Retrun delivery for STO

step i have performed.
1. created STO with document type UB and then marked the return PO check box at item overview level
2. went to Vl10d created a delivery with it
3. now trying to do PGI but getting the below error.
Update control of movement type is incorrect (entry 161 X X _ L)
     Message no. M7226

Copy the entry in question in table T156S for movement type 102 to movement type 161. Use Transaction SM31 "Table maintenance" -> T156S Maintain ->
      Mvt   VUp  QUp   S     Mvt   Rec   Cns   VStr  QStr  ....
      102   X     X     Q     F           P           MF07  ....
-> in field "BWART" enter value 161 accordingly and confirm afterwards by pressing Enter -> the "new" entry should now be available and as follows:
      Mvt   VUp  QUp   S     Mvt   Rec   Cns   VStr  QStr  ....
      161   X     X     Q     F           P           MF07  ....
Edited by: Amit Kumar Pandey on Jan 16, 2011 7:48 AM

Similar Messages

  • Delivery Split during creation of delivery for STO

    While creating a delivery for STO, delivery is being created for individual line items. On analysis of VL 033 message, I found that the delivery split is happening because of Function SH: Unloading Point.
    The message is
    <i>"delivery split due to conflicting header data (Function SH: Unloading Point: <-> UP0065)"
    Item 000020 cannot be shipped in the same delivery with the other items in the document because the header data (Function SH: Unloading Point) is different. The Function SH: Unloading Point item field has the value UP0065, but in the delivery checked for concatenation it has the value .</i>
    This unloading point has been maintained in the customer master data (and needs to be maintained).
    I have also been told by my Basis consultant that note 842704 is not valid.
    Why is this happening and how to prevent it.
    Lakshman

    Sorry... but I could not see either the delivering point or the unloading point in the material sales: general / plant view. Those fields are not visible on the screen. I could also not find them in the config (I was checking if they are suppressed).
    Regards,
    Lakshman

  • Out bound delivery for STO

    Hi
    In stock transfer order in delivery tab part Del/Item tab it is mentioned "B" means it will create only one outbound delivery  for sto. if stock is not available it will create deliver y with quantity 0.
    But for 1  sto it has created 3 out bound deliveries.
    Why it is happened?
    Thanks,
    Kiran

    Hi
    To check the possible reasons of splitting, see these notes:
    SAP Note 166397 - Delivery split according to customer field ZUKRL
    SAP Note 546668 - FAQ: Delivery split when creating deliveries
    I hope this helps you
    Regards
    Eduardo

  • VL10B - Creates delivery for STO after delivery date

    Hi All,
    VL10B batch job is scheduled to create delivery for STO automatically when stock is available (availability check 02).
    batch job creates late delivery though sufficient stock exist
    For ex. STO is created on 27 Aug 14 having delivery date 31 Aug 14. (STO is having only one line)
    VL10B batch job having delivery date as <= current date + 1.
    logically batch job should create delivery on 30 Aug 14 but in my case it is created on 07 Sep 14.
    Please help me to understand the cause of this.
    Appreciate quick response
    Regards,
    Anil Patel

    Hi Anil
    See note
    1245447 - Avail. check for deliveries that are created automatically
    "After you implement the corrections, the availability check is only deactivated when you create the delivery automatically. If you make changes to the delivery afterwards, the system runs the availability check.
    The availability check is deactivated for the automatic creation of deliveries for technical reasons."

  • Alternative way to create delivery for STO

    Hi all,
    Is there an alternative way to create a delivery for STO aside from going to tcode VL04?
    Thanks!

    >
    AA wrote:
    > Hi
    > You may try VL10B.
    >
    > Regards
    > Amitesh Anand
    Hi,
    Thanks for the info.
    Can you give some overview on how to use it?
    Thanks!

  • Is it possible to create an inbound delivery for STO in a 2 step process ?

    Hi Experts,
    Is it possible to create an inbound delivery for STO in general (how do I get a vendor for a Plant. I have already assigned a plant to my vendor in vendor master - additional purchasing data, but it does not seem to work).
    In particular if I want to create an inbound delivery in intra-company plant STO scenario, how do i do it?
    Let me know in case if that is not possible.
    Thanks,
    Nitin

    Hi Tao,
    I did that also, but it did not work.
    Finally I had to debug, and found that the for the document type UB (intra-company transfer) i should make the customizing setting which makes the vendor data to be considered. (Table T161).
    Anyways, thanks for your help.
    Regards,
    Nitin

  • Unable to create delivery for STO between different stroage locations

    Hi,
    i created PO for STO between differen storage locations belonging to the same plant.
                 At the time creating PO iam getting warning message " Of material RM-999999, only 0 KG are available on desired     
                 date". what could be the reason?
    when iam doing vl10b, PO is displaying but when iam selecting the PO line and clicking on the background button it is not generating any delivery document number and it is not showing any errors?
    can any one help on this.

    Hi Praveen,
    While executing VL10B, you are actually planning to create outbound delivery for STO PO.
    The STO PO will be due for delivery on that date and hence PO is displayed in the transaction.
    The error message specified by you means on the due date of delivery, there is no material quantity exists at supplying storage location. This could be because no quantity exists in storage location or there could be some reservations available for available quantity or some other quantity is booked under some other outbound delivery document on or before that date.
    Check for stock on posting date via t-code MB5B and proceed accordingly.
    Hope this resolves your problem.
    -Ravi

  • Outbound Delivery for STO

    Hi,
    For creating a outbound delivery for STO(Its like PO and not against Sales Order) i used VL10B?
    Is there any other transaction codes for the same?
    Pls help
    Thanks
    Ram

    Hi,
      Try using VL10G and choose purchase order tab..This is almost the same transaction as VL10B..
    Thanks,
    Naren

  • Error while creating the delivery for STO

    Hi,
    While creating the delivery, an error is produced when i saw the log . It was as follows
    "An Item with no delivery quantity is not permitted. Item will be deleted"
    Its related to STO,. if STO contains around  100 items and error is for any single item system is not able to create the delivery for whole PO.
    Please guide as its an vey urgent issue will reward with suitable points.
    Regards,
    Vikram

    Hi
    while creating  delivery make that particular material's delivery quantity as 0. and do not  enter any picking quantity.
    that material will not be consider while making delivery.
    Regards,
    vijay

  • Create delivery for STO line item

    Hi All,
    My requirement is to allow creating delivery for Stock transfer Order(STO) line items which are
    not in blocked status even though some line items are in blocked status.
    Right now the logic checks if entire PO is in blocked Status using FM-- /SAPSLL/CD_STATUS_GET in method CHANGE_DELIVERY_ITEM of interface IF_EX_LE_SHP_DELIVERY_PROC
    But this FM does not contain PO item parameters. I need to incorporate item level checking logic.
    Are there any SAP notes available to fix this problem?

    Hi All,
    Any clues on this?

  • Hi Reg VL10B (outbound delivery for STO)

    Hi All,
    Can any body tell me what exactly the functionality of VL10B(Purchase orders fast display) What exactly this Transaction do and also If I want to create outbound delivery for my STP which I have crated how to do this using this Transaction?
    Thanks&Regards
    Mahesh

    Hi Mahesh,
    Tcode: VL10B, through this transaction, system will display the purchase order that are to be converted to deliveries depending on the inputs you have given in the selection screen.
    Select the respective purchase order and click on background (Creates delivery in background) and click on show/hide delivery. This way the system will create a delivery for the STO. When you click on the delivery number, system will takes you to VL03N transaction, there go to VL02N, input the picking quantity and then do the PGI.
    Hope this clarifies.
    Thanks,
    Viswanath

  • Error in creating delivery for STO

    Hi SAP Gurus !!
    I have these errors while trying to create delivery for a Stock Transport Order between 2 plants using transaction "VL10F"
    APO: Check instructions YA / BE does not exist for loca tion product PFSIND_SM_TEST_FCO / 2383
    APO: Check mode YA and business event BE not defined                                         
    APO: Internal error: Item $ 1/000001                                                         
    Only 0,00 PC of material PFSIND_SM_TEST_FCO available                                        
    An item with no delivery quantity is not permitted. Item will be deleted.                    
    I have chcked that there is sufficient stock available at the storage location level in the supplying plant.
    Can you please help me out of this please......

    Dear,
            Please try to check whether some STO is still pending for do complete process. If there is any pending STO then stock is block for this material.
    Regards,
    Sandip Shaktavat

  • Create delivery for STO forcibly

    Hi All,
    I have to create a delivery for one STO. Currently system has got stock, but it is allocated to some other orders. System is confirming this in future. I am getting the committed date in future. I still want to create delivery forecibly for this PO right now.
    How would i do it?
    Sachin

    Pls do "Rescheduling" for the sales orders.
    Rgds
    Sumanth.G
    Consultant/Systems Analyst- SAP SD/MM

  • Issue During Outbound Delivery for STO Purchase order

    Hi,
    Delivery Quantity is not picking automatically in VL10B, while creating outbound delivery with STO purchase order with account assignment ''Q'' Project (with WBS element). Stock also available in the supplying plant as shown the below screen shot.
    MMBE:
    Please do the needful.
    Thanks,
    Ashok

    Hi Pardhu,
    Thanks for your response.
    We don't have any open reservations and safety stock available for the material. Kindly go through below screen shot for your reference:
    Thanks,
    Ashok

  • Unable to create outbound delivery for STO??

    Hi All,
    I am trying to create an outbound delivery for a cross company code stock transport order, but when I try to do so in Txn VL10B the system does not create any.
    What I have observed is that in the STO I do not get any delivery creation date in the shipping tab. the system is not determining delivery creation date.
    Does anyone have any idea why it is so? Why the system is not able to determine the dleivery creation date? I have tried by creating STOs for many materials, but none works!
    Regards,
    V S

    Hi
    Pl check the settings:
    Below is the sto check list:
    Check all your settings once again for creating inter-company billing:
    - Material should exist in both plants.
    - Stock will be maintained in D-Plant (Delivering).
    - Now Plant - R (Receiving) become the customer of Plant-D.  So create a dummy customer in Plant-D's company code and sales area.  
    - Assign this customer number to Plant -R's details & its selling sales area.
    - Maintain the intercomapny billing type (IV) in ur sales doc type (OR).
    - Assign the Plant-D to selling sales org+ dbt channel.
    - Maintain relevant copy controls between documents.
    by doing all this then create po and check wheather do u got the shipping tab in the purchase order, if yes then replenishment del will be created.
    With Regards
    baalakrushnan.da

Maybe you are looking for

  • Error while trying to retrieve text for error ORA-03113"

    We face an error saying "Error while trying to retrieve text for error ORA-03113" in our Mail trigger application. This error happens randomly This is the below error i am getting I see from the logs DBD::Oracle::st execute failed: Error while trying

  • Finding new solution for Exchange Server

    We are a three-man operation and since 2007 have had an HP Proliant ML110 running Microsoft Windows Server 2003 for SBS SP2. I think it's time to replace the server but the prices of the hardware seem to have increased dramatically and I've had a quo

  • 1 input msg, 2 output files

    Hi Everyone:   The scenario is as follows, I have an input msg which looks like this: <ACCOUNT>   <HEADER>   </HEADER>   <DETAIL>          <---  occurence 1:unbounded   </DETAIL> </ACCOUNT> and somehow after doing the necessary mapping, etc I need to

  • How can I get Aperture 3.4 to support Sony NEX-5N RAW format photos?

    I've upgraded all software and my camera -- Sony NEX-5N -- is on the Aperture list for RAW format support, but it continues to show images shot in RAW as a black square with FORMAT NOT SUPPORTED! in the middle. Is there a setting I'm overlooking or w

  • Two computer confusion

    hello. i had to send an MG3222 back because it was faulty. so they sent me  an MG3520. should i uninstal the 3222 or what?? i tried installing the CD for the 3520 but i don't see its avatar anywhere on screen or any info at all. what should i do?