Return For Correction - SIT

Hello,
when approver go for return for correction (RFC) on SIT, the main SIT page opens where initiator can able to add new records and also able to update any existing SIT records. This thing not happen in Absence work flow where on RFC, user update only current record which is under consideration.
In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.
Thanks

In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.Ayaz
this is a very valid question .. and same thing happens with EIT as well. This happens because when you create or update EITs, SITs you can do more than one at a time at the time of creation/ updation. So when approver go to update action or send it back for return for correction you create/ update multiple EITs and SITs as all of that go in single transaction.
Let us know if you find any solution for this one.

Similar Messages

Workflow Return for correction RFC history not appearing

Hi -
I have built a custom new workflow in Oracle Learning Management.
I am using the workflow attribute WF_NOTE to capture the comments of the approvers.
When the approval moves from one approver to another, it successfully captures any comments made by the previous approvers and displays it to the next approver.
However, when any of the approvers click on return for correction ( RFC ) button and the notification moves to the creator, the approval history is blank and does not have the comments made by the approver about why he is returning for correction.
Any insight?
Thanks

In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.Ayaz
this is a very valid question .. and same thing happens with EIT as well. This happens because when you create or update EITs, SITs you can do more than one at a time at the time of creation/ updation. So when approver go to update action or send it back for return for correction you create/ update multiple EITs and SITs as all of that go in single transaction.
Let us know if you find any solution for this one.

Return for correction RFC history not appearing

Hi -
I have built a custom new workflow in Oracle Learning Management.
I am using the workflow attribute WF_NOTE to capture the comments of the approvers.
When the approval moves from one approver to another, it successfully captures any comments made by the previous approvers and displays it to the next approver.
However, when any of the approvers click on return for correction ( RFC ) button and the notification moves to the creator, the approval history is blank and does not have the comments made by the approver about why he is returning for correction.
Any insight?
Thanks

In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.Ayaz
this is a very valid question .. and same thing happens with EIT as well. This happens because when you create or update EITs, SITs you can do more than one at a time at the time of creation/ updation. So when approver go to update action or send it back for return for correction you create/ update multiple EITs and SITs as all of that go in single transaction.
Let us know if you find any solution for this one.

Return For Correction-EIT

Hello All,
We have registered an Extra Information Type and enabled security for Employee self service responsibility.Every thing is working fine except return for correction feature. Approver is able to return the notification for correction but when requester opens the returned notification and clicks on "Continue Action" link, he is not able to see the information type and getting note as "Under your current responsibility, no information types are available for this person"(May be this page is defaulted to some responsibility other than Employee self service ). He is not even able to see "Switch responsibility" list of values.
It seems i have missed something during setup. Kindly share some ideas to fix this issue and let me know if you need more information(Note that i am very new to this forum and this this my first thread)
Thanks
Dileep

In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.Ayaz
this is a very valid question .. and same thing happens with EIT as well. This happens because when you create or update EITs, SITs you can do more than one at a time at the time of creation/ updation. So when approver go to update action or send it back for return for correction you create/ update multiple EITs and SITs as all of that go in single transaction.
Let us know if you find any solution for this one.

Return for correction from asynchronous page

HI ,
I have a process for Contingent Worker Placment. I am initiating the process and have 2 approvers in the supervisor hirerachy.
but requirement is that after these 2 approvers we need to have the final approval from another team. but they ll not get any notification. I ll put all the transaction details into the table n show that to the use. from there the approval group can do multiple actions like Return for Correction, approval, rejectiion etc.
To achive this , I have blocked the workflow after 2 approvers.After this the txn details are put into the table from where the final approval group can either select approve , reject or Return fo rCorrection. When they click on Approval, the workflow blocked activty will be compelted with a result of Approve and if they click reject it will complete activity with reject status.
Bothe are wokring fine. but RFC is not working. From the Admin group, I am able to launch the RFC page, but from there not able to complete the blocked activity of workflow and resume workflow as the RFC CO is a seeded CO>
please advise.
Regards,
Preeti

Dear Priyanka,
Please refer following Metalink Doc ID's it will resolve your problem:
1. Return For Correction Errors With "You Have Insufficient Privileges For the Current Operation. Please Contact your System Administrator." (Doc ID 1072042.1)
2. Error When Users with no Responsibility Use Return For Correction (Doc ID 1381514.1)
Regards,
Kathan Bhatt
*** Kindly mark Helpful/Correct if satisfied ***

Return for correction

HI ,
I have a process for Contingent Worker Placment. I am initiating the process and have 2 approvers in the supervisor hirerachy.
but requirement is that after these 2 approvers we need to have the final approval from another team. but they ll not get any notification. I ll put all the transaction details into the table n show that to the use. from there the approval group can do multiple actions like Return for Correction, approval, rejectiion etc.
To achive this , I have blocked the workflow after 2 approvers.After this the txn details are put into the table from where the final approval group can either select approve , reject or Return fo rCorrection. When they click on Approval, the workflow blocked activty will be compelted with a result of Approve and if they click reject it will complete activity with reject status.
Bothe are wokring fine. but RFC is not working. From the Admin group, I am able to launch the RFC page, but from there not able to complete the blocked activity of workflow and resume workflow as the RFC CO is a seeded CO>
please advise.
Regards,
Preeti

Check the Node attributes in the Return for Correction process through workflow builder. That should tell you where it will be sending the email.

Talent Management - Return for Correction

Hi,
When the manager clicks on "Delete" button on the Return for Correction notification, the appraisal of the employee gets lost. How to avoid this? Is any way to personalize this delete button? If it is a standard functionality, how could we rollback the lost record?
Thanks in advance

I'm afraid this is standard functionality. It might be changed in R12. I try to remove the possibility of this happening by removing the function. But, unfortunately, this affects all notifications.

Workflows - reminders / Approvals / return for correction etc

Hi
Can anyone help, We are trying to set up an automated Business Process Matrix, bascially we have people that need to submit reports (annually / Monthly / Quarterly) and we want to be able to
Send them an email say 1 week before the due date (and then another say 2 days before due date.
When they submit the document I want to be notified that they've uploaded the document to a business process list and be able to approve it or return for correction
Last but not least – would like to be able to keep a historic library of the documents
Looked on google and can see how to do it with sharepoint designer – easy – but our company have denied us access to it – and we have to pay a team to do anything in designer !!!!

hi,
You're stuck without SPD for the first requirement, but I’m sure your specialised team would welcome a bit of direction :). My comments in bold
“Send them an email say 1 week before the due date (and then another say 2 days before due date"
You can use the ‘Information Management Policy’ method as described in
this blog article by Laura Rogers (it’s for MOSS and WSS but works in SP2010 also). SPD required. Alternative is custom timer job which would be dev – not ideal.
"When they submit the document I want to be notified that they've uploaded the document to a business process list and be able to approve it or return for correction"
You could use a standard ‘out of the box’ approval workflow for this. No SPD required.
"Last but not least – would like to be able to keep a historic library of the documents"
The library that the documents would be uploaded to could also function as a historic library of the documents. Perhaps your default view could only include recently uploaded documents. No SPD required. Some useful info
here.
Cheers
Matt

"Return for Correction" button in SSHR approval notification directing to External URL

In SSHR approval workflow notification mail, if we click on "Request for Correction" button, an incorrect URL is loaded.
1 - Where should this be setup to direct to the particular notification in workflist in Oracle page?
2 - How can we remove this functionality in the notification?
Thanks,
Sumanth

Check the Node attributes in the Return for Correction process through workflow builder. That should tell you where it will be sending the email.

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites.

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites. I am running v 3.6.18

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

I have one problem and I think it is a settings issue. When I google the web I get results. Now, when I visit some website and I return to my search results I don't have any markers (diffrent link colour for visited sites in IE).

Question
I have one problem and I think it is a settings issue. When I google the web I get results. Now, I visited some website and then I want to return to my search results and pick another search result. And there is a problem: I don't have any markers (diffrent link colour for visited sites in IE) that would help me to distinguish visited and not visited sites.

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

Certificate does not contain the correct site name

Hello,
I have to make a midlet that connect to a tomcat 5.5.9 server with ssl.
I import the certificate whit tomcat alias in the wireless toolkit but when i run the midlet this error appear: Certificate does not contain the correct site name
import java.io.*;
import javax.microedition.midlet.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
public class HelloNet extends MIDlet implements CommandListener , Runnable{
// User interface command to exit the current
// application.
private Command exitCommand = new Command("Exit",
Command.EXIT, 2);
// User interface command to issue an HTTP GET
// request.
private Command getCommand = new Command("Get",
Command.SCREEN, 1);
/// The current display object.
private Display display;
// The url to GET from the 'net.
private String url;
* Initialize the MIDlet with a handle to the
* current display.
public HelloNet() {
url = "https://127.0.0.1:8443/Hello.txt";
     display = Display.getDisplay(this);
* This lifecycle method should return immediately
* to keep the dispatcher
* from hanging.
public void startApp() {
     showPrompt();
* Display the main screen.
void showPrompt() {
String s = "Press Get to fetch " + url;
TextBox t = new TextBox("Http Result", s,
s.length(), 0);
t.addCommand(exitCommand);
t.addCommand(getCommand);
t.setCommandListener(this);
     display.setCurrent(t);
* pauseApp signals the thread to stop by clearing
* the thread field.
* If stopped incorrectly, it will be restarted from
* scratch later.
public void pauseApp() {
* destroyApp must cleanup everything. The thread
* is signaled
* to stop and no result is produced.
* @param unconditional is a flag to indicate that
* forced shutdown
* is requested
public void destroyApp(boolean unconditional) {
* commandAction responds to commands
* @param c command to perform
* @param s Screen displayable object
public void commandAction(Command c, Displayable s) {
     if (c == exitCommand) {
     destroyApp(false);
     notifyDestroyed();
     } else if (c == getCommand) {
          Thread th= new Thread (this);
          th.start();
* Read the content of the page.
public void run() {
TextBox t = null;
StringBuffer b = new StringBuffer();
HttpsConnection c = null;
InputStream is = null;
     try {
     int len = 0;
     int ch = 0;
     System.out.println("Cerco di leggere");
c = (HttpsConnection)Connector.open(url);
c.setRequestMethod(HttpsConnection.GET);
     is = c.openInputStream();
// length of content to be read.
len = (int) c.getLength();
if (len != -1) {
// Read exactly Content-Length bytes
for(int i=0; i<len; i++) {
if((ch = is.read()) != -1) {
b.append((char) ch);
} else {
// Read until connection is closed.
while((ch = is.read()) != -1) {
len = is.available();
b.append((char) ch);
t = new TextBox("Https Result", b.toString(),
b.length(), 0);
     } catch (Exception e) {
e.printStackTrace();
String s = e.toString();
if(s != null) {
t = new TextBox("Https Error", s, s.length(),
0);
} finally {
if (is != null) {
     try {
          is.close();
     } catch (Exception ce) { }
if (c != null) {
     try {
          c.close();
     } catch (Exception ce) { }
display.setCurrent(t);
}

re: code tags, please see http://forum.java.sun.com/help.jspa?sec=formatting.
As for the rest:
See, we now know that you used keytool to generate you certificate. You need a new certificate. This time, when keytool asks you for a first and last name, type 127.0.0.1.

Set alias URL for SharePoint site

Hi,
I want to set the SP site alias. my server name appearing http://dmfpqabudappcq2 and i want to change it to http://MySharePoint.
I check the central admin - AAM - Edit alias url. I have updated there.
Now, i am setting the new alias host in DNS. for this i have open the DNS - expands server name - Forward Lookup zone. When i go for right click then i can not see to add new alias and server IP there.
Can anyone please tell what i am missing here to complete the setting for SharePoint alias.
Any help is much appreciated.
Thanks,
Rakesh

I've never trusted changing a Web App's URL. I always advise adding a new AAM for http://intranet etc. alongside your already existing server name.
I would return the inital entry to as it was, then add a new AAM for your site.
Now if i understand you correctly you haven't added an A host record for the AAM address to DNS yet? This is described here:
http://technet.microsoft.com/en-us/library/cc779029%28v=ws.10%29.aspx
Once you have an A host record you should be able to 'ping' that address from a client computer. You should also be able to browse the site from a client computer (assuming there's a site collection created for that web application).
You will not however be able to browse it from your SharePoint server, this is because of the loop back check:
http://www.harbar.net/archive/2009/07/02/disableloopbackcheck-amp-sharepoint-what-every-admin-and-developer-should-know.aspx

Using a Single Library for Entire Site and When to Use Subsites

I'm hoping a discussion I am having with my coworkers can be solved. We are trying to decide two things:
Should the entire office be under a single site or should each division have their own site? Our Office has 5 divisions that contain 17 Branches, one site for business functions and one top-level site for the entire office.
Is it standard practice to create one huge library managed by metadata or should there be multiple libraries? I tend to think one library will be too hard to manage with regard to metadata and site columns and that libraries should be based on business
functions or subject domains (i.e., SOPs, Quality Documents, Business Documents, Technical Documents, etc).
Currently, several workflows, libraries and lists have already been created under our business functions site. In order to house everything under a single site, we would need to change the name of the site and move everything under it. I'm not
sure if changing the name of the existing site will cause problems.
I group these two items together because they really seem related. With everything under a single site, individual libraries, lists and workflows could get out of hand as everyone tries to manage their own division. But then so would a single
library for everyone. The problem with more than one site is that data cannot flow freely between sites (via workflows) and search would be less effective so some are against separate sites. So knowing one question may affect the answer for the
other.
Any thoughts on our library and site structure would be appreciated. Thanks.

As always the usual SharePoint consultant cop-out answer of 'it depends' is correct.
Having said that there are certain trends that are quite relevant:
It isn't common to use a single site collection for all sites. It can be done but it often leads to a state where you have a single monstrous site collection which is harder to backup, recover and maintain (see the boundaries and limits documents). The
default behaviour in most cases is to have a central 'shared' site collection then one per <group> where Group is a team that works on the same content, has broadly the same area of interest and access. That might be one for HR, one for the Support team,
one for the Sales team etc.
In terms of libraries there's a wide variation. If there' no difference in views, security and metadata then keeping the library count down is generally a good thing. However using multiple libraries can make life easier and better for users by allowing
more useful views, more secure by locking down libraries rather than using item level permissions (always a nightmare) and allowing more useful alerts and so on.
SharePoint architecture is a science but it's a really, really hard one to formulate into If/Then rules. So, broadly answering your questions I would lean towards multiple site collections and I generally agree with you on point 2, although if there's only
a small number of documents and simple structure then a single library might still make sense.

How to get the number of decimal places configured for a site column

Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijit

Get the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

Return For Correction - SIT

Similar Messages

Maybe you are looking for