Return Delivery movement 653 E

Hi
I have the following scenario. It is not really a return delivery, but actually taking in a trade in from the customer.
This item category allows us to use movement type 653 E bringing the item into stock, however it posts at the moving average price.
When I look at the pricing conditions in the sales order, VPRS is showing the moving average price. I have tried to put in a routine to change this price to use copy the price from another condition, however when I do this, condition VRPS disappears and when I post it still uses the moving average price.
Is there any way I can control the price that is used to post the goods issue for the return if the is no reference document to copy the info from?
Thanks

Hi Karen,
Please make sure the material that you use is having the special stock indicator in the material master.
For more info, please refer to the below thread:
Special stock indicator | SCN
Please let me know for any further info if required.
Regards

Similar Messages

Return Delivery- Move type issue

Hi frnds
I have an issue i have not been able to resolve.
The client wants to scrap the material when receiving the return delivery(LR) on a return order(RE). Initially 657 mov type was asssigned to DN schedule line category in VOV6, so i changed it to 551 but when i ran the return delivery i got error that the update control for this move type does not exist.
I then copied the mov type 657 in OMJJ and renamed it (999) and in the update control kept the ref mov type as 551 but on running return delivery the stock is still going in the blocked area instead of getting scrapped.
Does someone have any suggestions for me.... I think i am missing something but am not able to figure it out. I hope i can scrap the material form a return delivery.!!!!
If i use move type 657(GR-blocked stock) and then use 555(GI-scrap from blocked stock) in Move type step 1 in transaction VOV6, will it work ?????
Will award points..
Message was edited by:
Comes Naturally

Hi
The movement type for Return Delivery is 651. Pls make use of this movement type to first post the goods as Returns goods.
Then using 453 you can post them into unrestricted stock.
Reward if this helps.

Returns Delivery Movement type

Hello all,
The scenario is intercompany returns. The stock should be moved in 2 steps from block to block. I am trying to use a different movement type in the returns delivery NCR instead of the std 161 mov type.
1. can you suggest a mov type that could move the stock from blocked ( supply plant) to block ( returning plant) ? Closest I could get was 915, but could not prototype.
2. How is the movement type determined from in returns delivery for a purchase order ( return STO) ?
Thanks .

Hi
Are you trying to do stock transfer or return delivery?
If both the plants belongs to your client use trasnfer posting facility for this.and look for mvt types 459 and 460.
Or if this is not what you want, please explain your query properly?
regrds
Yogesh

Return Delivery Movement Type Error

Hello all Gurus,
While doing a return delivery with respect to a material document with movement type 122, im getting the following error in my system:
"Update control of movement type incorrect (entry 122 X X)"
I have seen the diagnosis and it is coming as The system could not find entry 122 X X in any of the movement type control tables.
Kindly advise me how to solve this issue.
Thanks and Regards,
Umakanth.

Hi
Try customization
OMJJ
choose Mov.Type 122
and from left menu choose Update control / WM movement types
and then do relevant customiztions
Regards

Cancellation of Mat Document for Return delivery mov 161(Here Mov Type 922)

Hi SAP Support,
     Myself got an issue relevent to Wrong MIGO. User due to wrong concept did MIGO where Movement type was 922 though its return PO (Means Return PO
is ticked - Mov type 161).
Explanation : At the time of MIGO , default movement type was 101, so automatically it should pick 161 at the time of Good Received.
          But here when the user open the MIGO Screen, last movement type was showing i.e. 901. And user did MIGO where it changed automatically to 922.
Now when I cancelled the document, flow was :
          a.      5000147271 - 922
          b.      5000151684 - 161
          c.     5000151730 - 162
          d.     5000152339 - 161
Which is wrong as per my perception and i.e. why not maching the same.
But while doing the Same in Quality Server with the Same Documents (Just refreshed 2 days back), flow is
          a.      5000147271 - 922
          b.      5000151684 - 123
          c.s     5000151730 - 161
     Which is perfect one. And this should be the results. Now my reuirment that how could I do managed the same way in Production. Please help me.
Regards,
Pinku

Hi,
Can you please explain as to what this "9" series movement type represent.Is the movement type "922" a copy of the movement type "122" ?
Kindly make a note that the reversal movement types are determined from the configuration for "Copy ,Change Movement types" T code - OMJJ. Here select any movement type & click on "Reversal/follow-on movement types" for which you want to know the reversal movement type. Hope this gives you an idea for resolving the issue.
Regards
Swapnil

Error while posting stock from quality to return delivery

Hi ,
I am working in decentralized warehouse. I am posting stock from quality to return delivery in t code QA32. The following is the error message i am getting . i have also checked the movement type settings they are fine for 553.
"Posting only to free or blocked stock due to missing goods receipt".
Please let me know if i am missing any thing in config......
Thanks
Ilyas

Hi Ilyas,
Can you check again the movement type? For return delivery movement type 122 is used and 553 is for GI scrapping from QI. You can check it in SPRO>QM>QI>Inspection lot completion> Define inventory postings.
reg,
Sudhir

Return Delivery via BAPI_GOODSMVT_CREATE

Hi,
I'm trying to post a return delivery movement type 222 using BAPI_GOODSMVT_CREATE but getting error For reservation 0002207600 0001, no movements can be posted . I notice that this bapi was using MB11 for the posting and tested also getting same error. But the return delivery was able to be post using MIGO.

Not able to post via BAPI causes by the item in the reservation was mark for deletion.

Return delivery possible despite invoice being posted for a PO

Dear forum members,
We found when testing SRM and MM that our ECC system allows us to create return deliveries for PO items of standard item category and service item categories which are GR-Based IV.
Our client does not feel this is correct and has asked us to look into preventing the return delivery (movement type 122) material document posting from being possible if an invoice has been posted (with no blocks) against all PO's.
This seems reasonable to us, but we do not know of any config or user exits to do this. Do you have any suggestions please?
I have seen the config which hould prevent a return for GR-Based IV but this does not seem to work in our ECC 6.0 system. Is there an OSS note which can fix this?
Also, are there legitimate reasons why we should still allow return deliveries to be posted afterb the invoice has been paid?
Thanks a lot,
Best regards,
Nick

Dear,
You can use MIGO -> Return Delivery with referance of Material document.
Other way create return purchase order with tick on return check box, which is available in purchase order item level.
Note: You can't post invoice verification in case of return delivery
If it is useful for u, Please revert back.
Regards,
Mahesh Wagh

Process for Return Delivery and Capture Excise

Dear All,
I have done GR for 10 Qty and created Excise Invoice for the same, now I have to reject 5 qty out of 10, so I have done it through Return Delivery movement type 122.
Now My question is how to adjust 5 qty and its amount in in Excise Registers.
Regards,Vivek

HI
after performing 122 movement type
now use t-code J1IS ,click on create and give material document of 122 movement type there give plant ,excise group ,series group and vendor
for more info check following link
[Return to vendor with excise duty..?;
Regards
Kailas Ugale

Return Delivery of Good Receipt

Dear Sir,
We have a following scenario :
We did a MIGO for an item 'X' having 4 nos pieces . During MIGO following Financial Doc got posted .
GR/IR                   Credit    by Rs 1000
Freight Suspense Credit    by Rs 200
Stock                   Debit    by   Rs 1200
Subsequently 2 nos pieces got rejected and we sent back Rejected Material to Vendor . For this We did RETURN DELIVERY (movement type 122) . During the Return Delivery , following FI Document got posted :
GR/IR                   Debit    by Rs 500
Freight Suspense Debit    by Rs 100
Stock                   Credit   by   Rs 600
Our problem is that instead of Freight Suspense getting Debited , it must have been some other expense GL like "Loss due to Rejection related Freight" .
Kindly guide us as how can be address the above reported problem .
Pl help us
With Thanks and Rgds
Sonia Agarwal

Hi Sonia,
It is possible only if you are posting freight to seprate GL account. Have you made such account? If no then it is not possible.
amit

Issue with Return Delivery for movement type 262

Hi,
I have got a strange issue, the user is trying to do a MIGO Return Delivery for a material document using movement type 262, this he claims has been doing it for many materials. However when i go to the MKPF table i see the transaction Code field to be MIGO_GI for all the material documents for which he claims to have done return delivery. But under this transaction code we have only 4 options - Display, Issue, Cancel and Remove from storage.
Now when he tries to do the return delivery for movement type 262 he get an error message "Check table T156N: entry RL 262 does not exist" , but this has been very well maintained in the table.
Can you please let me know -
If it is possible to do a return delivery for a movement type 262?
If yes how to address the above error encountered.
Thanks in advance
Sachin

Hi Sachin,
If you think of return delivery to vendor with or w/o PO reference you can use movement types 161, 122, 124 as default settings.
Movement type 261 means withdrawal against production order and its reverse is MVT 262. The latter can be used e.g. via MB1A (or you can make storno of a confirmation by 261).
Are you sure your user is using the correct terminology ('return delivery')? Please check the material documents he/she claims to have booked as return delivery. (in MB51 you can get a list of all material movements of MVT 261 that belong to 'your user' and after that you can open the material document and check through which transaction the booking was made.)
BR
Csaba

Change of Movement type for Return delivery of Goods Issue doc in config

Hi SAP Gurus,
I am doing return delivery of goods issue document.then the system automatically pick the movement type
Like Example i am doing return delivery for Goods issue 201,the system should pick 202 but instead of 202 its picking 902 movement type which i defined.
Where exactly i have to change in configuration please let me know....
Thanks,
Sivakumar

In OMJJ, check the reversal movement maintained for the one your facing the issue.
If any further clarification is required, revert.
If helpful award points
Regards,
Vivek

Movement type 122 - return delivery

Dear gurus,
I have material type FHMI-PRTS.
During return delivery with movement type 122, system shows following messages.
qty balances are not sufficient in the register
Pl. elaborate in details,
Regrds,
Devendra

Hi,
Check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Incoming Excise Invoices > Specify Which Movement Types Involve Excise Invoices > Here check whether Movement Types are maintained.
Regards,
Manish

Configuration of return delivery ouput (122 movement)

Dear Friends,
I want to take print out of Return delivery document (MIGO, 122 Movement). Please guide me the procedure.
What is the meesage type to be used(Wa01 / WE01) ? Transaction / event type(WA / WE /WL) and print item(2). Please confirm to complete Output Configuration.
Thanks and Regards
Madhavan

GR/GI Print:
Go through these steps you can get the GRN Printout
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
Enter the local printer where you want to print your Goods posting document
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately

Return Delivery Error in MIGO while doing Movement type 122

Hi All,
I am doing MIGO Return Delivery to Vendor. I am getting the following Error. Pls help its urgent issue.
I have checked the stock level. The stock is sufficient for doing return delivery.
"Deficit of BA Unrestricted-use 1,575 MT : 20461615 2100 2131 MARCH2012"
Thanks IN Advance,
GANESH
Edited by: ganesh_pall on Sep 19, 2011 10:43 AM

HI,
Can you tell me the stocks are available in unrestricted use or any other use like blocked (or) quality inspection . check it once.
if the stocks are available in quality inspection first transfer the stock from quality inspection to unrestricted through t.code qa32
Then try to do the return to the vendor through migo
Edited by: A.Purihella on Sep 19, 2011 10:55 AM

Return Delivery movement 653 E

Similar Messages

Maybe you are looking for