a firewall is located between the Client Access server
and a Mailbox server or a domain controller. This includes firewall devices, firewall programs, or any program or device that is designed to restrict traffic between two network locations.
For correct operation, Client Access servers require typical domain connectivity to domain controllers and global catalog servers. Because any devices
or programs that restrict or reduce access to domain controllers or global catalog servers may affect the correct operation of the Client Access server, we do not support this type of configuration.
Resolution To resolve this issue, move the Client Access servers to the internal network. For more information about the ports that Exchange 2007 uses
for various services, see Data Path Security Reference.”
Thanks,
Kevin Ca - MSFT
Kevin Ca - MSFT

Error while trying to retrieve data from BW BEx query

The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

Query Report:To Retrieve Data from A/R Invoice and A/P Invoice

Hii Experts,
I am a new Sap B1 Trainee.I am facing a problem when retrieving data from A/R Invoice and A/P Invoice in order to track
Expenditure and Revenue according to a Bussiness partner,
I am using union to retrieve the information,but it is saying a error that Error Converting Varchar to Numeric and also
i would like to know how can i show the total final payment by reflecting Downpayments in A/R Invoice and A/P Invoice
With Regards
Cherry.

Hii.
My Sap B1 version is 8.8.1 and patch level is 20. Actully i need a scenario where i can able to show both Expenditure and Revenue of a particular bussiness partner and profit/loss in a single query report.
I need some tips regarding this,When i am doing union i am getting conversion error converting varchar to numeric when i take
Sum(Line Total) from OINV and Sum(line total) OPCH group by docdate and docentry and BP .
and another scenario is how to deduct A/P downpayment or A/R downpayment from A/P invoices and A/R invoice to get the final Revenue and Expenditure ..
Thanks & Regards
Cherry

Retrieve data from a list in SharePoint 2013 provider hosted App using CSOM

I have developed a provider hosted app in SharePoint 2013. As you already know, Visual Studio creates web application and SharePoint app. The web application gets hosted inside IIS and the SharePoint App in SharePoint site collection. I'm trying to get
data from a list hosted in SharePoint using CSOM. But I get ran insecure content error.
here is my code in Default.aspx
<script type="text/javascript" src="../Scripts/jquery-1.8.2.js"></script>
<script type="text/javascript" src="../Scripts/MicrosoftAjax.js"></script>
<script type="text/javascript" src="../Scripts/SP.Core.js"></script>
<script type="text/javascript" src="../Scripts/INIT.JS"></script>
<script type="text/javascript" src="../Scripts/SP.Runtime.js"></script>
<script type="text/javascript" src="../Scripts/SP.js"></script>
<script type="text/javascript" src="../Scripts/SP.RequestExecutor.js"></script>
<script type="text/javascript" src="../Scripts/App.js"></script>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div>
<input id="Button1" type="button" value="Get title via CSOM" onclick="execCSOMTitleRequest()" /> <br />
<input id="Button2" type="button" value="Get Lists via CSOM" onclick="execCSOMListRequest()" />
</div>
<p ID="lblResultTitle"></p><br />
<p ID="lblResultLists"></p>
</form>
</body>
</html>
and App.js is:
var hostwebUrl;
var appwebUrl;
// Load the required SharePoint libraries
$(document).ready(function () {
//Get the URI decoded URLs.
hostwebUrl =
decodeURIComponent(
getQueryStringParameter("SPHostUrl")
appwebUrl =
decodeURIComponent(
getQueryStringParameter("SPAppWebUrl")
// resources are in URLs in the form:
// web_url/_layouts/15/resource
var scriptbase = hostwebUrl + "/_layouts/15/";
// Load the js files and continue to the successHandler
//$.getScript(scriptbase + "/MicrosoftAjax.js",
// function () {
// $.getScript(scriptbase + "SP.Core.js",
// function () {
// $.getScript(scriptbase + "INIT.JS",
// function () {
// $.getScript(scriptbase + "SP.Runtime.js",
// function () {
// $.getScript(scriptbase + "SP.js",
// function () { $.getScript(scriptbase + "SP.RequestExecutor.js", execCrossDomainRequest); }
function execCrossDomainRequest() {
alert("scripts loaded");
function getQueryStringParameter(paramToRetrieve) {
var params = document.URL.split("?")[1].split("&");
var strParams = "";
for (var i = 0; i < params.length; i = i + 1) {
var singleParam = params[i].split("=");
if (singleParam[0] == paramToRetrieve)
return singleParam[1];
function execCSOMTitleRequest() {
var context;
var factory;
var appContextSite;
var collList;
//Get the client context of the AppWebUrl
context = new SP.ClientContext(appwebUrl);
//Get the ProxyWebRequestExecutorFactory
factory = new SP.ProxyWebRequestExecutorFactory(appwebUrl);
//Assign the factory to the client context.
context.set_webRequestExecutorFactory(factory);
//Get the app context of the Host Web using the client context of the Application.
appContextSite = new SP.AppContextSite(context, hostwebUrl);
//Get the Web
this.web = context.get_web();
//Load Web.
context.load(this.web);
context.executeQueryAsync(
Function.createDelegate(this, successTitleHandlerCSOM),
Function.createDelegate(this, errorTitleHandlerCSOM)
//success Title
function successTitleHandlerCSOM(data) {
$('#lblResultTitle').html("<b>Via CSOM the title is:</b> " + this.web.get_title());
//Error Title
function errorTitleHandlerCSOM(data, errorCode, errorMessage) {
$('#lblResultLists').html("Could not complete CSOM call: " + errorMessage);
function execCSOMListRequest() {
var context;
var factory;
var appContextSite;
var collList;
//Get the client context of the AppWebUrl
context = new SP.ClientContext(appwebUrl);
//Get the ProxyWebRequestExecutorFactory
factory = new SP.ProxyWebRequestExecutorFactory(appwebUrl);
//Assign the factory to the client context.
context.set_webRequestExecutorFactory(factory);
//Get the app context of the Host Web using the client context of the Application.
appContextSite = new SP.AppContextSite(context, hostwebUrl);
//Get the Web
this.web = context.get_web();
// Get the Web lists.
collList = this.web.get_lists();
//Load Lists.
context.load(collList);
context.executeQueryAsync(
Function.createDelegate(this, successListHandlerCSOM),
Function.createDelegate(this, errorListHandlerCSOM)
//Success Lists
function successListHandlerCSOM() {
var listEnumerator = collList.getEnumerator();
$('#lblResultLists').html("<b>Via CSOM the lists are:</b><br/>");
while (listEnumerator.moveNext()) {
var oList = listEnumerator.get_current();
$('#lblResultLists').append(oList.get_title() + " (" + oList.get_itemCount() + ")<br/>");
//Error Lists
function errorListHandlerCSOM(data, errorCode, errorMessage) {
$('#lblResultLists').html("Could not complete CSOM Call: " + errorMessage);
Any solution is appreciated.

Hi,
To retrieve data from list in your provider-hosted app using SharePoint Client Object Model(CSOM), you can follow the links below for a quick start:
http://msdn.microsoft.com/en-us/library/office/fp142381(v=office.15).aspx
http://blogs.msdn.com/b/steve_fox/archive/2013/02/22/building-your-first-provider-hosted-app-for-sharepoint-part-2.aspx
Best regards
Patrick Liang
TechNet Community Support

Retrieve data from a synonym in oracle database through db connect

Hi Everyone,
I have created certain synonym for some tables in oracle. I want to retrieve data from it through db connect but where through source system and then selecting database tables, only tables and views are available.
Synonyms are not available to create data sources and retrieve the data from it. Why is it so. Is this a limitation of db connect.
Can anyone please let me know about it.
Thanks,
Joshua.

Hi,
You want to import data from an external Oracle database into your BW 3.X. To do this, you can connect the external database to the BW 3.X release as a source system using the external database connect. BW 3.X here represents BW 3.0, BW 3.1 and BW 3.5 because in other (DB relevant) parts, all 3 versions are based on the same source code.
General information
The above function allows you to load data from an external Oracle database (not a BW database) into your BW 3.0 system.
There may also be constellations which cannot be used directly through the DB Connect access. However, it should be possible to find an adequate, customer-specific solution for most of these scenarios.
In such situations, the resulting work falls into the area of Consulting and cannot be handled via Support.
Successful implementation of a connection requires corresponding expertise and experience in the use of the source database in the areas:
                - Tools
                - SQL syntax
                - DB-specific functions
Corresponding knowledge of the source application is also required to ensure that semantically relevant data arrives in the BW system.
Procedure
You should execute the following steps to connect the source system (Q) to the BW system (BW):
Installing the client software on an BW application server
                     Of course, you only need to install the client software if you are using BW with a non-Oracle database.
                     Use the Oracle setup program on the database CD (runInstaller on Unix) to start the OracleInstaller. Follow the program instructions and the DB installation instructions to install the Oracle Client software on BW.
Testing connection setup from BW to Q
                     After you install the client software on BW, try to set up a connection from BW to the server on Q. You may need to adjust the tnsnames.ora or sqlnet.ora files for this, to introduce the Oracle systems (to which contact should be made) to BW. You can test the connection by executing the command "tnsping QDB" on BW to check whether the client has established contact to the QDB database on the Q system.
Creating a separate U user in Q
                     We recommend that you create a separate U user in Q for connection to BW. This means that authorization and administration questions can be solved centrally.
Displaying data sources in Q for the U user
                     To provide U data for users other than U, you can create views on other user tables as user U:
                     CREATE OR REPLACE VIEW viewname AS
                       SELECT * FROM QDB.tablename
                     You may have to grant SELECT privileges to user U in the QDB schema:
                        GRANT select ON QDB.tablename TO U
                     Of course, you can also restrict or reformat data in the view arrangement (for example, change from internal date format into the SAP date format). JOIN operations using several tables are also available.
                     !!! Synonyms do not yet work!!!
                     Synonyms that you can create as described below are another option for providing a complete table for the user U:
                       CREATE SYNONYM synoname FOR QDB.tablename
                     !!! Synonyms do not (yet) work!!!
                     After you have displayed the require data for user U, you can simply use
                       SELECT * FROM <view or table>
                     on the Q system to check which data is returned.
                     You can now open a link to Q as user U in the BW system with SQLPLUS and check, using the same SELECT, whether this data is also seen in the Oracle client. If this is not the case, there is probably a connection problem.
Creating a connection from BW to Q in BW
Including data sources of user U user in Q in BW.
Solution
Supported BW, Basis and BW 3.0B database versions, Basis 6.20 Support Package 2 (or higher)
      Oracle 8.1 (or higher, see below)
Possible problems
- Synonyms do not (yet) work!
Up to now, only tables and views have been used as data sources for the DB Connect from the R3 Basis. As soon as synonyms are also used in the Basis, you will be able to convert created views (or even replicated tables) to synonyms as a workaround.
With Basis 6.40 at the earliest, therefore as of BW 3.5, you will also be able to use synonyms. Until then, the following will help:
CREATE VIEW <view_on_synonym> AS SELECT * FROM <synonym>
- The source DB must have at least the release version of the BW DB.
Oracle only ensures the support of client-server links if the version of the client is not higher than that of the server. So if BW has Oracle version 8.1 and, as in the case of Dbconnect, is run as a client against the server of the source database, the source database must have at least release Oracle 8.1 or higher.
Of course, you have the option to install the Oracle client software of a lower version and then use this for the DB connect. This is also the procedure used to work with a DB connect on external databases of other vendors.
Furthermore, the implementation of the DBconnect function in BW uses SAP Basis functions. Specifications of Oracle 8.1 database catalogs are used here. The source database must therefore have at least Version 8.1.
- Oracle Client Software Version
If you want to connect from an Oracle BW DB to an Oracle source DB, for the DB connect you naturally use the client software that you already installed on each application server.
If you want to connect from a non-Oracle BW DB to an Oracle source DB, check item 3 of note 521230 to see which Oracle client software version is released with your BW R3 kernel and use this version.
- Date and time fields in Oracle and their conversion into SAP-compatible column formats
Example with a DATE field:
Since a SAP table does not have a DATE field (date values are NUMC(8) and time specifications are NUMC(6)), we will use the Oracle DBA_TABLES system table as an example.
    SQL> desc dba_tables;
The Oracle DBA_TABLES system table has a LAST_ANALYZED field. This is a DATE type field and is recognized as a date field of 7 characters by DBA_CONNECT. However, the import does not work because the DATE is a 7-byte conglomerate of "...century, year, month, date, hour, minute and second." (extract from the Oracle documentation).
To make this DATE field legible for DB connect, you must use the TO_CHAR function in a VIEW. This should display the following examples:
SQL> select LAST_ANALYZED from dba_tables
      where table_name like 'RS%' and rownum < 10 ;
The formatting used here is the default used implicitly by SQLPLUS.
SQL> select to_char(LAST_ANALYZED,'YYYYMMDD') as dat from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format YYYYMMDD and should be loaded correctly by the DB connect as a date.
SQL> select to_char(LAST_ANALYZED,'HH24MISS') as tim from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format HHMMSS and should be loaded correctly by the DB connect as a time.
You can use the following example for more detailed experiments:
SQL> select to_char(
       TO_DATE('03-FEB-2001 04:05:06','DD-MON-YYYY HH24:MI:SS'),
       'YY-MM-DD HH24-MI-SS') as datim from dual;
with the result:
DATIM
01-02-03 04-05-06
When you create a VIEW and use the TO_CHAR function (or other functions), you should easily be able to avoid problems with the interpretation of date/time specifications (and other reformatting).
Details about the functions and the formats are contained in the Oracle documentation.
- Special characters
A words that contain special characters can only be imported correctly if the code pages in BW and in the source system are identical. If the code pages are not the same, DB Connect can be used if the characters to be imported appear under the first 127 characters of the character set.
The use of multibyte code pages in the source system for saving data using character sets with more than 256 characters (Kanji, Katakana, Hiragana, Korean, Chinese, Tagalog, Khmer, Arabic, Cherokee, and so on) can cause the characters to become corrupt.
For questions concerning the code pages, also refer to the FAQ note 606359 and question/answer 19 that appears there.

Retrieve data from a dynamic page via loadURL

Hello.
I would like to ask you how it is possible to retrieve data
from a dynamic page (asp classic in my case) using the loadURL
method.
I would like to create an html authentication form (with
username and password fields). The loadURL method should call an
asp page and then pass to the usual function 'DoIfSucceded' the
results of the elaboration.
Of course I'm going to have a switch in the function in order
to make different actions depending from the results of the asp
page (authentication succeded or failed).
I had a look to the examples at this page:
Adobe
samples
Is there anyone who can explain clearly how the results data
must be written by the asp page and how the success function can
retrieve them ?
I thank you in advance for your help.

loadURL() uses the the XMLHttpRequest Object so if the
content you return is XML, you have 2 choices for accessing your
data. You can either access it as a text string via the
XMLHttpRequest object's responseText property, or as a DOM document
via the XMLHttpRequest object's responseXML property:
function MySuccessCallback(req)
// If my data is XML, I can access the data that was sent
from the server
// as DOM elements via the XMLHttpRequest's responseXML
property.
var xmlDOM = req.xhRequest.responseXML;
// OR, you can access the data sent back from the server as
text via
// the XMLHttpRequest object's responseText property.
var xmlAsAString = req.xhRequest.responseText;
var req = Spry.Utils.loadURL("GET",
"/app/book.php?id=1&code=54321", true, MySuccessCallback);
If your serverside script wants to use some other format as a
response like JSON or plain text, then you can only access the data
as text via the responseText property.
--== Kin ==--

Retrieving data from a usb GPS receiver

Similar Messages

Maybe you are looking for