RetroPay (Enhanced) on grade step point value

Hi,
Retropay(Enhanced) picks everyone from the BG after I enter "pay_grade_rules_F" in the "Retro Notification" event group and change 1 point value. However, I just change ONLY 1 point value. Is that any means to pick those employees with that point value ONLY?
Thanks
Desmond

Similar Messages

How to setup Grade Scale and Point Values

Dear Friends,
We are Implementating HRMS for one of the client in Middle East. I was stuck up in setting up of Grade...
Grade Pay Scale
Grade Point Values
Grade Steps and Points
Grade Progression Approval
How to setup the above things, can anyone pls help me on this
with regards
Swpana

hi,
Please check metalink note 455103.1 which will start out with providing viewlets (flash files) to show you how to use the Grade Step Progression functionality in Oracle HRMS with all the needed setup.
you can download all of these flash files to your pc.
this note has been recently added into Metalink.
Good Luck,
Mohammad AL-Hourieh

Increment Progression Points not update Grade/Step Progression

Dear,
We are on r12, Without using Grade Ladder.
Right now we have setup all configuration like grad, Rate, pay scale, Point values and grad step and points, also attache with employee but when we run request increment there is not move to the next grade steps.
Thanks

Hi Gaurav
Just solve the problem->
I was doing this in my api: P_EFFECTIVE_DATE => TO_DATE(L_CUT_OFF,'DD-MON-YYYY')
So I removed the date format: P_EFFECTIVE_DATE => TO_DATE(L_CUT_OFF) then it worked.
What a misguiding error it gave!!!!!!!!!!!!!! for invalid primary key
Regards
- Saira

Grade step value proration

Hi
IF there is a change in the grade step in the middle of the month,how we can prorate the basic salary between the previous grade and the new one?
Please any idea
Thank you and Kind regards

Hello,
Is your issue resolved ? Kindly please flag my answer if it was helpful.
Thanks
Gaurav

RetroPay (Enhanced) query

Hello we are using RetroPay (Enhanced) UK legislation but it always creates headache in each run.
I need one suggestion.
We have a Pay element (A) that is an indirect result of an Information element (B) which is an indirect result of another element (C).
A is an earnings and B and C are Informatiom element. Only C can be atached to the employee.
We have created an Arrears element for A. Now if i attach C retrospectively do i need to create and add Arrears element in the recalculation tab for element B and C too?

It depends on what you need -
If you're just looking for element entry value change then -
Datetrack Correction PAY_ELEMENT_ENTRIES_F EFFECTIVE_END_DATE
Datetrack Update PAY_ELEMENT_ENTRIES_F EFFECTIVE_END_DATE
Datetrack Correction PAY_ELEMENT_ENTRIES_F EFFECTIVE_START_DATE
Datetrack Update PAY_ELEMENT_ENTRIES_F EFFECTIVE_START_DATE
Datetrack Update PAY_ELEMENT_ENTRY_VALUES_F SCREEN_ENTRY_VALUE
Datetrack Correction PAY_ELEMENT_ENTRY_VALUES_F SCREEN_ENTRY_VALUE
If you're also looking for other changes -
Datetrack Insert PAY_ELEMENT_ENTRIES_F
Datetrack Delete PAY_ELEMENT_ENTRIES_F
Datetrack End Date PAY_ELEMENT_ENTRIES_F
RetroPay(Enhanced) works the same way as normal Payroll.
What it does is imitate the normal payroll with the new value.
Say, the Annual Salary element is updated as of June. The system would recalculate the Payroll for each of the previous months with the new value and then compares it with the old values, then creates the retro elements with the difference.
Hope that helps,
Cheers,
Vignesh

How will Aperture treat Nikon raw images which have been enhanced using Capture NX2 software? Some are cropped and "developed" and some have been enhanced using the control point technology. I have NIK sw as a plug-in in aperture.

How will Aperture treat Nikon raw images which have been enhanced using Capture NX2 software? Some are cropped and "developed" and some have been enhanced using the control point technology. I have NIK sw as a plug-in in aperture.

Actually, there is a Nik/Nikon connection — but I am pretty sure it is irrelevant to the OP's question. The connection is that Capture NX2 was written as a joint venture between Nikon and Nik. (The name similarity is a coincidence.)
Capture NX2 is a cool program that incorporates the features of Nik's Viveza and Nikon's Raw processing engine, along with some other powerful image adjustment features. It provides, like Aperture, a losses workflow. Unlike Aperture, the adjustments (Edit Steps in C-NX terminology) are saved in the original NEF file along with the un-altered raw data. Multiple versions can be saved in a single NEF.

How do I create a line that is established through two Point values?

I'm given a number of fields and methods that must be used to establish a line that crosses through two Point values. This is a bit confusing because Point is also a class in the API, so I'm not sure where to begin with the given attributes and operations I have at hand:
public Line (Point Start, Point End) {..}
public boolean isHorizontal() {...}
public boolean isVertical() {..}
public void move(int x, int y) {...}
public void display() {...}
private Point theStart;
private Point theEnd;

@misty:
There is a big, bold announcement at the top of this forum that reads as follows:
BEFORE YOU POST A TOPIC HERE: Please be sure your topic is related to features or functionality of this site. This forum is not for general technology questions. Not sure which forum to use? Try searching for your topic in the "Search Forums" element on the left panel. See Known Issues to get information on issues we know about and are actively working on to improve your forums.sun.com experience.
That announcement is also at the top of the screen where you wrote your post.
There is also a sticky announcement thread at the top of this forum (http://forum.java.sun.com/ann.jspa?annID=34). The subject of that thread is "Before you post a topic here - This area is NOT for general technical questions". If you read that thread, it will tell you much the same thing as the announcement.
Apparently, you missed (or chose to ignore) all three attempts to urge you to not post general technical questions to this forum. I encourage you to read them and please follow their instructions. Doing so will help you get better, faster answers to your questions, as well as keep the regular forum members from jumping down your throat for not paying attention.
Please don't reply to this thread. Good luck.
~

FR 9.3.1 - Show point values doesn't work properly

Greetings,
I'm experiencing a strange trouble with the show point values function in charts like Bar, Line or Combo Chart types.
The values diplayed are rounded to the nearest value, even if the grid show decimal values.
I didn't find any solution to this, maybe anyone knows how to fix it?
Thank you very much for your support.

There is a work around, note that this is not supported/approved by Oracle as it involves actually changing the report xml. So at your own risk:
# You need to export the FR reports;
# Then open in a text editor;
# Search for the current format (it should be '%,d', with the single quotes);
# Replace with the format you want, for example to get one decimal place with 000's separator '%,8.1f'
Formatting types/descriptions:
bq. %g example 1234.456 \\ %f example 1234.46 \\ %,f example 1,234.46 \\ %d example 1234 \\ %,d example 1,234 \\ %8.1f example 1234.5 \\ %08.1f example 001234.5 \\ cost=$%,.1fM example Cost=$1,234.5M
To add this for the second Y axis, you actually need to do more work:
# Within the exported .DES file, Search for <CHARTOBJECT
# Then search for OBJECT_WIDTH (There are OBJECT_WIDTH parameters for objects other than charts, which is why we start at the Chart section first.)
# 1.Add the following parameters after OBJECT_WIDTH: \\ OTHERPROPERTIES=”RightFormat=(FLOAT, '%,8.1f')” \\ *** IMPORTANT: The %,8.1f is surrounded by single quotes;

Precision loss - conversions between exact values and floating point values

Hi!
I read this in your SQL Reference manual, but I don't quite get it.
Conversions between exact numeric values (TT_TINYINT, TT_SMALLINT, TT_INTEGER, TT_BIGINT, NUMBER) and floating-point values (BINARY_FLOAT, BINARY_DOUBLE) can be inexact because the exact numeric values use decimal precision whereas the floating-point numbers use binary precision.
Could you please give two examples: one where a TT_TINYINT is converted to a BINARY_DOUBLE and one when a TT_BIGINT is converted into a DOUBLE, both cases give examples on lost precision? This would be very helpful.
Thanks!
Sune

chokpa wrote:
Public Example (float... values){}
new Example (1, 1e2, 3.0, 4.754);It accepts it if I just use 1,2,3,4 as the values being passed in, but doesn't like it if I use actual float values.Those are double literals, try
new Example (1f, 1e2f, 3.0f, 4.754f);

Reduce Question Point Value with Each Guess

Hello All,
I'm attempting to create a quiz in Captivate 5.5 with 26 multiple choice questions. The catch is that the more attempts it takes to get the right answer, the less points they earn for that question. For instance, if they come to the question and get it right on the first try they get 4 points. If they get it on their 2nd guess they get 2 points. If they get it on their 3rd guess they get 1 point. After that they earn 0 points.
I also need to send SCORM results to an LMS. All I need in those results is the total points scored.
I've thought of a few different ways to attack this, but neither is very elegant. The first was to create Possible Points and Earned Points variables. The Possible Points variable was reduced by the appropriate amount after a wrong guess and added to the Earned Points variable and reset to 4 after a good guess. This would have worked, except I didn't know how to have the project report the Earned Points variable to the LMS instead of (or in addition to) the system variable cpQuizInfoPointsscored.
The other way was to make as many duplicate slides for each question as there were possible answers. The only thing different on each slide would be the question point value. The person gets it wrong, they go to the next slide, which is worth less, rinse, repeat. The person gets it right, they jump to the first slide of the next question. This would work, using the system variables, but editing any questions later would be cumbersome.
This is my first captivate project, so hopefully I am just missing some easy setting. I couldn't find anything in my many searches, though. Any gurus have a thought on how to do this?
Thanks in advance for the help!

The problem is that the score for every question slide, or for every scored object (like a button) will be added to the total score. You can perfectly store the result in a user variable, but the system variable cpQuizInfoPointsscored is a read-only variable. I have been trying to explain this issue in a blog post:
Report Custom Questions - part 1
Lilybiri

Data point values on charts

How can I display data point values on the chart? They show
on hover but I need them on a printed version.

Use the dataLabelStyle attribute of cfchartseries.
For example:
dataLabelStyle = "value"
See:
http://livedocs.macromedia.com/coldfusion/7/htmldocs/00000228.htm

Enhancement spot for shipping point in VL10G tcode

Hi All,
we have created enhancement spot for shipping point in VL10G tcode & tested its working fine in foreground(Dialog) but didn't worked in BACKGROUND, its showing error log.
when we opened this error message its not having any error message in log. its coming blank in error field.
so pls let me know your thoughts, why its happening?
Thanks & Regards
Nagendra / Biswa

hi yogendra,
I have created an enhancement in RV_INVOICE_DOCUMENT_ADD but my code is not getting appeared in debugging mode and nothing is working. can u please guide me on this.
following the spot where i have written my code
NHANCEMENT-POINT rv_invoice_document_add_14 SPOTS es_saplv60a.
ENHANCEMENT 51 OIC_SAPLV60A.    "active version
BREAK-POINT.
WAIT UP TO 2 SECONDS.
DATA: lv_name TYPE thead-tdname,
         lt_line TYPE STANDARD TABLE OF tline,
         lw_line TYPE tline.
     CLEAR: lv_name , lv_sgtxt.
       lv_name = bkpf-xblnr.
CALL FUNCTION 'READ_TEXT'
     EXPORTING
       id                      = 'A002'
       language                = sy-langu
       name                    = lv_name
       object                  = 'VBBK'
     TABLES
       lines                   = lt_line[]
     EXCEPTIONS
       id                      = 1
       language                = 2
       name                    = 3
       not_found               = 4
       object                  = 5
       reference_check         = 6
       wrong_access_to_archive = 7
       OTHERS                  = 8.
   IF sy-subrc EQ 0.
     READ TABLE lt_line
       INTO lw_line
       INDEX 1.
      REPLACE ALL OCCURRENCES OF '<)>' IN lw_line-tdline WITH space.
     lv_sgtxt = lw_line-tdline.
   ENDIF.
ENHANCEMENT 1 ZNARRATION_UPDATE.    "active version
ENDENHANCEMENT.
Regards
satish

Floating point values

Hi all;
Please help.
I am getting floating point values in my source IDoc like 1.234- but while inserting into the ODS system i need the negative sign before 1.234.
How to achive this out.
Nalin

Hi
You can achive this by using graphical mapping UUser defined function.
Mapping source fieldremove context UDF --- target field
UDF
for(int i=0;i<Float.length;i++)
if(Float<i>.endsWith("-"))
result.addValue("-"+Float<i>.substring(0,Float<i>.length()-1));
else
result.addValue(Float<i>);
Mudit
Award points if it helps

Passing floating point values, but being recognised as doubles and int's?

Hi,
I was wondering how to differentiate between floating point values and ints etc
I am passing values into a public class with the parameters (float... values)
Public Example (float... values){}new Example (1, 1e2, 3.0, 4.754);
It accepts it if I just use 1,2,3,4 as the values being passed in, but doesn't like it if I use actual float values.
How come?
Cheers

chokpa wrote:
Public Example (float... values){}
new Example (1, 1e2, 3.0, 4.754);It accepts it if I just use 1,2,3,4 as the values being passed in, but doesn't like it if I use actual float values.Those are double literals, try
new Example (1f, 1e2f, 3.0f, 4.754f);

Assignment screen audit report with grade steps included

I want to create a report such that when ever a start date and end date parameters are passed to this report it will display the output of all the details on the employee's assignment screen.
for example if there has been any change in the grade or staus or payroll and grade step for this assignment (changes were done between JAN to MAR 2010)then the report must display it in the output the update that was made to the field (that is one column will be data before change and the other column would be lets say data after change (Eg. Start Date =01-JAN-2010 and End Date= 31-MAR-2010). The report query that i want is some what similar to the functionality of APPS "Date Track History" but in my report i want only to view the history between the dates passed in the parameters (i.e 01-JAN-2010 to 31-MAR-2010) .
Please help!

Try query of something like below. Recheck the Outer joins.
SELECT <Columns>
FROM per_all_people_f papf,
per_all_assignments_f paaf1,
per_all_assignments_f paaf2
pay_all_payrolls_f ppa1,
pay_all_payrolls_f ppa2,
per_assignment_status_types past1,
per_assignment_status_types past2
WHERE papf.person_id = paaf1.person_id
AND papf.person_id = paaf2.person_id
AND paaf1.assignment_id = paaf2.assignment_id
AND paaf1.payroll_id = ppa1.payroll_id (+)
AND paaf1.assignment_status_type_id = past1.assignment_status_type_id
AND paaf2.payroll_id = ppa2.payroll_id (+)
AND paaf2.assignment_status_type_id = past2.assignment_status_type_id
AND (NVL(paaf1.payroll_id,-1) <> NVL(paaf2.payroll_id,-1) OR paaf2.assignment_status_type_id <> paaf1.assignment_status_type_id)
AND paaf1.effective_end_date = paaf2.effective_start_date + 1
AND paaf1.effective_start_date BETWEEN papf.effective_start_date AND papf.effective_end_date
AND paaf1.effective_start_date BETWEEN ppa1.effective_start_date AND ppa1.effective_end_date
AND paaf2.effective_start_date BETWEEN ppa2.effective_start_date AND ppa2.effective_end_date
AND paaf1.effective_end_date BETWEEN :pStartDate AND :pEndDate
UNION ALL
SELECT <Columns >
FROM per_all_people_f papf,
per_all_assignments_f paaf,
per_spinal_point_placements_f pspp1,
per_spinal_point_placements_f pspp2
WHERE papf.person_id = paaf.person_id
AND pspp1.assignment_id = paaf.assignment_id
AND pspp2.assignment_id = paaf.assignment_id
AND NVL(pspp1.step_id,-1) <> NVL(pspp2.step_id,-1)
AND pspp1.effective_end_date = pspp2.effective_start_date - 1
AND pspp1.effective_start_date BETWEEN paaf.effective_start_date AND paaf.effective_end_date
AND pspp1.effective_start_date BETWEEN papf.effective_start_date AND paaf.effective_end_date
AND pspp1.effective_end_date BETWEEN :pStartDate AND :pEndDate

RetroPay (Enhanced) on grade step point value

Similar Messages

Maybe you are looking for