Return Free Items should copied into the invoice.

Dear All,
We created a return sales order with two line items.First line item is REN and second line item is RENN item category type.When we created the sales order at that time RENN was not billing relevant.(in VOV7).I have made the delivery and did the PGR. Now the client requirement is they want RENN should copied into the invoice.So now i changed in VOV7 for RENN item category and tried to invoice that open Delivery.But the system is still not copying the return free items into the invoice.
So what changes do i neeed to do in return delivery document or return sales order so that free item should reflect in the invoice.
Regards
Debasish

Hi
Can you check the status of the free return item (Renn)in the delivery and run the below report
RVDELSTA
if the above report is not updating then kindly take the help of Abaper to create a program to update the same ,please find the
program below:
TABLES: VBFA.
data: cnt like sy-tabix.
SELECT SINGLE * from vbfa where VBTYP_N = ' ' and vbelv = ' '.
if sy-subrc = 0.
UPDATE vbfa SET PLMIN = ' ' where vbelv = ' ' and vbtyp_n = ''.
endif.
KIndly check the ossnote 445763
Regards
Damu

Similar Messages

In return order price should copy from the invoice

Dear All,
Greetings for the day,
We are facing with the below issue, please help to resolve the issue.
We have one discount condition type; scales have been maintained for that condition type.
The scales are like below
Up to 10,000 liters - 0%
Above 10,000 liters - 5%
If the quantity coss 10,000 liters then 5 % discount will apply. If the quantity falls below 10,000, then 0% discount will apply.
In one order, quantity has been crossed 10,000 liters and 5% discount has been applied,
Customer has returned 500 liters. For this return quantity, business creating the return order with the quantity 500 liters with reference to the Invoice, then system giving the 0% discount as per the scales. It should not happen; business should get back the discount amount for the 500 liters.
The system should copy the price from the invoice instead of redetermining the price in the return order.
I have tried with the 'Pricing Type' D (Copy pricing elements unchanged), but it is not working. System redetermining the price in return order.
Please suggest resolving the issue
Thanks in advance,
Sridhar,
+919676882525.
Edited by: Sridhar Alleni on Mar 27, 2011 10:41 AM

Dear Saju,
Thanks for your response,
We are also tried with the routine 'Alternate calculation type', based on this logic system will get the condition amount from invoice and multiply with the return order quantity. Based on this logic, while creating the return order the discount condition type amount calculating as excepted but if we save the return order, condition type is re-determining and overwriting with scale values.
Please suggest any idea to restrict the pricing re-determine in the return order.
Thanks,
Sridhar.

Text to be copied into the invoice

I have written at the header texts of the delivery (which I have created with VL01N) the "English invoice no" manually. I want this English invoice no to be copied into the header texts of the invoice (which is created with VF01). At each seperate delivery there will be a different invoice number. How can I have the text copied into the header texts of the invoice?
Thanks in advance...

Hi,
If we want to copy the delivery text into the invoice then the text must be defined in delivery as well as invoice header or item which ever is required.
Thanks

All items are copied into Credit Memo request

*Dear All*
*Suppose I have created one scenario in which there is material code with one free goods and run uto the billing.*
*I just need to know while creating Credit memo request wth reference to Billing,All items are copied into the sales order.My concern is that we can not hide free goods item in return order through Item selection.*
Plz suggest on that issue

Hi
Yes you can set it up in the copy control of the item category so that it is not copied in the return order. But there is a specific reason why SAP would copy it into a return order. Suppose you sell goods and give something free, then based on the principle that the goods which were free were sent with the charged goods, it is expected that if the charged goods are sent back the free goods should also be returned.
Thanks
Indranil

Custom duty should be copied into the Sales order based on material

Hi,
Requirement is only Custom duty Tax condition types to copied into the sales order based on material (for e.g A) .Suppose customer X is buying material Y then different tax condition types is to be applied but if the same customer is buying material A then only Custom duty will be copied.
But we can set in the customer Master whether the maerial is taxable or not.So where to do the right tax classification settings so that sysyem will automatically fetch the right tax condition types if i enter one material which is applicable for Custom Duty only
We are using TAXINJ.
Regards
Jyoti

Dear Jyoti
As per your post, the material code is different for the same customer and hence you can differentiate the tax classification in material master. That is for material X, if you maintain Tax classification 1 in Sales Org1 view, maintain 2 for the material Y.
Now maintain different tax code for these tax classifications in VK11 / UTXJ.
thanks
G. Lakshmipathi

Amount is not coming into the Invoice for Warranty Order

Salute All !!
Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
Please provide solution.
Rgds
Srivastav
+91-9973504950

Hi,
Because you are not billing to customer the net amount is zero-
You can do like bill the component as regular item and give credit note against it.
or else create seperate billing output type assign this to proforma invoice- print the cost of item by pulling it in new smart form.
(this is not very good idea because , customer knows the actual cost of the item)
Thanks
Chidambaram

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

Attached document in PR cannot copied into the PO

hi,
i am creating a purchase order with reference to purchare request. all the item from the pr is copied into the po (eg. description,qty, etc) except the document attached in the pr.
is there anyway this can be configure whereby the attached document in the pr through the service object will also be copied in the purchase order during po creation.?
appreciate all the help. thanks
she

Hi,
If you pasting the texts in Item Texts you will get the same in PO also it will be printed in Po also.
Please check the same.
Regards,
Mohd Ali.

Print Copy on the Invoice

Guys,
I have a requirement where I need to print word "Copy" on the invoice. In my O/P condition I have Number of copies maintained as 3, the first should be original and the subsequent two should have "Copy" mentioned on the top. I have used this funcationality earlier using some Z tables and programs but don't remember it now.
Can you guys advise if this is something available in SAP and needs no development?
Thanks

Hi friend,
This you can done with the some logic
The outputs will be stored in the NAST table, in this table you can findthe status of the messages
like processed or not processed
I hope you are using the batch job for processing the output messages and once the outpt processes then automatically it will goto printer.
Now , u can find the output messages in green status and in the NAST table u can find the message as processing mode with Option 1.
If you want to get the second copy again you need to do REPEAT output and again it will save in the nast table with the non processed state until it is processed state.
So u can get the outputs in the NAST table with all the out puts which are done/triggered with the repeat option
hope it is clear,
if u have any frther doubts
please revert
regards

HOW to include the needed libraries to be copied into the self-cotained app

I'm using: Netbeans 7.2, JavaFX 2.2, JDK 7u7. First, I believe the instructions posted at http://docs.oracle.com/javafx/2/deployment/self-contained-packaging.htm#A1349508 are off (when dealing with NetBeans, at least), as the resulting bundle copies the dependent libraries (3rd party) to the root where the main .jar file is placed, but the MANIFEST gets JavaFX-Class-Path with the lib/ prefix.
This is what I have added to build.xml in the project's folder:
   <target name="-post-jfx-deploy">
        <fx:deploy verbose="true" nativeBundles="image" outdir="${basedir}/${dist.dir}" outfile="${application.title}">
            <fx:application name="${application.title}" mainClass="${javafx.main.class}"/>
            <fx:resources>
                <fx:fileset dir="${basedir}/${dist.dir}" includes="*.jar"/>
                <fx:fileset dir="${basedir}/${dist.dir}/lib" includes="*.jar"/>
            </fx:resources>
            <fx:info title="${application.title}" vendor="${application.vendor}"/>
        </fx:deploy>
    </target>This is the tree structure of the dist folder after Clean and Build Project has been triggered by NetBeans:
│   JFXA.html
│   JFXA.jar
│   JFXA.jnlp
│
├───lib
│       log4j-1.2.16.jar
│
└───web-files
        dtjava.js
        error.png
        get_java.png
        get_javafx.png
        javafx-chrome.png
        javafx-loading-100x100.gif
        javafx-loading-25x25.gif
        upgrade_java.png
        upgrade_javafx.pngAnd this is the structure of the created bundle (conents of the JRE runtime omitted):
└───JFXA
    │   JFXA.exe
    │   JFXA.ico
    │
    ├───app
    │       JFXA.jar
    │       log4j-1.2.16.jar
    │       package.cfg
    │
    └───runtime
        └───jreProblem is, when I run the application (the *.exe* inside the bundle) it tries to run the main *.jar*, but fails due to the inability to locate compile-time libraries. Apparently, this behavior is due to the MANIFEST of the *.jar* being linked to the folder named lib (defaults), but the build script copies the libraries to the output dir where the actual *.jar* resides (dist). How can I fix this? Thanks.
I think I have ran into the same problem as here: javafxpacker - include libs
Edit*:
Upon .jar extraction and further inspection of the MANIFEST file, I see this:
JavaFX-Class-Path: lib/log4j-1.2.16.jar
Currently, as mentioned above, the libraries end up in the root folder where the main .jar resides, due to:
*<fx:fileset dir="${basedir}/${dist.dir}/lib" includes="*.jar"/>*
So, my question is, what do I need to change in order to get the dependent libraries to be copied into the correct path (with lib prefix), when building a bundle? The *<fx:fileset>* does not seem to support anu attribute that would specify the output path structure..

Use
             <fx:resources>
                <fx:fileset dir="${basedir}/${dist.dir}" includes="*.jar"/>
                <fx:fileset dir="${basedir}/${dist.dir}" includes="lib/*.jar"/>
            </fx:resources>or simply
      <fx:fileset dir="${basedir}/${dist.dir}" includes="**/*.jar"/>Filed http://javafx-jira.kenai.com/browse/RT-24757 to update the docs.
Edited by: igor on Sep 5, 2012 2:23 PM

HT1386 hi, when i am syn my books from my mac to ipad even after one full day sync itunes show wait for items to copy and the books in ipad are still not fully loaded. how do i fix this, i have a large collection of books

hi, when i am sync my books from my mac to ipad even after 24 hours sync, itunes show "wait for items to copy" and the books in ipad are still not fully loaded.
how do i fix this, i have a large collection of books around 12000 books

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

Onetime vendor - address is not copied into the purchase order ME21N

Dear all,
I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
So my question is if anybody can propose a solution for this.
Best regards, LB

>
Lars Birk wrote:
> Dear all,
>
> I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
> My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
> So my question is if anybody can propose a solution for this.
>
>
> Best regards, LB
One time vendor can never hold vendor specific details i.e. vendor details and bank details. You cannot use a one time vendor for ME59, use regular vendor account instead for your requirement or enter the address manually at time of conversion as per the message.
Edited by: Afshad Irani on Jul 13, 2010 1:34 PM

VAT /CST% manually in the sales order,not getting copied to the Invoice

Dear Friends,
If I change the VAT /CST% manually in the sales order,its not getting copied to the Invoice
Thanks
Ivy

Dear Friends,
Thanks for your valuable inputs....
I have maintained the condition record for the combination of delivery plant region and the customer region.......assigned dummy tax code against the Tax condition...therefore I think there wont be any problem in posting billing doc to accounting doc.
There are different combinations,where sometimes the user is liable for 2% CST ....sometimes 4%CST... but I am able to pick one tax value say 12.5% CST across and maintained the tax condition types - manual entry has priority, as allowed the user to change the value manullay as per the user requirement ....
Now if i change the Tax condition value in the sales order ,the same is not reflecting in the Invoice....this also is applying from contract to a sales order...
Please advice me accordingly...
Thanks
Ivy

[svn:fx-trunk] 8190: make sure the HaloClassic theme is not copied into the package b/ c it is no longer supported in flex 4

Revision: 8190
Author:   [email protected]
Date:     2009-06-24 12:26:02 -0700 (Wed, 24 Jun 2009)
Log Message:
make sure the HaloClassic theme is not copied into the package b/c it is no longer supported in flex 4
bug: https://bugs.adobe.com/jira/browse/SDK-20729
qa: no
doc:
checkintests: pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-20729
Modified Paths:
    flex/sdk/trunk/build.xml

Gordon, it looks like its been a while since you made this post. Not sure how valid it is now...   I am particularly interested in the LigatureLevel.NONE value. It seems that it is no longer supported.
How do I turn of ligatures in the font rendering?
My flex project involves trying to match the font rendering of Apache's Batik rendering of SVG and ligatures have been turned off in that codebase. Is there any way (even roundabout) to turn ligatures off in flash?
Thanks,
Om

How to save the item without displaying into the Page

hi
I have the reqt to save the item without displaying into the Page.
thanx

In your yyy Table View Object create one attribute for BusinessGroupId as you want to save it in your yyy table VO.
Now on click of save button capture this ViewObject and set this VO Attribute at run time. I am assuming that yyytableVO is EO based.
Snippet
Controller PFR Code
OAApplicationModule am = pageContext.getApplicationModule(webBean);
pageContext.getParameter("Save") != null)
OAViewObject vo = (OAViewObject)am.findViewObject("yyyTableVO");
if (vo != null)
vo.getCurrentRow.setAttribute("BusinessGroupId", value);//value is what you have capture from pageContext.getparameter
}Thanks
--Anil

Return Free Items should copied into the invoice.

Similar Messages

Maybe you are looking for