Return from IBRD is ERR, TIMO, and END

The usual return from IBRD is END or if nothing is there to read the return is ERR and TIMO.
I don't understand the combination. It makes sense that you read the data or you don't. When I get this combination and check the data, all the expected data was read. Can any body explain this one???
Thanks

Hi,
You're right, usually ibrd returns one or the other. Under what conditions is this happening?. What are the previous function calls that you're using?.
Diego F
National Instruments

Similar Messages

  • I Have just returned from a 2 week vacation and had left my iMac plugged in, I noticed we suffered a power cut during our absence from home and now the iMac won't power up, help !

    I Have just returned from a 2 week vacation and had left my iMac plugged in, I noticed we suffered a power cut during our absence from home and now the iMac won't power up, help !

    What have you tried?
    A safe boot?
    A recovery boot?
    Allan

  • Issues after returning from Leopard to Tiger, icons and iworld apps!

    Hi
    After headaches with Leopard i decided enough is enough and returned to Tiger to finish producing a music project.
    I did erased teh drive 7 times pass, re installed Tiger and now it does hting i never seen before.
    After several hours te icons get all fuzzy, some times i see the last application in the side bar as the icons for music, photos etc, even the drives look like iTunes or whatever app i last used.
    Side bar also does not show hard drives at times yet they are on the desk top.
    at some point its all nothing but the desktop, applications folders etc, not hard drives at all.
    please advise anyone.

    From your cell it is very expensive when you wait 25 minutes, i think all 902 are charge by the minute.,
    The irony of Spain is that stores now use a 902 number to charge if you ask whats in sock as well! while the average person makes 1000€ and the costs of eveyrthing electronic is not converted from Dollars!
    a $1500 mac a is 1500€ which really is 2000€, no tax breaks from shipping to another state, there are no other states but countries!

  • HT4623 I updated my ipad from IOS 7 following prompting and ended up with connect to itunes icon. When trying to restore, the process keeps aborting after 30 mins with an unknown error message. Any ideas to overcome this problem?

    Earlier today I was asked to update mu IOS which I did through my wifi (power connected). On return I just had the "connect to Itunes" icon. I've tried to restore the settings as suggested on the summary page but after downloading and verifying the connections and device the restoration locks up after about 30-40minutes due to an unknown error.
    Is there anything I can do to overcome this?

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • Returned from a 2 week vacation and emails were printing at 40%, changed scale to 100% now header and 1st part of email are not printing.

    This seems to be happening on emails I send or ones I get from my friends, all "commercial" emails seem to be OK. I tried changing the margins but that did not work. All other print functions, from Word or Excel are working fine, it's only Thunderbird email. If it is a short one or two line email, the printer spits out a blank page.
    Vinnie

    So long as your movies are in a compatble format and in the video app they will play just fine.
    Other apps will work, some might require mirroring, which is why it's best to use the in supplied video app.
    Video formats
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Audio formats supported
    HE-AAC (V1), AAC (16 to 320 Kbps), protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV; Dolby Digital 5.1 surround sound pass-through

  • I just returned from vacation in the states and I can't connect to the internet

    i can't connect to the internet on my mac air.  I know that the internet connection is good because other devices and computers are using it.  I'm not sure if it is because I used my computer in the states while I was on computer.  Can you help me get back on?

    Run the Network Diagnostics assistant. How far do you get?

  • HT1455 10.8.4 returned from vacation and my finder stops resoponding frequently

    Why does my finder stop responding?
    How do I fix it?

    Yes still have the problem
    This was from the last episode, tried to get all identifying info out.
    2013-08-24 9:00:27.608 PM coreservicesd[68]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=153
    2013-08-24 9:00:27.609 PM NotificationCenter[188]: Connection interrupted.
    2013-08-24 9:00:31.795 PM GoogleSoftwareUpdateDaemon[962]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
    2013-08-24 9:00:32.413 PM WDButtonManager[977]: self-sent 'ascr'/'gdut' event accepted in process that isn't scriptable
    2013-08-24 9:03:15.000 PM bootlog[0]: BOOT_TIME 1377392595 0
    2013-08-24 9:03:27.000 PM kernel[0]: Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    2013-08-24 9:03:27.000 PM kernel[0]: vm_page_bootstrap: 929913 free pages and 110471 wired pages
    2013-08-24 9:03:27.000 PM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
    2013-08-24 9:03:27.000 PM kernel[0]: zone leak detection enabled
    2013-08-24 9:03:27.000 PM kernel[0]: standard timeslicing quantum is 10000 us
    2013-08-24 9:03:27.000 PM kernel[0]: standard background quantum is 2500 us
    2013-08-24 9:03:27.000 PM kernel[0]: mig_table_max_displ = 74
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto kext started!
    2013-08-24 9:03:27.000 PM kernel[0]: Running kernel space in FIPS MODE
    2013-08-24 9:03:27.000 PM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    2013-08-24 9:03:27.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    2013-08-24 9:03:27.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
    2013-08-24 9:03:27.000 PM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    2013-08-24 9:03:27.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    2013-08-24 9:03:27.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
    2013-08-24 9:03:27.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    2013-08-24 9:03:27.000 PM kernel[0]: calling mpo_policy_init for Sandbox
    2013-08-24 9:03:27.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    2013-08-24 9:03:27.000 PM kernel[0]: calling mpo_policy_init for Quarantine
    2013-08-24 9:03:27.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    2013-08-24 9:03:27.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    2013-08-24 9:03:27.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
    2013-08-24 9:03:27.000 PM kernel[0]: MAC Framework successfully initialized
    2013-08-24 9:03:27.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    2013-08-24 9:03:27.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    2013-08-24 9:03:27.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    2013-08-24 9:03:27.000 PM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    2013-08-24 9:03:27.000 PM kernel[0]: [ PCI configuration begin ]
    2013-08-24 9:03:27.000 PM kernel[0]: console relocated to 0xf80010000
    2013-08-24 9:03:27.000 PM kernel[0]: PCI configuration changed (bridge=3 device=1 cardbus=0)
    2013-08-24 9:03:27.000 PM kernel[0]: [ PCI configuration end, bridges 7 devices 17 ]
    2013-08-24 9:03:27.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May  1 2013) initialization complete
    2013-08-24 9:03:27.000 PM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    2013-08-24 9:03:27.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    2013-08-24 9:03:27.000 PM kernel[0]: rooting via boot-uuid from /chosen: C3CA7225-697D-3596-BC04-4BDC25066031
    2013-08-24 9:03:27.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    2013-08-24 9:03:27.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    2013-08-24 9:03:27.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    2013-08-24 9:03:27.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    2013-08-24 9:03:27.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    2013-08-24 9:03:27.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    2013-08-24 9:03:27.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002332fffe0d57fa; max speed s800.
    2013-08-24 9:03:27.000 PM kernel[0]: BTCOEXIST off
    2013-08-24 9:03:27.000 PM kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
    2013-08-24 9:03:27.000 PM kernel[0]: 5.10.131.36
    2013-08-24 9:03:27.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/Hitachi HDS721075KLA360 Media/IOGUIDPartitionScheme/Customer@2
    2013-08-24 9:03:27.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 2
    2013-08-24 9:03:27.000 PM kernel[0]: jnl: unknown-dev: replay_journal: from: 3028992 to: 6748160 (joffset 0x1087d000)
    2013-08-24 9:03:27.000 PM kernel[0]: jnl: unknown-dev: journal replay done.
    2013-08-24 9:03:27.000 PM kernel[0]: Kernel is LP64
    2013-08-24 9:03:27.000 PM kernel[0]: hfs: Removed 10 orphaned / unlinked files and 35 directories
    2013-08-24 9:03:27.000 PM kernel[0]: AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
    2013-08-24 9:03:27.000 PM kernel[0]: AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
    2013-08-24 9:03:19.819 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
    2013-08-24 9:03:19.819 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    2013-08-24 9:03:27.552 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    2013-08-24 9:03:37.417 PM hidd[49]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    2013-08-24 9:03:37.424 PM hidd[49]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    2013-08-24 9:03:37.424 PM fseventsd[50]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (113044 22 113165)
    2013-08-24 9:03:37.425 PM fseventsd[50]: log dir: /.fseventsd getting new uuid: 49A167B3-92BF-4366-8F91-59E105316021
    2013-08-24 9:03:37.000 PM kernel[0]: macx_swapon SUCCESS
    2013-08-24 9:03:38.000 PM kernel[0]: yukon: Ethernet address 00:23:32:96:13:27
    2013-08-24 9:03:38.000 PM kernel[0]: AirPort_Brcm43224: Ethernet address 00:23:12:1b:d2:b3
    2013-08-24 9:03:38.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    2013-08-24 9:03:40.000 PM kernel[0]: Waiting for DSMOS...
    2013-08-24 9:03:40.444 PM kdc[47]: label: default
    2013-08-24 9:03:40.444 PM kdc[47]:           dbname: od:/Local/Default
    2013-08-24 9:03:40.444 PM kdc[47]:           mkey_file: /var/db/krb5kdc/m-key
    2013-08-24 9:03:40.444 PM kdc[47]:           acl_file: /var/db/krb5kdc/kadmind.acl
    2013-08-24 9:03:41.352 PM mDNSResponder[41]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
    2013-08-24 9:03:43.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
    2013-08-24 9:03:43.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    2013-08-24 9:03:43.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x820F FirmwareVersion - 0x0201
    2013-08-24 9:03:43.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    2013-08-24 9:03:43.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    2013-08-24 9:03:43.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    2013-08-24 9:03:43.000 PM kernel[0]: ** Device in slot: SLOT--1 **
    2013-08-24 9:03:43.000 PM kernel[0]: Previous Shutdown Cause: 3
    2013-08-24 9:03:43.000 PM kernel[0]: DSMOS has arrived
    2013-08-24 9:03:43.875 PM coreservicesd[68]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    2013-08-24 9:03:43.906 PM blued[58]: Read the UHE Info
    2013-08-24 9:03:43.907 PM blued[58]: Read version 2 info.  Number of devices:1
    2013-08-24 9:03:43.907 PM blued[58]: Class of device:     0x2580
    2013-08-24 9:03:43.907 PM blued[58]: Device name: ' ' length:23
    2013-08-24 9:03:43.907 PM blued[58]: Finished reading the HID data
    2013-08-24 9:03:43.908 PM blued[58]: Found a device with PID:0x030d VID:0x05ac
    2013-08-24 9:03:44.101 PM airportd[78]: _processDLILEvent: en1 attached (down)
    2013-08-24 9:03:44.000 PM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    2013-08-24 9:03:44.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    2013-08-24 9:03:44.196 PM configd[17]: network changed.
    2013-08-24 9:03:44.198 PM configd[17]: setting hostname to "  -iMac-2.local"
    2013-08-24 9:03:45.323 PM mds[40]: (Normal) FMW: FMW 0 0
    2013-08-24 9:03:46.931 PM com.apple.SecurityServer[16]: Session 100000 created
    2013-08-24 9:03:53.000 PM kernel[0]: fsevents: watcher SmartwareServerA (pid: 62) - Using /dev/fsevents directly is unsupported.  Migrate to FSEventsFramework
    2013-08-24 9:03:53.000 PM kernel[0]: [BNBMouseDevice::init][75.19] init is complete
    2013-08-24 9:03:53.000 PM kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
    2013-08-24 9:03:53.000 PM kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    2013-08-24 9:03:54.056 PM com.apple.SecurityServer[16]: Entering service
    2013-08-24 9:03:54.156 PM appleeventsd[55]: main: Starting up
    2013-08-24 9:03:54.261 PM mDNSResponder[41]: D2D_IPC: Loaded
    2013-08-24 9:03:54.261 PM mDNSResponder[41]: D2DInitialize succeeded
    2013-08-24 9:03:54.266 PM mDNSResponder[41]: Adding registration domain 1010781033.members.btmm.icloud.com.
    2013-08-24 9:03:54.000 PM kernel[0]: [AppleMultitouchDevice::start] entered
    2013-08-24 9:03:54.284 PM configd[17]: network changed: DNS*
    2013-08-24 9:03:54.287 PM configd[17]: network changed: DNS*
    2013-08-24 9:03:54.307 PM kdc[47]: PKINIT: failed to find a signing certifiate with a public key
    2013-08-24 9:03:54.540 PM com.apple.usbmuxd[29]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    2013-08-24 9:03:54.573 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    2013-08-24 9:03:54.680 PM kdc[47]: KDC started
    2013-08-24 9:03:54.790 PM loginwindow[44]: Login Window Application Started
    2013-08-24 9:03:54.977 PM locationd[45]: NOTICE,Location icon should now be in state 0
    2013-08-24 9:03:55.050 PM WindowServer[96]: Server is starting up
    2013-08-24 9:03:55.067 PM WindowServer[96]: Session 256 retained (2 references)
    2013-08-24 9:03:55.067 PM WindowServer[96]: Session 256 released (1 references)
    2013-08-24 9:03:55.070 PM systemkeychain[70]: done file: /var/run/systemkeychaincheck.done
    2013-08-24 9:03:55.153 PM awacsd[59]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
    2013-08-24 9:03:55.199 PM digest-service[101]: label: default
    2013-08-24 9:03:55.200 PM digest-service[101]:           dbname: od:/Local/Default
    2013-08-24 9:03:55.200 PM digest-service[101]:           mkey_file: /var/db/krb5kdc/m-key
    2013-08-24 9:03:55.200 PM digest-service[101]:           acl_file: /var/db/krb5kdc/kadmind.acl
    2013-08-24 9:03:55.203 PM digest-service[101]: digest-request: uid=0
    2013-08-24 9:03:55.271 PM rpcsvchost[107]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    2013-08-24 9:03:55.286 PM digest-service[101]: digest-request: init request
    2013-08-24 9:03:55.293 PM digest-service[101]: digest-request: init return domain: BUILTIN server:
    2013-08-24 9:03:55.341 PM WindowServer[96]: Session 256 retained (2 references)
    2013-08-24 9:03:55.353 PM WindowServer[96]: init_page_flip: page flip mode is on
    2013-08-24 9:03:55.393 PM awacsd[59]: ConduitMultiClientPlus: Could not get encoded salted hashed password
    2013-08-24 9:03:55.435 PM awacsd[59]: Configuring lazy AWACS client: 1010781033.p02.members.btmm.icloud.com.
    2013-08-24 9:03:55.444 PM netbiosd[79]: Unable to start NetBIOS name service:
    2013-08-24 9:03:55.575 PM apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    2013-08-24 9:03:55.576 PM apsd[61]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    2013-08-24 9:03:56.000 PM kernel[0]: en1: 802.11d country code set to 'CA'.
    2013-08-24 9:03:56.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 132 136 140 149 153 157 161 165
    2013-08-24 9:03:57.368 PM WindowServer[96]: mux_initialize: Couldn't find any matches
    2013-08-24 9:03:57.385 PM WindowServer[96]: GLCompositor enabled for tile size [256 x 256]
    2013-08-24 9:03:57.385 PM WindowServer[96]: CGXGLInitMipMap: mip map mode is on
    2013-08-24 9:03:57.424 PM WindowServer[96]: WSMachineUsesNewStyleMirroring: false
    2013-08-24 9:03:57.425 PM WindowServer[96]: Display 0x04271ac0: GL mask 0x1; bounds (0, 0)[1680 x 1050], 36 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c6b, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009c6b0000000004271ac0
    2013-08-24 9:03:57.425 PM WindowServer[96]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    2013-08-24 9:03:57.433 PM WindowServer[96]: Created shield window 0x5 for display 0x04271ac0
    2013-08-24 9:03:57.433 PM WindowServer[96]: Created shield window 0x6 for display 0x003f003d
    2013-08-24 9:03:57.436 PM WindowServer[96]: Display 0x04271ac0: GL mask 0x1; bounds (0, 0)[1680 x 1050], 36 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c6b, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009c6b0000000004271ac0
    2013-08-24 9:03:57.436 PM WindowServer[96]: Display 0x003f003d: GL mask 0x2; bounds (2704, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    2013-08-24 9:03:57.437 PM WindowServer[96]: CGXPerformInitialDisplayConfiguration
    2013-08-24 9:03:57.437 PM WindowServer[96]:   Display 0x04271ac0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9c6b S/N 0 Dimensions 17.05 x 10.63; online enabled built-in, Bounds (0,0)[1680 x 1050], Rotation 0, Resolution 1
    2013-08-24 9:03:57.437 PM WindowServer[96]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2704,0)[1 x 1], Rotation 0, Resolution 1
    2013-08-24 9:03:57.472 PM WindowServer[96]: GLCompositor: GL renderer id 0x01021a02, GL mask 0x00000003, accelerator 0x00003a73, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
    2013-08-24 9:03:57.472 PM WindowServer[96]: GLCompositor: GL renderer id 0x01021a02, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    2013-08-24 9:03:57.476 PM loginwindow[44]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    2013-08-24 9:03:57.878 PM WindowServer[96]: Created shield window 0x7 for display 0x04271ac0
    2013-08-24 9:03:57.878 PM WindowServer[96]: Display 0x04271ac0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
    2013-08-24 9:03:57.968 PM launchctl[119]: com.apple.findmymacmessenger: Already loaded
    2013-08-24 9:03:58.045 PM com.apple.SecurityServer[16]: Session 100003 created
    2013-08-24 9:03:58.165 PM loginwindow[44]: Login Window Started Security Agent
    2013-08-24 9:03:58.442 PM SecurityAgent[127]: This is the first run
    2013-08-24 9:03:58.443 PM SecurityAgent[127]: MacBuddy was run = 0
    2013-08-24 9:03:58.502 PM coreaudiod[128]: Enabled automatic stack shots because audio IO is inactive
    2013-08-24 9:03:59.435 PM WindowServer[96]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    2013-08-24 9:03:59.489 PM WindowServer[96]: Display 0x04271ac0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
    2013-08-24 9:03:59.528 PM WindowServer[96]: Display 0x04271ac0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
    2013-08-24 9:04:00.498 PM UserEventAgent[120]: cannot find useragent 1102
    2013-08-24 9:04:00.511 PM locationd[138]: NOTICE,Location icon should now be in state 0
    2013-08-24 9:04:06.900 PM SecurityAgent[127]: User info context values set for
    2013-08-24 9:04:08.017 PM authorizationhost[139]: Failed to authenticate user < > (error: 9).
    2013-08-24 9:04:09.303 PM warmd[28]: [___bootcachectl_filter_out_sharedio_from_history_block_invoke_0:2321] Unable to open i386 shared cache: 2 No such file or directory
    2013-08-24 9:04:11.804 PM SecurityAgent[127]: User info context values set for
    2013-08-24 9:04:12.304 PM SecurityAgent[127]: Login Window login proceeding
    2013-08-24 9:04:12.766 PM loginwindow[44]: Login Window - Returned from Security Agent
    2013-08-24 9:04:12.797 PM loginwindow[44]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    2013-08-24 9:04:12.833 PM loginwindow[44]: USER_PROCESS: 44 console
    2013-08-24 9:04:13.023 PM com.apple.launchd.peruser.501[140]: (com.apple.gamed) Ignored this key: UserName
    2013-08-24 9:04:13.023 PM com.apple.launchd.peruser.501[140]: (com.apple.gamed) Ignored this key: GroupName
    2013-08-24 9:04:13.024 PM com.apple.launchd.peruser.501[140]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    2013-08-24 9:04:13.030 PM loginwindow[44]: Connection with distnoted server was invalidated
    2013-08-24 9:04:13.119 PM distnoted[145]: # distnote server agent  absolute time: 58.494680158   civil time: Sat Aug 24 21:04:13 2013   pid: 145 uid: 501  root: no
    2013-08-24 9:04:13.455 PM WindowServer[96]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    2013-08-24 9:04:13.748 PM blued[58]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    2013-08-24 9:04:13.817 PM WDButtonManager[153]: self-sent 'ascr'/'gdut' event accepted in process that isn't scriptable
    2013-08-24 9:04:13.830 PM WindowServer[96]: Display 0x04271ac0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
    2013-08-24 9:04:14.498 PM locationd[159]: NOTICE,Location icon should now be in state 0
    2013-08-24 9:04:15.200 PM com.apple.SecurityServer[16]: Session 100005 created
    2013-08-24 9:04:20.410 PM talagent[158]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
    2013-08-24 9:04:20.417 PM talagent[158]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
    2013-08-24 9:04:20.617 PM com.apple.launchd.peruser.501[140]: (com.apple.afpstat-qfa[187]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
    2013-08-24 9:04:20.617 PM com.apple.launchd.peruser.501[140]: (com.apple.afpstat-qfa[187]) Job failed to exec(3) for weird reason: 2
    2013-08-24 9:04:20.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=188[GoogleSoftwareUp] clearing CS_VALID
    2013-08-24 9:04:21.215 PM loginwindow[44]: Login items - LSOpenApplication returned error -10665, url=/Applications/Palm/Transport Monitor
    2013-08-24 9:04:21.215 PM loginwindow[44]: Unable to lauch startup item: (null)
    2013-08-24 9:04:21.216 PM loginwindow[44]: Login items - LSOpenApplication returned error -10665, url=/Applications/WD Backup.app/Contents/Resources/WDBackupMonitor.app
    2013-08-24 9:04:21.216 PM loginwindow[44]: Unable to lauch startup item: (null)
    2013-08-24 9:04:21.890 PM com.apple.launchd.peruser.501[140]: (com.apple.mrt.uiagent[178]) Exited with code: 255
    2013-08-24 9:04:21.989 PM WindowServer[96]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
    2013-08-24 9:04:22.231 PM Adobe Reader Updater Helper[190]: Adobe Reader Updater encountered errorCode 260
    2013-08-24 9:04:22.308 PM Adobe Reader Updater Helper[190]: Adobe Reader Updater encountered errorCode 1001
    2013-08-24 9:04:22.430 PM NetworkBrowserAgent[207]: Starting NetworkBrowserAgent
    2013-08-24 9:04:22.484 PM apsd[167]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
    2013-08-24 9:04:22.716 PM GoogleSoftwareUpdateDaemon[209]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
              com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
              com.google.Keystone.Daemon.Administration: 0 connection(s)
    2013-08-24 9:04:22.718 PM GoogleSoftwareUpdateDaemon[209]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
              com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
              com.google.Keystone.Daemon.Administration: 1 connection(s)
    2013-08-24 9:04:22.724 PM GoogleSoftwareUpdateDaemon[209]: -[KSDaemonAdministration(PrivateMethods) ticketsAllowUninstallWithError:] KSDaemonAdministration system Keystone will not uninstall with active tickets.
    2013-08-24 9:04:22.725 PM GoogleSoftwareUpdateDaemon[209]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
              com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
              com.google.Keystone.Daemon.Administration: 0 connection(s)
    2013-08-24 9:04:22.736 PM GoogleSoftwareUpdateDaemon[209]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
              com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
              com.google.Keystone.Daemon.Administration: 0 connection(s)
    2013-08-24 9:04:22.840 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
    2013-08-24 9:04:22.854 PM GoogleSoftwareUpdateDaemon[209]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
    2013-08-24 9:04:22.909 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
              <KSTicket:0x5d98a10
                        productID=com.google.Keystone
                        version=1.1.0.3659
                        xc=<KSPathExistenceChecker:0x5d9ab20 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
                        serverType=Omaha
                        url=https://tools.google.com/service/update2
                        creationDate=2010-06-26 15:36:58
              >
    Using server: <KSOmahaServer:0x697ed30
              engine=<KSDaemonUpdateEngine:0x5d8f0f0>
              params={
                        EngineVersion = "1.1.0.3659";
                        ActivesInfo = {
                                  "com.google.Keystone" = {
                                            LastActivePingDate = 2013-08-23 07:00:00 +0000;
                                            LastActiveDate = 2013-08-25 01:04:22 +0000;
                                            LastRollCallPingDate = 2013-08-23 07:00:00 +0000;
                                  "com.google.macphotouploader" = {
                                            LastRollCallPingDate = 2013-08-23 07:00:00 +0000;
                        UserInitiated = 0;
                        IsSystem = 1;
                        OmahaOSVersion = "10.8.4_i486";
                        Identity = KeystoneDaemon;
                        AllowedSubdomains = (
                                  ".omaha.sandbox.google.com",
                                  ".tools.google.com",
                                  ".www.google.com",
                                  ".corp.google.com"
    2013-08-24 9:04:22.926 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x69866f0
              server=<KSOmahaServer:0x697ed30>
              url="https://tools.google.com/service/update2"
              runningFetchers=0
              tickets=1
              activeTickets=1
              rollCallTickets=1
              body=
                        <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
                        <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
                            <o:os platform="mac" version="MacOSX" sp="10.8.4_i486"></o:os>
                            <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="1155" brand="GGLG">
                                <o:ping r="1" a="1"></o:ping>
                                <o:updatecheck></o:updatecheck>
                            </o:app>
                        </o:gupdate>
    2013-08-24 9:04:23.081 PM WindowServer[96]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 2.09 seconds (server forcibly re-enabled them after 1.00 seconds)
    2013-08-24 9:04:26.581 PM _networkd[214]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
    2013-08-24 9:04:29.922 PM _networkd[220]: Unable to resolve hostname(s)
    2013-08-24 9:04:30.274 PM GoogleSoftwareUpdateDaemon[209]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009]
    2013-08-24 9:04:30.275 PM GoogleSoftwareUpdateDaemon[209]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone) [com.google.UpdateEngine.CoreErrorDomain:702 - 'https://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009])
    2013-08-24 9:04:30.278 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
    2013-08-24 9:04:30.901 PM GoogleSoftwareUpdateDaemon[209]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
    2013-08-24 9:04:30.903 PM GoogleSoftwareUpdateDaemon[209]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
    2013-08-24 9:04:30.904 PM GoogleSoftwareUpdateDaemon[209]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
    2013-08-24 9:04:30.996 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
    2013-08-24 9:04:31.006 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
    2013-08-24 9:04:31.011 PM GoogleSoftwareUpdateDaemon[209]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
    2013-08-24 9:04:31.107 PM ntpd[98]: proto: precision = 1.000 usec
    2013-08-24 9:04:31.514 PM GoogleSoftwareUpdateDaemon[209]: -[KSUpdateCheckAction performAc

  • Removing punctuation from the beginning and end of a string

    I am working on a project for a "spell checking" program. So far the StringHash class is made, and the dictionary is read into a hash table. Then the document to be checked is specified via command line, the document scans through each word and checks to see if it is in the dictionary, if it is do nothing, if it is not then display it to console. The problem I am having is with a method in the main class. The method (I will post what I have so far) is called removePunct. The method should remove any punctuation from the beginning and the end of the string, nothing from the middle. Here is what I have so far:
    public static String removePunct(String word){
              StringBuilder wo = new StringBuilder(word);
              int x = (word.length()-1);
              if(!Character.isLetter(wo.charAt(0)))
                   wo.deleteCharAt(0);
              if(!Character.isLetter(wo.charAt(x)))
                   wo.deleteCharAt(x);
              return wo.toString();
    Any help would be much appreciated, I'm pretty certain the solution is either something completely different, or something so simple that I just missed it.

    The easiest way to do this is to just show you the actual file to be spell checked:
    -- outline --
    This directory contains Bison skeletons: the general shapes of the
    different parser kinds, that are specialized for specific grammars by
    the bison program.
    Currently, there are only three supported skeletons:
    - yacc.c
    It used to be named bison.simple: it corresponds to C Yacc
    compatible LALR(1) parsers.
    - lalr1.cc
    Produces a C++ parser class. It is still very experimental, and not
    yet supported. Please, subscribe to [email protected].
    - glr.c
    A Generalized LR C parser based on Bison's LALR(1) tables.
    These skeletons are the only ones supported by the Bison team.
    Because the interface between skeletons and the bison program is not
    finished, we are not bound to it. In particular, Bison is not
    mature enough for us to consider that ``foreign skeletons'' are
    supported.
    Copyright (C) 2002 Free Software Foundation, Inc.
    This file is part of GNU Bison.
    GNU Bison is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
    GNU Bison is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    GNU General Public License for more details.
    You should have received a copy of the GNU General Public License
    along with Bison; see the file COPYING. If not, write to
    the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
    Boston, MA 02111-1307, USA.
    What I need the spell checker to do is read each word, and strip any beginning or ending punctuation, e.g. (c) would become c. Pretty much punctuation consists of anything that is not a letter, hence the use of isLetter. I can easily modify the method to remove all punctuation using regular expressions, but I only want the beginning and end characters removed.
    Example of words:
    -yacc.c would become yacc.c and is not in the dictionary so it would be printed.

  • How to return start and end time in Unix epoch format

    Hi: I have a integer field (utime) in a table that stores the UNIX epoch time for a record. Every sunday around 2:00AM, I am running a query which should return records from last week. I want my condition to have the following in it's where
    WHERE utime between
    (convert sysdate-7 12:00AM to Unix time)
    AND
    (convert yesterday 11:59PM to Unix time)
    Can someone help me create this convert?
    Thanks
    Ray

    Yes, you seem to have worked out the logic of the expression correctly. Though, in your earlier post you had said that you want records within the range:
    WHERE utime between
    (convert sysdate-7 12:00AM to Unix time)
    AND
    (convert yesterday 11:59PM to Unix time)But now you are adding 14400 (4hrs) and deducting 72000 (20hrs) in your expression
    SELECT * from TABLE
    WHERE utime between
    ((TRUNC(SYSDATE,'DD')-TO_DATE('01/01/1970','MM/DD/YYYY'))*(24*60*60))+14400 AND
    ((TRUNC(SYSDATE-6,'DD')-TO_DATE('01/01/1970','MM/DD/YYYY'))*(24*60*60))-72000;Which makes your new condition to be:
    WHERE utime between
    (convert sysdate 04:00AM to Unix time)
    AND
    (convert sysdate-7 04:00AM to Unix time)
    Are you sure you need records from 4am-to-4am and not midnight-to-midnight? And yes, with BETWEEN condition you need to use expression '<low-value> AND <high-value>' and not '<high-value> AND <low-value>'!
    Besides this,
    1. You might want to use bind variables rather than hard-coded expressions in your statement. Infact your expression uses SYSDATE, so Oracle would need to get current SYSDATE for each row to evaluate the expression. Which is going to have its impact on performance. As your start-time and end-time values are not dependent on table data maybe you could have a code like this (assuming it is PLSQL code):
    start_time constant number := (convert sysdate-7 12:00AM to Unix time);
    end_time constant number := (convert yesterday 11:59PM to Unix time);
    <DML or Cursor with condition>
    WHERE utime between start_time and end_time;
    2. You said that your table already has values in unix-epoch-time in column 'utime'. How are these values inserted in the first place? Is there a function in your application that converts any given time to unix-epoch-time? Is yes, then use that in your code.
    3. If such a function does not exists, than rather than using hard-coded expressions it might be a good idea to create new functions for converting to and from unix-epoch-time and to get current unix-epoch-time from server.
    Using a function in the above case:
    start_time constant number := f_convert_to_unix_time( trunc( sysdate-7 ));
    end_time constant number := f_convert_to_unix_time( trunc( sysdate )) - 1;
    <DML or Cursor with condition>
    WHERE utime between start_time and end_time;
    And lastly, some of us might not know about Unix time, so here is a useful link http://en.wikipedia.org/wiki/Unix_time

  • Return from a method at the end of a thread

    Hi all,
    I've written a slideshow in a class implementing Runnable, overriding the run() method.
    I want that my a method "startSlideShow()" returns when the task of the thread ends (the thread mainly display images).
    I've tried the the join() method (see code below) but the displaying of the images doesn't occurs any more.
    public class SlideShow extends JPanel implements Runnable {
        //The  main thread to run the slideshow
        Thread slideShowThread = new Thread(this);
         * Launch the slideshow
        public void startSlideShow() {
            //launch the slide show
            slideShowThread.start();
            //build and launch the listening of the end of the slideshow
            //prob : it freeze the displaying
           try {
                slideShowThread.join();
                System.err.println(" thread ENDED");
            } catch (InterruptedException ex) {
                System.err.println(ex+" thread was stopped");
            //this method SHOULD returns when the slideshow ended
    public void run(){
    //here is the slideshow code...
    }I've tried several other piece of code but I didn't succeed to makes my startSlideShow() method returns when the run() method end.
    Could you help ?
    thank you

    SlideShow slideShow = new SlideShow();
    slideShow.setCompletionListener(new
    ew CompletionListener() {
    public void executionComplete(SlideShow source) {
    //Execution will continue here when slideshow is
    w is complete...
              Thread t = new Thread(slideShow);
              t.start();
    /Kajok, thank you a lot for this. This fit my needs as the parent class of slideshow shouldn't be of a specific structure now. I will use this technic.
    However, just a general remark about the threads and my wish to have a modal function.
    You said that :
    "As I told you, you should never ever block the AWT thread so you can't make it modal. UI programming is event driven.
    and I agree. the point is that I wanted to do something like the JOptionPane set at modal.
    Let's consider the jOptionPane as a metaphor (I don't want to implement my slideshow using optionPane, obviously...)
    When we call a jOptionPane, we wait for an user action, then the jOptionPane returns (usually returning the results of the user action) :
    value = JOptionPane.showOptionDialog(
                        contentPane,
                        "my question is",
                        "my title",
                        JOptionPane.YES_NO_OPTION, // need answer
                        JOptionPane.QUESTION_MESSAGE,
                        null, // default icon for message type
                        options,
                        options[1]); //default selected value);So I was thinking that it should have been possible make a class which display the slideshow and then retunrs, after a specific event, which is the end of the slideshow...like the structure of the JOptionPane do.
    Thank for your useful answers,

  • My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    Hello SamSax
    Check out the assist page below for troubleshooting call connectivity.
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Finding the value of the text starting from x1 and ending at x2

    Dear All,
    While reading a notepad's each line, I need to take the each lines value starting from say 15th position to 20th position. If i use it_notepad-text+14(5) and the text does not contains any data, it generates dump.
    pl. guide. Is there any function module to get the value of the string with starting and ending position.
    Regards,
    Vidhya

    I think the best is what G@urav suggested. Simple catching this exception will solve your issue
    data: word type string.
    loop at it_notepad.
       try.
           word = is_notepad-text+11(4). "get the required word
       catch cx_sy_range_out_of_bounds.  "and catch the exception in case the word is too short
       endtry.
    endloop.
    This way you won't get dump and will be able to skip the line which don't have required number of chars.
    Regards
    Marcin

  • My Airport Extreme basestation used to work but upon returning from holdidays it no longer allows me to connect wirelessly through it to the internet on my iPhone, iPads, ipod touches  and my apple tv2 cannot access the network either.  Wired still works

    When I returned from holidays I could not access the internet wirelessly through my Airport Extreme (5th gen) from my iPhone, iPod touches, ipads and my AppleTV 2 no longer can access the internet or the network either.  I can get access to the internet on my iMac when wired directly into an ethernet port on the Airport Extreme.  I have tried resetting my AirPort and created new networks but still doesn't want to co-operate.  If I get wireless internet it is very, very slow and incosistent.
    Any suggestions?
    Rick

        I see now that long questions are not going to be read and answered.  Understandable.  Since writing this I got help on one aspect of question and now have Airport Extreme visible through Airport Utility and it seems to work.   However the wireless printer still does print. On the printer's screen, it recognizes my wireless network and connects. When I try to print from the MacBook, the usual printer icon comes up, but with Printer is Offline.  Printer is Not Connected.  So far, nothing in Apple or Brother help has given me answer to this problem.  Any ideas would be appreciated.

  • I have been trying to get my iPhone to sync with a new computer.  As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone.  How do I get the apps on the old one to the iPhone and then the new c

    I have been trying to get my iPhone to sync with a new computer.  As a result I have ended up with many of my apps on the old computer, but missing from the the new one and the iPhone.  How do I get the apps on the old one to the iPhone and then the new computer?

    You don't. Backup your itunes library on the old computer and move it to the new computer.

  • Can we hide the tables and columns from subject areas in the front end

    Hi,
    Is there any way to hide the tables and columns from the subject area in front end.I need to create a report with some tables which the user does not want to see.So after creating the reprot can I hide those tables and columns in the front end

    Hi,
    Your question is not that clear to me...do you want to hide the entire table/column that dont want to show up in the front end then you could do in Presneation Layer in the RPD by going Permissions in the property of that object.
    But if you want to hide the column in the report that can be visible in the subject Area: go to column properties -> Column fomat...thereis Hide option.
    Can you please elaborate your question...what exactly you are looking for...
    --SK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Maybe you are looking for