Retrofit between ECC 6.0 System and R/3 4.7?

Is this possible? If I have ECC 6.0 as my Maintenance Landscape and 4.7 as my Implementation landscape? I thought it was however I am getting this error:
The function is not available for this support package in target system
Message no. /TMWFLOW/TRANSPORT_N689
Diagnosis
The function module called is not in the target system. The current basis support package in the target system is too low.
Procedure
Either import the current basis support package, or find a note for this function.
If you are retrofitting transport requests, check whether notes 1040612 and 1066123 are in your satellite systems.

Hi,
As mentioned by the error message, you should check the basis support pack level (s.w component: SAP_BASIS) for your satellite system. The notes mentioned in your error message specify the supported basis pack levels.
Thanks & Regards,
Kriti Bhalla

Similar Messages

  • Relationship Between ECC Customers (Contact Persons) and CRM BP

    Hello,
    I am new to middleware and need some help with the relationship between ECC customers/contact persons and CRM business partners.
    We are transferring via bdoc this information from ECC to CRM.
    Which bdoc types are used when transferring customers/contact persons? I believe it is BUPA_MAIN but am not too sure. How is the relationship between customer its contact person transferred? Is this done through BUPA_REL? I looked at the segment fields in SBDM but am not too sure how to understand the relationship...
    Thanks for the help!
    Regards,
    Tiffanie

    Thanks! With the initial load, how do I check what fields are being passed in the bdocs?
    I tried to look for customer_main, customer_rel in SBDM  and couldn't find it. Instead I used BUPA_MAIN and found some segments but couldn't find all the data that was being transferred (e.g. customer name, address, etc...) Where do I find all the fields contained in the bdoc?
    I see them in SMW01 when I view the bdoc contents but can not find the actual structure (data fields) that are being brought in from ECC.
    Thanks!
    Tiffanie

  • Compatibility issue between your power management system and Windows 8.1

    I have purchased a new Lenovo Ideapad S410 and have this problem.
           Compatibility issue between your power management system and Windows
           It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (100% complete)
           If you'd like to know more, you can search online later for this error:
    VIDEO DXGKRNL FATAL ERROR
    Please help! My laptop is only 5 days old.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • Difference between Business service, Business system and Business process

    Hi,
    Can anyone tell me the difference between Business service, Business system and Business process?
    Thanks,
    Harikumar. S

    Hi,
    <b>Business system</b>
    It is a logical system from a business point of view.
    One or more logical systems that belong together from a business point of view is called a group of Business system group. A business system group represents a unit within a company or organization that can be defined according to legal, economic, administrative or geographic factors.
    The objects in a business system group are uniquely identified by a uniform numbering system.
    <b>Business process</b>
    Business procedure within an enterprise that uses resources and can involve activites from a number of different cost centers in a controlling area.
    When executing a business process, activities can be utilized for several cost centers of a controlling area.
    <b>Business service</b>
    It’s a third party system.
    All these belong to a Business Scenario which is
    Description of the flow of business processes according to a business typology. A business scenario represents a template for a business process, which runs within a particular area of a company process. All processes required to completely process the task are listed in chronological order in the scenario. Business scenarios can be described graphically, in either aggregated or detailed form (EPC). Example: Direct sale to industrial recipient
    <b>**DO REWARD POINTS IF THIS IS HELPFUL FOR YOU**</b>
    Regards
    AK

  • Scenario for interface between a non sap system and a SAP erp

    Hello,
    I need some help in order to elaborate a interface between a SAP ERP and a non-sap system with the help of a XI system.
       -  At first regarding the interface from the non sap system and a SAP ERP :
           the non sap system sends a flat file to the XI system. The flat file contains a row with header data and rows with item data. We were thinking when the file arrives to the XI system, to save the data in a header database and in a items database in XI. is it possible ?
    And then to have like a job that reads the database and creates idoc and sends them to the SAP erp and updates the xi header and items database  with a flag that means that the records have been sent to the SAP erp.
       -   Regarding the interface SAP erp to non SAP system:
           the SAP erp sends idoc to XI. Then the idocs are transformed into flat file.
    Is this scenario possible ?
    Do we need any adaptator between the non sap system and the XI ?
    Thank you for your help
    Christophe

    Hi Bontron,
    Idoc doesnot support synchronous call. So you can use either proxy or function module and inturn call the idoc from them and send response back to xi. You need to have two scenarios for your design.
    Scenario1:   Source File (file adapter) -- xi -- Dump into database tables (Jdbc Adapter)
    Scenrio2:  Pickup form Database tables  (Jdbc Adapter) -- xi -- RFC Adapter  ---> This is synchronous call.
    Regarding the interface SAP erp to non SAP system
    You can send idoc to xi and from there use File adapter to send to the receiving system.
    These blogs may help you to some extent:
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    https://wiki.sdn.sap.com/wiki/display/XI/step%2bby%2bstep%2bRFC%2bto%2bJDBC%2bscenario   (your scenario will be opposite to this)
    Regards,
    ---Satish

  • Administration differences between an As Java system and an As ABAP system?

    Hi, I'm not that familiar with SAP systems that are As Java based only, so apologies in advance if I ask real stupid questions here!!
    Can someone please explain how one logs onto an As Java only system?... ie without the ABAP stack does one still use the SAP logon pad or am I getting confused here totally???
    Also how does one do transports in an As Java system?
    If you could send me a document that explains the main differences between an As ABAP system and an As Java system, particularly the differences in administrating these systems that would be very useful. My email address is [email protected]
    Many thanks
    Ash

    Hi,
    Can someone please explain how one logs onto an As Java only system?.
    You can login through browser, use NetWeaver Administrator for most of your activities. There is also Visual Administrator/ Config tool etc these have seperate GUIs.
    It would not be easy to list out the options but i suggest you read understand info from help regarding the details below so that you can administer Java servers:
    Visual Administrator
    NetWeaver Administrator
    Config tool.
    SDM
    With the knowledge of the tools above you can start of administrating Java servers.
    Also how does one do transports in an As Java system?
    You install Portal on Java server and then do transports. You should be having a system administration role.
    Please do a search in help.sap.com and you will find loads of data on WEBAS Java administration.
    Thanks & regards,
    Vijith

  • Compatibility issue between your power management system and Windows,

    Compatibility issue between your power management system and Windows, and my system is Lenovo ACPI-Compliant Virtual Power Controller.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • What's the difference between old SAP appraisal system and the new SAP appraisal system?

    Hi Experts,
    What's the difference between old SAP appraisal system and the new SAP appraisal system?
    Can anyone shed some light please.
    Thanks.

    emgr_update no longer sets or gets the thesaurus from workbench. In 11 all workbench configurations are saved in IFCR configuration directly.
    Hence the thesaurus entry should be added directly in version 11 Workbench as opposed to xml file in older versions.
    And if you want to migrate the changes across environments then import_site script in control directory can be used.

  • Interface between business ware house system and SAP SD module

    hi,
    I want to develop interface between business ware house system(file adapter) and SAP SD module.  how can i post the data into SD system? can any one tell me which Idoc i should use in receiver side?
    if i want to go abap proxy how can do it?
    give some inputs(methods which i should use)
    Thanks in advance
    regards
    Ruban

    Hey
    the selection of IDOC depends upon what you wanna post into SD.get in touch with the ABAP guys and they should be able to tell u exactly which IDOC to use.
    once u have decided on IDOC,you can go for a File to IDOC scenario.
    as far as proxies are concerned,they kinda give better performance compared to IDOC but you need to do ABAP coding for them,in that case u dont need any IDOC
    Thanx
    Aamir

  • OS Migration of SAP ECC 6.0 system and SID needs to be changed.

    Hi Folks ,
                   I need a small help ,
                   here i need to migrate SAP ECC 6.0 EHP 7 from SUSE Linux to AIX and SID is also going to change from ABC to XYZ
                   so what is the proposed plan for it
                   1. we have to built the target system first ... and go with the import or  
                   2. after export and import we have to go for SID change ...

    Hi  Reagan ,
    In homogeneous system copy its possible , its possible to change SID when you are importing but is it possible for heterogeneous copy to change the SID
    here the file system is built with target SID (eg : usr/sap/XYZ , sapmnt/XYZ , oracle/XYZ)
    or we have to create the symlinks like oracle/ABC-->oracele/XYZ and then we have to delete the symlinks and change the SID  

  • AAE_IDOC between ABAP 7.40 system and PI 7.30

    Hi all,
    Currently we are facing a problem with a partner who upgraded a ERP system to SAP Basis 7.40 while PI is still running on 7.30.
    Now they try to connect this system to PI 7.30 with the java Idoc adapter, as is working in other systems not yet upgraded.
    Normally PI should have the highest release in the landscape (note 1043047) but since we/they are not using new functionality I would have expected it to work.
    The error we are getting is Connection factory for <AAE_IDOC receiver channel> is null.
    Now this could be a configuration error I expect but sofar we have not been able to find it.
    What do you think, is the 740-730 connection a definite no-go or should it work?
    Thanks
    Tom

    Hi,
    Please check these blogs you will get the way hoew to connect the java system with PO
    Configuring PI 7.30 Java IDoc Adapter
    PI/XI: PI 7.3 New Java based IDOC adapter's configuration (sender, receiver) - teaser
    Advanced Adapter Engine Extended (AEX) - Installation and Configuration - III
    Overview: Configuration-Guide for ABAP backend systems integrating with AEX
    What is new in SP7 of SAP NetWeaver Process Orchestration 7.31
    Regards
    Raj

  • Diference between Java Card Operating System and java card?

    operating system is inside the ROM, but are the JCVM, APIs and JCRE inside this ROM too?

    Even if you found it, how are you going to get the cards ? How will you get the tools to put the JCRE/JCVM into ROM and start it ? What about the card OS and native methods ? How are you going to engineer that ?
    The cost of all that outweights the benefits of just purchasing the cards already loaded !
    Just my 2 cents

  • Diff between Business System and Business Service

    What is the Difference b/w Business System and Business System and whne we use them?

    Hi,
    Business System : is a logical entity assigned to a Technical System in a SLD
    Business Service: is an Abstract entity without having assigned to a Technical System in a SLD
    for more:
    Business System: http://help.sap.com/saphelp_nw70/helpdata/en/42/c817d9d2296bb2e10000000a1553f6/content.htm
    Business Service: http://help.sap.com/saphelp_nw70/helpdata/en/c7/301640033ae569e10000000a155106/content.htm
    Also,There is already lot of thread regarding the same discussion, please see it below.
    Business service or Business system??
    Re: Business Service <--> Business System
    Difference between Business service, Business system and Business process
    Business Service vs Business System in Integration Directory.
    Business Service (vs) Business System in Integration Directory.
    What is the difference between Business System and Business Service?
    business system and business service
    Diff b/w Business service & Business System?
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • What's different between busniess system and technical system in SLD?

    I can enter product(ect.ERP r/3) , components(ect.FI-CO module) to technical system , then enter technical system to busniess system  but ,who can explain  what's different between busniess system and technical system in SLD, exactly?
    THANKS!

    Technical Systems are of following types:
    Technical systems are application systems that are installed in your system landscape. An example of an application system is a Customer Relationship Management (CRM) server. In the SLD, there are five types of technical systems:
    1.)WEBas java,
    2.)Standalone JAVA
    3.)Third party
    4.)Web as ABAP
    1) Web AS Java
    Web AS Java systems consist of one or more instances and each instance is installed on a separate host. An instance itself consists of cluster nodes that can communicate with each other.
    2.)Standalone Java
    Standalone Java technical systems are standalone Java applications that are installed in a computer system from an administration perspective. They can also be installed as an operating system service or as a daemon
    Web AS java belongs to the NetWeaver Comes with both ABAP and Java, Standalone instread comes separate from the netWeaver.
    3) Third party technical sytem
    It can be any of the technical sytem. let us say if you want to send a file to R/3, here the file reside in your local system. for that you can define your local system as a third party technical system.
    All those machines that comes under non sap, belongs to the third party.
    4.) Web AS ABAP technical systems, ranging from any SAP system to an APO server or CRM server, are based on the same Basis Component (BC), which includes the ABAP interpreter, ABAP Dictionary, ABAP Workbench, and so on. A dedicated database, which stores most of the data of the BC and the application components, is associated with the system.
    Also refer : http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
    Business systems are logical systems, which function as senders or receivers within XI. Business systems can be SAP systems or third-party systems.
    Depending on the associated technical system, the following types of business systems are defined in the SLD:
    · Web AS ABAP
    A business system, which is associated with a Web AS ABAP.
    A business system, which is associated with a Web AS ABAP, can play the role either of an application system or an integration server. An integration server is the central component of XI, which provides a framework for the exchange of information among various internal and external entities of a company. The integration server facilitates the interaction between the different operating systems and applications across internal and external networks.
    · Web AS Java
    A business system, which is associated with a Web AS Java.
    · Standalone
    A business system, which is associated with a standalone Java application.
    · Third-party
    A business system, which is associated with a third-party technical system.
    http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm

  • Activating ABAP Proxy between business system and XI

    I have a question on the release of XI Add-on we need to install on the Business system side for activating ABAP Proxy. We are using XI 3.0 system and want to activate the ABAP Proxy between XI 3.0 system and the R3E system running on WAS 620 SP 45.
    I read an excellent SDN Blog from Vijaya Kumari on how to activate the ABAP Proxy. It lists XI Add-on installation on the business system. The XI Add-on (SAPK-20006INAPPINT SP06) is what the XI 3.0 configuration guide refers to in OSS note 439915. Is there a newer XI Add-on to go with XI 3.0 system?
    Thanks,
    Asif

    Hi Asif -
    SAPK-20006INAPPINT(SP06) is the latest XI add-on (APPINT 200_620) available.  Since your WAS 620 is on (SP45) and the prerequisite for SAPK-20006INAPPINT(SP06) is SAPKB62043, your system looks ready. But of course, refer to the mentioned Note - 439915.
    >>><i>Is there a newer XI Add-on to go with XI 3.0 system?</i>
    I'm not sure if this is the right question.  Any Web AS 6.20 system will require the XI-add on to communicate to XI (2.0 or 3.0) - specifically regarding proxies.  WebAS 6.40 systems do not require the add-on.
    Let me know if you need any clarification.
    Thanks.
    Jin

Maybe you are looking for