Return delivery - J1IS - posted automatically

Hi,
I need a clarification on blw issue,
I have posted migo (101) with excise capture and post option.. where all are updated correclty,  i have checked the number range also and it updated correctly.
Later, i'm returning the material to vendor (122), upon saving the migo.. the doc has saved as return migo.
here when i check the nbr range for the object j_1exloc.. it has generated the next nbr , when i open this doc, it has my return delivery migo nbr in the reference field... how it generated??? i didn't do J1IS??

Hi,
Please check while MIGO for return delivery (movt 122)
In excise tab u must have selected "Capture and Post option" that is why it is gnerating the no and it is correct.
regards,
sujit

Similar Messages

  • Error while creating excise invoice to return Delivery (J1IS)

    Dear all,
    Plz help to solve this problem.
    After MIGO. I have done return delivery to vendor(Movt-122).
    With ref to the return delivery doc I am trying to create excise invoice to send to vendor in J1IS.
    but error appears as Vendor not related to material documents.
    Thanks & Regards
    Sanjay Larokar

    Hi Sanjay,
    Apply Below Notes
    1042131     Vendor displayed as incorrect in J1IS if no leading zeros
    1025204     Vendor not recognized in J1IS and error 076 displayed
    1008100     Error "Vendor not related to Material doc" displayed in J1IS
    1003491     Vendor not recognized in J1IS and error 076 displayed
    960564     Vendor code truncated in J1IS resulting in Error 8I 786
    Cheers...
    Santosh

  • Return Delivery excise posting in MM ( Purchase )

    Hai Friends,
    I have one received one material, which QM Person has rejected so that inventory people decided to send to return delivery.
    I went to MIGO to do return delivery ( 122 movement type ), there in Excise tab ( MIGO ) ... system is asking GOOD ISSUE INDICATOR -
    I think i have done mistake some where in configuration
    Please guide where it is ?

    Hi,
    At the time of doing return delivery(122M.Type) in MIGO the system gives 2 error messages
    1) Enter reason for movement
    2)Plz. enter goods issue indicator
    For the 1st error you need to give the reason for movement  ( items details where tab. ).
    For the 2nd error you need give the goods issue indicator (item details Excise item  tab.).
    Now select the appro. goods issue indicator and post.

  • CRM - Automatic Return Delivery for Customer Owened Repair sales order

    Hi Guys,
    We are implementing Customer Owned Repair sales order Process in CRM and requirement is that once order gets replicated in ECC, automatic Return delivery should be created.
    We have following settings done,
    1. Order Type ZREP has automatic delivery creation set : A
    2. Item category has special stock indicator E and and Returns
    3. schedule line category IR has 653 Movement with special Stock E and availability is not flagged.
    so in this configuration, when i create Order Manually, Return delivery gets created automatically even if there is Zeor stock (Schedule line confirms the Qty) but while Order gets replicated from CRM it does not because schedule line does not confirm the qty (Zero Qty).
    Please advise on this asap as we are in verge of delivery and facing this issue.
    Regards,
    Dharmesh.

    Hello Peter,
    Regarding Posting of Goods Issue for Spare Parts in SAP R/3 Materials Management,
    The data posted depends on the logistics scenario(s) that you use. The system therefore first determines the logistics scenario defined for the combination of transaction type, item category, service organization, and other relevant information required for the scenario (for example, movement type or special stock indicator in SAP R/3).
    Availability information informs you whether the service parts are currently in stock. Each service part item generates a reservation in the back end system, which can be used to trigger an early procurement process.
    To know more about the same refer the below link:
    http://help.sap.com/search/highlightContent.jsp
    http://help.sap.com/saphelp_crm50/helpdata/en/cb/f876d513c56e4e864c15517ff67e92/frameset.htm
    Hope this helps!
    Thanks and Best Regards,
    Shanthala Kudva.

  • Error during reversal of return delivery posting.

    Hi,
    We have received some goods returned  from customer.
    We created return order , return delivery and posted GR for return delivery to have stock in.
    But now we realise that we have booked material agaonst wrong delivery so we need to cancel return delivery.
    when i am trying to reverse return delivery with VL09 , geting error as "error during search for WM movemnt type (652 1 L) "
    how i should cancel this return delivery
    thnks

    Hi,
    Is L9005 the error message?
    Please check your entry in table T321 (V_T321).
    SPRO > LE > WM > Interfaces > IM > Define Movement Types - here choosse LE-WM interface to Inventory Management.
    As per the error message you should maintain a record for your WH:
    - reference mvt 652
    - special indicator: 1 (this indicator is likely to be in the material master of your product too)
    - movement indicator L
    Regards,
    Csaba

  • BAPI for Post Goods Receipt - VL02N(SD) - Return Delivery

    Hi All,
    Could you plz tell me the bapi or function module or bdc for post goods rceipt for return delivery. I am ucing the bapi called BAPI_GOODSMVT_CREATE but it throughing an error. u can not do the these movement types.like this. Here i am using the movement types as - 632,651 and 653. could any one hlp me regarding this issue. its urgnt and i am not able to get the reason.it is working for normal delivery when i use the same for return delivey with the above movement types its not working.
    VL02N - return delivery number -
    > Post goods receipt.
    thnks
    yerukala setty

    Hi,
    Use BAPI 'BAPI_OUTB_DELIVERY_CHANGE'
    Check out this thread, this question is being solved before.
    bapi for vl02n about post goods issue
    Thanks,
    Krishna

  • Error while doing the return delivery

    Hi Experts,
    I had created an PO with describe requirement for 50 quantity and did partial confirmation of 30 quantity.
    While doing the return delivery for 10 quantity system is throwing error
    Line 1: No goods receipt possible for purchase order 4200051444 00001
    When tried doing the same process in ECC, the return delivery is posted without error.
    We were able to do the return delivery earlier. Can anybody throw light on, for the possible reason for this error.
    Your early response is appreciated.
    Regards,
    ASGMDM

    HI,
    This is due to anyone of the following :
    01. No further confirmation expected button is checked while doing confirmation for quantity 30. Please check the same in PO, if it is checked please uncheck the same so that you can do further confirmations.
    02.Please check the confirmation status of 30 quanityt which you posted earlier. It should be having Posted in Backend. If it is not, then you cannot create return delivery for the same. Also please note that Back end GR document number for 30 quantity should be updated in the table BBP_PDBEH under the field BE_OBJECT_ID.
    Thanks
    Rajesh K

  • Return Delivery Goods Receipt amount takes current MAP instead of old MAP

    Hi,
    I'm facing a problem in the following scenario:
    1. Sales order is created
    2. Delivery is created
    3. Goods Issue for the Delivery is posted (cost of goods sold = current moving average price of material = 100 SEK)
    4. Invoice is created
    Event: Moving average price of material is increased with 100 % (Moving average price changed from 100 SEK to 200 SEK)
    Event: Customer returns the order for some reason
    5. Return order is created with reference to the invoice in step 4 (same amount the invoice)
    6. Return delivery is created
    7. Credit note is created (same amount as the invoice)
    8. Goods Receipt for the Returns delivery is posted (cost of goods sold = current moving average price of material = 200 SEK)
    Result: The financial bookings after the Goods Receipt will use the new moving average price and the stock value will increase with 200 SEK, even though the initial stock deduction was only 100 SEK to delivery the material to the customer.
    Problem: We have now created 100 SEK worth of stock --> This is not allowed
    Question: How can I manipulate the goods receipt amount to use the old moving average price of 100 SEK instead of 200 SEK?
    Thanks for your suggestions!
    Edited by: Berglund Teodor on Jun 1, 2010 4:17 PM

    Hi Teodor!
    I have to solve the same problem. Could you give me some more information about tha way you used this badi?
    Thank you .
    Florina

  • Difference between subsequent adjustment and return delivery ...?

    Dear all ,
    Provide difference between subsequent adjustment and return delivery ...?
    sri....

    Hi,
    Subsequent delivery means you have to reverse the goods receipts after
    entering corresponding invoice and you want to post another goods receipt
    than use subsequent delivery in MIGO with reference to old goods receipt
    number.
    Subsequent adjustment means updating the price difference in the quantity
    already supplied.
    Ex: Original invoice price is 100 for quantity of
    10 nou2019s, i.e., Invoice amount is 1000 after doing MIRO for amount
    1000 you get another supplementary Invoice for amount
    100 towards price revision. In this case  you have to adjust through subsequent
    adjustment.
    If your question was on posting logic for alternative posting of exchange rate differences. then,
    Subsequent adjustment*
    When you make a subsequent adjustment, the system posts all values with the exchange rate at the time of the goods receipt.
    Return Delivery
    If there is a return delivery, the posting date is based on the time of the goods receipts. The system converts the stock value using the average exchange rate with reference to the purchase order.
    Regards,
    Sadiq.

  • Error Message during posting return delivery against materil document

    Dear experts
    I have created a purchase order with batch specific unit of measure KAI.
    I created the inbound  delivery document (say for eg: 30,000 KG)
    I have taken GRN for the above IBD through MIGO transaction with 101 movement for all 30,000 KG.
    Later i have posted the return delivery 122 movement with reference to above 101 material document. 30,000 KG
    After this i realized that i need cancel the 101 movement document.
    So cancelled the 122 movement document, and try to cancell the 101 material document.
    Then system is issuing error message VLA 321 "Movement type 102 cannot be used here".
    Also if i again want to post return delivery to send the stock back, then also i have error message. but this time it is VLA 319
    "Return delivery qty greater than previously GR-posted qty:"
    My Support package for SAP_APPL, relese 600 is SAPKH60019.
    Please suggest me solution to fix these errors as these are not relavant for the situation.
    Regards/Murali

    Hi,
    Can you please check this note...
    Note 1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
    Note 1342935 - Error message BORGR 623 during GR reversal in MIGO
    Regards
    Bhuban

  • Error while posting stock from quality to return delivery

    Hi ,
    I am working in decentralized warehouse. I am posting stock from quality to return delivery in t code QA32. The following is the error message i am getting . i have also checked the movement type settings they are fine for 553.
    "Posting only to free or blocked stock due to missing goods receipt".
    Please let me know if i am missing any thing in config......
    Thanks
    Ilyas

    Hi Ilyas,
    Can you check again the movement type? For return delivery movement type 122 is used and 553 is for GI scrapping from QI. You can check it in SPRO>QM>QI>Inspection lot completion> Define inventory postings.
    reg,
    Sudhir

  • Error while posting return delivery to backend system

    Hi All,
    We are facing problem when we are posting return delivery. Currently we are in ECS implementation. Our SRM is 7.0 EHP3.
    Scenario goes as, SC is created then PO is created then further confirmation is created and on creating return delivery of this confirmation, this return delivery goes error in process.
    Now on further analyzing, I found out that outbound IDoc in SRM is getting posted successfully but when ECC receives this IDoc it is saying please enter reason for movement 122. This reason for return is already entered while creating the return delivery. But this reason is not flowing in IDoc (Message Type MBGMCR and Basic Type MBGMCR01) in SRM and further to ECC. This field MOVE_REAS in IDoc is populating blank.
    Can anybody help me resolving this problem? Any pointers or SAP notes related to can also be suggested.
    Thanks
    Siddarth

    Hi Siddarth,
    Please implement the note below, which is included in SP05.
    2007628 - Return delivery cannot be posted in backend system as reason for return delivery is empty
    Regards,
    Wendy

  • Reverse a Return Delivery with inspection lot posted (QM)

    Hello experts,
    I want to reverse with transaction VL09 a good movement of a return client delivery with inspection lot. I posted the inspection lot and transferred the material to Unrestricted use (transaction QA11).
    Then I began the cancel Return Process and I transferred the material to Quality (movement type 322) to run VL09 with material in Quality stock, but the system displays  the following error message:
    You cannot cancel GR, since inspection lot is already partly posted
    Message no. QA046
    Diagnosis
    You are attempting to reverse a goods receipt although quantity postings have already been made from the inspection lot. This means that stock for the goods receipt has already been transferred and, for this reason, a cancelation of the document is no longer possible.
    Procedure
    Ensure that the postings in QM (within the usage decision transactions) are carried out.
    Please let me know what can I do to reverse the return delivery.
    Thanks in advance.
    Pablo

    You are trying to do the process which you ahve already transferred through Transaction QA11.
    The role of Cancel return Process has already been done by this transaction as the Stock has already been into Un- restricted.
    Best Regards,
    Ankur

  • Capture and post list in MIGO for excise in return delivery

    Dear All,
    when I am doing return delivery in MIGO by 122 mov type and wants to capture and post the invoice at the same time.
    the list apperaing only part 1 enty and no excise duty in selection list.
    can anybody reply how to get this option added for capture and post
    Regards,
    Yashpal

    Hi,
    If u have done only GR for Both materials then Cancel ur GR and Post it again.
    And if you have Done J1iex for first material then Cancel GR first then Cancel Excise Invoice.
    Now to cancel Excise Invoice follow the path as
    From the SAP Easy Access screen, choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods Movement (MIGO).
    In the top line:
    Select Cancellation.
    Select Material document.
    Enter the number of the goods receipt that you want to cancel
    Choose .
    Flag all of the line items as OK.
    Save the reversal document.
    Reversing CENVAT Postings
    From the SAP Easy Access screen, choose Indirect Taxes ® Procurement ® Excise Invoice ® Incoming Excise Invoices ® Individual Processing ® Change/Display/Post/Cancel.
    In the top line:
    Select Post CENVAT.
    Select Vendor Excise Invoice.
    Enter the excise invoice number.
    Choose .
    Choose Simulate CENVAT.
    A dialog box appears, showing which postings the system will make to reverse the CENVAT.
    To close the dialog box, choose .
    Choose Post CENVAT.
    Canceling Excise Invoices
    From the SAP Easy Access screen, choose Indirect Taxes ® Procurement ® Excise Invoice ® Incoming Excise Invoices ® Individual Processing ® Change/Display/Post/Cancel.
    In the top line:
    Select Cancel.
    Select Vendor Excise Invoice.
    Enter the excise invoice number.
    Choose .
    Save the excise invoice
    if Not solved then please specify that is error by system.
    Regards,
    Pardeep malik

  • MM Smartforms:GoodsIssue Slip/Transfer Posting/Return Delivery/Physical Cou

    MM Smartforms
    Hi Gurus,
    Can any one guide me on the smartforms related Material Management - with the smartform names for the below mentioned items along with the driver program name
    1.Goods Issue slip
    2.Transfer posting
    3.Return Delivery
    4.Physical counting
    Request your inputs for the same.
    Regards
    S

    Hi,
    For Good Issue
    Print Program: /SMB40/M07DR
    Smartform Name: /SMB40/MMGI3_A
    For Goods Return, Driver Program is same as above and Print Program is /SMB40/MMGR1_A
    Rest I need to fined.
    You can also check by going to Nace->Application Type ME-> Output Types.
    You can find these standard smartforms and their respective driver program.
    Hope it clears for you. Please appreciate.
    Regards
    Sachin

Maybe you are looking for