Return from a sub vi

Hi,
I am trying to return from my sub-vi to my main vi with no success.
in the sub-vi i connect the STOP button to a STOP sign .
i am attaching my vi .
CTM-config - main vi.
CTM-Main - sub vi
Thanks
Asaf
Attachments:
CTM-Main.vi ‏221 KB
CTM-Config.vi ‏286 KB

I don't understand why it can cause a problem ,the vi is waiting for events and if it gets the STOP - change value event  it needs to "do"
the event  and to stop/close the vi (sub-vi).
As long as there are other loops running, it can't finish (unless you use the STOP-function). So you have to select a file.
can there be any other reason (maybe configuration of the LAB-VIEW or something else ?
This might be a reason - I use LV7.0 full version (Developer Suite).
I also just found the following: If I start CTM-Config.vi and just once select "PCI charactarisation mode" and then select another value, CTM-Main is opened twice.
I attach the vi's I tested. Don't replace your original ones because I deleted some subvis.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
CTM-Config_test.vi ‏286 KB
CTM-Main_test.vi ‏195 KB

Similar Messages

  • Return of scrap from vendor Sub contracting

    Dear gurus
    Pls advice me on how to map this scenario
    we are sending two raw materials to subcontractor for a semi finished product. during the process scrap is also generated which is of value to the organization and they need to receive it from the sub contractor.
    now hot to work on this scenario
    your valuable advice is greatly appreciated
    regards
    John

    Hi,
    create a material master record for the scrap material. Maintain the scrap material with a negative quantity either in the BOM or in the material components while creating the subcontracting PO.
    Post the components to Vendor's stock with movement type 541. Later send the materials to vendor physically. While receiving the materials (Goods Receipt) w.r.t.the sub contracting PO with MT 101, the following postings happen,
    components will be posted with movement type 543 ( - ) and the scrap with MT 545 'O' (stock category) [MT 545 - material lying at Vendor's location]. Later u can take back this scrap material from the vendor with movement type 542. This is the complete procedure in terms of goods movements.
    Don't forget to Reward, if found useful.
    Regards,
    Varma

  • Why do I get a 'Certutil: A referral was returned from the server' error when trying to publish my renewed Offline Root CRL to AD?

    Hi,
    I renewed my Offline Root CA and now trying to publish the CRL to AD on my Sub Issuing CA with the Certutil -dspublish command, however I get a 'Certutil: A referral was returned from the server' error.  Kinda makes sense cause the Offline Root CA is
    not on the network, so then how do I publish my renewed CRL to AD given this?
    Thanks for your help! SdeDot

    Looks like your CRL do not include Active Directory container specification and certutil don't know where to publish the CRL.
    Does root CA define LDAP url in CDP extension? If not, then you don't need to publish CRL in Active Directory, because no one will use it.
    Vadims Podāns, aka PowerShell CryptoGuy
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell File Checksum Integrity Verifier tool.

  • Best way to refresh page after returning from task flow?

    Hello -
    (Using jdev 11g release 1)
    What is the best way to refresh data in a page after navigating to and returning from a task flow with an isolated data control scope where that data is changed and commited to the database?
    I have 2 bounded task flows: list-records-tf and edit-record-tf
    Both use page fragments
    list-records-tf has a list.jsff fragment and a task flow call to edit-record-tf
    The list.jsff page has a table of records that a user can click on and a button which, when pressed, will pass control to the edit-record-tf call. (There are also set property listeners on the button to set values in the request that are used as parameters to edit-record-tf.)
    The edit-record-tf always begins a new transaction and does not share data controls with the calling task flow. It consists of an application module call to set up the model according to the parameters passed in (edit record X or create new record Y or...etc.), a page fragment with a form to allow users to edit the record, and 2 different task flow returns for saving/cancelling the transaction.
    Back to the question - when I change a record in the edit page, the changes do not show up on the list page until I requery the data set. What is the best way to get the list page to refresh itself automatically upon return from the edit-record-tf?
    (If I ran the edit task flow in a popup dialog I could just use the return listener on the command component that launched the popup. But I don't want to run this in a dialog.)
    Thank you for reading my question.

    What if you have the bean which has refresh method as TF param? Call that method after you save the data. or use contextual event.

  • My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    Hello SamSax
    Check out the assist page below for troubleshooting call connectivity.
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Returning from a JSF flow with faces-redirect

    I'm using Glassfish 4.1 with JSF 2.2.9. I can't figure out how to return from a JSF flow with a redirect. I've tried this in the flow definition xml:
    <flow-return id="returnFromFlow">
        <from-outcome>/index.xhtml?faces-redirect=true</from-outcome>
    </flow-return>
    This does the redirect but results in navigation errors on the page, specifically the button that enters the flow again: "Unable to find matching navigation case from view ID '/index.xhtml' for outcome 'select-person'" (the flow is called select-person).
    I've also tried appending faces-redirect=true to the action of the commandButton that exits the flow. Now the flow does not exit, it reloads the current page within the flow and says "Unable to find matching navigation case with from-view-id '/select-person/select-person.xhtml' for action 'returnFromFlow?faces-redirect=true' with outcome 'returnFromFlow?faces-redirect=true'"
    Exiting the flow with h:link works, but I want to be able to call an action and submit form values with the button so that isn't a good workaround for me.
    What's kind of interesting is that navigating between views within the flow DOES work with faces-redirect=true. I can add a "step2" node, and a commandButton with action="step2?faces-redirect=true", and it works. It's just exiting the flow that does not work.
    Any ideas?

    Hi Frank,
    Thanks so much for your response.
    Yes, since the user can do a commit prior to exiting my edit task flow, option 1 will not work for me.
    Option 2 sounded feasible, but jdeveloper would not let me set the restore point to true, since my btf didn't require a transaction. Is there a step I'm missing here??
    The thing that is really getting me when return via the cancel button from this edit task flow, back to my parent task flow, the record pointer is always moving back to the beginning of the data set in my parent task flow. For example,if I have a data set
    rec1, rec2, rec3..
    On my parent taskflow call it browser task flow, I navigate (via the next button) to rec3, and I click edit. At this point, my edit task flow kicks off, and since both task flows share the same data control, the edit task flow rec pointer is the same as the browse one.
    Okay I decide I don't want to change anything in my rec3, so I click cancel.
    At this point, when I return back to the navigator task flow, it points me back to rec1 ..
    HOwever, the savepoint seems to fix this. When I set my cancel return from edit taskflow to savePoint = true, the rec pointer stays in the correct spot. However, I cannot always do this, because the user can make iterative saves in the edit task flow which (based on your previous email) stales out the savepoint id.
    Question, so in this case, how can I make the parent browser task flow call stay on the same record I was just editing, opposed to going back to the beginning of the data set(ie. rec1)??

  • How to Customize the Message "No Row Returned" from a Report

    Hi,
    I've been trying to customize the Message "No Row Returned" from a Report.
    First i followed the instructions in Note:183131.1 -
    How to Customize the Message "No Row Returned" from a Report
    But of course the OWA_UTIL.REDIRECT_URL in this solution did not work (in a portlet) and i found the metalink document 228620.1 which described how to fix it.
    So i followed the "fix" in the document above and now my output is,..
    "Portlet 38,70711 responded with content-type text/plain when the client was requesting content-type text/html"
    So i search in Metalink for the above and come up with,...
    Bug 3548276 PORTLET X,Y RESPONDED WITH CONTENT-TYPE TEXT/PLAIN INSTEAD OF TEXT/HTML
    And i've read it and read it and read it and read it and can't make heads or tails of what it's saying.
    Every "solution" seems to cause another problem that i have to fix. And all i want to do is customize the Message "No Row Returned" from a Report. Please,...does anyone know how to do this?

    My guess is that it only shows the number of rows it has retrieved. I believe the defailt is for it to only retrieve 50 rows and as you page through your report it retrieves more. So this would just tell you how many rows was retireved, but probably not how many rows the report would contain if you pages to the end. Oracle doesn't really have a notion of total number of rows until the whole result set has been materialized.

  • Reading User Profile Properties pragmatically in SharePoint 2010 Returns Null Values Although it has values returned from AD

    Reading User Profile Properties pragmatically in SharePoint 2010 Returns Null Values Although it has values returned from AD
    I configured the user profile service application and run Sync and user profiles and its properties returned from Active directory but when I want to read it pragmatically it returns null values.
    this is my code...
       void runQueryButton_Click(object sender, EventArgs e)
               // Get the My Sites site collection, ensuring proper disposal
                using (SPSite mySitesCollection = new SPSite("http://sp/my"))
                    //Get the user profile manager
                    SPServiceContext context = SPServiceContext.GetContext(mySitesCollection);
                    UserProfileManager profileManager = new UserProfileManager(context);
                    UserProfile profile = profileManager.GetUserProfile("Contoso\\user");
                    foreach (Property prop in profileManager.Properties)
                       // if (prop.Name == "Department")
                        resultsLabel.Text += prop.DisplayName + ":" + profile[prop.Name].Value + "<br />"; ;

     Hi,
    Please try with the following code
          PrincipalContext principalContext = new PrincipalContext(ContextType.Domain);
                                SPServiceContext context = SPServiceContext.GetContext(site);
                                UserProfileManager profileManager = new UserProfileManager(context);                        
      foreach (Property prop in profileManager.Properties)
                       // if (prop.Name == "Department")
                        resultsLabel.Text += prop.DisplayName
    + ":" + profile[prop.Name].Value + "<br />"; ;
    Thanks,
    Vivek
    Please vote or mark your question answered, if my reply helps you

  • No data return from BI7 via MDX drvier in Crystal report

    I have:
    Windows 2000 SP4
    SAP BI7 patch level 16
    SAP GUI 710 patch level 7 (BW3.5 addon patch 3, BI 710 patch 5)
    Crystal report XI R2 SP4
    SAP_Integration_Kit_XI R2-SP4
    and the BW tranports already imported in BI7.
    I can create a report over a Bex query in Crystal report using BW Query driver and retirved datafrom BI7
    Then I tried to create a report over the same Bex query in Crystal report using MDX driver, I got no data return from BI7.
    So I used the RSRTRACE transaction to trace the log when refreshing data in Crystal report, and then go to debug the call 10- GET_CELL_DATA and I have data from the MDX excution in BI7.
    So I think Crystal report can pass the MDX query to BI7 and BI7 can excute it without any problem, the issue is no data return to Crystal report.
    Could anyone help please?
    Thanks.

    [HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\SAP]
    "TraceDir"="C :\\Crystal Report\\"
    [HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\SAP\BW MDX Query Driver]
    "Trace"="Yes"
    "ExcludeSummaries"="Yes"
    Above are the right code in Reg and I have tried "C:\" as well, but still no trace file created.
    I was create the CR MDX report via SAP tool bar (and I create 2 reports base on the same Bex query with MDX and BW query just to compare, that one via BW query return data from BW)
    Thanks a lot.
    Allen
    Edited by: Wen Allen on Aug 25, 2008 5:32 PM

  • Is it possible to pass a formula value from a sub-report to a main report

    Hi there,
    Im trying to pass a formula value from a Sub-report back upto into my Main report but the value doesnt seem to be getting passed up. Ive tried it the other way around, that is, passing a value from the main report to the sub-report and that works fine.
    Below is an example of what I am trying to do but it is not working. In my sub-report Ive declared a formula variable as,
    formula name=main_subIntRatePageCount
    Shared NumberVar subIntRatePageCount := TotalPageCount;
    and in the Main report Ive declared the formula variable as,
    formula name=subIntRatePageCount
    Shared NumberVar subIntRatePageCount;
    subIntRatePageCount;
    I want the value assigned to "subIntRatePageCount" in my Sub-Report to be available to my Main report.
    The problem I am trying to solve is that the sub-report is spilling over onto two pages, and I need a way of updating the page display on the main report to reflect this. The page display is of format, "displaying page 1 of  3", but its not taking into account the extra page produced by the sub-report, so it should say "displaying page 1 of 4".

    Also thanks Raghavendra, Asha,
    I've tried adding the "whileprintingrecords" statement but that doesnt seem to make any difference.
    I notice that the subReport is being called from my the GroupFooter section of the main report, and I am trying to reference the variable in the main repot in the Page Footer section. Could it be that the variable hasnt been calculated in the Page Footer by the time I calculate it in sub-Report? I thought Crystal Reports does at least 5 passes over the report evaluating all the formulas before it prints the report?
    The problem Im trying to solve is I need to know how many pages my report will have before its completed, so that i can print the statement "displaying page 1 of X", and X is currently not being calculated correctly because the sub-report is printing onto 2 pages and not 1 so the report thinks I have 1 of X pages and not X+1.
    Regards
    Robert.

  • SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

    Hi All,
    I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
    in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
    Any clue why it is happening.
    Thanks Shiven:) If Answer is Helpful, Please Vote

    Hi All,
    Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing. 
    Once I cleared the space, report started working and above error was not displaying. 
    Thanks Shiven:) If Answer is Helpful, Please Vote

  • How to catch error codes returned from java

    Hi all,
    Is there anyway to capture the exit code that is returned by System.exit() from java. I know a batch file's ERRORLEVEL can do this. However, I want to use c/cpp (JNI) to get this functionality. Please help ..
    Thanks in advance,
    Soujanya.R

    how could you expect me to use JAVA command without compiling it with Javac??
    I complied the java code using javac and then called(executed ) it using the Java..
    I am using JNI_Create/JavaVM() to create a JVM from CPP file. that works fine. Now, my issue is that I want to capture a couple of exit codes that are returned from the System.exit() of the java code.
    now, guys.. is there any way to capture that exit codes returning by Ssytem.exit() in or using JNI ??
    if yes, please help me with the code snippets.
    Thanks,
    Soujanya.R

  • How to use value returned from a bean in jsp page

    Hi All,
    I have a string array value being returned from a javabean to a jsp page. I want to be able to assign the value to a variable in the jsp page.
    How do I do this?
    Many thanks :)

    thanks for your response.
    I actually used something like this:
    <% String loggedin = log.User(user,password);
    out.println(loggedin);
    %>i am not yet as much of an expert on beans as i would like to be, but i thought it is not really a bean if it has a getter method which takes arguments?

  • An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

    When I run the report on production I got the following error message:
    Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
    request on the server. The status code returned from the server was: 12019
    It hasn’t happen on Dev and Test before.                           
    I googled, The error is described as:
    12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
    The requested operation cannot be carried out because the
    handle supplied is not in the correct state.
    But I cannot find the solution for that. 
    Has it happend to you before? How to solve that?      

    Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
    Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
    code returned from the server was: 12019

  • A SOA Exception returned from Oracle EBS ISG

    Hi All,
    Need your help. Maybe someone know the solution for this error.
    Background
    Using a webservice client to call WSDL service which is published in Oracle EBS Integrated SOA Gateway. After invoking, encounter a error.
    Error
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><faultcode xmlns="">SOAP-ENV:Server</faultcode><faultstring xmlns="">FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null
        :Please see service monitor logs for full error trace</faultstring></env:Fault></env:Body></env:Envelope>
    My Research
    I checked SOA log, found detailed log like below.
    Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : JCAClientFactoryCrated.
    Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : JCAInterfaceCreated.
    Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : JCAOperationCreated.
    Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : buildversion in jcahanlder is 1213
    Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : found runtime classes
    Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : created instance for runtime classes
    Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : runtime Methods found [Ljava.lang.reflect.Method;@2ba02ba0
    Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : method executeRequestResponseOperation found
    Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : executing 3 parameter method
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : Exception returned from JCA Service Runtime.java.lang.reflect.InvocationTargetException
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : Exception returned from JCA Service Runtime.oracle.apps.fnd.soa.util.SOAException: ServiceProcessingError: Exception returned from JCA Service Runtime. null
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.handleRequest : Exception returned from JCA Service Runtime.oracle.apps.fnd.soa.util.SOAException: ServiceProcessingError: Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.createErrorResponseMessage : Creating Error Response Message.
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.getNLSTranslatedMessage : Error code : FND_SOA_SERVICE_EXECUTION_ERR
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.util.SOAContext.setSecurityContext : Is security context set = true
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.util.SOAContext.setNLSContext : Is nls context set = true
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.getNLSTranslatedMessage : NLS Compliant Error Msg = FND_SOA_SERVICE_EXECUTION_ERR
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.createErrorResponseMessage : Setting fault string = FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null
        :Please see service monitor logs for full error trace
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.createErrorResponseMessage : Error Response Message Created
    Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.processMessage : oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null
        at oracle.apps.fnd.soa.provider.services.jca.JCAHandler.handleRequest(JCAHandler.java:135)
        at oracle.apps.fnd.soa.provider.SOAProvider.processMessage(SOAProvider.java:366)
        at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:958)
        at oracle.j2ee.ws.server.WebServiceProcessor$1.run(WebServiceProcessor.java:388)
        at java.security.AccessController.doPrivileged(AccessController.java:284)
        at javax.security.auth.Subject.doAs(Subject.java:573)
        at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:385)
        at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:481)
        at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
        at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
        at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:200)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
        at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
        at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
        at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
        at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
        at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
        at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
        at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
        at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
        at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
        at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
        at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
        at java.lang.Thread.run(Thread.java:735)
    java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:45)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
        at java.lang.reflect.Method.invoke(Method.java:599)
        at oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke(JCAHandler.java:193)
        at oracle.apps.fnd.soa.provider.services.jca.JCAHandler.handleRequest(JCAHandler.java:123)
        at oracle.apps.fnd.soa.provider.SOAProvider.processMessage(SOAProvider.java:366)
        at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:958)
        at oracle.j2ee.ws.server.WebServiceProcessor$1.run(WebServiceProcessor.java:388)
        at java.security.AccessController.doPrivileged(AccessController.java:284)
        at javax.security.auth.Subject.doAs(Subject.java:573)
        at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:385)
        at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:481)
        at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
        at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
        at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:200)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
        at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
        at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
        at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
        at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
        at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
        at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
        at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
        at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
        at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
        at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
        at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
        at java.lang.Thread.run(Thread.java:735)
    Caused by: org.collaxa.thirdparty.apache.wsif.WSIFException: file:/xxxx/soa/PLSQL/4392/INVOKEFMSWS.wsdl [ INVOKEFMSWS_ptt::INVOKEFMSWS(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'INVOKEFMSWS' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    ; nested exception is:
        ORABPEL-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception.
    Missing Property: [DBManagedConnectionFactory.userName].
    Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
        at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:642)
        at oracle.tip.adapter.client.JCABindingOperation.invokeWsifProvider(JCABindingOperation.java:275)
        at oracle.tip.adapter.client.JCABindingOperation.executeRequestResponseOperation(JCABindingOperation.java:182)
        ... 30 more
    Caused by: ORABPEL-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception.
    Missing Property: [DBManagedConnectionFactory.userName].
    Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
    And in MOS, I found below related metalink note, But I think my case is not same with the description in that note, bcz the reponsibility I provided is not null, and should be a correct value.
    FND_SOA_SERVICE_EXECUTION_ERR Error When Invoking EBS SOA Gateway Web Service (Doc ID 1512956.1)
    Thanks in advance
    Paul

    Hi, PaulTian ,
      Have you find the solution? I have the same problem, and it world not be responsibility reasons. The webservice worked well ,but it stopped when applied a patch.
    Kevin

Maybe you are looking for

  • What is the music playing in the background at WWDC video "Thank you"?

    What is the music playing in the background at WWDC video "Thank you"?, which starts with the blind man that used his iPhone to walk independently. (at the end of the video, you can hear the music without speech).

  • How to create collision system which allows player to push object

    Hi guys, For the game I'm making, I wanna set up a game mechanic/feature where  the player can push blocks around the level but currently having  problems setting the collision system to do this. I've been trying to  use method call (shown below) whi

  • Flash 8 Button Bug

    I've run into what appears to be a bug in Flash 8. I'm using Flash 8 Professional. I have an FLA containing buttons. Each button contains two layers. The first layer is text. The second layer is a line that acts as an "underline" for the text. When I

  • How to organize assets in Adobe Audition

    I've been exporting my Premiere Pro sessions to Audition for mixing and have liked the flexibility of what Audition can do.  But I've also been completely baffled by how one organizes assets in an efficient way (such as using folders or bins like in

  • How to define complex reconciliation rule

    i have to do reconciliation with some complex rule but if i see reconciliation rule we can only define simple rule like userid = samAccountName. Please suggest how we can define complex rule. thanks in adv.