Retrieving the organizational unit information

Dear all,
I need to review the organizational unit set up within the org.-structure on PPOSE.
Therefore, I would appreciate if you could provide me with a Report/table, where
I can receive informationu2019s about the time, when each organizational unit were used
at last time.
Thanks
Kam.

Hi Steve,
thanks for your feedback.
The major issue is currently with a stand alone organizational units within the PPOSE which doesn't have any relationship. i.e. there is an object ID in the table "HRP1000" which hasn't have any entry in the table "HRP1001". Can I assume that this object ID hasn't been used by any one at all?
Awaiting your feedback.
Thanks
Kam.

Similar Messages

I need a list of all the organizational units, sub organizational units,

I need a list of all the organizational units, sub organizational
units,and their security groups which are present in all sub OUs

Hi,
There are lots of way to export OU, Sub OU and Security Group.
1> Open AD console > run query > export with CSV file.
2> Run “CSVD” command as per your requirement.
3>Download Manage Engine Software > Install to any computer of Domain member > Set credential for domain controller access > Export the customized information, as per your requirement with XLS, PDF,
CSV or Ect.
3rd option is very easy to export customized reports
Deepak Kotian.
MCP, MCTS, MCITP Exchange 2010 Ent. Administrator
Disclaimer:
Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognizes useful contributions. Thanks!
All the opinions expressed here is mine. This posting is provided "AS IS"
with no warranties or guarantees and confers no right

Getting the organization unit of a responsibility used ...

Hi,
Are there any manners to get the organization unit according to the responsility the user selected...????
For example...
Assume that the user has the following responsibility:
inventory employee <-----------role as a single inv. employee(access only to view)
admin of inventory N234 <-----------role as an admin to this particular inventory(access to view, edit, check, ...)
admin of inventory N239 <-----------role as an admin to this particular inventory(access to view, edit, check, ...)
e.t.c..
How is it possible to correlate the responsibilities 2,3 (of the above list) to the organization units(units of a company) coded as 234, 239 respectively..???
I assume that this can be done using a profile (at responsibility level and/or user level)...In this case is there any profile name i can use..or i should create a new one...??? ----{I use the MO:Organization Unit to get the business group id/company}.
Is it possible to acheive the above through the use of a form parameter...(but the question is how to correlate the specific to an organization unit responsibility to a code representing this unit (inventory N234) without the use of a profile - as a second manner)...???
Note: I use 11.5.10 EBS
Many thanks,
Sim

Hi Sim,
One thing you need to be carefull about is in what context you need the ID of a certain organizational unit. There are different types of orgs that are in play at different times.
e.g. Operating Unit is the securing attribute for many subledgers such as Order Management, Accounts Receivables/Payables, Purchasing.
Inventory Unit is relevant when you look at Inventory Transactions, Costing, Planning etc.
If we assume that you are only interested in INV orgs then whenever you enter a form that deals with inventory related issue the user is prompted to choose an organization and the choice results in setting the context variable MFG_ORGANIZATION for the session.
If you want to control which Inventory Organization a user or responsibility has access to you go to Inventory > Setup > Organizations > Organization Access. Here you can restrict access by Responsibility. Take a carefull look into the help text to understand implications - I have copied the first couple of paragraphs:
+You can specify which organizations a responsibility can access by mapping responsibilities to organizations. Once this mapping is set up, a user logging into an Oracle Manufacturing product is restricted to the organizations mapped to the responsibility chosen. The Change Organization window is restricted as well.
Attention: Until you assign an organization to a responsibility in this window, all responsibilities have access to all organizations. Once you have restricted any responsibility to an organization, you must then explicitly define the organizations which all responsibilities can access.
Attention: This feature does not restrict access once the user is in the product. Users with access to functions that cross multiple organizations (such as ATP, Inter-organization Transfers, Item Search, Multi-organization Quantity Report, and so on) can still specify any valid organization when running these functions.+
/Niels LM

How to retrieve the Foreign key information in Oracle

I want to know how to retrieve the Foreign Key information in Oracle while using SQL Statement?
I have use three SQL statement to retrieve such information, but the performance is very bad.
The three SQL Statements are:
Select constraint_name, r_constraint_name from all_constraints where constraint_type = 'R' and table_name = table1;
Select column_name from all_cons_columns where constraint_name = cons1;
Select table_name, column_name from all_cons_columns where constraint_name = r_ccons1;
Do anyone know another method to retrieve the Foreign Key information which has better performance?

These sql-statements don't seem very performance intensive. My guess is something is wrong with your database (unless you have millions of constraints). How many constraints do you have? how many concurrent users? What is your dictionary cach hitratio? (other hitratio?) memory problems? other tasks of the computer? is this query the only one being slow? etc.

Send IDocs to machines depending of the Organizational Units.

hello,
I want to know if there is a way to send IDocs to a determain machine depending of the organizational Unit or their sub-tree objects.
Imagine, I have 10 organizational Units (10 countries), and I want to send to each country without sending the modification to the rest os the other countries.
I there a way I can do it?
Thank yu very much in advance...
PM

Hi David,
This can be done in the Mapping.. For this Java Mapping will be easier.
First you need to read input xml document, and search for the Geography/Region.. And then gorup the similar one into the list etc..
After this Mapping, you will be having one message for each Geography . For this you required to use BPM and in the BPM you can split the messages(1:N) mapping.. But it is still based on the target Structure. If you have many geographies, then it is not an idle solution..
If you want to make your scenario as an Independent, then you can go with some workaround solutions like this. Output all the files into one folder in XI. And from XI execute an Shell Script, which will read the data and tarnsfer into required Geograhy/Person etc.
So in this case XI part is almost independent. Only you need to maintain the SHell script..
This is just my views
Use SAX parser for the Java Mapping here..about Java mapping
Java Mapping
Java Mappings for XI
Mark helpful answers
Hope this helps,
Regards,
Moorthy

How to get the Organization Units

Hello,
I have set up a LDAP server with JNDI Tutorial example. I have been able to search, list and also get the attributes from the server. But what i need to know is there a way to get the Organization Units in java.
ie. o = JNDITutorial
ou = People
ou=Groups
ou=NewHires
Now what i want is there a way to get all the ou's in java for the given organization.
Any help would be greatly appreciated.

Mahmed
I would strongly say you need to refer the Workforce and Management guide
Which will explain you the complete details of the Organization
You need to get the basics for this because these BG and OU are going to be the foundation for the instance. So just by know the definition will not help you
Thanks
Regards
Ramesh Kumar S

Learning Maps-Capture the Organizational Unit of the end user feedback

Can anyone help me on this:
Problem: The requirement is to track the enduser feedback from Learning Maps to get information of an organizational unit.
As per documentation LearningMap feedback is anonymous.
I would like to know whether there is any BADI or user exits available to solve the problem?
Message was edited by:
Ramesh Ramanathan

Hi,
Have you maintained your Organizational data? Did you assign any job to any user in the organizational hierarchy. You need to maintain you PPOMA_CRM first in order to assign any roles there.
Hope this helps
Rajeev

How to get the Organizational Unit One level up

Hi
Does any one know any function module to get the org unit one level up by giving the current Organizational unit as input. Please reply very urgent.

Hello Nirmal
I am usually using the following function module to read to OM:
* SAP_SORG
* OrgStructure with assigned orgunits)
 REFRESH: lt_struc.
 CALL FUNCTION 'RHPH_STRUCTURE_READ'
 EXPORTING
 plvar = '01' " active Planvar.
 otype = 'O' " OrgUnit
 objid = l_wa_cb1-objid " Toplevel-Node
 wegid = 'SAP_SORG'
 begda = iw_begda
 endda = iw_endda
 pup_info = 'X'
 with_stext = 'X'
 tdepth = 0 " alle Sub-Levels
 TABLES
 stru_tab = lt_struc
 EXCEPTIONS
 catalogue_problem = 1
 root_not_found = 2
 wegid_not_found = 3.
The parameter WEGID is the crucial on which determines the objects that are read from the OM. In your case you will need WEGID = 'A002' (reports (line) to).
To understand the evaluation path (WEGID) better have a look at transaction PPST.
Regards
Uwe

Locate the organizational unit !

hi all!
I am trying to assign my ZPROFILE(The ICWC profile) to my organizational unit.
now the problem is i do not know that is my org unit.is there a way by which i can figure it out.
any help wud be greatly appreciated.
thanks
sachin

Hi Steve,
thanks for your feedback.
The major issue is currently with a stand alone organizational units within the PPOSE which doesn't have any relationship. i.e. there is an object ID in the table "HRP1000" which hasn't have any entry in the table "HRP1001". Can I assume that this object ID hasn't been used by any one at all?
Awaiting your feedback.
Thanks
Kam.

How to get employee no(pernr) based on the organizational unit

HI,
I am using LDB PNP in my program nd have used my own report category with Organizational unit,begin date and end date in the selection screen.
Now I have to get all the active employee of that organizational unit.so tell me how to get this
Explain about GET and PROVIDE statement
Regards,
Kiruthi

Hi !
To get active employees reject separated employees ( action )
i.g
******Data fetch*****
start-of-selection.
get pernr.
if pernr-massn eq '14'.
reject.
else.
it_active-sapid = pernr-pernr.
endif.
ORGEH : Organizational Unit
ORGTX: Organization unit text
********Organization*************
*data text type char30.
SELECT SINGLE ORGEH from pa0001 into IT_ACTIVE-ORGEH where PERNR = IT_ACTIVE-SAPID.
SELECT SINGLE ORGTX from t527x into IT_ACTIVE-ORGTX where ORGEH = IT_ACTIVE-ORGEH and SPRSL = 'EN' .
if sy-subrc eq 0.
write: 160 sy-vline, IT_ACTIVE-ORGTX.
else.
clear: IT_ACTIVE-ORGTX.
write: 160 sy-vline, IT_ACTIVE-ORGTX.
endif.
**************Organizational ID ******************
select single ORGEH from pa0001 into it_active-Org where pernr = it_active-sapid and begda le pn-endda and endda eq '99991231' .
if sy-subrc eq 0.
write: 180 sy-vline, it_active-org .
else.
clear: it_active-org .
select single ORGEH from pa0001 into it_active-org where pernr = it_active-sapid and endda EQ '99991231' .
write: 180 sy-vline, it_active-org.
endif.
Regards
Sheetal

How to determine the organizational unit using activity category ????????

Hello All
We are working on CRM 7.0 , we need to have the organizational determination based on the activity category , I have put the activity category in the attribute list then I created a determination rule type responsibility and it is working fine in the simulation but after I assigned the determination rule to the transaction type the organizational unity could not be determined. I tried the BADI CRM_ORGMAN_BADI but it was not help.
Any clues regarding this issue ?
Regards
Jacopo

No answers

HR ABAP: How to get the organizational unit for the penr as chief

Hi ,
I am new to HR ABAP. Could any one specify if we have a PERNR how we can get the possible values for Orga units,positions and the personal areas that this PERNR as chief.
Thanks in advance,

Hi,
<li>Check the table PA0001 which contains Org unit(ORGEH), Position(PLANS), Personal Area(WERKS) assigned to PERNR.
<li>Use SELECT query to get those if you don't use Logical database PNP.
Thanks
Venkat.O

No Organizational Unit for Bidder on the 'Manage Business Partners Screen'

I replicated a vendor from R3 to SRM and there is no 'Organizational Unit for Bidder' listed. Because there is none, I cannot make any changes to the address of the Business Partner (Vendor) and there is no way to add the Organizational Unit for Bidder because it is all greyed out.
I also tried to fix it in the GUI bbmainint screen but it cannot be fixed there either.
Does anyone know how I can get that Org Unit for Bidder into the Vendor's Profile? I know what it should be, I just can't find a way to get it in there.
Thanks,
Laetitia

Hi,
the 'Organizational Unit for Bidder' is not listed in the transaction. You need to know this code every time you create a contact / employee for a specific suppliers.
When you replicated vendors into SRM, the vendor records are assiged to a Org Unit. Depending on your SRM version (SRM 4.0 or SRM > 4.0), they are integrated into the Org Model. Enter exactly this root node for the supplier into the field 'Organizational Unit for Bidder'.
It is just about knowing where the information is - then it works
Cheers,
Claudia

Have to diplay all the active employees in an Organizational unit n HR ABAP

HI,
I am new to HR ABAP.
In my selection screen I have to get the Organizational unit from the user and based on that organizational unit value i have to display the details like pernr,fname and other fields of all the active employee in that OU.
I have to use logical database in the program .
so it would be helpful if anyone of you can give some idea or send some sample programs or materials for reference.
Regards,
Kiruthi

HI,
I am new to HR ABAP.
In my selection screen I have to get the Organizational unit from the user and based on that organizational unit value i have to display the details like pernr,fname and other fields of all the active employee in that OU.
I have to use logical database in the program .
so it would be helpful if anyone of you can give some idea or send some sample programs or materials for reference.
Regards,
Kiruthi

Not able to Assign Organizational Units to the Sites

Hi all,
while configuring intercompany billing I am not able to assign the Organizational Units to the Sites.
I am in retail system and maybe here I have to do something else before seting up the intercompany?
Thanks in advance
L

Hi,
Go through the Building block and their prerequisites
http://help.sap.com/bp_bblibrary/600/html/R01_EN_DE.htm
http://help.sap.com/bp_bblibrary/600/html/R41_EN_DE.htm
Thanks
Chidambaram

Retrieving the organizational unit information

Similar Messages

Maybe you are looking for