Retrive Message ID from MESSAGE ARCHIVE in XI

Hello Experts,
Can any one tell me how to retrieve or get Message Id from Message Archive in xi. I have gone through the sdn about the Message Archive in xi. I can see the messages in Archive, but i want to get the message id.
So Kindly help me in this regard.
Thanks in advance..
Arjun

Hi
Just try at SXMB_MONI ->> MONITORING>
Archived XML Messages (Search Using Archive) or Archived XML Messages (Search Using ID)
Thanks
Abhishek

Similar Messages

PI message archiving

Hello
I have recently been made responsible for a PI 7.1 system, and am new to SAP and PI. I have some general questions about message archiving and would be grateful for some advice.
I understand that message details are saved to SXMSPMAST and associated tables. There is a limit to the number of rows in the tables.
Q. What happens when the tables are full?
Q. Is it possible to increase the number of rows that they can hold?
I believe that none of our existing interfaces have been configured for archiving/retention.
Q. Should the interfaces have been configured for archiving before first use?
Q. Does this only apply to asynchronous interfaces?
The vast majority of messages in SXMXPMAST have ITFACTION set to 'INIT'. I understand that these messages will not be deleted or archived.
Q. Is it possible to change the ITFACTION and is this something I should be doing?
Q. There are some synchronous messages with a status of system error on our system. I am not able to cancel these messages in SXMB_MONI. I do not want to keep a record of these messages as they were sent before the system was 'live'. Is there anything I can do to delete them?
I have found several documents on the SAP forums and blogs, but none deal with the case where existing interfaces haven't been configured for archiving.
Kind regards
Steve

Dear Steve,
a lot of questions Let me answer them one by one...
I understand that message details are saved to SXMSPMAST and associated tables. There is a limit to the number of rows in the tables.
Q. What happens when the tables are full?
A. Nothing. The number which you refer to as 'limit of rows' reflects the number of expected entries. This value is used to control reorganizational tasks in PI.
Q. Is it possible to increase the number of rows that they can hold?
A. Yes, but SAP does not recommend this in general. Also there is no need to increase this number as it used as a threshold for reorganization only.
I believe that none of our existing interfaces have been configured for archiving/retention.
Q. Should the interfaces have been configured for archiving before first use?
A. Yes, definitely. The interface action nis determined right when the message enters the Integration Server. Therefore it is important to configure archiving beforehand. However, as of PI7.10 SP6 report RSXMB_DEL_TO_ARCH is available to change the interface action from 'deletion' to 'archiving' belatedly (this direction only!).
Q. Does this only apply to asynchronous interfaces?
A. Yes, synchronous messages will not be archived.
I

Connection Message Archiver problems

Hoping someone can help.
I'm attempting to capture voicemail messages from multiple users. I need to preserve message headers and voicemail messages.
I've downloaded and installed the Unity Connection Message Archiver program from http://www.ciscounitytools.com/Applications/CxN/MessageArchiver/MessageArchiver.html
I followed all the step for configuration.
I can login and search for and select a mailbox or messages for archiving.
However, when I click the "Archive", I see the processing message, but then it reports an error.
Here is the error from the log file: "Failed establishing IMAP connection in the ConnectionMessageBackupFunctions constructor:Failed to attach to Connection server on port 7993 for IMAP login in AttachViaImap"
I've attached the full log file.
I've verified that the IMAP service is running. I've also followed all troubshooting steps found here: http://www.ciscounitytools.com/Applications/CxN/MessageArchiver/Help/MessageArchiver.htm
Can anyone point me in the right direction.
Thanks in advance.

Hi Jonathan,
I would move this thread over to the Unified Communications
Applications sub-forum as tool designer/engineer and Unity Connection
guru Lindborg will most likely have a great answer for you
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/unified-comm-application?view=discussions
Cheers!
Rob
"May your heart always be joyful
And may your song always be sung
May you stay forever young "
- Dylan

Message archiving -Volume test

Hey Guys
We are planning to enable Message archiving for our interfaces.
We have around 2 million messages waiting to be archived,the fear we have is that once we enable message archiving,XI will try to archive all these messages and might choke up due to large volume of data.
Is there a way to enable message archiving in chunks?or may be some other way to handle this situation.
Thanx
Saif

Dear Saif,
for archiving messages junkwise you can use the retention period. This way you can take control on the number of messages that are excluded from archiving.
To do so simply call report RSXMB_ARCH_INTERFACES, click 'Retention Periods' and increase the value for 'XML Messages Without Errors Awaiting Archiving'. If, for example, the 2 million messages result from past 12 months, set the retention period to 330 days. This way all messages of the past 11 months will not be archived as the are they are considered to be still in retention period.
After archiving of messages older than 330 days has completed successfully, you can decrease the retention period to 300 days to archive messages of next month.
In case this does not work out kindly open an OSS message. There are additional options to control the data volume using techniques of the build-in parallelizer. For this I would appreciate to have access to the system under investigation.
Best regards,
Harald Keimer
XI Development Support
SAP AG, Walldorf

XI Message archival

Hello all,
I am working on XI 3.0 support project.
This project was implemented around 1.5 years back.
Hence there are lots of messages present in the current XI System
My company now wants to follow an archival policy for these existing messages.
I already have information on how to archive the messages.
What I want to know is which is the best policy that should be followed to archive such huge amount of data.
Pls let me know as this input is very vital for our progress.
Thanks and Regards
Neetu

Hi,
There are not many different ways to archive/delete (w.r.t to settings).
This link has information http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/content.htm
links from above replies give step-by step approach.
1) Based on business requirements, the archiving/ retention periods are set for the msgs/interfaces.
2) You need to arrange storage space for the archived objects..possibly in a different server, that is when you reach a stage that you may not need these messages immediately. but you can always restore the file to right location in the XI/PI server & the msgs can be viewed from the "archived msg" option
3) Under normal circumstances you cannot archive the old messages from the above settings (for your scenario). You need to configure the archive settings for Interfaces which you need to archive before they are run.
For old messages you need to perform additional tasks as described in the note 789352.
4) This sap note has a lot of information - 872388
Regards
Vishnu

SAP XI message archiving

Hi
I am running sap archiving and deletion of messages. I have observed that only messages from the CENTRAL pipeline are getting archived while the other pipelines like PIPELINE_RECIEVER etc are not getting archived and deleted.
Please can anyone let me know what is the problem.
Many Thanks
Deb Sircar

Hi
As per the Archiving/ deletion settings, an Interface (its message on the whole) is either Archived or Not Archived.
when "Archived" all pipeline steps are archived & "once deleted" you cannot see that message any more in SXMB_MONI (but only from the archived msgs) and the archiving process is said to be complete.
Check my posts in this link
Re: XI Message archival
explain clearly the issues you face, what you mean as PIPELINE_RECEIVER.
Regards
Vishnu

Cisco XCP Message Archiver Alerts

Hello,
I've set up the Cisco XCP Message Archiver to archive Jabber conversations to an external database. I've also configured the XcpMessArchDBConnectError alert to send an email from the Real Time Monitoring Tool when the connection to the database goes down.
The first time the database goes down, RTMT send an alert, but any subsequent outages to not cause the alert to re-activate. Even with the database down, the CUPS web interface showing the connection as unavailable, you do not see the alert trigger in RTMT. Does anyone know why this may be?
The system version is: 9.1.1.41900-1.
Thanks.

If you restart the Cisco Presence Engine service you get the following message in RTMT:
%UC_PE-2-PEIDSSubscribeError: %[PEIDSSubscribeErrorAlarmMessage=UCCN subscribe failure on table UCProxyProfile][AppID=Cisco Presence Engine][ClusterID=StandAloneClustere6bc8][NodeID=<hostname>]: The Cisco Presence Engine service was unable to subscribe for IM and Presence Service database change notifications AppID : Cisco Syslog Agent ClusterID : NodeID : <hostname> TimeStamp : Tue Dec 09 12:41:30 GMT 2014
Does anyone know what could be causing this?

Message archiving/deletion in PI 7.1

Hi All,
I'm new to SAP PI. We have newly implemented PI 7.1 in our landscape. We have installed PI in HP UX 23 with oracle as the database.
We have configured the messge archival/deletion in our PI production server. We have allocated a dedicated file system to store the archived messages. Eventhough we have maintained the path of the archival_interface, no messages are archived in this drectory.
We are using synchronous interfaces and while executing the report ( RSXMB_SHOW_REORG_STATUS ) as per the note 872388, the report says that there are more than 1700 messages to be archived. But no messages are getting archived in the path mention as of now.
I think we have missed out some steps while configuring the archiving process. Can somebody help me with the steps involved in PI integration engine message archival/deletion.
Your timely help will be much appreciated.
Thanks in advance.
Regards,
Varadhu

Hi,
Go to transaction "SXMB_ADM" on the ABAP stack of your XI installation. Go to "Integration Engine Configuration" and click on tab "Specific configuration". Check if you have the parameter "LOGGING_SYNC" enabled (It should have a value 1). In case it is not present, please create this entry and have the default value as "1". This will enable you to view all sync messages on sxmb_moni.
Thanks,
Sidhartha

Message Archiving for the Adapter Engine

Hi,
we have configured archiving for Integration Engine (SXMB_MONI) messages on the Production XI System. is it necessary to configure Message Archiving for the Adapter Engine also ? in which scenarios archived adapter messages are useful ? are there any other advantages/disadvantages for this(in case of errored messages on the adapter engine) ? Please share any ideas.
Thanks
Pavan.

>>is it necessary to configure Message Archiving for the Adapter Engine also
Not necessary,but depends upon the scenario,lets say you are posting messages to external partner's FTP and there was some issue in connectivity due to which file was not delivered,in this case you need to send the message again.
same thing can happen in inbound messages too.
>>in which scenarios archived adapter messages are useful ?
i would do this specifically for JDBC sender coz once you pick up the files based upon SQL query,you change the flag so that those values are not picked next time,in this case you can't re-run the old query and get same results.
this also holds for proxies and file too.
Thanx
Aamir

Message archiving in adapter engine

Hello Gurus,
We have successfully configured message archiving in the integration engine via all the sap documentation and sdn blogs.
For the archiving in adapter engine, we have followed the documentation as well however our messages are simply not being archived in the adapter engine.
The steps for AE we took are as follows:
1. goto DataArchivingService/DAS and created an archive store, home path synch and assigned it to an archive path (the ILM browser connects fine as well)
2. created the archiving background job in RWB (both default and a custom one with rules)
The jobs seem to be running fine on our schedule but no messages are being processed. I am assuming the retention period in AE is the one we have set up in SXMB_ADM for IE.
Is there anything we may have missed?

Hi,
Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
Also check this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
Regards,
Naveen.

XI Message Archiving Problem

Hi,
I was trying to schedule XML Message Archiving Job in XI 3.0 SP16.
As per schedule procedure, I have defined interfaces for archiving and retention period for the same. Also I have configured the archive object BC_XMB in SARA and activated archive infrastructure SAP_BC_XMB in SARI.
I have scheduled the job SXMB_ADMIN, and the job ran without any error. When I checked the job log of ARV_BC_XMB_WRI<timestamp>, it says "0 XML Messages Archived" and I am unable to see the archive file in the target location.
I have also run the report as per note 872388, i.e. RSXMB_SHOW_REORG_STATUS and it shows "Msgs not in retention period (can be archived): 2,030".
Can anybody help me, how can I solve this problem, so that I can archive the XML Messages.
Thanks in advance.
Regards
Jaya Ganesh

Hi Jaya Ganesh,
Hope u followed this
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
http://help.sap.com/saphelp_nw04/helpdata/en/fc/e6173d3215cc40e10000000a114084/frameset.htm
U may also refer these SAP Notes
824374 - XI messages are not archived or deleted
866896 - XI messages are not archived and/or deleted
Regards,
Prateek

Adapter Engine Message Archiving

Hello,
Can anybody share with me the guide for Adapter Engine Message archiving for PI 7.1
Thanks ,
Loveena

Hi,
Refer these links, it should help
XML Data Archiving - Configuration Guide for J2EE Applications
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/65901c2e-0801-0010-e79a-de4ed9275d70?quicklink=index&overridelayout=true
http://help.sap.com/saphelp_nw04/helpdata/EN/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
Re: Archiving message PI7.1 Could not find msg in archive error
Regards,
Nithiyanandam

Configuring Message archiving

Hi,
while configuration of XI 3.0
for the step <b> Configuring Message Archiving for the Adapter Engine and the PCK</b>
on the URL http://<host>:<port>/DataArchivingService/DAS
when we click on the link like "Configure Archive Store "under Administration gives following error
<b> Details: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Error getting Naming on Server in getInitialContext operation
</b>
can some one help in this matter.
Thanks
Regards
Deepti

the problem is the Exclusive = Yes indicator in the access sequence.
Your other message has this exclusive indicator as well.
so if the first message is found, then no other message wil be determined
to allow several messages in one PO, you must not set this exlusive indicator

XI/PI Message Archiving

Hello Geeks,
Can someone provide me the best practices documentation and how to guide for Message archiving in XI/PI. I appreciate your help.
thanks..

Hi,
Refer these-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/80553b4d53273de10000000a114084/content.htm
Thnx
Chirag Gohil

Yahoo: Message Archiving

i know this is probably a question that you'll direct me to yahoo for, but i come to you guys for everything cuz you're all so smart lol.
For some reason after logging out of yahoo messenger for mac, my message archives disappear. They log everything and are available while i'm logged in, but if i close the app and relaunch, everything is gone.

*A few suggestions:*
Trash the com.yahoo.messenger3.plist file. Unknown what the "3" stands for (# of IDs?). Yours may be a different number.
Home>Library>Preferences>com.yahoo.messenger3.plist
============
Home>Library>Application Support>Yahoo! Messenger>Logs
Trash all the log files.
After doing all of the above, repair permissions & then restart.
You may need to redo a few settings. Unsure as the current version of YIM is *still BETA* - v3.0.
Since the current version is BETA = buggy, you should expect to experience problems.

Retrive Message ID from MESSAGE ARCHIVE in XI

Similar Messages

Maybe you are looking for