Retrofit issue

Hi Experts,
We have created TR in SE2:300 (SE2K900212) and after releasing it, we have got Transport Of Copies (SE2K900214). Now object which is relevant with Zpackage25 under this TR, we want that to move to SE2:200 client through automatic retrofit process, which we are trying to do.
But while doing this, it prompts us for error message saying TR in SE2:200 (SE2K900215) –“Choose a change request with target system SE2.400 “ and after checking logs it says- “However, the objects you edit can only be recorded in change requests with the target system SE2.400.
The correct target system is determined from the package and transport layer to which the object concerned belongs”
We don’t want target system of 200 to be changed to 400, 120 is correct client, but I believe Zpackage25 or relevant Transport layer having some issue in not recognizing this package ,
Can you please let me know how I will be able to take care of this?
Thanks,
Asad

Hi,
This is the complete scenario:
Our Solution Manager system DM2 is on Solution Manager 7.1 SP 07.We
have Connected our Solution Manager system to Satellite system SE2(ECC
System) and we have configured ChaRM in this Landscape for SE2
satellite system.
In our SE2 Satellite system, we have built "Implementation Landscape"
and "Maintenance Landscape" as below for Prototyping "Retrofit
Scenario".
Maintenance Landscape:
SE2/200(Dev) -> SE2/120(QA) -> SE2/110(Pre-Prod) -> SE2/100(Prod)
Implementation Landscape:
SE2/300(Dev) -> SE2/400 -> SE2/100(Prod)
We have followed the below steps for recreating "Auto-Import" Scenario
in Retrofit
1) Create a Transport Request in SE2/300 from Task List and save some
Example Objects in the same. The Task List has been created from the
Project containing the Logical Components of both "Implementation
Landscape" and "Maintenance Landscape" with SE2/200 being identified as
the "Retrofit" system.
2) Release the task of this Transport Request from the Satellite system.
3) Release this Transport Request from the Task List.At this stage,
Transport of Copies(ToC) is generated.
4) Create Transport Request in SE2/200 from the Task List.
5) Start "Retrofit" from the Task List.When performing this task,we are
receiving the following Error message after selecting the "Retrofit"
Transport request in SE2/200.
"Choose a Change Request with Target system SE2/400".
This is the error we are getting:

Similar Messages

Non standard issues - QGM and Retrofit

Quick question to all ALM experts - If we want to use retrofit after transports has been released in maintenance landscape and then if client realized that we need to have project landscape and retroft functionality. Is it feasible ? if yes definitely need manual changes, listing out objects etc?
Also, in QGM if transports are released to QAS and if we do not want to continue with the transports? what alternative options we have like continuing the same transport until PRD and then create new transport to nullify the transport ? or manually tweeking the code and do changes
I know above are not best practises but just want to know your thoughts on this if any.
Any suggestions from your side?
Thanks
Sateesh.

To clarify, you want to see this traffic go to the S170 but do not see any access logs is this correct?
Are you using WCCP? If so, you will need to configure WCCP to redirect port 44444. But with all honesty, for 1 website that uses that port; you might want to consider to just let that traffic out the firewall since the WSA will likely not scan this traffic.
-Vance

Retrofit in SAP Solution Manager 7.1 Supported Across Different OS's?

Is Solution Manager 7.1 Retrofit Capability supported with a different enhancement pack level and across different Operating Systems (HP-UX & AIX)?
The specific scenario would be setup of a dual landscape where traditional Dev -> QAS-> PRD is on HP UX 11.31. Then we would create a parallel 'Upgrade Project" landscape on IBM AIX 7.1 uDEV -> uQA (on AIX), perform an enhancement pack upgrade on uDeV and uQA and use Solution Manager Retrofit Capability to synchronize transports between the two landscapes.
Thanks in Advance!
-Patrick

Hi we are configuring Google SMTP getting below error..
No delivery to xxx.com, authentication required
Message no. XS856
Diagnosis
The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
Information from external system (if available)
smtp.gmail.com:587
530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
Procedure
Enter the logon data in the SAPconnect node.
Using Gmail SMTP server using "smtp.gmail.com" with port 587
Please advise.
Regards,
Sudarshan

Touch Screen Retrofit for iMac9,1 Screens

I am currently conducting research on virtual organs using the Hauptwerk/Classic MIDIworks systems. These are heavily dependent on touch screens. According to Darryl Wood of Classic MIDIworks " . . . there are a lot of switches inherent in organs. There's no way to implement that many physical switches, multiplied by all the different sample sets, practically or economically." This is why touch screens are recommended. That is to forgo the expense of independent drawknobs ($25 to $50 each) to say nothing of all the pistons, couplers, swell shoe displays and memory level displays that would cause a $7,000 organ project to drastically escalate in cost. I have found a retrofit in the form of the 3M MicroTouch System 3250EX. This is a surface capacitive touch system based on the 3M MicroTouch Controller EX and optimized for displays ranging from 6.4 to 32 inches.
If you do not recommend the 3M system, please send a list of touch screens and necessary connection hardware.

Hi @Bobi617 ,
Welcome to the English HP Consumer Forums!
Please feel free to post a revised message in English.
I understand you are having issues after a possible update on your HP Notebook and your touchscreen not responding. You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
Here is a document on troubleshooting the Touchscreen if the system restore does not help.
Thank you, and have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to insert entities for a role and retrofit single trigger from DB

Hi,
before Oracle Designer replacement I would like to clarify these 2 issues:
- how to insert entities for a role?
- how to retrofit just a single trigger from database?
Could somebody give a step by step advice, how to do these 2 things? Thanks!

> um.. i don't think you could use 'create table'
inside a pl/sql procedure.
You are wrong. You can create table inside a PL/SQL using execute immediate. But, this is not a good practise. I think you should reconsider the logic and then use such programming code. Please read the Oracle documentation regarding execute immediate.
Regards.
Satyaki De.

Not able to create a Task List for Charm Retrofit

Hi All,
we are trying to implement retrofit for our client. Created two projects one for implementation and one id maintenance and defined the system landscape for both.
I have checked the RFC connection for all the systems involved and all works fine. IMG projects are created successfully for both.
Problem comes when we are creating a maintanance cycle or task list after activating the change request management. We always get a logon screen after giving the name of task list and press ok. First we thought it could be the trusted RFC issue but trusted RFC for the current user is working fine.
Could anyone know what is the problem and if you faced the same issue pls share your experience what all did you try to rectify it.
Thanks
Tripti

Hi,
BC sets are active. I have already checked, it ended up in warning but its general we can avoid it. One thing which we found out was thi error when I am checking the application log for the project
System cancel RFC destination SM_GTDCLNT020_TMW, Call TMW_SET_PROJECT_SWITCHES: No authorization to change file /usr/sap/gttrans/a ctlog/GTDZP000XX.GTD
I don't understand what exactly is this error about but informed the authorization team regarding this.
Any idea?
Thanks,
Tripti

9/18/13 Software Update - WiFi Issue

I downloaded the latest software update (9/18/13) and now my macbook from April 2009 will not find or connect to any wi-fi networks. Other devices in the house including ipads, iphones and a new macbook air are connected and working fine. Tried restarting my router but nothing still....HELP!

Can you provide your model of W520?
Is your Nvidia graphics one of the following:
NVIDIA NVS 4200M              NVIDIA NVS 4200M
NVIDIA Quadro 1000M         NVIDIA Quadro 1000M
NVIDIA Quadro 2000M         NVIDIA Quadro 2000M
===
DETERMINING WHICH VERSION IS INSTALLED
1. Select Start.
2. Right-click/Press and hold Computer, and then select Properties.
3. At the left pane, select Device Manager.
4. Double-click/Double-tap the Display adapters category.
(NVIDIA Graphics Driver)
5. Double-click/Double-tap either of the following devices.
       NVIDIA NVS 4200M
       NVIDIA Quadro 1000M
       NVIDIA Quadro 2000M
6. Select the Driver tab.
7. Check Driver Version via the driver details tab. You probaby have the Lenovo version
8. Click the update driver tab. Search automatically. Update the version windows(online) wants to use.
  9. State this version.
==
More than likely NVIDIA has issued a newer version, via windows, then what Lenovo is aware of.
Lenovo with have to change SU .xml logic to deal with this.
==
This is just to help someotherguy provide a Lenovo solution.
Hiding the SU offering is the best solution. Lenovo normally does not retrofit SU.xml due to newer release showing on Windows update via another vendor.

Initial sync issues on multiple devices (sloppy timing)

I'm running logic 9 64bit in snow leopard on a mac pro 2.3 nehalem dual quad w 14 gigs ram. (which I'm still paying off) I have a MOTU express 128, a pile of dusty analog things and NI's Maschine running as per NI's support team's advice, in stand alone slaved to logic via midi clock through IAC 1. The problem is that I cant seem to get everything synched up quite right. I tried listening to the click outs from logic and maschine and beatmatching w the midi out offset in logic's preferences. That works for the instant I get it 'on' but then when I press stop and play again, it has to be readjusted. Seems to want to be anywhere between -30 to -20ms but if its even a little off, the whole thing sounds like trash. Feels a clock signal inconsistency or something. (?) Secondly, when the Maschine is synched for the minute, the outboard synths are a lil off. Further complicating, my two Midi/CV converter systems have a slightly different latency, AND one synth (a retrofit) accepts midi note, pitch-bend and mod-wheel data but goes fruggun haywire when it hears clock or timecode.
Anyone have a systematic process for getting the audio and multiple midi devices all synched up? I come from MPC land so you'll have to speak slowly and use small words.
thanks!

Yup, apparently NI isn't real good w AU programming. Lots of hiccups when running in Logic. Timing goes BONKERS, and sample rate falls off the wagon. The 'within logic work around' is to reset the audio buffer and device settings every five minutes after it fails. (barf) Are you saying there's an inheriant issue w synch via IAC? I'd really like to start w audio I/O/I/O lag offset, which I'm pretty sure is the first step. It's gotta be around here somewhere...

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

Pension issue Mid Month Leaving

Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
Ashwani

Dear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis              01/2010                    0.00           8,750.00
/139 VPF Basis              01/2010                    0.00           8,750.00
/3F1 Ee PF contribution     01/2010                    0.00           1,050.00
/3F3 Er PF contribution     01/2010                    0.00             509.00
/3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00
/3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25
/3FA PF basis for Ee contri 01/2010                    0.00           8,750.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3F4 Er Pension contributio 01/2010                    0.00             541.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
1BAS Basic Salary           01/2010                    0.00           8,750.00
RT table for year 2009. DOL 27.10.2009
                                                                                /111 EPF Basis              07/2009                    0.00           9,016.13
/139 VPF Basis              07/2009                    0.00           9,016.13
/3F1 Ee PF contribution     07/2009                    0.00           1,082.00
/3F3 Er PF contribution     07/2009                    0.00             628.00
/3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
/3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
/3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FC Pension Basis for Er c 07/2009                    0.00           5,452.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13
1BAS Basic Salary           07/2009                    0.00           9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani

Open PO Analysis - BW report issue

Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM     DOC_ITEM      DOCTYPE     COMP_DEL
650000001       10     UB        X
650000001       20     UB        X
650000001       30     UB
650000001       40     UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampath

Hi Priya and Reddy
   Thanks for your response.
                     Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                    I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                   In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
    41               6500000001            30                    11                            X           ---
    42               6500000001            30                    11                            ---           X
    43               6500000001            30                    10                            X           ---
    44               6500000001            30                    10                            ---         ---
(Here --- means blank)
Thanks and Regards
sampath

HP LaserJet Enterprise 600 M602 driver issue

Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
Anatoly

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows 7 displays error message when exiting +cursor issue

Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Doug

function(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel

Issue in Creation of Periodicals for Contracts in CRM7.0

Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
Dedeepya

Hi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C

Issue in creation of plant related data at receiving server using BD10

Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05                      matmas05
       E1MARAM                        Master material general data (MARA)
           Z1KLART                        KLART----
My extention
           E1MARA1                        Additional Fields for E1MARAM
           E1MAKTM                        Master material short texts (MAKT)
           E1MARCM                        Master material C segment (MARC)
               Z1AUSPM                        E1AUSPMDistribution of Classification:----
My extention
               E1MARC1                        Additional Fields for E1MARCM
               E1MARDM                        Master material warehouse/batch segment (MARD)
               E1MFHMM                        Master material production resource/tool (MFHM)
               E1MPGDM                        Master material product group
               E1MPOPM                        Master material forecast parameter
               E1MPRWM                        Master material forecast value
               E1MVEGM                        Master material total consumption
               E1MVEUM                        Master material unplanned consumption
               E1MKALM                        Master material production version
           E1MARMM                        Master material units of measure (MARM)
           E1MBEWM                        Master material material valuation (MBEW)
           E1MLGNM                        Master material material data per warehouse number (MLGN)
           E1MVKEM                        Master material sales data (MVKE)
           E1MLANM                        Master material tax classification (MLAN)
           E1MTXHM                        Master material long text header
           E1CUCFG                        CU: Configuration data
       E1UPSLINK                      Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PM

CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?

Retrofit issue

Similar Messages

Maybe you are looking for