Retrieving value of a Hierarchy Node Varaible in Web Template

Could somebody tell me, is it possible to retrieve the value of a variable when the characteristic is in free characteristics,
if possible how to Retrieve value of a Hierarchy Node Varaible.
-Shashi

Hi Kim,
you can use command for expand/collapse hierarchy nodes "SET_DRILL_STATE" for your DataProvider together with the print command "EXPORT". For a button group webitem you can build a command sequence in WAD.
SET_DRILL_STATE
http://help.sap.com/saphelp_nw04s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Export Web Application
http://help.sap.com/saphelp_nw04s/helpdata/en/44/85de4943af5919e10000000a1553f7/frameset.htm
Regards
Andreas

Similar Messages

  • Allow user to type in the Hierarchy node value in Hierarchy node varaible

    Hi Experts,
    We are presently on NW2004s SP8 and we are moving on to SP10.
    We got the requirement in reporting...
    1.To allow the user to type in the Hierarchy node value in Hierarchy node variable manually.
    2. When user typing the Hierarchy node value into the Variable prompt, bring subtree by default.
    By default Hierarchy node variable prompt is grayed out and the user can only select the values from Input help(F4).
    I have put forward an SAP message on this topic earlier and got a reply that the manual entry of hierarchy node is not possible and there is no work around. User needs to select it from HELP. This is because the node value must be in a certain format which the users may not know.
    I just want to know from u Experts... is there any new feature available in SP09/10 or is there any other way to satisfy this requirement ?
    Thanks in Advance.
    Regards,
    Aparna

    We are able to manually enter in a hierarchy node in the selection screen.  The selection screen is not grayed out. 
    We are currently on SPS 009, but one difference could be that we are on a Bex 3.5 Patch 10 front end.

  • How to calculate values on Hierarchy node level in WEBI

    Hi Experts
    I have a BI Query ,which have GL account Hierarchy(FSV) Drill down like
    Revenue                            213.15
    Operating Expense       28.49
    Revenue and Operating Expense are two node of the hierarchy ,similarly under these sub node and GL grouping is done in FSV(Hierarchy).
    I need to calculate Operating Expenses % and report look like
    Revenue                             213.15
    Operating Expense       28.49
    Operating Expenses %       13%
    i.e Operating Expences % = Operating Expences /  Revenue *100
    how It will done in Webi rich Client.
    Regards
    Abhi

    Hi,
    You need to work with your Business to understand how these calculations are formulated in their definition, and how they are qualified and quantified.  Next, you have to abstract that logic, and recreate it using the reporting interface of webintelligence.  context is everything.
    This is not something that can easily be explained over a text chat forum!!
    I'd encourage you to work with a colleague who can deliver such reports in BObj,  or,  give it a go yourself using trial and error.
    Regards,
    H

  • How to Create and External Hierarchy and group values of IO in node

    Good morning
    BI 7:
    Please give me guidance on the following?
    I need to either to restrict a characteristic in a query to more than 800 values OR exclude values where it contains the pattern 'Z7' and 'Z8'. There are thousands of values which contains the pattern and they are not listed in such a way that I can exclude them as a value range, thus I would have to include all the values I want into the restriction, which is more than 800. An error displays when I check the query:
    ""In the structural component Warranty Damage Code, characteristic ZWR_DMGC is restricted to 838 values. This number is very large and will probably meet with technical limitations""
    The proposed solution is:
    ""Create an external hierarchy for characteristic ZWR_DMGC and group the 838 values in a hierarchy node. You can then work with the node instead of the 838 individual values.
    Alternatively, you can define a corresponding navigation attribute for ZWR_DMGC""
    I know where to create the hierarchy, but I am confused how to only include the values of the applicable IO where pattern contains 'Z7' and 'Z8'.......??
    The following are some of the steps proposed in a related thread, but I am loosing it at step 7.
    5. Confirm your entries. The Maintain Hierarchy screen appears. You can define the structure of a hierarchy here. ok
    6. To create a hierarchy node, you first need to choose an insertion mode: Insert as First Child or Insert As Next Neighbor (see Hierarchy Editing Functions). I selected first child
    7. Choose the type of node you want to create: Text Node, Characteristic Node, <Hierarchy Basic Characteristic Node> or Interval (see Hierarchy Nodes) *this is where I am lost, which should I select to list values with pattern ' *Z7' and ' Z8' in a node or two
    8. Repeat this procedure until the hierarchy structure has been set. For more information, see Modeling Nodes and Leaves.
    A hierarchy can contain 50,000-100,000 leaves at most. If your hierarchy is larger, you should insert a level that is used as a navigation attribute or preferably as a separate characteristic in the dimension table.
    9. You can use Level Maintenance and Hierarchy Attributes to set how the hierarchy is to be displayed and processed in reporting (see Level Maintenance and Hierarchy Attributes).
    10. Save the hierarchy.
    Your assistance will be appreciated.

    Hierarchy not used in this case. Could not fnd an answer.

  • Filter value on hierarchy node in Business Explorer Analyser

    Hi experts,
    I'm facing an issue in BI 70 SP 10.
    I'm using Business Explorer release 3500.11.051.
    In a query, when I set a filter value on a hierarchy node, all the hierarchy is available and i can choose my node.
    Now, i want to change of filter value but only the previous selected node is available in the filter popup. I need to remove the filter value to choose a new one.
    Need your help.
    Jacques

    HI,
    The attribute is: Only Posted values for navigation.
    We didn' t change that and it worked in 3.0B
    Jacques

  • Issue with hierarchy node variable and multiple SAP hierarchies

    Hello experts,
    We are currently facing an issue when using two SAP hierarchies in Web Intelligence and one of them is restricted with a hierarchy node variable.
    The systems we use are a SAP BI 7.01 (SPS 05) and a Business Objects Enterprise XI R3.1 SP2 (fix pack 2.3). I want also to point out that the fix pack 2.3 has been applied to all BOE related components: the SAP integration Kit, client tools, and enterprise (server and client).
    The universe used in our scenario is based on a BEX Query with two hierarchies (non-time dependent hierarchies, intervals allowed) loaded on their corresponding characteristics. One of these characteristics is restricted with a hierarchy node variable (manual input, optional, ready for input, multiple single values allowed). 
    Prerequisites for replicating the problem:
    1)     When building the web intelligence query select several levels from both hierarchies (they have seven levels each) and    the   only amount of the InfoCube that the BEX query (that was used to create our universe) relies on.
    2)     In the hierarchy node variable prompt select a hierarchy node entry (not an actual InfoObject value that exists as transactional data in the InfoCube )
    By executing the query built above, all characteristics are returned null (no value) and the key figure with value u201C0u201D. No error messages, no partial results warnings.  Now if we go back to u201CEdit queryu201D and select levels of only one of any of the two hierarchies the query runs normally (by selecting the exact same value for the hierarchy node variable prompt).
    Any ideas on the matter?
    Regards,
    Giorgos

    Hi,
    Have you ever got a solution for this problem?
    I have a similar one.
    Thanks,
    regards, Heike

  • Hierarchy node not available in Query Designer

    Hello Gurus,
    I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
    Thanks,
    Mark

    Hi Mark,
    You said you "find the hierarchy node variable in BW but it is not available in query designer".
    How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
    For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
    Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
    Regards,
    Patricia

  • Restrciting the hierarchy nodes in the transformations

    Hi
    I have "0ACCOUNT'  InfoObject in ODS and it's hierarchy.
    And it(0ACCOUNT)  has some accounts(4001, 4002, 4003) and other  reamining other fileds values .
    I want to restrict the '0ACCOUNT' values for some hierarchy nodes . How can i do this one in transformations .
    pls let me knpw
    kumar

    Hi kumar,
    use this link
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a563fe09411d2acb90000e829fbfe/content.htm
    with hopes,
    Raja singh

  • Hierarchy Node Variable is not displaying full list of Hierarchy

    Hi,
    I loaded Hierarchy  to an info object using flat file.
    When i created a test reports and settings to display of MAster Data of Char and executed the report
    The output displays full list of Hierarchy
    Now to have a User Entry on Hierarchy ...created a Hierarchy Node variable and executed the value help of Hierarchy Node variable is not displaying fill list of Hierarchy ...its only displaying first 15 entries in Hierarchy.
    I changed the settings of variable...etc but couldn't get the Hierarchy full list in User entry selection
    How can i fix it...
    Thanks in advance

    If anyone has the same problem, I think I found the reason when transported to production.
    BW7.3 (at least) can not show the hierarchy nodes if there is no transactional data loaded.
    So do your hierarchies only after the data has been loaded..

  • Passing hierarchy node variable in a hyperlink

    Hi,
    We are on XI 3.1 SP3.
    We have a BW summary query with hierarchy active, with hierarchy node variable as "optional" selection variable. Created Universe based on the query and built a WebI report. Have activated "Drill". That way we are able to drill down per the levels. This works fine.
    We have another BW detail query with optional hierarchy node selection. Created a universe and a WebI report for the detail report..
    When we try to create a hyperlink from the summary WebI report to the detail WebI report in "display" mode, creation of Hyperlink is very intutive. We are able to pass parameters.and the hyperlink works fine.
    The only problem occurs when we try to pass the hierarchy node variable value. The value of the hierarchy node gets passed, but the report does not bring over any data,
    Is this a known bug? Is there a workaround.
    Kindly advice.
    Rgds

    Hello,
    Ingo, thanks for your comment Sorry for the delayed response.
    Let me explain my scenario. On my report I have the following:
    1. Sales Hierarchy (5 level hierarchy)
    2. Product Group (Hyperlink created - want to pass Sales Hierarchy node value + Product group to detail report)
    3. Key Figure 1
    4. Key Figure 2
    I have activated drill which allows me to drill down the Sales Hierarchy.
    Scenaio A.  Pass just the Product Group Key. Success
    If I just pass the  "Product Group Key", the detail report shows me the data for the specific Product Group as expected. This is a successful test
    Scenario B -  Pass the Sales Hierarchy Node key and the Product Group Key Fails
    In this case, I am passing the "Product Group key" along with the "L00 Sales Hierarchy key". When I click on the hyperlink, it gives me an empty detail report. I know for sure that values exist for all levels. If I run my detail report stand-alone, I am able to get values for all levels.
    However if I drill down to the last level in the Sales Hierarchy, the detail report shows correct value. For last level, the Sales Hierarchy Node value gets passed correctly along with the Product Group key.
    URL generated is as follows:
    http://<bobj server>:<port number>AnalyticalReporting/WebiView.do?bypassLatestInstance=true&cafWebSesInit=true&appKind=InfoView&service=/InfoViewApp/common/appService.do&loc=en&pvl=en&actId=216&objIds=6933&containerId=6923&bypassLatestInstance=true&lsMProductGroup=11101101&lsSGeoSales+Hierarchy=B01&isApplication=false&pref=maxOpageU%3D10%3BmaxOpageUt%3D200%3BmaxOpageC%3D10%3Btz%3DAmerica%2FDenver%3BmUnit%3Dinch%3BshowFilters%3Dtrue%3BsmtpFrom%3Dtrue%3BpromptForUnsavedData%3Dtrue%3B&sRefresh=N
    In the URL you can see that correct values are getting passed
    Product+Group=11101101
    Sales+Hierarchy=B01
    Do I need to append any value to the "B01" value ?
    I did not understand the part about appending [ ] or 0HIER.
    Can you please explain.
    Thnaks for all your help.
    Rgds

  • Displaying variable values in Web Template

    Hi,
    I am working on a Web Template.
    I want to display the variables and their values input by the user on the Web Template.
    Which Web Item function shd I use?
    How shd I use it?
    Pls guide me.
    Thank you,
    Adarsh

    Hi Adarsha.
    You can add the standard web item called "Text Elements". When you have added it just insert the dataprovider you want the filter values displayed for.
    Hope it helps.
    BR
    Stefan

  • How to pass a hierarchy node variable value over OpenDocument?

    Hello,
    I have been unable to link to an instance with matching parameters with opendocument with hierarchy node variables.
    Has anyone attempted this or been successful?
    Please reference this post I had in the Web Intelligence forum.  sInstance=Param not working for sap bw query based reports (FWM 02020)
    Here's some background information
    We've created 2 new crystal reports based of sap queries.
    Report 1, single prompt, no hierarchy.
    Result : Can link to specific instance with matching parameters. Great!
    Report 2, single prompt, hierarchy based.
    Result: Cannot link to specific instance with matching parameters
    Parameter list for report 2
    [!V000001} : Cost Center/Gr{oup (Multiple) = {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
    However when I go into the history and look at the successful instance parameters used, it seems to be picking up an extra parameter ( my guess is node)
    XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
    We have attempted to use the entire string, the first portion, second portion, and just the technical response. No luck.
    Any help or pointers would be appreciated!
    Nick

    Hello  Ingo,
    I'll explain the situation more clearly,
    Report 2, single prompt, hierarchy based.
    Result: Cannot link to specific instance with matching parameters with a response from the Bus Objects server
    An error has occurred: The object with ID -1 does not exist in the CMS or you don't have the right to access it (FWM 02020)
    We have 1 parameter for report 2
    {!V000001} : Cost Center/Group (Multiple)
    We selected a single value:
    {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
    (The XXX, XXX, & XXX is the description)
    We ran a successful instance.
    However when I go into the history and look at the successful instance parameters used it displays the following: 
    XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
    An extra description seems to appear (The first XXX, XXX & XXX;) Our original selection was only {0COSTCENTER   XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
    We attempted to build variations of the open document strings
    1. We tried the entire parameter response,
    XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
    2. The first description that was not part of the original selection,
    XXX, XXX & XXX
    3. The technical name and description
    {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
    4. The technical name
    {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE}
    Please let me know if you need more details.
    Regards,
    Nick

  • BW Hierarchy node Variable - Value help Issue in Crystal Report

    Dear All,
    1. We have created the BW-Query with Hierarchy node Variable .
    2. On the above query we have preapred Crystal Report.
    3. We have published the Crystal Report using BW Publisher ( Through Content Administrator in BW).
    4. Followed the steps as below link.
    http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsandBWquery+elements
    Problem:
    When we are accessing the Crystal Report in the InfoView BW-Hierarchy node variable is not appearing in the value help as a tree structure ( It is appearing as a list ).
    Please suggest me the solution.
    Thanks & Regards,
    Kiran Manyam.

    Classic Crystal Reports and Classic SAP connectivity questions
    Classic Crystal Reports and Classic SAP connectivity questions

  • Hierarchy node Variable: F4 Help - Not showing Master data values

    Hi,
    We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
    In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
    I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
    Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
    There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
    Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
    Thanks in advance for your help.
    Regards,
    Femmie.

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • How to pass hierarchy node value to another report using RRI

    hi,
    i want to pass hierarchy node value to another report but i can not able to do this using hierarchy variable so i want solution for this.
    Reply me as soon as possible its very argent.

    Did you wanted to jump from Node to Node ? I guess you cannot do that....did you try ?

Maybe you are looking for