Retrieving ethernet address???

how to access ethernet address of a machine??

That is an Network/Socket issue; perhaps post in a more appropriate forum.
Meanwhile, have a look at the InetAddress APIs.
Reagrds.

Similar Messages

Ethernet address setup

Hi,
I am trying to configure a network interface
for IPv4 in Solaris 8.
I setup the IP address, the broadcast
address and the Interface flags using
ioctl commands SIOCSIFADDR,
SIOCSIFBRDADDR and SIOCSIFNETMASK.
How do I setup the MAC address (Ethernet address)
for this interface? Its different from that for
the rest of the network interfaces in this machine,
so the default address doesn't work.
Thanks.

Hello,
I, also, am trying to get the ethernet address for a Solaris machine. I have been looking though the Documentation and using ioctl; however, I do not know what flags to use. The main one I have been working with is SIOCGLIFADDR. Moreover, I use lifr_req.lifr_name, hme0. But, when I print the ethernet address one byte at a time as a unsigned char, my results are not the same as the output using ifconfig -a. Does anyone know how to retrieve the ethernet address on a Solaris machine?
Thank you,
Larry-0 at Conetic

How to retrieve Delivery address when entered manually in PO

Hi All,
I am trying to print PO through Smartform. I am retrieving the delivery address based on the adrnr number/Customer number/Vendor Number from EKPO table. Now when the user manually changed the address with out adrnr/Customer number/Vendor Number, how to retrieve that address in order to print as these three fileds will be blank in EKPO table. How and where the SAP will store that address. Any help thanks.

Hi,
In the sales order point of view I know it will be stored in the ADRC table for the VBPA-ADRC number entry. Similar to that I hope the EKPO ADRC will have an another entry in the ADRC table.
Thanks,
Greetson

I was given a replacement and told to set it up on itunes but now I cannot retrieve my address book, can anyone help please?

I was given a replacement and told to set it up on itunes but now I cannot retrieve my address book, can anyone help please?

a message appears saying that there is a problem with the windows installer.
What's the precise text of the message please? (There's a few different ones I can think of that you might be getting.)

Reading the ethernet address without root permissions

Hello,
Is there a way to get the ethernet address of a network interface without root permissions (in a user program)?
I need the mac address in order to generate DCE's uuids. The mac address is used as a unique machine identifier.
Serge

HI
You may use this program copied from a technote 2856-09 to get MAC address in C. Works fine only if arp cache is present though . It
does not talk to the driver directly . May be usefull to you. Compile
with "-lsocket -lnsl" flags.
<pre>
#include <stdio.h>
#include <sys/types.h>
#include <sys/sockio.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>
#include <errno.h>
main(argc, argv)
int argc;
char *argv[];
int sockfd, i;
struct arpreq arpreq;
struct sockaddr_in *sin;
struct hostent *hp;
char host[256];
if(argc != 2)
printf("Usage : %s hostname\n", argv[0]), exit(1);
strcpy(host, argv[1]);
bzero(&arpreq, sizeof(struct arpreq));
arpreq.arp_pa.sa_family = AF_INET;
sin = (struct sockaddr_in *)&arpreq.arp_pa;
sin->sin_family = AF_INET;
sin->sin_addr.s_addr = inet_addr(host);
if (sin->sin_addr.s_addr == -1) {
hp = gethostbyname(host);
if (hp == NULL) {
fprintf(stderr, "%s: %s: unknown host\n",
argv[0], host);
exit(1);
bcopy((char *)hp->h_addr, (char *)&sin->sin_addr,
sizeof
(sin->sin_addr));
if ( (sockfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0 )
perror("can't open datagram socket");
if (ioctl(sockfd, SIOCGARP, (caddr_t)&arpreq) < 0)
if (errno == ENXIO)
printf("%s (%s) -- no entry\n",
host, inet_ntoa(sin->sin_addr));
else
perror("SIOCGARP IOCTL failed");
exit(1);
printf("Hostname : %s", host);
for (i=0; i<6; i++)
printf("%c%x", i == 0 ? '\t': ':', (unsigned
char)arpreq.arp_ha.sa_data);
printf("\n");
close(sockfd);
exit(0);
</pre>

Cannot connect to server with ttisqlcs, Failed to retrieve IP address of the system

Please help me, I installed timesten server and client on different machines in LAN, but with the same user and group - ttadmin:ttgroup
When I tried to connect to server with ttisqlcs -connStr "DSN=sampleCS"
The output gave me error messages as below
connect "DSN=sampleCS";
S1000: Failed to retrieve IP address of the system. System error: -2
The command failed.
Done.
The related part in sys.ttconnect.ini is set as below
[192.168.0.206]
Description=TimesTen Server
Network_Address=192.168.0.206
TCP_PORT=53397
And the sys.odbc.ini
[ODBC Data Sources]
sampleCS=TimesTen 11.2.2 Client Driver
[sampleCS]
TTC_SERVER=192.168.0.206
TTC_SERVER_DSN=nredb_ds
What does it mean by "retrieve IP" ?
Does it try to resolve IP by the hostname even when I already gave it the ip address?
By the way I can ping 192.168.0.206 and telnet at port 53397 with no problem.
Please help me, thanks~

Try changing your entries as follows and see if it fixes it:
sys.ttconnect.ini
[myserver]
Description=TimesTen Server
Network_Address=192.168.0.206
TCP_PORT=53397
sys.odbc.ini
[ODBC Data Sources]
sampleCS=TimesTen 11.2.2 Client Driver
[sampleCS]
TTC_SERVER=myserver
TTC_SERVER_DSN=nredb_ds
Chris

Fail to retrieve IP address: Want to print wirelessly to HP C4385 from iMAC

I've gone through so many threads that I'm losing track. Where do I start?
I have my PC downstairs with an HPC4385 printer connected via USB. I have my Intel iMAC upstairs and it is connected wirelessly via my Airport Express (also located downstairs - no issues connecting to the web). I want to print to the C4385 wirelessly from my iMAC (as it has the capability... supposedly), but I can't get past the configuration stage. I can see my network, successfully enter my network password, but then get a "Failed to retrieve IP address" on all counts.
FYI: I don't have setup button to print a report showing my printer's IP address either. I actually don't know if that matters, or not.
Has anyone successfully bypassed this issue to print wirelessly?
Please help.

Wish I could be helpful, but I'll "second," this request for information. I'm trying to do the exact same thing with the exact same printer, and I'm getting the exact same problem.

Multiple ethernet addresses vs. IP addresses

Hi,
Using Workgroup Manager on SLS 10.6.4, I have successfully mapped hosts and their MAC addresses to fixed IP addresses within our LAN. All is well, until someone works on the back of one of the Mac Pros and ends up plugging the ethernet cable into jack #2 instead of #1. Now the MAC address is unintentionally different.
I suppose I could make a secondary set of hostnames for ethernet2, but that seems ugly and if you're depending on host foobar being available for a particular printer, but it's now foobar2, that seems unpredictable.
How do you deal with this? I assume this is in the same realm as having a laptop that connects via wireless one day but via an ethernet cable the next day? It's the same host, just not the same MAC address. Does WGM have a way to deal with multiple ethernet addresses?
Thanks,
-- Antoine

ahh, i see.
you're running up against a few limitations here.
bootpd uses MACs to define static mappings.
OD uses MACs to identify nodes/clients.
your client machines have multiple MACs and may present one or the other on the network, depending on whether someone plugs in the wrong port.
here are some options/workarounds off the top of my head:
1. disable the second interface. if you need it for some reason, you'll have to deal with this situation another way.
2. bond the two interfaces. the downside is that you'll need to have both plugged in for optimal results, but you'll have one MAC, i believe.
3. use another dhcp server configured to deny all dhcp requests except those from your approved MACs (en1, let's say).
4. use local MCX and not deal with changing MACs at all. this is a little more difficult to manage, however.
5. manage prefs in some other way, like with puppet or casper, that don't strictly depend on MACs.
i'm sure there are other ways to deal with this situation, but if you're managing these systems, i'd probably just disable the second interfaces. people will learn quickly when they can't access the network. determine if this is more of a technological or a policy/personnel management issue.

Yukon: Ethernet and Airport: Ethernet addresses...

Sorry if this is a stupid question but what is the difference between the Yukon and Airport ethernet addresses? Are they supposed to be the same or different? Many thanks.

Hello,
The first is Ethernet, the second is Wifi or Airport, those are two different interfaces, now as far as addresses go, they have IP addresses, and Hardware Machine Access Code addresses.
To see them, At the Apple Icon at top left>About this Mac, then click on More Info, then click on Network.
It can be confusing how the term Ethernet is used.

Ethernet address conflict

So I have been getting the message:
"The ethernet address you have chosen conflicts with an ethernet address to another computer.
You can't assign the ethernet address xx:xx:xx:xx:xx:xx to two different computers."
Of course I use the actual MAC address in place of the x's, but I have searched the entire directory and this MAC address is not in use.
Now it use to be bound, but was deleted some time ago. I changed its name, to assign it to another lab on campus, and rebound it with this error message. I have a handful of Macs this is happening to. Not sure how to purge or "cleanup" OD. I am sure it needs a good cleaning to clear out its spiderwebs, but flushing OD cache did not help.
Any advice or references would be most appreciated. I am running 10.5.8 Server on an Xserve.
Thank you

Of course I use the actual MAC address in place of the x's, but I have searched the entire directory and this MAC address is not in use.
I don't understand this statement. The message isn't telling you there is a device in your directory with that IP address, it's telling you that there's a machine on your network that's using the address.
That device doesn't have to be in your directory, it doesn't have to be using DHCP.. it's just physically connected. Whether it should be, or whether it should have a different IP address is something you'll need to determine.
Do you know the device it's referring to? The MAC address will map to a physical device. If you don't know which device it is you may be able to wean that information from your switches, which may tell you which port it's connected to (assuming it's a wired ethernet device).

Hardware ethernet address

Hey everyone,
I'm trying to help a friend set up her wireless printer but I'm having some problems finding the hardware ethernet address for her Photosmart C4780. Does anyone have any advice on where I can look to find this?
Thanks a lot!

Do you mean the MAC address (Media Access Control - network device "serial number") or the IP address?
Both should be on the Network Config Test in the Setup [Scan] > Network area of the printer control panel.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Acsess ethernet address???urgent

How to access the ethernet address of a machine?

Perhaps coul you use the output of ifconfig or ipconfig of the OS and parse it

Ethernet address

Hi,
I am trying to get an ethernet address by sending ioctl to socket descriptor. I am using SIOCGENADDR command. Looks like this is not supported under Solaris 8.0. Due to some reasons, I do not wish to use DLPI for getting the same.
The sockio.h has the definition for above command.
Any idea, what is going wrong?
-Bob

Using the SIOCGIFCONF ioctl to learn the interface name? Section 16.6
of UNIX Network Programming, Volume 1, Second Edition by the late W. Richard
Stevens provides a good example of its use.
Please refer this URL for source code :
http://www.cis.temple.edu/~ingargio/cis307/software/StevensBook/unpv12e/ioctl/
Thanks,
Senthilkumar
Developer Technical Support
http://www.sun.com/developers/support

Ethernet address on two trunked switches at the same time

I have two access layer switches sharing a dot1q trunk ( a port channel with four members), and an HP blade server with one connection (a port channel with two members) into each.. The blade server's connections into each switch is also a dot1q trunk tagging just one vlan. In each connection from the blade server to each switch the mac addresses look very much alike. I determine this by writing a script to log into both switches at once and run the "show mac add int" command on each port channel to the blade server. In tcpdumps the commands are sent typically about .1 - .4 seconds apart on average.
So if the "show mac addr int" command is being run .1 - .4 seconds apart on each switch and have a number of mac addresses in common, would this indicate that these ethernet addresses are flapping in a way that might cause interruptions in packet delivery? Some are experiencing missed pings. No VPCs are used in this configuration - just a pair of either 6509 or 7018 switches connected via a dot1q port channel.

It sounds to me like what you are trying to achieve is network teaming on the HP Blade Server whereby you can have a connection to two different switches.
Natively something like this would cause problems because both switchports (or portchannels) would see the same L2 Address which would then confuse upstream switches as they would not know where to forward frames to. I believe the HP servers may allow this type of setup but it requires a specific config on the teaming element to prevent a single MAC address being shown on two different ports.
Have a read of the whitepaper below:
http://www.hp.com/sbso/bus_protect/teaming.pdf

WLC4402 sends strange ethernet address in snmp reply

Hello,
I got a very strange thing with 7.0.250.0 on a WLC 4402 controler. My snmp query receives this entry for one particular wifi client:
.1.3.6.1.4.1.14179.2.1.4.1.1.68.116.108.115.51.42 "Dtls3*" as ethernet address.
It is the ascii representation of 44:74:6c:73:33:2a. The expected snmp string is "44:74:6c:73:33:2a".
Have you already seen this kind of bugs?

Yes, you are right. Thanks.
"MAC address entries need to be queried with the SNMP option -O x so that they only return results in HEX."

Retrieving ethernet address???

Similar Messages

Maybe you are looking for