Retriving material documents
Hi All,
what are the ways to retrive the archived material documents other than retriving via MB51.
what is the purpose of the push button storage system - retrieve files and store file in the T.code SARA for the archiving object MM_matbel.
is it required to run any batch job before retriving or we can always retrieve via MB51 after archiving.
Thanks
Mahendra
Hi Mahendra,
Let me answer your second question first. Sometimes the terms 'restore', 'retrieve' and 'display' of archived documents is confusing.
Restore is to bring back the data from archive files back into the SAP database. This feature is not available for all archive objects; and also not a recommended action to do.
When you run a archiving job, it first create archive files in the file system, which can later be moved (optional) to a external storage system (like IXOS). Retrieve (as in SARA-> Storage System) is the process of bringing back the archive file to file system from the external storage system. So the store and retrieve option can be used only if you have a external storage system.
What happens thru transactions like MB51 is the display of archived document, where in the specific document (or range of documents / data) is fetched from the archive (either archive file or external storage system) for temporary display.
Hope this clarifies.
You can also use Archive Information System (transaction SARI) and Document Relationshiop Browser (transaction ALO1) to view the archived material documents. Earlier there was a option of viewing archived material documents using transaction MB03 (see note 431689) but is no longer supported as this feature requires index MKPF_ARIDX, which is no longer supported.
However, if you go to document display from either SARI or ALO1, it will be thru MB03.
Thanks,
Naveen
Similar Messages
-
Automatic TO creation and confirmation for a Material document
Hi Dear All,
i am new to MM andWM.
I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
Double click on control data tab
Hear for my warehouse I given input like Auto TO = 1,
AddId = select check box.
And in Assign control tab for 101 movement type I have given input like below.
Automatic TO = 1.
TO item can be confirmed immed. = tick checkbox
Propose Confirmation = tick checkbox.
Foreground/Backgrnd = D.
After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like TO processing finished: TR total: 17, TO created: 0, Errors: 17.
If I check header details of transfer requirements in LB03, i am not seeing Tick Mark in Auto TO Creation field.
Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
Thanks in Advance..Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2 -
BAPI_GOODSMVT_CREATE - Error while posting a Material Document
Hi Experts,
We are trying to do the material document posting using the transaction "MB1C" manually in SAP. The movement type which we are using for the same is "261". While doing this is, it is asking for a work order number and the Recipient number. We gave the Recipient Number as "123". Material document is created successfully.
Again using the same transaction "MB1C" , we are trying to do the reversal of the material document which we posted previously against another work order number for the same material and the serial number if the material is serialised and as well as for the non serialised material.
Both this case, in SAP the material document is created succesfully. This is done manually in SAP.
When we are trying to create the material document using the BAPI 'BAPI_GOODSMVT_CREATE', for the above scenario, posting the material document '261' movement type for one work order and the reversal for another work order '262' movement type for the same material (whether it is a serialised or non serialised) we are getting the eror as "RE Qty. transferred exceeded 1 PC: 50,003,695 C001 USED 1200".
We are passing the following at the item level. MATERIAL Number, Plant, STGE_LOC, ENTRY_QNT, MOVE_TYPE, BATCH, ORDERID, RESERV_NO, RES_ITEM, ACTIVITY, XSTOB for reversal.
We are passing the GM_CODE as '05'.
Please let us know what needs to be changed inorder to create the material document properly without getting errors.
Thanks in Advance,
Mohan.Hi,
We fixed this issue by removing the reservation number of the material when we are trying to post the material document with the movement type "262".
The reason for removing the reservation number for the movement type "262"
The reservation number is getting created against a work order when we trying to create the work order in IW32. This reservation number is used for validating the stock while we are trying to consume and doing the reversal.
SAP is allowing us to reverse the consumed quantities only based on the reservartion number and hence we got this error.
To fix this error, if we are trying to reverse a particular material against a different work order for which it has been consumed previiously, remove the reservation number and item number and try posting the material document.
Hope this solution will solve your issue:)
Thanks and Regards,
Mohan. -
Creation of Material Documents With Mvt Type
On Performing Post Goods Issue (PGI) in one Plant in case of Plant to Plant Dispatches, there should be Inbound delivery created for already created Purchase Order (PO). In addition after creation of inbound delivery, there should be material document created with 103 movement. This Material document is triggered when the inbound delivery is saved. Once Warehouse processes are finished, then Post Goods Receipt (PGR) happens, so 101 Movement Type happens for Purchase Order. PGR document should trigger one more material document with 104 movements; this document is reversal for material document with 103 movement type.
can any one suggest to enhance SAP for this?
Moderator message : Requirements dumping is not allowed, show the work you have already done. Thread locked.
Edited by: Vinod Kumar on Oct 21, 2011 5:18 PMHi Nitin,
Before creating the Service type of product, you have to define the Base category for Service type product. Generally the category for service will be created under the R3 hierarchy R3PRODSTYPE. You can create this category using the TCode:
COMM_HIERARCHY. Here you have to select the product type as Service and have to assign the set types to the category.
You can create a service product using the transaction : COMMPR01 -> Click on Service ICON -> Select the Category for Service Type. Then fill in the details for Service Product description, Service ID(Based on number range settings for products), Language.
Also fill other details like Base Unit of measure, Pricing condition for different sales areas for the service product.
Since you are using CRM7.0, you can do all these activities using a POWER USER role.
For more information about Set types and hierarchies please refer the following help link:
http://help.sap.com/saphelp_crm70/helpdata/EN/46/57672501a208e7e10000000a114a6b/frameset.htm
Hope this helps!
Regards,
Chethan -
Multiple Posting change notice created for one material document
Hi All,
The scenario is that the user needs to transfer material from unrestricted to quality stock type. while doing so the storage type is different than the actual storage type for the material. Meaning if the material is normally stored in high rack storage type, when it is found that the material is damaged or expired it need to be moved to the quality storage type. For this the user will first create material document in IM with movement type 322 transferring material from unrestricted stock to qualtiy stock. A PCN will be created in back ground which will in turn be converted manually by the user to a TO. while doing so the user will pick the quant manually from the required storage type and select the destination storage type as the quality or quanranntine area.
The issue here is that system creates one PCN for each material document line item. The requirement is that the system should create only one PCN with multiple lines for one Material document.
The setting in the movememnt type clearly says that it will behave as it is behaving.
Is there any other way or setting by which we can create one PCN with multiple line items for a material document.
Would look forward to your replies.
Regards,
JeetendraThanks and Sorry for the delayed reply. We have now convinced the users that the system behaviour is standard and we cannot change the same.
To your question about the need to have one PCN with multiple lines please note that the setup is such that when material document is created for transferring material from unrestricted to quality and vice versa this document is created with multiple materials in one go. Now when the PCN is to be converted to TO then the user ends up in creating number of TO's equal to the number of lines in the Material Document. We wanted to avoid this and hence this was posted in SDN. -
STO - Excise tab not getting displayed in material document after posting.
Dear all,
We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
It is plant to plant stock transfer with excise, the process that we are following as given below:
1) STO PO - ME21N
2) Outbound delivery - VL10B - Post PGI in VL02N
3) Outgoing excise invoice - J1IIN - With the key DLFC.
4) GR - MIGO with excise invoice capture.
During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
Request to please do let us know if we have missed out on any configuration or master data.
Regards,
mahesh.Hi,
Do the all customization setting for CIN for reference check the following link for India. and Material management
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
You have to maintain Excise master data for material,vendor and PLant in J1ID .
reward if helpful, -
Material Document is not generated in PGI
Hi,
Iam doing PGI i am not getting Material document number and i went to MB51 there also i am not any document number is there any customizing settings for the material document
thanks
seshuHi,
Check the material, it might be service material, go to material master in MM02 and check the Item category group and check weather it to be LEIS "Service with delviery" if it is then PGI will be done but not material doc will be generated
Second:- Check weather material is maintained as Non-Valuated, and check weather Accounting1 view is maintained or not
if not maintained then maitain standard price and valuation control there
Regards
Shambhu Sarkar -
Standard report for material document with excise
Dear Gurus,
Is there any standard report for which i can trace for all the incoming material grn whether excise is captured or not.
i.e) a report with excise no, quantity and material document
thanks in advance
VasanthHi,
J1i7 is the standard report which shows wether the part1 or part2 is posted or no posting is done, you can select the layout as per your choice by change layout.
Thanks,
Vinay -
Find Material Document with Movement type 103 for material document 105
Hi experts,
In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
Regards,
AbdullahHi,
you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
Regards,
Chaitanya -
Report for material documents with storage location
Hi gurus,
I would like to know if there is a report to display material documents but in the same screen display storage location from and storage location dest.
Thanks for your help.
Regards.Hi,
You can use MB51 or MB59 with customised layout selection for your requirement.
With regards,
Ajay. -
Regarding : Material document data and PO data do not match (Plant)
Hi Gurus,
Please go through this BAPI program.
While uploading it is giving an error ' Material document data and PO data do not match (Plant) '.
Please help regarding this issue.For all Other moment types it is working fine except this 351 moment type.
dATA: i_excel TYPE truxs_t_text_data. "work table for excel upload
DATA: BEGIN OF it_itab OCCURS 100,
docdate(10),
postdate(10),
mvt_type(3), "Movement Type
plant(4), "Plant
lgort(4),
pur_doc(10), "Purchase Document No
po_item(3), "Purchase Document Item No
material(18), "Material Number
delnote(16),
erfmg(13),
uom(3),
lfmng(13), "Quantity
batch(10) TYPE c,
vfdat TYPE vfdat,
END OF it_itab.
DATA: it_goodsmvt_head TYPE TABLE OF bapi2017_gm_head_01 INITIAL SIZE 100,
it_goodsmvt_code TYPE TABLE OF bapi2017_gm_code INITIAL SIZE 100,
it_goodsmvt_item TYPE TABLE OF bapi2017_gm_item_create INITIAL SIZE 100.
DATA: wa_goodsmvt_head LIKE LINE OF it_goodsmvt_head,
wa_goodsmvt_code LIKE LINE OF it_goodsmvt_code,
wa_goodsmvt_item LIKE LINE OF it_goodsmvt_item.
DATA: w_mat_doc TYPE bapi2017_gm_head_ret-mat_doc,
w_year TYPE bapi2017_gm_head_ret-doc_year.
DATA: BEGIN OF it_errmsg_goodsmvt OCCURS 10.
INCLUDE STRUCTURE bapiret2.
DATA: END OF it_errmsg_goodsmvt.
DATA : obj_type LIKE bapiache09-obj_type,
obj_key LIKE bapiache09-obj_key,
obj_sys LIKE bapiache09-obj_sys.
DATA: v_date1 TYPE sy-datum.
DATA: v_date2 TYPE sy-datum.
DATA: w_lines TYPE i.
DATA: errflag.
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-100.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK bk1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
Start-of-selection processing
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_line_header = 'X'
i_tab_raw_data = i_excel
i_filename = p_file
TABLES
i_tab_converted_data = it_itab[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_itab.
REFRESH it_goodsmvt_head.
REFRESH it_goodsmvt_item.
CONCATENATE it_itab-docdate6(4) it_itab-docdate3(2) it_itab-docdate+0(2) INTO v_date1.
CONCATENATE it_itab-postdate6(4) it_itab-postdate3(2) it_itab-postdate+0(2) INTO v_date2.
wa_goodsmvt_head-pstng_date = v_date2.
wa_goodsmvt_head-doc_date = v_date1.
wa_goodsmvt_head-ref_doc_no = it_itab-delnote.
wa_goodsmvt_head-pr_uname = sy-uname.
APPEND wa_goodsmvt_head TO it_goodsmvt_head.
Maintain it_goodsmvt_code
wa_goodsmvt_code-gm_code = '04'.
Maintain it_goodsmvt_item
*LOOP AT it_itab.
IF wa_goodsmvt_item-po_number IS INITIAL.
wa_goodsmvt_item-po_number = it_itab-pur_doc.
wa_goodsmvt_item-move_type = it_itab-mvt_type.
wa_goodsmvt_item-MOVE_PLANT = it_itab-plant.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = it_itab-material
IMPORTING
output = it_itab-material.
wa_goodsmvt_item-material = it_itab-material.
wa_goodsmvt_item-stge_loc = it_itab-lgort.
wa_goodsmvt_item-po_item = it_itab-po_item.
wa_goodsmvt_item-entry_qnt = it_itab-erfmg.
wa_goodsmvt_item-ENTRY_UOM_ISO = it_itab-uom.
wa_goodsmvt_item-po_pr_qnt = it_itab-lfmng.
wa_goodsmvt_item-batch = it_itab-batch.
wa_goodsmvt_item-expirydate = it_itab-vfdat.
wa_goodsmvt_item-NO_MORE_GR = 'X'.
wa_goodsmvt_item-mvt_ind = 'B'.
APPEND wa_goodsmvt_item TO it_goodsmvt_item.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = wa_goodsmvt_head
goodsmvt_code = wa_goodsmvt_code
IMPORTING
materialdocument = w_mat_doc
TABLES
goodsmvt_item = it_goodsmvt_item
return = it_errmsg_goodsmvt.
Process of commit work
IF it_goodsmvt_head[] IS NOT INITIAL.
DESCRIBE TABLE it_goodsmvt_head LINES w_lines.
ENDIF.
IF it_goodsmvt_item[] IS NOT INITIAL.
DESCRIBE TABLE it_goodsmvt_item LINES w_lines.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
IMPORTING
RETURN =
CLEAR errflag.
READ TABLE it_errmsg_goodsmvt INDEX 1.
IF it_errmsg_goodsmvt-type EQ 'E'.
WRITE:/'Error in function', it_errmsg_goodsmvt-message.
errflag = 'X'.
ELSE.
WRITE:/ it_errmsg_goodsmvt-message.
ENDIF.
IF errflag IS INITIAL.
COMMIT WORK AND WAIT.
IF sy-subrc NE 0.
WRITE:/ 'Error in updating'.
EXIT.
ELSE.
WRITE:/ 'Material Document created successfully and the Document Number for the Material',
wa_goodsmvt_item-material,'is:', w_mat_doc, w_year.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.Hey,
Just wanted to post that in my case this was the error of MVT_IND field in item table. When I made it from 'B' to blank then it worked.
Mine is solved....
Thanks -
PO number in MB1B - 541 material document
Hello,
We have a subcon PO and we reference it and transfer stock to stock with subcontractor ie: movement 541. using Tcode MB1B. However when we view the material document the column for PO is blank. We would like to populate the column with PO number that was referenced during MB1B
Any suggestions to address this issue.
Thank you.
SDatarHi,
We use subcontracting in our business and had the same issue. We raised a SAP Support call to and the answer was when transferring goods to the vendor using MB1B or ME2O there is no reference to the PO in the material document number. When issuing goods to the Venndor you can enter PO number and it reads the quantities from there but when the movement takes place there is no reference to PO whatsoever.
If you want this information you prob need a user exit developed.
Please award points if helpful.
Kind Regards.
Adeel Sarwar -
Link between Material Document number & Accounting document number
Hi All,
For material document there is a corresponding accounting document number generated.However this is not the rule in all cases.
Where is the link between the two(Material Document & Accounting Document) ?
In other words i want to list those material documents only, for which accounting documents are generated.
Regards
Piyush KothariSTEP 1
SAP query way to extract your information.
Create an infoset SQ02 with a single table MKPF. (include key fields in the field group)
Step 2
From Extras
Create an additional field called zawkey (like bkpf-belnr) which will concatenate the MM document number MKPF-MBLNR and MKPF_MJAHR. The sequencing shall be number 1.
You may use this code below and paste also (this needs authorization as well)
data: zzawkey like bkpf-awkey.
clear: zawkey, zzawkey.
concatenate mkpf-mblnr mkpf-mjahr into zzawkey.
zawkey = zzawkey.
Add another field called ACCDOCNO (accounting documnet number) with sequencing number 2 with following code.
data: zaccdocno like bkpf-belnr..
clear: zaccdocno, accdocno.
select belnr from bkpf into zaccdocno where
bukrs = ccode and
GJAHR = MKPF-MJAHR and
awkey = zawkey.
endselect.
accdocno = zaccdocno.
Step 3
Include the additional fields into the field group.
Step 4
Click on the selection tab and create a parameter called ccode with a description Company Code and against
LIKE BKPF-BUKRS
Extras OBLIGATORY
Step 5
Click on the selection tab and create a seelction criteria pdate with a description Posting Date for the field MKPF-BUDAT
Extras OBLIGATORY
Step 6
Save, Generate and assign the infoset to a user group.
Step 6
Create a SQ01 query under the usergroup with all the fields in the infoset. and Execute. Enter a company code and one date of a working day where you expect material transactions.
The result will be all the material documents and their corresponding accounting documents, if available. If you want to see only those material document that do not have corrsponding accounting documnet, then while you are in the selection screen say accounting document number is not equal to blank. -
How to fetch accounting document number from known material document number
Hi,
Using MIGO transaction, by giving mblnr(material document number) as input, I get accounting document number by clicking FI document.I have to add this accounting document number in my report for corresponding known mblnr(material document number) values.
My question is how to fetch the accounting document number present in MIGO to add in my report program.
I used the xblnr(Reference Document Number) which is present both in mkpf and bkpf tables to fetch values.
I extracted xblnr values with known mblnr values from mkpf (Header: Material Document table).
and then extracted belnr(accounting document number) from bkpf (Accounting Document Header table) by using xblnr values.
But the query is running for a long time.
Is there any other method to extract the values in a simpler way.
Kindly advise.
Thanks and Regards,
SanjeevI had the values of xblnr and some other fields such as mblnr, budat etc in wi_item table.
I created a new internal table i_xblnr and got down those values.
And then created a new internal table i_belnr and tried to get values of belnr in it.
The code I wrote is given below:
IF not wi_item[] is initial.
loop at wi_item.
at new xblnr.
ws_xblnr-xblnr = wi_item-xblnr.
append ws_xblnr to i_xblnr.
endat.
endloop.
select belnr xblnr from bkpf into table i_belnr for all entries in i_xblnr where xblnr = i_xblnr-xblnr.
ENDIF.
Kindly look after it.Thank you.
Regards,
Sanjeev -
Link to find Accounting document number from Material document number / PO
Hi
We are working on a custom report, in which we need to print purchasing details (from EKPO, EKKO & EKBE) as well as accounting details (from BSEG & BKPF). We need to hit BKPF/BSEG with the accounting document number, since it is the only key field (though PO number is there in BKPF, we can not use this because it is not a key field)
My question from which table we get the accounting document number ? We need to provide a link between purchasing & accounting through accounting document number, but how to find the accounting document number. ?
Thanks
Venkat.Venkat,
I guess you are trying to fetch Accouting Documents for goods receipt against PO.
To do this, you need to look at the PO History table (EKBE) and find out the Corresponding material document (VGABE = 1 for good receipt).
Get the value of BELNR and GJAHR.
Concatenate BELNR and GJAHR into your refernce key (like BKPF-AWKEY).
Then use this key to read table BKPF with the following key
AWTYP = 'MKPF' for Material document
AWKEY = reference key generated above.
AWSYS = the value of the logical system (if used) or blanks
This will get you quicker access as compared to what you've described below. In this case, the system uses a standard SAP Index "Index by application type and key" to fetch the relevant records.
Hope this helps.
Maybe you are looking for
-
CS6 Design Standard , clone, migration tool, trial mode (urgence)
Hi all and sorry for this question. I clone on a external disk my MacBook Pro (OSX 10.7) with Super Dumper . Then i have istalled OSX 10.8.2 and imported all data and applications with the migration tool during the installation. My problem is that no
-
How can I limit the number of emails resident in Apple Mail?
How can I limit the number of emails resident in Apple Mail inbox?
-
Macbook pro 15 retina graphic card problems
I have a problem that my mac dont wanna run the Geforce gt 650M graphic card.. its saying that is running the geforce but you can tell by the proformance that its using the intel HD graphic 4000.. is it software or hardware problems ? i try running
-
hello, I have desided to use AVG as my anti virus rather then norton, all seems to be ok at the moment, but is there anything that I should do specific for using dreamweaver and having the AVG anti virus running in the background. regards kenny
-
Hello all, suddenly! I wanted to create a dynamic page .. as I clicked the "Next" Butoon to go to Step 2 I got a 404 Page not found error for: http://host.domain/pls/portal30/PORTAL30.wwv_builder.accept what happend? somebody has a clue? ./regards To