Return delivery to vendor from GR-blocked stock

hi experts,
while doing return delivery from GR-blocked stock(migo) to vendor
it is asking for " reason for movement " in the Where tab,
but there is no list displayed to the select the reason
how to make list for that reason why nothing is available in list
how to retrieve the reason list
explain please
thanks
ganesh

hi
go to OMBS
here in control reason look for mov type 122 and 161 ,here u will find the reson is required
now come back and check reason for movement
here create new reasons for move type 122 and 161
1 poor quality
2 incomplete
3 damaged
this will solve ur problem
regards
kunal

Similar Messages

Transferring goods from GR blocked stock

Hi ,
how can i transfer goods from GR blocked stock to any stock type (unrestricted,quality or blocked) without affecting moving average price.
Regards

>
hima_1983 wrote:
> Hi,
>
> My client is importing a lot of items some of which is low value items , while receiving this type of items and explored some poor quality items , vendor will ask client not to return these rejected items back to hm but just scrap it and the vendor will send fresh items instead of these rejected items or the client will place a debit note to the vendor.
>
> Regards
Vendor does not want the material back, and for you this material is not okay with quality.
What are you doing physically with the material?
if you scrap it, then just cancel the goods receipt and the quantity is gone.
if you dont scrap it, then create a new material master type UNBW nonvaluated. reverse the goods receipt done to good material, then receive e.g. with 501 movement to the UNBW material

Regarding Return delivery to vendor

Dear Guru's,
While doing return delivery to vendor, i am facing an error
"Deficit of PU IR quantity 5.000 L"
Message no. M7021
Pls help me out..
Regards,
cherukuri

Hi Cherukuri,
Vendor Returns after MIGO & MIRO will be handled like this.
Create a Return Purchase Order with standard doc type NB and check the box Return Items in Po Detail tab.
Now Make a Goods Return receipt for the return po. Here 161 Mov type will be automatically takes place.
Now create a Credit memo for the Vendor using MIRO.
Please check the stock is there.
Reg,
Ashok
Rewards if helpful.

Return Delivery to Vendor vs Moving Average Price

Hi All!
Scenario:
1 - Imagine a PO with freight conditions. (Ex: Qty=10; Unit Price=10; Freight (Value)=10 from another vendor)
2 - Do the GR normally. (if it´s a new material should have a moving average price of 11)
3 - Return delivery to vendor of Qty=1 >> in the FI document it makes a movement of 10 (material cost)+1(related freight)
When I make the return the movement take into acount the related freight value (=1) . Is it possible to do the return of Qty=1 but the freight value increasing the moving average price?
Best regards,
Joã

HI ,
In this case , you can do Retunr PO with reference original PO and change the Price from Rs.100 to Rs150.
Then , Make GRN for the same and do the Credit Memo in MIRO transaction.
If any doubt , let me know.
With Regards
S.Siva

Difference between Return Delivery to Vendor - Against Material Document &

Hi,
Can any body explain in detail what is the difference between the below 2 scenarios-
Difference between Return Delivery to Vendor - Against Material Document & Return Delivery to Vendor - Against Returns PO
Thanks in adv
Reg
SSK

Hi,
Return delivery to Vendor against material document is done when you want to send the entire qty back to vendor and when your vendor invoice is not paid.
You create Returns order, when you want to return some qty for which you can not trace any material document.
For eg: During some festival season, you have purchased more stock. After that some stock is left with you which you would like to return to the vendor.
Or you have found them damaged at a later point of time.

BAPI for creating Return delivery to vendor using transaction MIGO

Hi All,
         My requirement is to create Return delivery to vendor using transaction MIGO.
In MIGO transaction to create return delivery, the following steps needs to be followed.
i) Select the option A02 Return delivery, R02 Material document,
    Enter Material document xxxxxxxx.
    Reson for movement:xxxx
    By selecting the option item ok and via delivery check box, then save.
After saving return delivery needs to be created.
Is there any BAPI/FM exist for this requirement?
I made lot of search in sdn, but i could not find any thing helpful.
Appreciate quick help.
regards
surya

Hi
In VL02n->Extras->Delivery Output->Header
Check if you see any message type (LD00 ?).
If you do not see any, insert a message type LD00.
If you want to check the IMG settings, see Txns : V/71 (for delivery types RL/RLL) and V/73 (for Item category RLLN)
Best regards
Ramki

Return Delivery to Vendor (Message- Determination)

Hai All........Assalamualium.
I want to Post a Return Delivery to Vendor using Mat.Doc.
Movemet 122. ok
this i am doing it Via Shipiing .
A Return Deliver to vendor is Created .
i can see it in VL03N.or in the PO History.
now i want to see the preview of the Document..i.e The Return Delivery
document and i want to send it along with the goods as a proof of delivery.
are there any setting for the Output Types that i have to do?..
plz Hlp me.

Hi
In VL02n->Extras->Delivery Output->Header
Check if you see any message type (LD00 ?).
If you do not see any, insert a message type LD00.
If you want to check the IMG settings, see Txns : V/71 (for delivery types RL/RLL) and V/73 (for Item category RLLN)
Best regards
Ramki

Return material to vendor from blocked stock

Hi!
I am going to use blocked stock (s) to lock low quality material.
How could I return it to vendor. Please give me document chain .
We use WMS and document flow must include outbound delivery.
Andrey Garsin.

Hi! Thank you for answer
Please provide more detals.
I need to manage two return scenarios:
1. stock was loaded into SAP system from old (non sap system). no purchase order in the system. stock was created with mvtye p 561.
2. Stock was recived from vendor using PO + inbound delivery + GR (101) . Now this stock need to be returned to vendor.
If you have a time please give me more detailed step (document flow and key steps inside document ) for both cases or link to help. I have found only this description http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm but it is too rough.
Andrey

After Return Delivery to Vendor cannot remove shipping notification in MD04

Hi.
Good Day.
I would like to ask help regarding to my issue.
We had to create a return delivery to send the goods back to the vendor A. The packaging item was blocked and we created the outbound delivery via transaction MBRL with reference to material document when we do GR with the inbound Delivery A. After having processed all necessary steps including the posting of the goods issue of outbound delivery, the inbound delivery A is again open and expects a goods receipt of the returned units. This can also be seen in MD04. Meanwhile the supplier has sent a new "compensation" delivery, with a different inbound delivery B. This was goods receipted and with this delivery the complaint/return process is finished from the supplier's and our point of view.
Problem: What remains is the original open inbound delivery A. Currently we have no idea how to get this one deleted, but we need to cancel it, because there won't be a credit note and there won't be another physical delivery for this inbound delivery A.
What I have done so far:
1) Tried using VL09 to inbound delivery A but there was no effects. probably because the inbound delivery A is already closed.
2) It is not possible to set the item of SA to finished because we my use that item again.
Thanks for your help.
Med'z

Hi Madhu.
Good Day.
First of all I really appreciate your response.
I tried to change the first inbound delivery but canu2019t do much. Because all fields were block since it is already completed.
The system shows the error "The goods movement status (partially or completely processed) does not allow the item to be deleted."
I also tried to change the schedule line but it didnu2019t do any effect with the issue.
Thank you,
Best regards.
Medel.

Return delivery to vendor is picking incorrect customer

Hi,
We are trying to return the material to vendor due to quality reasons, by creating a return delivery (T-code MBRL, Mvt.-122). We are performing this as under.
We have created this vendor as customer (say XXXXX) also, and assigned in vendor master, under control data view. Our expectation was that, the outbound return delivey should be created with customer master number XXXXX.
But system is creating the outbound return delivery with different customer master (say YYYYY). In fact we have used this customer number in PO item details--> Delivery address, to fill the PO's delivery address as customer's address. So while doing GR (with mvt-101), in material document this customer number has been copied as partner.
Then we tried to create the return delivery with T-code MBRL. But the system has created return delivery with customer YYYYY. But that should be created with XXXXX. As per our process we should use customer number in PO, for delivery address purposses. With out changing that, how can we correct this situation in our future transactions? Do we need to do any settings?
Kindly throw some light on this matter and suggest.
Thanks & regards,
Prabhakar.

Hi..... Mr Reddy u need not to do Shipping notification (inbound delivery) i think so.
After creation of STPO, just go for MB1B t.code, there u can directly transport the stock from one plant to another.
i think it will be useful for u.

Return Delivery to vendor

If the purchase is for 100 qty and having 4% VAT
But in case if partially delivered (50 qty)how the system will calculate tax.. and in the same case if i return 25 qty frm it..
how the system calculates the VAT.....

Hi,
If the purchase is for 100 qty and having 4% VAT
But in case if partially delivered (50 qty)how the system will calculate tax.. and in the same case if i return 25 qty from it..
how the system calculates the VAT.....
It is very simple it will calculate based on GR Qty
Assume iy order 100 Qty
100* 10= 1000
4% * 1000=40
It w ill shows in PO but if done GR for 50 Qty system will take in to account for 50 Qty only.
And same will appear in MIRO.
If you perform 122 return delivery and then post the vendor invoice MIRO. System automatically consider for 25 Qty and subsequently 4% VAT on that portion.
Regards

Enter tax code in return delivery to vendor

Hi everyone,
I have made a PO, GR, GI and a credit note, in that sequence, with no problem. However, when trying to create a return delivery to the vendor (movement 122), the system shows up the following error message: Enter a tax code.
Of course, the tax code has been informed into the PO, consequently brought to the other documents. Why is it not bringing the tax code to the 122? Is there anything else I have to do?
I would appreciate any help.
Regards.
Marcelo Buosi.

HI,
The tax accounts should be nullified right when you dont want the material.. You will be paying extra to the vendor on basis of tax when you are purchasing so when you are returning bac the material that material amount + the tax amount should come back from the vendor rite. that is the reason the system is asking for tax code so that it calculates the amount that as to come back from the vendor.
Thanks & Regards,
Kiran

Transfer from GR Blocked Stock

Hi
Is there any mvt type for transfer of stock from GR Blocked to Scrap etc.,
Becaz there shouldnot be any liability to be created to vendor
thanks,
prasad

Hi Kiran
Thanks
U are correct.
Here in my scenario we sent a <b>sc order to</b> a vendor and vendor sends us the material after completimg the process.
we dont have QM, and here stores people inspect the material and they send to scrap for any damaged or poor quality materials.Balance material will be transfered to Un restricted stock.
The payment will be made to vendor for only those materials which are transfered to Un restricted stock.
so i want to trasfer the material from GR blocked to scrap and GRIR balance also will be generated only for the material which are transfered from 103 to 105.
I hope i am clear to u
Thanks
Prasad

Sending Components to SC-Vendor from Sale Order Stock

Hi
Anybody can throw some lights on following Issue..
Our Customer is Placing Order with Us.It is an MTO Scenario.
The Product is Assembly
In that Assembly, we have to Send some components to our Sub Contracting Vendorand get back one HALB Product.
To create Sub Contracting POI have to create PO in ME21N with Item Category L and Acc.***.Category EHere In Item Details, Material DataThe BOM is getting Exploded..
Now I want to send my Components( Which is also belongs to Spl.Stock E) to my SC-Vendorin ME2OBut Here I am not getting any Selectionie) the Components which I want to send to my SC-Vendor based on that PO from Sale Order Stock E is not flowing in ME2O
Pl. Guide me How can I send components to my SC-Vendor based on my PO with Item Category L and Acc.***. Category E
Your Immediate response in this is highly appreciated
Regards
S.Baskaran.

use tcode MB1B with movement type 541 and choose TO PURCHASE ORDER and give the purchase order details here.
regards,
indranil

Vendor Payment for Blocked stock

Can we have control over vendor payment if stock is partly posted to unrestricted and partly posted to blocked stock?

As block stock is as good as you have accepted the vendors material so only way is to use
User exit LMR1M001 |User exits in Logistics Invoice Verification in MIRO-->this will provide additional blocks in MIRO

Return delivery to vendor from GR-blocked stock

Similar Messages

Maybe you are looking for