Return from customer movement type

Hello,
We use in our system 653 mov.type when we return goods from customer.
Usually we create the return order with reference to the original customer order and the original customer order is MTO (make to order) . When posting the 653 mov.type the system take the cost of the material (VPRS) from moving average price of unrestricted stock.
My question is : in cases that my return customer order is with reference to original customer order, is it possible to configure a movement type (or other way) that the system will take the cost from the original customer order and not from the cost in unrestricted stock and in advance it will affect the moving average price ??
I will try to explain by an example:
I have in stock 10 pieces each for 5 $,
My return order has 4 pieces that has cost of 8 $ in the original customer order.
The system behavior today after returning the stock with 653 mov type:
I have 14 pieces with cost of 5 $ - no change in moving average price and VPRS cost for profitability analysis  is 5 $
The desirable behavior according to my expectations:
I will have 14 pieces with cost of (50+32)/14=5.8 u2013 the moving average will change according to cost in original customer order 8 $ and VPRS cost for profitability analysis is 8$.
I hope I made my self clear enough
Regards
Idit

Hello Kishore,
Thanks for your answer.
I can understand the idea that MAP changes only in case of Purchase of material not at time of sales returns.
But I want to give you a case that causes problems in our view:
Most of my sale cases are MTO, that means that I buy for order and therefore my MAP will not be affect.
Example: my MAP 3 $ I buy to order for 5 $ and when I will do GR it will not affect the MAP (101E)
When I will return the goods (653) I want that the cost from vendor (5$) will affect the MAP because this was the real cost from my vendor but when I return the stock I return it to unrestricted stock.
I have cases that I transfer sales order stock to unrestricted stock and the MAP is change according to cost of sales order (411E/412E) u2013 it's the same in my logic - the MAP change according to the real cost from vendor.
I will be happy to have your response.
Kind Regards
Idit

Similar Messages

  • Trace the reference Standard movement type from customized movement type

    Hi,
    In my system there are few customized movement type.
    Can I know which Standard movement type was used as reference to create the customized movement type.

    try table t156 table .. put your mvt type and see the BUSTR field for the reference mvt

  • Material Return from 542 movement type without purchase order

    HI Expert
    I have a problem regaring material return from vendor through 542 mov type against purchase order.
    when i transfer material to vendor with mov type 541. and after grv if we return material from vendor against purchase order.
    system doesnot allow to return material against purchase order. it allows mov type 542 for returning material from venodr without pruchase order.
    Suppose we have 10 quality for a component to transfer vendor we take grv and issue 5 qty through 543 move type automatically. if we want to take return 5 remaining qty from vendor against purchase order .
    system doesnot allow to return component from vendor against purchase order.
    but allow  to return component from vendor without purchase order.
    vendor stocks becomes less but purchase order still open for open quantity.
    how we could control vendor's returing material with the reference of purchase order after grv.
    with regards
    sanjay agrawal

    HI,
    Are you creating return Po for subcontracting vendor with item category L.?
    we used movement type 541 to send material to vendor ,now you want movement type 542 in system means take back from vendor?
    I don't think so it will make work and make any sense
    why you are not adjust your component with subcontracting adjustment in sap mm
    check following link
    [http://help.sap.com/saphelp_470/helpdata/en/4d/2b908943ad11d189410000e829fbbd/content.htm]
    Regards
    Kailas Ugale

  • Movement type 453 (Transfer posting to own stock from returns from customer

    Hi all,
    I have problem in goods movement type 453 (Transfer posting to own stock from returns from customer)
    it picking from from profit center from in material master under  sales:general/plant tab   but we need picking from based on account assignment group  in the material maser sales org.2.
    Other movement types are picking from based on account assignment group only . for that what i can do please help me on this.
    K.Satish

    Hi,
    In Co controlling are the automatic account assignment is only the default and it on the Priority.
    if you think what is picked up from the mm is wrong.
    the best way out will be to go with the substitution  rule.
    based on the movement type use the rule.
    hope this is clear , assign points.
    With regards
    Krishna

  • Custom Movement Type - Hybrid of 671 and 657

    Summary:
    Due to a business process we are looking for a movement type similar
    to a 671, but instead of inventory going to unrestricted stock, it goes
    to blocked stock instead.
    Detail:
    We have a business process where one plant (store) will create a return
    STO (RETPO=X) to another plant (warehouse).  This STO utilizes delivery
    processing.  Following the creation of the STO, a negative goods receipt
    is perform at the original receiving plant (store) using movement type
    161.  This stock leaves the store as unrestricted stock type.  When it
    arrives at the warehouse, a negative goods issue is performed using a
    671 movement types.  This brings the stock back into the original
    shipping location as unrestricted stock.
    Since the product being returned is defective we would like this product
    to be brought back into the warehouse (original shipping location) as
    blocked stock.
    We have tried using movement type 657 instead of 671, and while it posts
    to the desired stock type, the movement does not update the STO with the
    negative goods issue, nor does it remove it from stock in-transit.
    Question:
    This there either, a standard movement type or settings to create a
    custom movement type, which will be a hybrid of 671 and 657?  We want
    this movement type to remove the stock in-transit and update the STO (as
    671), and go into blocked stock (as 657).

    there is no such Hybrid movement type.
    you cannot really create own movement types, you can only create new movement types by copy of an existing one.
    If such combination is not forseen (and no coding in SAP programs) then it is not possible to create such a movement type yourself.
    Stock in transit has no stock categories to differentiate between unrestricted, quality or blocked stock, you can only post unrestricted stock into transit. Hence you can only get unrestricted stock from in-transit.
    QM would have been an option as you can define inspection types and they trigger that a stock will go into quality inspection instead directly to unrestricted.
    But you already said that you do not use QM - so there is not much what you can do except remembering that you do a transfer posting to bring returns into blocked stock .

  • Stock relevant inspection lot with return from customer

    Dear Gurus,
    What settings should I make so that when I make a sales order return from customer, I get a stock relevant inspection lot. What is available for me now is these 2 options:
    1. To activate insp. type 06, and upon return, the stock will fall in the returns logic in the storage location, and an inspection lot will be created, but it is not stock relevant.
    2. To activate insp. type 05, the stock will fall in the returns logic in the storage location, after that transfer from return to quality using mvt type 457, upon this transfer a stock relevant inp. lot is created.
    Both solutions are not suitable for me because for the first option I do not have a stock relevant inp. lot, and for the second option, I loose the refernce to which customer this lot is relevant, and this information is very important for the process.
    Regards,
    MaX

    Hi MaX,
    Well I would suggest to with 1st method as this is standard practice.
    No doubt you can have option to inward the material for customer returns directly in to quality inspection also. Follow the following steps.
    1.     Assign inspection type 05 in material master
    2.     Deactivate inspection type 06
    3.     Go To transaction VOV6
    4.     Double click on appropriate schedule line category that you are using for your return process
    5.     Change movement type there to 655. i.e. returns to quality inspection stock
    6.     Run a cycle. As a result of this stock will be posted to QI with stock relevant  inspection lot
    7.     You can record results and post stock with UD as in normal case of GR.
    8.     Do not forget to check the effect of accounting and controlling document for this movement with your FI consultant.
    Regards,
    Anand Rao

  • Post to Returns stock with movement type 632

    Hi all,
    I have configured SD Customer Consignment for my client. When consignment goods come back from the customer Movement Type 632 is used en the goods are posted in unrestricted use. My client want these goods to be posted in the Returns stock. Does anyone know if this is possible?
    Movement type 651 posts to the Returns stock. Where is teh actual setting made that this movement type posts to Return stock. Can anyone explain to me how this works.
    Thanks in advance.
    regards,
    Roel

    Have tested your scenario- Just now.
    Though you can change the mov type in sch.line cat, but it acts like as normal return scenario, so you will be loosing the track of Inventory available @ Customer as part of Consignment.
    Still, if you change the mov type, you will not be able to perform PGR for Consignment Returns in VL01N,its becasue that, special stock indicator-W in item cat:VOV7.
    FYI,
                         Sales doc type - Item cat -- SCh.line Cat- Mov type
    Consig Fillup - KB -
    KBN -
    E1/E0 - 631
    Consig.Issue -KE--KEN--
    C1/C0- 633
    Consig.Ret.-KRKRND0----634
    Consig.Pickup-KA--KAN--
    F1/F0- 632

  • Issue with Return Delivery for movement type 262

    Hi,
    I have got a strange issue, the user is trying to do a MIGO Return Delivery for a material document using movement type 262, this he claims has been doing it for many materials. However when i go to the MKPF table i see the transaction Code field to be MIGO_GI for all the material documents for which he claims to have done return delivery. But under this transaction code we have only 4 options - Display, Issue, Cancel and Remove from storage.
    Now when he tries to do the return delivery for movement type 262 he get an error message "Check table T156N: entry RL 262  does not exist" , but this has been very well maintained in the table.
    Can you please let me know -
    If it is possible to do a return delivery for a movement type 262?
    If yes how to address the above error encountered.
    Thanks in advance
    Sachin

    Hi Sachin,
    If you think of return delivery to vendor with or w/o PO reference you can use movement types 161, 122, 124 as default settings.
    Movement type 261 means withdrawal against production order and its reverse is MVT 262. The latter can be used e.g. via MB1A (or you can make storno of a confirmation by 261).
    Are you sure your user is using the correct terminology ('return delivery')? Please check the material documents he/she claims to have booked as return delivery. (in MB51 you can get a list of all material movements of MVT 261 that belong to 'your user' and after that you can open the material document and check through which transaction the booking was made.)
    BR
    Csaba

  • Creation of new customized movement type

    Hi Expert,
    I trying to create a new customized movement type. I am  trying to do by the following steps.
    I want to copy the movement type 501 as Z01
    T.Code : OMJJ
    and the system is asking for field selection,
    i just click movment type and enter
    system is asking movement type from and TO.
    i select 501 and 502 and enter
    and i am trying to do copy as from 501 to z01, and press enter
    System is giving error as " Specify the key within the work area"
    What should i do?
    Rgds,
    Sathya

    Hi Experts,
    I have created the customized movement type as Z41 by copying the movement type from 541. NOwi want to change the description of Z41. It meanse. if we are issuing the material to the vendor for sub-contracting, in MMBE ( Stock OVerview ) system is saying that,"*stock provide to vendor"*
    Likewise can i maintain descripton for  customized movement type as Z41 as " Stock provided to customer " in stock overview.
    Please help for the above.
    Regards,
    Sathya N

  • Special stock indicator O to add existing custom movement types

    Hi Gurus,
    Business having the two custom movement types for which they want to add special stock indicator O.
    please let me know is it possible to add special stock indicator O to existing movement types.
    or
    Is it possible to achieve this with creation of new movement types along with current special stock indicators.
    Thanks in advance. 

    have you ever created a new movement type?
    try it.
    it can only be done by copy of a SAP given movement type, hence it has basically the same functionality as the original movement.
    the main purpose for new movement types are to post to other accounts and to segregate authorization.
    In other words you cannot add O to an existing movement, you need to create a new movement by copy from a movement that allows this O

  • Can I know what is the process for us to do Good Return from customer?

    Can I know what is the process for us to do Good Return from customer?

    hi
    this ques need to be posted in sd forum..
    to answer this u can use order type RE to create Return order and then u can do the goods receipt..
    or u can use the process mentioned in first reply.
    regards
    CMM

  • QC upon Return from customer

    Hello everyone,
    I had an issue regarding performing quality check upon returing delivery. Let me explain the situation.
    My sales happen from  Plant 2 (it is not the manufacturing plant or the plant wher QC happens) Manufacturing and QC happens in Plant 1. Upon return from customer, The return material arrives at Plant2. No QC takes place here. The returned material is transported back to Plant 1 where QC takes place and finally UD takes place
    Am finding it hard to map this scenario. Coz, if i have the corresponding inspection type(06:Inspection for returns from customer) in plant 2 then inspection lot is generated in plant2. Whereas no inspection takes place here but in plant1.
    So please suggest a solution to this.
    Any help would be appreciated.
    Sincerely,
    Aji

    Hello There,
    Thank you for your replies but still the issue cant be resolved as such. I cannot have Delivery at Plant1 because actually delivery is happening at plant 2(Distribution Plant) and accordingly return delivery is also occuring here. So this solution is not feasible.
    Sujith I agree, you can create a manual inspection lot upon return. But since QC is not performed where Return delivery is actually taking place, there is no point raising an inspection lot at that plant. Moreover upon return, the quantity goes to "Return" Stock. This has then to be trasferred to the manufacturing plant/QC plant. So what i do is,  to transfer the material to return stock of the QC plant. Here, how can i raise a inspection lot for qty which has been stock transferred ( to "Return stocK") in the QC plant?
    Any suggestion is greatly appreciated.
    Sincerely,
    Aji

  • Customizing movement type issue

    i want to create a movement type and i want to assign some account assignments to it....how do i go about it

    First pick the standard SAP movement type which is closest to your new movement type requirement. Then create the new movement type by copying from the selected movement type. In case of customized movement type, copying the best option, manually creating is impossible as there are too many variables to account for..
    The after create the new movement type the necessary accounting changes can be configured easily.

  • Third party returns from customer to vendor (Urgent)

    Hi,
    We have an urgent requirement regarding an issue with third party returns from customer.
    The scenario required is as follows :
    When the customer returns the goods in Third party proccess the goods should be directly returned to the vendor instead of receiving into our plant .
    How can we map this bussiness proccess?
    Currently the returns are handled as per the standard SAP proccess ie.,
    Customer returns the goods> Return order is created>Return delivery created (PGR)>Credit memo created.
    In this case we are receiving goods into our plant .

    Hi Shrikant
    1. If delivery of goods is the only issue then you can ask customer to make invoice with Invoice to your company address and Delivery address as the vendor address. Practically it is possible.
    2. Then you can make corresponding entries in SAP and regularise it.
    Thnx
    Nilesh

  • J_1IEXCDTL Update from 561 movement type

    Hello,
    In J_1IEXCDTL some entries are not avaialable, because whiles uploading of data from 4.6C to ECC6.0 some entries are missing.
    So i,e the reason while creating of outgoing excise invoice through J1IS iam not getting the vlaues in "GET EXCISE INVOICE" for perticular material.
    1)what can i do for this?
    2)If shall make the entries from 561 and shal i update J_1IEXCDTL and J_1IEXCHDR tables from this material document through J1I5
    Kindly do the needful.
    Regards
    sapman man

    Hello,
    We are uploading the J_1IEXCDTL and J_1IEXCHDR values in ECC 6.0.
    So when the some vendor procured materials are there, That excise values are saved in these two tables.
    So when we send the materials to some other plant, then we are creating the J1IS. then in Get excise invoice we are not getting the that old values.
    bcz when we are taking initial stock from 561 movement type. the stock of that material saved in stor loc. but we send this material to different plant, then while creating the J1IS , in get excise invoice tab we are not getting the old values.
    How to do?  how to find old excise values in GET EXCISE INVOICE tab in J1IS
    sapman man

Maybe you are looking for