Retrieving RM061 for report

im currently revising a report in query
i will include RM06I-MEIN1 field from the program code SAPMM06I
is it possible? can anyone help me pls.
reward awaits for all the help.
thanks!
Message was edited by:
        SAP Newbie

Hi,
  Thats a standard report you would not be able to do it directly as the report would only open in display mode.
But you can copy the report and then make changes to the new copied version of the report.
Regards,
Himanshu
Message was edited by:
        Himanshu Verma

Similar Messages

  • Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

    Hi,
    I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
    when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
    Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
    so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
    Could you please advise on this.
    Appreciate all and any help.
    Thanks,
    Divya

    Hi Divya,
    Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
    To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
    values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Query retrieval limit for discoverer reports in oracle applications

    Hi,
    I would like to set the query retrieval limit for discoverer reports in oracle applications. Can i have the steps for the same?
    Cheers
    Maytas

    Hi Maytas
    As Michael said the query retrieval limit can be defined by Discoverer Administrator
    like :
    - Discoverer Administrator >> Tools >> Privilege >> Select the user that will see the workbook >> Query Governor tab and there you setup the query retrieval limit.
    Note:
    Normally if you defined the limit for the user via Discoverer Administrator it should work but i saw that this was not happened in my case when i open Viewer so i entered with my eul owner on Discoverer Plus and defined the limit for all the workbooks
    Tools >> Options >> Query Governor >> Limit Query retrieved data to
    Regards,
    Dani

  • Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"

    As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
    The installation never actually starts, it errors before then.
    It displays the same error even if I run the System Configuration Checker.
    The summary.txt for the install displays the following text:
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -1554760125
      Exit facility code:            852
      Exit error code:               15939
      Exit message:                  Failed to retrieve data for this request.
      Start time:                    2014-08-15 16:49:52
      End time:                      2014-08-15 16:50:06
      Requested action:              RunRules
    Machine Properties:
      Machine name:                  servername
      Machine processor count:       8
      OS version:                    Windows Server 2008 R2
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  Yes
    Product features discovered:
      Product              Instance             Instance ID                   
    Feature                                  Language            
    Edition              Version         Clustered
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL Server 2008 R2
      Type:                          RTM
      Version:                       10
      SPLevel:                       1
      Installation location:         c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
      Installation edition:          EXPRESS
    User Input Settings:
      ACTION:                        RunRules
      CONFIGURATIONFILE:             
      ENU:                           True
      FARMACCOUNT:                   <empty>
      FARMADMINPORT:                 0
      FARMPASSWORD:                  *****
      FEATURES:                      
      HELP:                          False
      INDICATEPROGRESS:              False
      INSTANCENAME:                  <empty>
      PASSPHRASE:                    *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      RULES:                         GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
      UIMODE:                        AutoAdvance
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
    Detailed results:
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report file:               The rule result report file is not available.
    Exception summary:
    The following is an exception stack listing the exceptions in outermost to innermost order
    Inner exceptions are being indented
    Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
        Message:
            Failed to retrieve data for this request.
        Data:
          HelpLink.ProdName = Microsoft SQL Server
          HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
          HelpLink.LinkId = 20476
          DisableWatson = true
        Stack:
            at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
            at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
            at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
            at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
            at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
            at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
            at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
        Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
            Message:
                    The network path was not found.
            Data:
              WatsonData = [email protected]rror
            Stack:
                    at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
    view)
                    at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
                    at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
                    at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
                    at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
                    at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                    at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
                    at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)

        Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
            Message:
                    The network path was not found.
            Data:
              WatsonData = [email protected]rror
    Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
    Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
    of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you  remove all SQL Server components from add remove program
    I strongly recommend you to have a good look at below thread
    http://support.microsoft.com/kb/2000257/en-us
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • Failure to install SQL Server 2012 SP1 CU8/9 with a "Failed to retrieve data for this request." error

    Hi all,
    Has anyone come across SQL Server 2012 SP1 CU8/9 failing to install with a “Failed to retrieve data for this request.” error.
    The error is too generic for a useful search on web, for me at least anyway.
    Had no problems patching a whole bunch of other servers in the same environment.
    I’m no good at reading these error logs. For some reason the primary replica is referenced in the detailed log???
    The CU8/9 patch has been run by both Domain Admins and local Admin with no luck.
    We are trying to patch a secondary failover replica. (SharePoint 2013 is installed on this server.)
    This is from the summary log:
    Overall summary:
      Final   result:                    The patch installer has failed to update the shared features. To determine   the reason for failure,
    review the log files.
      Exit code   (Decimal):             -2146233088
      Exit facility   code:            19
      Exit error   code:                 5376
      Exit   message:                    Failed to retrieve data for this request.
      Start   time:                      2014-04-10 11:51:11
      End   time:                        2014-04-10 11:51:49
      Requested   action:                Patch
      Exception help link:            
    http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3412.0&EvtType=0xB2652E58%400xDC80C325&EvtType=0xB2652E58%400xDC80C325
    Machine Properties:
      Machine   name:                    VMSPDB2
      Machine processor   count:       4
      OS version:                      Future Windows Version
      OS service   pack:                
      OS   region:                       Australia
      OS   language:                     English (United States)
      OS   architecture:                 x64
      Process   architecture:          64 Bit
      OS   clustered:                    Yes
    Product features discovered:
      Product                Instance               Instance ID                     
    Feature                                    Language              
    Edition                Version         Clustered  Configured
      SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Database
    Engine Services                   1033                   Enterprise Edition  
    11.1.3000.0     No           Yes      
      SQL Server   2012        MSSQLSERVER          MSSQL11.MSSQLSERVER              SQL Server  
    Replication                     1033                   Enterprise
    Edition     11.1.3000.0       No           Yes      
      SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Full-Text
    and Semantic Extractions for Search   1033                   Enterprise Edition   11.1.3000.0       No        
    Yes        
      SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Data
    Quality Services                      1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Management   Tools -   Basic                   1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Management Tools - Complete                1033                   Enterprise Edition  
    11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Client Tools Connectivity                  1033                   Enterprise Edition  
    11.1.3000.0     No           Yes      
      SQL Server   2012                                                           
    SQL Server Data   Tools                      1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Integration   Services                       1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
    Package properties:
        Description:                     Microsoft SQL Server 2012 Service Pack 1
        ProductName:                     SQL Server 2012
        Type:                            RTM
        Version:                         11
        SPLevel:                         1
      KBArticle:                       KB2931078
        KBArticleHyperlink:             
    http://support.microsoft.com/?kbid=2931078
        PatchType:                       QFE
        AssociatedHotfixBuild:         0
        Platform:                        x64
        PatchLevel:                      11.1.3412.0
        ProductVersion:                  11.1.3000.0
        GDRReservedRange:                10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
        PackageName:                     SQLServer2012-KB2931078-x64.exe
      Installation   location:           e:\90a192411a98d1f6dc\x64\setup\
    User Input Settings:
        ACTION:                          Patch
        ALLINSTANCES:                    false
        CLUSTERPASSIVE:                  false
        CONFIGURATIONFILE:              
      ENU:                             false
        HELP:                            false
      IACCEPTSQLSERVERLICENSETERMS:    false
        INDICATEPROGRESS:                false
        INSTANCEID:                      <empty>
        INSTANCENAME:                    <empty>
        QUIET:                           false
        QUIETSIMPLE:                     false
        SQMREPORTING:                    false
        UIMODE:                          Normal
        X86:                             false
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report   file:                 The rule result report file is not available.
    Exception summary:
    The following is an exception stack listing   the exceptions in outermost to innermost order
    Inner exceptions are being indented
    Exception type:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
        Message:
            Failed to retrieve data for   this request.
        HResult : 0x80131500
        Data:
          HelpLink.ProdName   = Microsoft SQL Server
            HelpLink.BaseHelpUrl =
    http://go.microsoft.com/fwlink
            HelpLink.LinkId = 20476
            HelpLink.EvtType =
    0xB2652E58@0xDC80C325
          DisableWatson   = true
        Stack:
            at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath, String   clusterDiscoveryDocRootPath)
            at   Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String   actionId)
            at   Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId,   TextWriter errorStream)
            at   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter   statusStream, ISequencedAction actionToRun, ServiceContainer context)
        Inner exception type:   System.ComponentModel.Win32Exception
            Message:
                    Not   all privileges or groups referenced are assigned to the caller.
            HResult : 0x80004005
            Error : 1300
              Stack:
                    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
                      at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
                      at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey
    key)
                      at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey
    machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
                      at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView,
    String regPath, RegistryAccess   registryAccess)
                      at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
                      at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
                      at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    And the tail of the detailed log:
    (01) 2014-04-10 11:51:29 Slp: Completed Action:   InitializeMsiExtension, returned True
    (01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:30 Slp: Running Action:   AddPackageModifierSourcesAction
    (01) 2014-04-10 11:51:30 Slp: Completed Action:   AddPackageModifierSourcesAction, returned True
    (01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:30 Slp: Running Action:   InitializeConfigAction
    (01) 2014-04-10 11:51:30 Slp: Completed Action:   InitializeConfigAction, returned True
    (01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:30 Slp: Running Action:   RunRemoteDiscoveryAction
    (01) 2014-04-10 11:51:31 Slp: Running discovery on local   machine
    (01) 2014-04-10 11:51:33 Slp: Discovery on local machine   is complete
    (01) 2014-04-10 11:51:33 Slp: Running discovery on remote   machine: VMSPDB1
    (01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
    (01) 2014-04-10 11:51:36 Slp:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to   retrieve data for this request. ---> System.ComponentModel.Win32Exception:   Not all privileges or groups referenced are
    assigned to the caller.
      at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
       at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
       at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey key)
       at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess
    registryAccess,   Boolean& alreadyCached)
       at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
       at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
       at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
       at   Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
       at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request   req, Object ci)
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
       --- End of inner exception stack trace ---
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath, String   clusterDiscoveryDocRootPath)
    (01) 2014-04-10 11:51:36 Slp: Error: Action   "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction"   threw an exception during execution.
    (01) 2014-04-10 11:51:36 Slp:   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed   to retrieve data for this request. --->   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to  
    retrieve data for this request. ---> System.ComponentModel.Win32Exception:   Not all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey key)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView
    regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:36 Slp:    --- End of   inner exception stack trace ---
    (01) 2014-04-10 11:51:39 Slp: Received request to add the   following file to Watson reporting:   C:\Users\HS2\AppData\Local\Temp\tmp6614.tmp
    (01)   2014-04-10 11:51:39 Slp: The following is an exception stack listing the   exceptions in outermost to innermost order
    (01)   2014-04-10 11:51:39 Slp: Inner exceptions are being indented
    (01)   2014-04-10 11:51:39 Slp:
    (01)   2014-04-10 11:51:39 Slp: Exception type:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
    (01)   2014-04-10 11:51:39 Slp:     Message:
    (01)   2014-04-10 11:51:39 Slp:           Failed to retrieve data for this request.
    (01)   2014-04-10 11:51:39 Slp:     HResult : 0x80131500
    (01) 2014-04-10 11:51:39 Slp:       Data:
    (01) 2014-04-10 11:51:39   Slp:       HelpLink.ProdName = Microsoft SQL   Server
    (01) 2014-04-10 11:51:39   Slp:       HelpLink.BaseHelpUrl =
    http://go.microsoft.com/fwlink
    (01) 2014-04-10 11:51:39   Slp:       HelpLink.LinkId = 20476
    (01) 2014-04-10 11:51:39 Slp:       Stack:
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath,
    String   clusterDiscoveryDocRootPath)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String   actionId)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId,   TextWriter errorStream)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter   statusStream, ISequencedAction actionToRun, ServiceContainer
    context)
    (01)   2014-04-10 11:51:39 Slp:     Inner exception type:   System.ComponentModel.Win32Exception
    (01)   2014-04-10 11:51:39 Slp:           Message:
    (01)   2014-04-10 11:51:39   Slp:                   Not all privileges or groups referenced are assigned to the caller.
    (01)   2014-04-10 11:51:39   Slp:                  
    (01)   2014-04-10 11:51:39 Slp:           HResult : 0x80004005
    (01)   2014-04-10 11:51:39 Slp:           Error : 1300
    (01) 2014-04-10 11:51:39   Slp:         Stack:
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean  
    enable)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer  
    ctx, String machineName, SqlRegistryKey key)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx,
    String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer  
    ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String  
    machineName, RegistryView regView)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:39 Slp:                   at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:44 Slp: Watson Bucket 2
     Original Parameter Values
    (01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server  
    2012@RTM@KB2931078
    (01) 2014-04-10 11:51:44 Slp: Parameter 1 :   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process
    (01) 2014-04-10 11:51:44 Slp: Parameter 2 :   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege
    (01) 2014-04-10 11:51:44 Slp: Parameter 3 :
    Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException@-2146233088  
    (01) 2014-04-10 11:51:44 Slp: Parameter 4 :
    System.ComponentModel.Win32Exception@-2147467259  
    (01) 2014-04-10 11:51:44 Slp: Parameter 5 :   RunRemoteDiscoveryAction
    (01) 2014-04-10 11:51:44 Slp: Parameter 8 : 1300
    (01) 2014-04-10 11:51:44 Slp:
     Final Parameter Values
    (01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server  
    2012@RTM@KB2931078
    (01) 2014-04-10 11:51:44 Slp: Parameter 1 : 0x6785B09D
    (01) 2014-04-10 11:51:44 Slp: Parameter 2 : 0xB2652E58
    (01) 2014-04-10 11:51:44 Slp: Parameter 3 : 0x74E34741
    (01) 2014-04-10 11:51:44 Slp: Parameter 4 : 0xDC80C325
    (01) 2014-04-10 11:51:44 Slp: Parameter 5 :   RunRemoteDiscoveryAction
    (01) 2014-04-10 11:51:44 Slp: Parameter 8 : 0xA05EFA62
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Microsoft SQL  
    Server.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Uninstall to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL   Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft  
    SQL Server.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Uninstall to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL   Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:46 Slp: Failed to retrieve data for   this request.
    (01) 2014-04-10 11:51:46 Slp: Watson bucket for exception   based failure has been created
    (01) 2014-04-10 11:51:46 Slp: Sco: Attempting to create   base registry key HKEY_LOCAL_MACHINE, machine
    (01) 2014-04-10 11:51:46 Slp: Sco: Attempting to open   registry subkey Software\Microsoft\Microsoft SQL Server\110
    (01) 2014-04-10 11:51:46 Slp: Sco: Attempting to get   registry value EnableErrorReporting
    (01) 2014-04-10 11:51:46 Slp: WER: Successfully read app   consent from registry Software\Microsoft\Microsoft SQL   Server\110\EnableErrorReporting=0.
    (01) 2014-04-10 11:51:46 Slp: WER: Application level   consent value '0' was mapped to consent status 'WerConsentDenied'
    (01) 2014-04-10 11:51:46 Slp: WER: Result of the   submission:: 'WerDisabled'
    (01) 2014-04-10 11:51:46 Slp: WER: Submitted 1 of 1   failures to the Watson data repository
    (01) 2014-04-10 11:51:46 Slp: Sco: File   'C:\Windows\system32\Cluster.exe' does not exist
    (01) 2014-04-10 11:51:46 Slp: Failed to collect cluster   logs, cannot find Cluster.exe under system directory.
    (01) 2014-04-10 11:51:46 Slp: Dumping final cluster state.
    (01) 2014-04-10 11:51:49 Slp: Completed dumping final   cluster state.
    (01) 2014-04-10 11:51:51 Slp:
    (01) 2014-04-10 11:51:51 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:51 Slp:
    (01)   2014-04-10 11:51:51 Slp: Error result: -2146233088
    (01)   2014-04-10 11:51:51 Slp: Result facility code: 19
    (01)   2014-04-10 11:51:51 Slp: Result error code: 5376
    (01)   2014-04-10 11:51:51 Slp: SQM Service: Sqm does not have active session.

    Hello SQL Ranger,
    Thanks for posting the detailed log. I dont have exact solution for this but I can give you some hint what could be reason patch has failed below message points to fact that there is some issue with account which is used to install CU patch.Have alook at
    below log.It says that when patch was trying to get details from other node in cluster it was not able to.
    01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
    (01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
    (01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
    (01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
    IMO I strongly feel it is issue with the account. Microsoft has also documented about this for SQL Server 2008 .Have a look at following links
    http://support.microsoft.com/default.aspx?scid=kb;en-US;2000257
    Please also assign privilege mentioned in below link
    http://www.bradg.co.za/?p=12
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Anyone written functional specs for reports?

    Please explain how to write functional specs for reports in sales? How is it done? I need to be able to speak clearly in the interview so help is greatly appreciated.
    Thank you.

    Hi Haken,
    Basically functional spec contains the functionality to be implemented.
    http://www.saptechies.com/what-are-functional-specifications/
    Suppose you need to write a spec for Treausry report.
    Then you will write the following things( this is only for your understanding)
    Treasury Report u2013 Receipts & Payments.
    1.Business Requirement Study:
    The Treasury Department of the Corporate Finance Division needs various information for reporting and planning. The proposed requirement would provide information in the form of movements in a number of selected GL Codes involving Customer and Vendor Reconciliation Accounts and Inter-Bank transactions.
    1.1
    Enhancement Title:Treasury Report u2013 Receipts & Payments
    Enhancement Type: Report
    Enhancement Number: 1245m
    SAP Application Module:FI
    Priority (H, M, L):     M     Related Documents:
    1.2
    End User Name(s): XYZ
    Business Process Advisor:     YZX
    Functional Designer: Vivek Baddula
    1.3 Risk Assessment
    This section will address the risk of pursuing the system development. Any unknowns such as new technology and critical dependencies should be discussed in this section.
    1.4  Alternatives
    If there are more than one alternative to handle the business requirement, this section should list such alternatives and the issues that may arise from implementing them. Nevertheless, the optimum alternative discussed in the design overview will be used
    1.5Estimated Budget in Man-Hours
    STAGE     MAN-HOURS
    Design     0.00
    Build     0.00
    Test/Release     0.00
    TOTAL     0.00
    2.Selection screen fields.
    BUKRS           Company Code       parameter         Mandatory
    GJAHR            Fiscal Year            select options   Mandatory
    BELNR            Document Number select options
    SHKZG            Debit/Credit ind       parameter
    DMBTR            Amt.in loc.cur.        parameter
    3.Retrieval Logic:
    Put the selection parameters in table u2018BSEGu2019 and retrieve the following details.
    BUKRS                             Company Code
    GJAHR                             Fiscal Year
    BELNR                             Document Number
    SHKZG                             Debit/Credit ind
    DMBTR                             Amt.in loc.cur.
    WRBTR                            Amount
    PSWSL                             General ledger currency
    HKONT                             G/L Account
    3.1.     Total DMBTR of all BELNR by group and by SHKZG as H and show under the Debit Column of respective groups (Customer/Vendor/Inter-Bank).
    3.2.     Total DMBTR of all BELNR by group and by SHKZG as S and show under the Credit Column of respective groups (Customer/Vendor/Inter-Bank).
    3.4.     Similarly consider only those documents which have a PSWSL ne INR and show them under different group and SHKZG.
    4..     Output Display::
    Here we mention the format of the output and the fields need to be displayed.
    This is just a sample prototype ...
    Hope this will help you...
    Regards,
    Viveks

  • Data for Report Painter report

    Hi Gurus,
    I have a report painter report S_ALR_87013019 . This uses the
    Library 602 (gr23), report - 60BU-001 (GRR3).
    Need to create a regular report based on this, Can you Please tell from which tables the values are getting retrieved by this report painter report, or in general on how to trace back the tables used by the report painter.
    Also if it uses Set ID as inputs for fetching data, is there a way to get the setid/setclass value.
    Thanks,
    Regards,
    Raman

    Hi
    The As on Date balance cant be cumulated...
    Eg; you bought inventory worth 10 million in Current year and as of now you have 4 million worth of inventory in stock
    Cumulated bal in this case is 10 mil and As on Date balance is 4 million... 4 million is what you will get in SAP reports
    The same Key figure which shows values in comp code currency can be used
    br, Ajay M

  • Retrieving data/Opening reports too slow

    Hi Experts,
    We have a Finance Application with 12 dimensions. Two of those dimension holds a lot of members Product has 16,000 members with 7 hierarchies and the customer dimension has 40,000 members with 3 hierarchies. On the first part of our development we haven't encountered any trouble opening reports specially for a template which expands for almost 9,000 rows of members. After uploading 3 months of data with almost 400,000 lines each. We are now having trouble opening reports or even retrieving the data using ADHOC reports.
    We've already tried various performance tuning and still there are no improvement. We also deleted the uploaded data to see if it's causing the low performance but still the performance is still the same. Any suggestion what's causing this?
    By the way we're currently using BPC 7.0 MS SP03. We're using a single server setup. Server Memory is 10GB and Hardisk free space is 100GB
    Thanks,
    Marvin

    Hi Sorin,
    Sorry I forgot to mention that I've already tried removing other hierarchies leaving only two hierarchies to test if there is an improvement in performance but its still the same. And also other application which are far less complicated than Finance application and do not share the Product and Customer dimension are experiencing slow retrieval of data in reports. And yes, I build those hierarchies for reporting reasons, actually my first option really is to use properties but the clients requirement is for them to be able to drill-down each groupings that's why we've set them up as hierarchies.
    We've already tried creating partitions but still there's only a slight improvement in performance.
    As for the reports, we just created simple EVDRE to test if the design of the report is causing it but even a simple EVDRE hangs.
    Thanks,
    Marvin

  • ADS com.adobe.ProcessingException : Could not retrieve credential for alias

    Hi,
    I have configured ADS in NW730 EP system which is connected to ECC 6.0 system.
    When i perform the configuration tests in SA38 as per note 944221 ,
    i get the following error when executing FP_TEST_IA_01
    ADS com.adobe.ProcessingException : Could not retrieve credential for alias : ReadersRights(200.101)
    I have installed the credentials in the \usr\sap\<SID>\SYS\global\AdobeDocumentServices\TrustManagerService\trust\credentials
    Please help me with the situation

    Hi Florian,
    In my case the NW is 731. In NWA / Configuration / Infrastructure / Adobe Document Services / Documento Security, I put the pfx file through Manage P12 files... After this I added ReaderRights Alias and password that SAP sent me with pfx file.
    But after configured this alert message appear:
    "Could not retrieve the expiry date of the selected credential. This means that either the entered password is incorrect, or no JCE (unrestricted version) installation is available. See SAP note 1294782 for further details"
    I think that this is my problem. I think that because this message that FP_TEST_IA_01 report doesn't run. I've already updated JCE files and password is correct because SAP sent me.
    Regards,
    Alexandre

  • An error occurred while retrieving policy for this computer (0x80070057).

    Folks,
    I'm getting the following error just as the Task Sequence stage is about to begin.
    Failed to run Task Sequence
    An error occurred while retrieving policy for this computer  (0x80070057). For more information, please contact your system administrator or helpdesk operator. TSPxe 28/07/2011 14:16:23 1316 (0x0524)
    This an extract from my smsts.log file.
    <![LOG[Hardware ID: 2:86B07763A112416892822220E672F3730B883A12]LOG]!><time="14:16:23.478+-60" date="07-28-2011" component="TSPxe" context="" type="1" thread="1360" file="tspolicy.cpp:347">
    <![LOG[Preparing the Client DDR Message]LOG]!><time="14:16:23.493+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1360" file="tspolicy.cpp:399">
    <![LOG[Sending the Client DDR message.]LOG]!><time="14:16:23.493+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1360" file="tspolicy.cpp:493">
    <![LOG[Sending Report]LOG]!><time="14:16:23.493+-60" date="07-28-2011" component="TSPxe" context="" type="1" thread="1360" file="libsmsmessaging.cpp:5795">
    <![LOG[<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:76ee644d-dc21-430e-ad60-077b15a03312</ClientID><ClientVersion>4.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
    Data</ReportContent><ReportType>Full</ReportType><Date>20110728131623.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryActionLastUpdateTime>20110728131623.000000+000</InventoryActionLastUpdateTime></InventoryAction>
     </ReportHeader>
     <ReportBody><Instance ParentClass="CCM_ClientIdentificationInformation" Class="CCM_ClientIdentificationInformation" Namespace="root\ccm" Content="New"><CCM_ClientIdentificationInformation><HardwareID1>2:86B07763A112416892822220E672F3730B883A12</HardwareID1></CCM_ClientIdentificationInformation></Instance><Instance
    ParentClass="Win32_NetworkAdapterConfiguration" Class="Win32_NetworkAdapterConfiguration" Namespace="root\cimv2" Content="New"><Win32_NetworkAdapterConfiguration><MACAddress>F4:CE:46:AD:27:F8</MACAddress></Win32_NetworkAdapterConfiguration></Instance><Instance
    ParentClass="Win32_ComputerSystemProduct" Class="Win32_ComputerSystemProduct" Namespace="root\cimv2" Content="New"><Win32_ComputerSystemProduct><UUID>FA9C8185-E90C-11DE-A736-A09247038025</UUID></Win32_ComputerSystemProduct></Instance></ReportBody>
    </Report>
    ]LOG]!><time="14:16:23.493+-60" date="07-28-2011" component="TSPxe" context="" type="1" thread="1360" file="libsmsmessaging.cpp:5796">
    <![LOG[pCertContext, HRESULT=80070057 (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,815)]LOG]!><time="14:16:23.493+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1360" file="libsmsmessaging.cpp:815">
    <![LOG[CreateAuthHeaderParts( m_sClientID, pCert, sClientIdSignature, sTimestamp, sTimestampSignature), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,1770)]LOG]!><time="14:16:23.493+-60" date="07-28-2011" component="TSPxe"
    context="" type="0" thread="1360" file="libsmsmessaging.cpp:1770">
    <![LOG[Send (pReply, nReplySize), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,2052)]LOG]!><time="14:16:23.493+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1360" file="libsmsmessaging.cpp:2052">
    <![LOG[failed to send the request]LOG]!><time="14:16:23.493+-60" date="07-28-2011" component="TSPxe" context="" type="3" thread="1360" file="libsmsmessaging.cpp:2052">
    <![LOG[DoRequest (sReply, false), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,5842)]LOG]!><time="14:16:23.493+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1360" file="libsmsmessaging.cpp:5842">
    <![LOG[SendReport (L"mp:[http]MP_DdrEndpoint", L"MP_DdrEndpoint", L"{00000000-0000-0000-0000-000000000003}", 0, true, sReportBody.c_str()), HRESULT=80070057
    (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,6236)]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1360" file="libsmsmessaging.cpp:6236">
    <![LOG[oClientDDR.SendDDR(), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\tscore\tspolicy.cpp,494)]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1360" file="tspolicy.cpp:494">
    <![LOG[Failed to send DDR (0x80070057)]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="3" thread="1360" file="tspolicy.cpp:494">
    <![LOG[SendDDR (&m_oHttpTransport, m_sSiteCode.c_str(), sMediaGuid.c_str(), m_sClientIdentity), HRESULT=80070057
    (e:\nts_sms_fre\sms\framework\tscore\tspolicy.cpp,845)]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1360" file="tspolicy.cpp:845">
    <![LOG[failed to send the DDR (0x80070057)]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="3" thread="1360" file="tspolicy.cpp:845">
    <![LOG[m_pPolicyManager->init( sMP, ulMpPort, sSiteCode, lstrcmpW(sUseSSL.c_str(),L"true")==0, lstrcmpW(sUseCRL.c_str(),L"true")==0, L"", sMediaPfx, sMediaGuid, sEnterpriseCert, sServerCerts, sSiteSigningCert, sAuthenticator), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,941)]LOG]!><time="14:16:23.509+-60"
    date="07-28-2011" component="TSPxe" context="" type="0" thread="1360" file="tsmediawizardcontrol.cpp:941">
    <![LOG[Exiting TSMediaWizardControl::GetPolicy.]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1360" file="tsmediawizardcontrol.cpp:1108">
    <![LOG[pWelcomePage->m_pTSMediaWizardControl->GetPolicy(), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawelcomepage.cpp,280)]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0"
    thread="1360" file="tsmediawelcomepage.cpp:280">
    <![LOG[Setting wizard error: An error occurred while retrieving policy for this computer  (0x80070057). For more information, please contact your system administrator or helpdesk operator.]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe"
    context="" type="0" thread="1316" file="tsmediawizardcontrol.cpp:1233">
    <![LOG[WelcomePage::OnWizardNext()]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1316" file="tsmediawelcomepage.cpp:314">
    <![LOG[Skipping Confirmation Page.]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1316" file="tsmediaconfirmationpage.cpp:169">
    <![LOG[Skipping Task Sequence Selection Page.]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1316" file="tsmediataskselectionpage.cpp:118">
    <![LOG[Skipping Variables Selection Page.]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1316" file="tsmediavariablesselectionpage.cpp:155">
    <![LOG[Skipping Resolve Progress Page.]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1316" file="tsmediaresolveprogresspage.cpp:96">
    <![LOG[Activating Finish Page.]LOG]!><time="14:16:23.509+-60" date="07-28-2011" component="TSPxe" context="" type="0" thread="1316" file="tsmediafinishpage.cpp:106">
    The client is able to connect with IIS on my proxy MP (IIS log extract below).
    2011-07-28 14:18:10 172.26.75.162 CCM_POST /ccm_system/request - 80 - 172.27.102.40 OSD+Client 200 0 0 31
    2011-07-28 14:18:10 172.26.75.162 CCM_POST /ccm_system/request - 80 - 172.27.102.40 OSD+Client 200 0 0 234
    I would appreciate any assitance you guys can offer on this.
    Micmaher

    Hi!  I know this is old stuff but happened to me today!  so I post my fix here in case anyone gets the same error:
    PXE boots, but after you enter the password
    to get the list of task sequences, you get this error and the PC reboots:
    "80070057 pxe error retrieving policy" or something similar.
    If you press F8, you can see the log in X:\Windows\Temp\SMSTsLog.
     If you read the log, you will find the error as:
    “failed to send ddr”.
    This has to do with PXE Certificate.  In this case,
    the certificate was expired, so I had to change the date of expiration.  This is done in the properties of the PXE service point at the SCCM Server.
    Regards,
    Jose Angel Rivera
    Awesome, this worked for me. Thanks a bunch!

  • Data retrieval failed for the subreport

    Hi All,
    I m getting this error whn i try to bind a sub report within a report,
    Data retrieval failed for the subreport, 'Subreport2', located at: E:\Anil\Sample.rdlc. Please check the log files for more information.
    Thanks,
    Anil Kumar Dhiman

    Hi Anil,
    This is a know issue which you can see in the link:https://connect.microsoft.com/SQLServer/feedback/details/648560/subreport-with-shared-dataset-throws-error
    This issue occurs only on Business Integrated Development Studio (BIDS) and use a shared dataset in subreport. And it is fixed in SQL Server Reporting Services 2012. So you can avoid this issue by changing the shared dataset to embedded dataset or deploy the
    shared dataset to Report Server and view report on Report Manage.
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    TechNet Community Support

  • User-exit for report RPCAIDP0 (tcode: PC00_M19_CAID)

    Dear Gurus,
    Does anyone know user-exits for report RPCAIDP0 (tcode: PC00_M19_CAID) ?
    Thank you in advance,
    PSC

    Depends on what you want to do Priscilla, i have quite an experience with RPCAIDP0 report and it's not the easiest report to change the standard without copying to an customer report. Also, in the previous year, SAP changed the logic of the report quite a bit in order to have the same logic as in RPCIIDP0, so they created a class (CL_HR_PT_EMPLOYEE_TAX_DATA) in which they encapsulated all the data retrieval regarding payroll results, so it's not that dificult to enhance the class itself but it's a bit dificult to get the logic right away. I have done this for several clients, so if you can be more specific maybe i can help you.
    Best regards.

  • Number of rows which can be retrieved in Discoverer Report

    Hi All,
    Is there any maximum limit on the number of rows which can be retrieved in Discoverer Report.
    Regards,
    Ankur

    Hi ankur,
    Rows for tables are fetched from the database incrementally in groups. The number of rows in each group is specified in the Options dialog box based on the value set in the option "Retrieve data incrementally in groups of." Click the Query Governor tab on the Options dialog box to see that option.
    To override that setting you can retrieve all the rows at once instead of incrementally. Retrieving all rows applies only to tabular style reports.
    * To retrieve all the rows at once instead of incrementally, choose
    Sheet | Retrieve All Rows. The table includes all the rows.
    * To count the number of rows choose Sheet | Count All Rows.
    I think there would be some maximum limit,do check it out.
    By,
    Kranthi.

  • Memory full & request could not be submitted to process for Reports

    Hi.
    I am encountering crystal report error. I have a database that store around 19k records some with and without pictures.
    I am a newbie and I customized my own report. When trying to generate report for the whole database, the pictures does not appear. However, when I try to generate report with lesser records, the pictures do appear. It seems to be the picture size that may affect this. But I cannot imagine myself going to each and every record to resize the image file. May I know if it is possible to resize all the image file size at one go using SQL?
    FYI, I'm using Crystal Report XI R2 ver 11.5.12.1838 and 64 bit windows 7.
    Also, I opened the report through another software which is in 32 bit mode.
    On top of that, I have difficulty saving the report or printing the report to PDF. Whenever I print to PDF, it print several pages and then it keeps saying memory full or this request could not be submitted for processing. As it is urgent for me to come up with this report, what I've been doing is to print the report in many PDF files and then combine all into one PDF which is super time-consuming. Please help. Thank You.
    PY

    Hi Teo
    This appears to be a report design issue in CR XI R2 (e.g.; it does not work there - worry about runtime later...). Now there are a few things to consider;
    1) CR XI R2 is out of support so you can not create a support incident. In order for you to be able to do that, you'd have to upgrade to CR 2013. Eval of 2013 is here:
    SME Free Trials | SME Software | SAP
    Phone incidents can be created here:
    Crystal Single Case Technical Support - SAP Business Objects US Online Store | SAP Online Store
    2) CR is not a good archiving or graphics utility. E.g.; I am not sure how many pictures / records you are retrieving when the report fails, but see the following:
    KBA: 1964141 - Supported image format in Crystal Reports
    Error resizing images in CR2008 "background processing"
    3) It's never a good idea to create a report in version Y of CR and then try to run that report in a .NET app that is using runtime of version Y - z (at minimum be on the same version both in the app and the designer.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • (Request for reporting available) is not coming in Cube

    Hi All,
    I have Cube & DSO.
    I  added fields in DSO & Cube.
    Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
    thanks in advance,
    Kiran.

    Hi ....
    Have you done the Roll up ?
    Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
    Regards,
    Debjani....

Maybe you are looking for