Return code errors 4,8,12

hi
    what are return code errors 4, 8, 12 can any one explain me
Please search the forum before posting a thread
Edited by: Pravender on Aug 18, 2011 1:42 AM

hi Gersh,
I checked in dev system, infoObject /CPMB/NUD8H9B and its' attribute/CPMB/MBRSEQ. Both are active and  infoObject /CPMB/NUD8H9B  is under infoarea "custom appset".
But if i check it in target system both are inactive status and  infoObject /CPMB/NUD8H9B  is under unassigned node infoarea.  
When i tried to activate infoobject via sap program, system couldn't do that and saying attribute is not in active state. Like wise several /cpmb/xxxxxx infoobjects are in status "inactive".
Do i need to activate standard appshell via ujs_activate_content program in order to activate all /cpmb/xxxx related infoobjects.
Or can i follow method of delete custom appset from target system and  shadow table contents in source system. Then freshly creating new req in dev system. Is this solves my problem?
any suggestions pls.
thanks

Similar Messages

  • Traport importing problem with repeating return code error 8

    Hi all,
    We are facing some transport import problem.When we sent transport initially AAA900244,they faced with return code error 8 and syntax error 109.As the information provided by the client,one of the include  program which is not availble at client system that was included in this transport.So that was the problem.Again we have taken  new  tranport AAA900247 without this include program then same type of error message they faced with return code error 8 and syntax error 109 in the include program when imported.
    I have one doubt, when importing new transport this should overwrite the earlier transport data.Why the same type error client is getting.What might be the reason.
    Is earlier transport  imported?? Why it throwing same type error.What actually the fuctionality of Return code 8 whether it is imported or discarded.
    Thanks in advance.
    Regards.....Balu

    Hi Ramesh,
    That include is not at all required at client system.So next time when we have taken transport we have not included this include program.They imported new transport without this include program.But they are facing same error as they faced first time. What could be reason??
    Regards...Balu

  • "Wrong process return code" Error which using OS Command

    Hi,
    I want to execute a shell script in unix which calls a sed script and input to the script is an xml file. I am using OS Command tool to call the script which fails with "Wrong process return code" error. I ran the command directly on UNIX box and works fine but fails when executed through a package in ODI.
    The command I am passing in OS Command window is as follows:
    /test/callSed.sh emp.xml
    I also tried ODIOSCommand but getting the same error. The shell script has execute privileges for all users. Is there any other property to be set up for running shell scipts through ODI?
    Appreciate you response.
    Thanks!

    Hi,
    Thanks for a quick response.
    I tried both the commands you sent. "sh ./test/callSed.sh emp.xml" threw Wrong process return code error and "./test/callSed.sh emp.xml" threw the following error:
    java.io.IOException: Cannot run program "./test/callSed.sh": java.io.IOException: error=2, No such file or directory
         at java.lang.ProcessBuilder.start(ProcessBuilder.java:459)
         at java.lang.Runtime.exec(Runtime.java:593)
         at java.lang.Runtime.exec(Runtime.java:431)
         at java.lang.Runtime.exec(Runtime.java:328)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execOsOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execOsOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.g.G(g.java)
         at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
         at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
         at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
         at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrdersIntegratedFunction(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.g.A(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: java.io.IOException: java.io.IOException: error=2, No such file or directory
         at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
         at java.lang.ProcessImpl.start(ProcessImpl.java:65)
         at java.lang.ProcessBuilder.start(ProcessBuilder.java:452)
         ... 31 more
    Regards,
    Aks

  • Transport Ended with Return code error = 8? What we do now?

    Hi all,
    I was trying to transport the Update rules from Development system to Production system.
    But in the middle it got failed in Quality system & given the error as mentioned below.
    "Ended with Return code = 8".
    What we need to do now.
    Please Give ur valuable suggestions.
    Thanks in Advance.

    Hi,
    Pleas make sure that the target and the source for the update rules are present in the Quality sytem and are activated. if they are not present or are in inactive state then u need to transport them first and later on update rules.
    Sometimes what haapens is source and targets object for the update rules are present in the quality system and we make some changes in them in development and after making changes forget to transprt the changed request for source target and directly try to transport update rules which fails giveing an error. so jst make sure that the version in Development and the quality system for the both the source and targets objects are exactly same.
    i guess there would be one among the two cases mentioned above but still if its not the case then see wat error are u getting provide us the exact error so that we can be of more help to you.
    Assign points if applicable
    Thanks
    Puneet

  • Client Copy with return code error :W

    Hi Gurus,
    When I am copying from Prod. client 500 to Quality Client 400 in (ECC 6), I am getting
    'Program ended with error or warning, return code: W"
    can any body please give soultions for this
    Regards
    Gokul

    Hello Mr.  Bhavik,
    I had check in SCC3 client copy log and all error was got in test run, below gives details of log and examples of some table details log please help me what I can do?
    Target Client     400     
    Source RFC Dest.:     CLNT500TRP
      System Name:     TRP     
      Client in Source System     500     
    Copy Type     Remote copy
    Copy Type     Test Run     
    Profile          SAP_ALL     
    Status          Completed w. Dictionary Errors
    User          BASIS     
    Start on          27.03.2010 / 11:33:21
    Last Entry on     27.03.2010 / 12:20:36
    Statistics for this Run     
    No. of Tables         52598 of     54115
    Deleted Lines     5394087     
    Copied Lines     31175343     
    Warnings and Errors
    Table Name     Component     Package
    A001     SD-MD-CM     DDIC Error        (See SE14)
    A004     SD-MD-CM     DDIC Error        (See SE14)
    A005     SD-MD-CM     DDIC Error        (See SE14)
    A006     SD-MD-CM     DDIC Error        (See SE14)
    A007     SD-MD-CM     DDIC Error        (See SE14)
    A009     SD-MD-CM     DDIC Error        (See SE14)
    A010     SD-MD-CM     DDIC Error        (See SE14)
    A012     SD-MD-CM     DDIC Error        (See SE14)
    A015     SD-MD-CM     DDIC Error        (See SE14)
    A016     SD-MD-CM     DDIC Error        (See SE14)
    A017     SD-MD-CM     DDIC Error        (See SE14)
    A018     SD-MD-CM     DDIC Error        (See SE14)
    A019     SD-MD-CM     DDIC Error        (See SE14)
    A021     SD-MD-CM     DDIC Error        (See SE14)
    Table Information
    Table:                      A001
    - Short Description:        Not Used in Standard
    Package:                    VKON
    - Short Description:        Application development R/3 conditions
    Application Component:      SD-MD-CM
    - Short Description:        Conditions
    Delivery Class:             A
    Table Type:                 Pooled table
    Technical Information:
    Nametab of Table is Correct
    Table Exists in Database:   KAPOL
    Table Information
    Table:                      A028
    - Short Description:        Info Record for Non-Stock Item
    Package:                    VKON
    - Short Description:        Application development R/3 conditions
    Application Component:      SD-MD-CM
    - Short Description:        Conditions
    Delivery Class:             A
    Table Type:                 Pooled table
    Technical Information:
    Nametab of Table is Correct
    Table Exists in Database:   KAPOL
    Regards
    Gokul Borse
    9881843629
    Edited by: Gokul Borse on Mar 28, 2010 7:17 AM

  • Return Code error

    Hi Gurus,
    in The standard data flow . Data is coming from 2LIS_02_SCL  to cube 0PUR_C01. I want to introduce an ODS in between. So i am copying the routines in update rules for 0PUR_C01 into Custom ODS update rules
    There is the  routine :
    IF ( condition)
    Result = comm strc field
    Return code = 0
    else
    Return code = 4
    endif.
    When i try to load data to ODS. It gives me this error
    <b>The return code was set to <> 0 in routine 'r0012_0DEL_SCHEDS ', but the
    corresponding data field is updated with MOVE. You therefore can  not
    prevent the update of a single data field for certain key  values.</b>
    But the same code works perfectly for Cube update rules.
    Please guide me out of this problem. Thanks in advacne
    Regards
    satish

    Hi,
    This will not run in ODS. The reason is because the ODS is like a flat table and data is always overwirtten if the keys for the ODS is same.
    In cube however data is always added. Because of this it is possible to elimante a record if some conditions are not satisfied....
    As best practice, your first layer ODS should get all the data without any transformation, in that case u are sure you are not loosing any thing, if in future u have to change your bussiness logic your first layer will always have all the data.
    The conditions of eliminating data can then be put while doing the uploads from ODS to cube....even if tomorrow your business logic changes your ODS will still have all the data with delta's running...You can then simply change your business logic from ODS to cube...I hope you get the point..
    Assign points if u find this useful...
    Regards
    Jadeep

  • VBA Return code error -3

    <p>Hi,</p><p>I'm writing a module to automate the retrieval of a handful ofxls files using essbase and VBA.  My current approach is tokeep a list of which files need to be refreshed in an accessdatabase and automate excel through VBA from Access.  I runinto a problem when I call EssVConnect.  It consistentlyreturns -3, which claims to be an initialization problem. Username, password, server, etc. are all correct, so I don'tunderstand what the problem is or how to fix it.</p><p> </p><p>I currently have a module in each xls file that is called fromAccess, the excel module makes all the essbase calls to connect,retrieve, and disconnect.</p><p> </p><p>The weird thing is that if I call the function to update theexcel files from within excel, instead of having Access call it,the function works just fine, and the retrieval goes smoothly.</p><p> </p><p>Any ideas on why calling the excel function from access wouldcause the error to be thrown?</p><p> </p><p>Thanks,</p><p>Ranthalion</p>

    whoops - here is that link<BR><BR><a target=_blank class=ftalternatingbarlinklarge href="https://http://support.microsoft.com/default.aspx?scid=kb;en-us;213489">http://support.microsoft.com/d...x?scid=kb;en-us;213489</a>

  • Unable to reorganize BIA with return code 5528 error

    Hi,
    Reorganize job is not scheduling due to 5528 return code error. It is saying that already one reorg job is active. But i do not see any running job. Also from log executions it is recorded as "Failed".
    Is the job running at TREX server ?
    Please suggest.
    -Vidyasagar

    Hi,
    Error code 5528 means the nameserver has active plan. Normally not problem but if you have already seen the wrong status in reorg in standalone trexadmin tool then this means some query is hanging.
    The reorg job can not be canceled now. You should restart  the index server on all the blades. Although running reorg don't need to care the query in general, but if you have big query then please  find a time when there is no query running to do the reorg job.
    Best Regards,
    Joseph

  • Applescript 'Contacts' code error with Maverick

    After upgrading from MacOSX 10.6.8 to Maverick my applescripts are creating errors. One example is the following script which works fine if you run it from within the 'Applescript Editor.app' (v 2.6.1) under Maverick but creates a "Data paste section" error -1743 from the 'Contacts' app if you run the script indpendently. Any hints anyone on how I might return this script to full indpendent functionality?
    Script to load a raw address for conversion and inserting into Address Book
    Wish list
    1.    Check if 'New Address' Group already exists and if it doesn't then create one.
    2.    Provide a dialog that enables the user to specify which group to attach the new address to.
    3.    Find the new address and show it in Address Book.
    4.    Create a list of existing Groups to chose from to reduce keyboard error. --> done but the resultant window is not complete - no scroll bar becomes active.
    Problem code:
    set theFiles to (every file of folder addressesFolder) as alias list
    global ABactive, aExists
    property testText : "http://address-parser.com"
    property newGroup : "New Addresses" --> Default group for new address additions
    property aPrefix : ""
    property aFirstName : ""
    property aMiddleName : ""
    property aLastName : ""
    property aSuffix : ""
    property aPosition : ""
    property aDepartment : ""
    property aCompany : ""
    property aCompany2 : ""
    property aStreet : ""
    property aStreet2 : ""
    property aPostbox : ""
    property aPlace : ""
    property aPostPlace : ""
    property aState : ""
    property aZip : ""
    property aPostboxCode : ""
    property aCountry : ""
    property aPhone : ""
    property aPhone2 : ""
    property aMobile : ""
    property aFax : ""
    property aEmail : ""
    property aWebsite : ""
    property aNote : ""
    set newline to ASCII character 10
    -- Select the desired file
    try
        set addressFile to (choose file with prompt "Choose an address file:" of type {"public.text"} without invisibles) as text
        --    set addressFile to (choose file with prompt "Choose an address file:" of type {"public.text"} default location addressesFolder without invisibles) as text
        -- note the data type set for 'addressFile' is 'text'
    on error number -128
        -- User pressed 'Cancel' button
        return
    end try
    set AppleScript's text item delimiters to {":"}
    set fileName to last text item of addressFile
    set AppleScript's text item delimiters to {""}
    (* If there is an error while processing the address file, delay it just long enough to close the file access. Otherwise continue. *)
    set addressFileReference to open for access addressFile
    -- 'addressFileReference' is the 'returned access number'
    -- Check first to see whether the file was created with output from the expected source
    try
        set wholeFile to read addressFileReference as text
        if (offset of testText in wholeFile) is equal to 0 then
            display dialog "File chosen is:" & return & fileName & return & return & "This file does not appear to contain output from the 'http://www.address-parser.com' demo page." buttons {"Cancel"} default button 1 with title "Error!" with icon stop
        end if
    on error number -128
        -- User pressed 'Cancel' button
        close access addressFileReference
        set wholeFile to ""
        return
    end try
    close access addressFileReference
    set wholeFile to ""
    -- Reopen file (need to clarify why EOF error if two read calls made with file open).
    set addressFileReference to open for access addressFile
    try
        set AppleScript's text item delimiters to {""}
        -- Read address file contents in 'addressFileContents' as a list delimited by paragraph and tab.
        set x to paragraphs of (read addressFileReference as text)
        set addressFileContents to {}
        set AppleScript's text item delimiters to tab
        repeat with i from 1 to count x
            set addressFileContents's end to x's item i's text items
        end repeat
        set AppleScript's text item delimiters to {""}
        repeat with i from 1 to count of addressFileContents
            if (item i of addressFileContents) is not {} then
                --Every line must be checked as there is no set order
                if text item 1 of (item i of addressFileContents) is "Prefix= " then ¬
                    set aPrefix to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "First name= " then ¬
                    set aFirstName to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Middle name= " then ¬
                    set aMiddleName to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Last name= " then ¬
                    set aLastName to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Suffix= " then ¬
                    set aSuffix to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Position= " then ¬
                    set aPosition to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Department= " then ¬
                    set aDepartment to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Company= " then ¬
                    set aCompany to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Company - line 2= " then ¬
                    set aCompany2 to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Street address= " then ¬
                    set aStreet to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Street address - line 2= " then ¬
                    set aStreet2 to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Postbox address= " then ¬
                    set aPostbox to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Place name= " then ¬
                    set aPlace to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Post place name= " then ¬
                    set aPostPlace to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "State/Region/Province= " then ¬
                    set aState to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "ZIP/Postal code= " then ¬
                    set aZip to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Postal code of postbox= " then ¬
                    set aPostboxCode to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Country= " then ¬
                    set aCountry to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Phone= " then ¬
                    set aPhone to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Phone 2= " then ¬
                    set aPhone2 to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Mobile phone= " then ¬
                    set aMobile to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Fax= " then ¬
                    set aFax to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Email= " then ¬
                    set aEmail to text item 2 of (item i of addressFileContents)
                if text item 1 of (item i of addressFileContents) is "Web site= " then ¬
                    set aWebsite to text item 2 of (item i of addressFileContents)
                --Collect unrecognised elements and place them in the 'Note' field
                if text item 1 of (item i of addressFileContents) contains "Unrecognized values:" then
                    set i to i + 1
                    set aNote to "Additional address bits:"
                    repeat with i from i to count of addressFileContents
                        --display dialog "Note text reads:" & return & "aNote:" & tab & "'" & aNote & "'" & return & "Line #:" & tab & i & return & (item i of addressFileContents) as text default button 1 with title "Debug Dialog"
                        if (item i of addressFileContents) is not {} then
                            if item 1 of (item i of addressFileContents) is "" and ¬
                                item 2 of (item i of addressFileContents) is not "" then
                                set aNote to aNote & newline & text item 2 of (item i of addressFileContents)
                            end if
                        end if
                    end repeat
                end if
            end if
        end repeat
    on error errMsg number errNum
        close access addressFileReference
        -- do some sort of error processing here
        display dialog "An error occurred with the following number and description: " & return & errNum & return & errMsg & return & return & "Item " & (i as string) & tab & "'" & (item i of addressFileContents) & "'" with title "Data load section."
        error errMsg number errNum
    end try
    close access addressFileReference
    --Debug dialogs
    --display dialog (item 1 of addressFileContents as text) & return & return & (item 2 of addressFileContents as text) & return & return & (item 3 of addressFileContents as text) & return & return & (item 4 of addressFileContents as text)
    --display dialog "title:" & tab & tab & tab & aPrefix & return & "first name:" & tab & tab & aFirstName & return & "middle name:" & tab & tab & aMiddleName & return & "last name:" & tab & tab & aLastName & return & "suffix:" & tab & tab & tab & aSuffix & return & "job title:" & tab & tab & tab & aPosition & return & "department:" & tab & aDepartment & return & "organization:" & tab & aCompany with title "Just prior to new record insertion:" with icon note
    --check if Contacts application is active
    tell application "System Events"
        if exists application process "Contacts" then
            set ABactive to true
        else
            set ABactive to false
        end if
    end tell
    --display dialog "title:" & tab & tab & tab & aPrefix & return & "first name:" & tab & tab & aFirstName & return & "middle name:" & tab & tab & aMiddleName & return & "last name:" & tab & tab & aLastName & return & "suffix:" & tab & tab & tab & aSuffix & return & "job title:" & tab & tab & tab & aPosition & return & "department:" & tab & aDepartment & return & "organization:" & tab & aCompany with title "Just prior to create new entry:" with icon note
    --create new address entry
    tell application "Contacts"
        try
            --if the aCompany2 variable is filled append its contents to the aCompany variable
            if aCompany2 is equal to "" then
                set thePerson to make new person with properties ¬
                    {title:aPrefix, first name:aFirstName, middle name:aMiddleName, last name:aLastName, suffix:aSuffix, job title:aPosition, department:aDepartment, organization:aCompany}
            else
                set aCompany to aCompany & newline & aCompany2
                set thePerson to make new person with properties ¬
                    {title:aPrefix, first name:aFirstName, middle name:aMiddleName, last name:aLastName, suffix:aSuffix, job title:aPosition, department:aDepartment, organization:aCompany}
            end if
            --set the Company view binary if no First and Last name
            if (first name of thePerson is equal to "") and (last name of thePerson is equal to "") then ¬
                set the company of thePerson to true
            tell thePerson
                if aPhone is not equal to "" then ¬
                    make new phone at end of phones with properties ¬
                        {label:"work", value:aPhone}
                if aPhone2 is not equal to "" then ¬
                    make new phone at end of phones with properties ¬
                        {label:"other", value:aPhone2}
                if aMobile is not equal to "" then ¬
                    make new phone at end of phones with properties ¬
                        {label:"mobile", value:aMobile}
                if aFax is not equal to "" then ¬
                    make new phone at end of phones with properties ¬
                        {label:"fax", value:aFax}
                if aEmail is not equal to "" then ¬
                    make new email at end of emails with properties ¬
                        {label:"Work", value:aEmail}
                if aWebsite is not equal to "" then ¬
                    make new url at end of urls with properties ¬
                        {label:"Work", value:aWebsite}
                if aStreet is not equal to "" then
                    if aStreet2 is equal to "" then
                        make new address at end of addresses with properties ¬
                            {label:"work", street:aStreet, city:aPlace, state:aState, zip:aZip, country:aCountry}
                    else
                        make new address at end of addresses with properties ¬
                            {label:"work", street:aStreet & ", " & aStreet2, city:aPlace, state:aState, zip:aZip, country:aCountry}
                    end if
                end if
                if aPostPlace is equal to "" then set aPostPlace to aPlace
                if aPostbox is not equal to "" then
                    if aPostboxCode is not equal to "" then
                        make new address at end of addresses with properties ¬
                            {label:"postal", street:aPostbox, city:aPostPlace, state:aState, zip:aPostboxCode, country:aCountry}
                    else
                        make new address at end of addresses with properties ¬
                            {label:"postal", street:aPostbox, city:aPlace, state:aState, zip:aZip, country:aCountry}
                    end if
                end if
                if aNote is not equal to "" then set note to aNote
            end tell
            -- place the new entry into a group
            set myGroups to name of every group
            set theGroup to (choose from list myGroups with prompt "Attach to which group?" without multiple selections allowed and empty selection allowed) as text
            --If user selects 'Cancel' button the value of the result variable is 'false'
            if theGroup is not "false" then
                add thePerson to group theGroup
            else
                -- create a default group and place the entry in there; first testing to see whether the default group already exists
                try
                    if group newGroup exists then ¬
                        display dialog "newGroup exists" with icon 1
                    add thePerson to group newGroup
                on error number -1728
                    -- newGroup does not exist so create it
                    display dialog "newGroup does not exist. Make new group with newGroup" with icon 1
                    set theGroup to make new group with properties {name:newGroup}
                    add thePerson to group newGroup
                end try
            end if
            save application "Contacts"
            set selection to (thePerson)
            activate
    --set flag that new address entry was successful by seeking
            if the selection is equal to properties ¬
                {title:aPrefix, first name:aFirstName, ¬
                middle name:aMiddleName, last name:aLastName, ¬
                suffix:aSuffix, job title:aPosition, ¬
                department:aDepartment, organization:aCompany} then ¬
            set aExists to true
        on error errMsg number errNum
            -- do some sort of error processing here
            display dialog "An error occurred with the following number and description: " & return & errNum & return & errMsg with title "Data paste section."
            error errMsg number errNum
        end try
        --if we opened the AB, we'll close it
        if not ABactive then quit
    end tell
    --clear address variables content in case of repeat use
    set aPrefix to ""
    set aFirstName to ""
    set aMiddleName to ""
    set aLastName to ""
    set aSuffix to ""
    set aPosition to ""
    set aDepartment to ""
    set aCompany to ""
    set aCompany2 to ""
    set aStreet to ""
    set aStreet2 to ""
    set aPostbox to ""
    set aPlace to ""
    set aState to ""
    set aZip to ""
    set aPostboxCode to ""
    set aCountry to ""
    set aPhone to ""
    set aPhone2 to ""
    set aMobile to ""
    set aFax to ""
    set aEmail to ""
    set aWebsite to ""
    set aNote to ""
    -- Delete original file if contents have been successfully added
    if aExists then
        try
            tell application "Finder"
                if exists file addressFile then
                    delete file addressFile --moves it to the trash
                end if
            end tell
        on error errMsg number errNum
            display dialog "Inserting new address was successfiul, however an error occurred while deleting the original file:" & return & addressFile buttons {"Cancel"} default button 1 with title "Error!" with icon stop
            display dialog ""
        end try
    end if
    -- End of 'add address' script

    Well, after a few days of restoring my cellphone (The C6-01 I mentioned before), I came to this:
    - After Hard resetting, the Lock Code is still erroneous;
    - After firmware reinstalling, Lock Code is erroneous;
    - Pulling out the battery, leaving the cellphone with no power for several hours, give the same result;
    - Downgrading firmware (previous version) did not fix the problem;
    Interesting thing is, after power on, the cellphone asks for the code lock: entering ANY number, returns "Code Error", and simply goes back to normal operation.
    Everything is working, except I can no use de Lock Code, or any function related to it.
    Of course, is pretty annoying to enter the lock code every time I power-on the cell.

  • How to undo an order of transport which has returned an error code 8

    Hi experts,
    While transporting an installation of business content, it has removed a lot of transfert rules. Could you tell me how to undo this transport from quality to the production envirenenmet. Unfortunately I dident check the transport order which has returned the code error 8.
    Thank you for your answer.
    Regards.

    Hi Joseph,
    Transport all the objects you want in the order again with a new request. This will replace all the transported objects and you will get all the objects transported.
    Regards,
    KK.

  • Error in transport, ended with return code:  12,  job RDDEXECL cancelled

    Hi Friends,
    When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
    ===================================
    Program terminated (job: RDDEXECL, no.: 09222300)
       See job log
    Execution of programs after import (XPRA)
    End date and time : 20080509092238
    Ended with return code:  ===> 12 <===
    Job log:
    Date        Time      Message
    09.05.2008  09:22:23  Job started
    09.05.2008  09:22:23  Step 001 started (program RDDEXECL, variant , user ID DDIC)
    09.05.2008  09:22:23  All DB buffers of application server unix0001 were synchronized
    09.05.2008  09:22:25  ABAP/4 processor: UNCAUGHT_EXCEPTION
    09.05.2008  09:22:25  Job cancelled
    =======================================
    Kindly advice.
    Thanks & regards,
    Kunal Patel.

    Hello,
    I ran a search for this error and found the following notes:
    SAP Note 966234 - 70SP10: DTP transport and content error
    SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
    Check if they are relevant for your system.
    Regards,
    Siddhesh

  • Error while calling COM routines via application prog(return code 1028533-)

    Hello Expert,
    In Interactive Demand Planning ( /SAPAPO/SDP94 ), when I'm trying to load data in a planning book , error
    'Error while calling COM routines via application program (return code 1028533-)' is encountered.
    In my selection id, i have only two locations....there is no material selection. 
    When I select the 1st location and load the data its getting loaded properly.....but when i select the 2nd location and try loading data ...the above error is coming.
    I did run /SAPAPO/TS_LCM_CONS_CHECK but the problem persist.
    Any advise to fix this issue would be much appreciated.
    Thanks.
    Tom

    Hi Tom,
    Please see if below exiting threads help you.
    COM error 40134 in Interactive Planning on SCM 5.0 Support Pack SAPKY50011
    Error for COM Routine application program (return code 40028)
    Thukral

  • Document control failed due to error in [DOCMGR-CANCEL] with a return code

    i am getting this error while calceling the purchase order "Document control failed due to error in [DOCMGR-CANCEL] with a return code of [OTHER]. "
    I am doing the calcel like this
    Nav: buyer work centre --> order
    searche the po and then
    select order --> cancel then click GO button
    i gave the Reason as Cancel
    communication method: email
    Cancel Requisition: Yes
    Please help on this, its urgent.
    Thanks,
    Vijay.

    Hi Vijay,
    Check this MOS note.
    Cancelling A Standard Purchase Order In Buyer Work Center Results In Error [Docmgr-Cancel] With A Return Code [ID 1338826.1]
    Thanks
    -Arif.

  • [Error during Export] R3load exited with return code 11

    Hi guys,
    While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
    ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
    Unloading of 'REGUC' export package is interrupted with R3load error.
    Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
    For mode details see 'REGUC.log' file.
    Standard error output:
    sapparam: sapargv(argc, argv) has not been called!
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    REGUC.log details:
    (As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
    /usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
    /usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
    /usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
    Compiled Jul 23 2013 21:30:53
    /usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
    (EXP) INFO: check NameTab widths: Ok.
    (DB) INFO: Export without hintfile
    (RSCP) INFO: UMGCOMCHAR read check, OK.
    (RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
    (RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
    (RSCP) INFO: UMGSETTINGS nametab creation: ok.
    (RSCP) INFO: Global fallback code page = 1160
    (RSCP) INFO: Common character set is  not  7-bit-ASCII
    (RSCP) INFO: Collision resolution method is 'fine'
    (RSCP) INFO: R3trans code pages = Normal
    (RSCP) INFO: EXPORT TO ... code pages = Normal
    (RSCP) INFO: Check for invalid language keys: activated
    (RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
    (RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
    (RSCP) INFO: I18N_NAMETAB_ALT_ALLOW  = 10000
    (RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
    (RSCP) INFO: I18N_NAMETAB_OLD_ALLOW  = 0
    (RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
    (RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
    (RSCP) INFO: "REGUC001.xml" created.
    (GSI) INFO: dbname   = "ECP20030615080638
    (GSI) INFO: vname    = "ORACLE "
    (GSI) INFO: hostname = "ecp "
    (GSI) INFO: sysname  = "SunOS"
    (GSI) INFO: nodename = "ecp"
    (GSI) INFO: release  = "5.10"
    (GSI) INFO: version  = "Generic_142900-13"
    (GSI) INFO: machine  = "sun4u"
    Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
    Any hint of what is causing this error?
    (Please disregard any Filesystem issues since all of them have available space)
    Best!

    After using latest R3load patch, it provides furher information on the log file.
    -------------------- Start of patch information ------------------------
    patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
    017805)
    DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
    (note 1821404)
    --------------------- End of patch information -------------------------
    process id 27326
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
    (EXP) INFO: check NameTab widths: Ok.
    (DB) INFO: Export without hintfile
    (RSCP) INFO: UMGCOMCHAR read check, OK.
    (RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
    (RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
    (RSCP) INFO: UMGSETTINGS nametab creation: ok.
    (RSCP) INFO: Global fallback code page = 1160
    (RSCP) INFO: Common character set is  not  7-bit-ASCII
    (RSCP) INFO: Collision resolution method is 'fine'
    (RSCP) INFO: R3trans code pages = Normal
    (RSCP) INFO: EXPORT TO ... code pages = Normal
    (RSCP) INFO: Check for invalid language keys: activated
    (RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
    (RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
    (RSCP) INFO: I18N_NAMETAB_ALT_ALLOW  = 10000
    (RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
    (RSCP) INFO: I18N_NAMETAB_OLD_ALLOW  = 0
    (RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
    (RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
    (RSCP) INFO: "REGUC003.xml" created.
    (GSI) INFO: dbname   = "ECP20030615080638
    (GSI) INFO: vname    = "ORACLE                          "
    (GSI) INFO: hostname = "ecp                                                             "
    (GSI) INFO: sysname  = "SunOS"
    (GSI) INFO: nodename = "ecp"
    (GSI) INFO: release  = "5.10"
    (GSI) INFO: version  = "Generic_142900-13"
    (GSI) INFO: machine  = "sun4u"
    (GSI) INFO: instno   = "6120023288"
    (RTF) ########## WARNING ###########
            Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
    (RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
    (RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
    (EXP) INFO: table REGUC will be exported with sorting (task modifier)
    ------------------ C-STACK ----------------------
    [0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
    94
    [1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
    ffffff7b9627e4
    [2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
    at 0xffffffff7b9623b0
    [3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
    b961eb4
    [4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
    ff7b961c28
    [5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
    [6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
    x1000d1ce8
    [7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
    0 ), at 0x1000d188c
    [8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
    [9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
    0xb3, 0x1058c8f84 ), at 0x1000d0408
    [10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
    f944
    [11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
    at 0x1000ce314
    [12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
    0 ), at 0x1000cdb18
    [13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
    0x10077d8c0, 0x0 ), at 0x1000cd10c
    [14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
    6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
    [15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
    32e0, 0x10077d8c0 ), at 0x1000b2f58
    [16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
    x1000b1f8c
    [17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
    ), at 0x100062714
    [18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
    0x100064644
    [19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
    0 ), at 0x10007162c
    [20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
    fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
    [21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
    fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
    [22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
    fffff7bb47540 ), at 0x10006d148
    [23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
    1005fc290, 0x0 ), at 0x1000514e0

  • Importing error Ended with return code:  === 8 ===

    Hi Experts,
    I am trying to transporting an infoobject 0EMPLOYEE from Dev to Production.While importing the request I am getting an error like
    Execution of programs after import (XPRA)
    Transport request   : BD1K901543
    System              : BP1
    tp path             : tp
    Version and release: 372.04.36 700
    Execution of programs after import (XPRA)
    End date and time : 20090206164251
    Ended with return code:  ===> 8 <===
    after expanding this error msg i am getting
    Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
    Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
    Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
    by clicking on the error mag
    Diagnosis;
    If the characteristic is used in an InfoProvider with dimensions (for example, an InfoCube or MultiProvider), the compounded unit is not unique if currency key figures are used at the same time.
    System Response
    This type of modeling is not supported.
    Procedure
    Replace the currency with a different characteristic. If you nevertheless want to use a unit in the compounding, you should use the modeling of a characteristic that semantically represents a unit. To do so, copy the technical properties of the unit of measure or the currency.
    How can I solve this problem?
    Can add any other char to this compounding char is it works?if yes which currency char i need to add here?
    Thanks & Regards,
    Sridhar

    Hi Sridhar,
            I am facing the problem with 0CM_CTAR and 0CM_SHAR. both the characteristics are not allowed compouding ATTRIBUTES.
      0cm_ctar not allowed comp .attr of 0unit_dim
      0cm_shar not allowed comp.attr 0f area_unit.
    for this reason what i need to do. Please give me help on this.
    sridhar could you give me solution what i need to do. i am also implement  same sap note or any other solution you have.
    Please kindly give me reply.
    Thnaks,
    Guna.
    Edited by: gunasekhar raya on Apr 14, 2009 6:16 PM

Maybe you are looking for