"Return" key code (bottom right of keyboard, Director doesn't recognize

Dear All,
I am trying to write a script that takes place when a user
presses the RETURN key located on the numeric keypad-bottom right
corner of the keyboard-but director doesn't seem to acknowledge the
key when it is pressed. It doesn't even go into "on keyDown"
script. Any ideas from anyone who has done this? Director works ok
for the "big" RETURN key in the middle but not for this one.
Thank you
Alex

The two keys are not the same. On my PC there is only one
return key; they are usually marked with an arrow that symbolizes a
carriage return.
The one on the numeric keypad is called the ENTER key. Look
up the enter key in the docs.
Paul

Similar Messages

  • Issue in usability of Microsoft lumia 535 - Behavior of Key '- ' , on bottom right corner of home screen, is ambiguous.

    Hi All,
    I am new to this forum. And I may have incorrectly raised my concern here - over the usability aspect 'Microsoft lumia 535' mobile phone. Please help - to forward my concern to the correct forum in that case.
    I faced issue in using the key '->' on bottom right corner of phone's home screen (scroll down on the home screen to use the key). Clicking the key '->' should ideally take to the screen to it's right where all the applications are listed. As per known
    behavior of earlier phones of the lumia series like 630,525 etc.
    However, the behavior is ambiguous, sometimes the click on '->' takes to its right screen, and sometimes it refreshes the home screen. And sometimes there is no impact of the click. The behavior is thus improper and provides bad experience in using it.
    Earlier I thought this defect is specific to the phone I purchased, but further I analyzed other 'Microsoft lumia 535' - and the same issue was observed in all the other pieces of lumia 535.
    Please let me know, if it is issue and is already known, or if the behavior is intentional then what is the reason for the same?
    Regards,
    Azmun

    For help using Windows Phone please post on the Windows Phone forums on answers.Microsoft.com

  • Need ENTER / return key on LEFT side of keyboard

    I need an enter / return key (or key combo) on left side of my keyboard. Any idea how to do that?
    Thanks, in advance!

    Startly's QuicKeys is probably the least troublesome way because some programs ignore the system settings.

  • Return key not recognized on Mac mini during disk repair

    Our Mac mii needs to run a disk repair so we restart and hold cmd & r, then it gives options but using keyboard it doesn't recognize double tap or return key so we can't select disk repair - so in limbo - can anyone save us? Please???

    Boot off your *original* Install Disk , then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some models have a separate AHT CD.
    The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
    Memtest OS X...
    http://www.memtestosx.org/joomla/index.php
    Rember is a freeware GUI for the memtest ...
    http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html

  • How to disable "special" f-key function on Apple Wireless Keyboard in Windows 7

    Hi.  I dual-boot my iMac using an Apple Wireless Keyboard.  In Mac OS's "Keyboard" system preference pane, I've chosen to treat the F-keys as actual F-keys, and not the "special" function keys, such as volume control and screen brightness.  This however does not carry over to the Windows environment.
    I cannot find an option to do this on the Windows 7 side.  I've tried SharpKeys (popular Windows freeware key-mapping registry editor), however the program doesn't recognize the key being pushed (unless I hold the "Fn" key, at which point, it sees it as the F# key).
    To reiterate, I'd like to know how to use the F1 through F12 keys as F1-F12 in Windows 7, without having to use the "Fn" key.

    Hi alexia416,
    If you would like to use your Apple keyboard in Boot Camp with the standard function keys as the default, you may find the following article helpful:
    Boot Camp: Use the function keys on an Apple keyboard
    For other keyboard-related Boot Camp issues, this article is also useful:
    Boot Camp: About keyboards and key assignment for Microsoft Windows - Apple Support
    Regards,
    - Brenden

  • Will not boot - Black screen A2 code on bottom right.

    mobo:Z97S SLI KRAIT EDITION
    Samsung SSD - Windows and games are installed here
    WD HDD - Everything else is put on this one.
    Windows 7
    I installed an ISO mounting program called Gizmo Central onto my HDD
    After installation it said that it needed to restart. After it restarted I got a black screen with an A2 code. The screen will go completely black, and then it will back to the screen with the A2 code in the bottom right. It won't boot up BIOS, unless I do 1 of 2 things:
    1. power off the pc, unplug the sata cable from the HDD, power pc back on, bios and windows will boot up. I can then turn the pc off, plug the sata cable back into the HDD, and it boots up fine into windows, but if I reboot again, it goes back to that black screen with the A2.
    2. I have put in a disc into the dvd drive, and I do not get that screen. (I've been doing this as a workaround since it's much easier)
    I have tried a number of things to resolve this, but none of them have restored my computer to it's perfect working order that it was previous to installing this program.
    When I tried to uninstall that program it wasn't even on my installed programs list, so I deleted the folder it was in. This didn't resolve the issue.
    I have wiped everything off of my HDD drive. This did not resolve the issue.
    I have triple checked that my SSD is the first in the boot order. I even disabled the HDD from the HD boot order entirely. No change...
    I updated my motherboard drivers. No change.
    It's almost like for whatever reason my BIOS isn't listening to the boot order and doing my DVD drive, HDD, and then the SSD ever since I installed that Gizmo ISO mounting program.
    I set the BIOS to factory default settings. That did not fix this issue.
    I have use a windows system restore point from 2 days ago when it was working flawlessly. No change.
    I'm thinking about reinstalling Windows, but logically it doesn't make sense to do that since the error happens even if I power off/on from BIOS with the HDD plugged in, so it I'm willing to venture that it's not Windows at fault here.
    Also the computer used to boot up in like 8 seconds. It's still fast to boot up, but ever since this started to happen, it takes like 15-30 seconds for my usb mouse, and usb keyboard to register after windows starts up. It use to be immediate. My computer is so messed up right now, and I don't even know how it got like this or how to fix it. I'm pretty savvy and can follow directions well, so any help would be greatly appreciated.

    Quote from: JLio01 on 29-April-15, 06:56:47
    What intel USB driver version do you use? There's one more thing to try, try plug the kb/ms to USB 3.0 ports except the ones under the LAN port, and check if it happens again.
    I'm glad you recommended checking Intel drivers. I typed appwiz.cpl to go to the installed programs list in windows. Found "intel USB 3.0 extensible host controller". I tried uninstalling this. It made my mouse and keyboard not work for about 1 minutes. Windows downloaded some drivers for my devices, and asked to reboot. I rebooted. Mouse/keyboard responded right away! Just incase it was a fluke I rebooted another 2 times, and each time the mouse and keyboard are immediately responsive. I'm SO glad that my PC is back to it's original working order. Thank you to you all for taking time out of your day to help me. I really appreciate it!

  • Is there a way to get a soft keyboard on iOS to show ´join´ or ´send´ in the return key of a keyboard?

    I saw that the ReturnKeyType [1] only supports a subset of value possible on iOS [2].
    Basically the supported return key types are "done", "go", "next", "search" and "default" which corresponds to "enter" on iOS
    while iOS also supports "Google", "Join", "Route", "Send", "Yahoo" and "Emergency Call".
    Two of the iOS types "Join" and "Send" I would find quite useful in places I'm currenlty using the "go" return key type
    Is there anyway to get the soft keyboard to show this labels on iOS?
    Alternatively it would be great if "join" and "send" are added as Air ReturnKeyType's (e.g. they could default to "go" on other devices)
    Thanks
    [1] ReturnKeyLabel - Adobe ActionScript® 3 (AS3 ) API Reference
    [2] UITextInputTraits Protocol Reference

    I saw that the ReturnKeyType [1] only supports a subset of value possible on iOS [2].
    Basically the supported return key types are "done", "go", "next", "search" and "default" which corresponds to "enter" on iOS
    while iOS also supports "Google", "Join", "Route", "Send", "Yahoo" and "Emergency Call".
    Two of the iOS types "Join" and "Send" I would find quite useful in places I'm currenlty using the "go" return key type
    Is there anyway to get the soft keyboard to show this labels on iOS?
    Alternatively it would be great if "join" and "send" are added as Air ReturnKeyType's (e.g. they could default to "go" on other devices)
    Thanks
    [1] ReturnKeyLabel - Adobe ActionScript® 3 (AS3 ) API Reference
    [2] UITextInputTraits Protocol Reference

  • Wireless keyboard - return key has stopped working.

    The return key on my wireless keyboard has just stopped functioning along with the backslash key to the left of it.  Any ideas as to the likely cause, or has it just packed up? I'm having to use the keyboard viewer or the old USB keyboard for these functions - which is a pain.

    Hello:
    Try resetting the PRAM and SMC.  If that does not help, I would suspect a failed KB.
    Barry

  • Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

    Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

    All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
    Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
    I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

  • How can I reduce the size of a photo proportionally.  With my old Mac mini I was able to place the pointer on the bottom right corner  hold the shift key until I achieved the desires size.

    How can I reduce the size of a photo PROPORTIONALLY?  With my old Macmini I was able to place the pointer on the bottom right corner of the picture, hold down the shift key and move the pointer to achieve the desired size.  

    You'll need to use a 3rd party editor like one of these:
    Some Image Editors That Support layers:
    Photoshop Elements 11 for Mac - $79
    Rainbow Painter - $30
    Imagerie - $38
    Acorn - $50
    Pixelmator - $60 
    Seashore - Free
    Portraits and Prints - Free
    GIMP for Mac - Free
    Xee 2.1 - free
    My personal preference would be for Photoshop Elements for Mac. Most of these will let you select and copy a head from one photo, paste it into another photo, resize and place where you need it.
    PSE has a specific feature just for that function.  I belive the Adobe site for PSE has a demo video of that feature.
    OT

  • I accidentally pressed "Return" key and it opened around 100 finder windows. Now it won't close and when I right click on finder tab it says application not responding.

    I accidentally pressed "Return" key and it opened around 100 finder windows. Now it won't close and when I right click on finder tab it says application not responding.

    Iv'e tried that but that won't work either. Help please.

  • HT201178 when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?

    when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?

    Everywhere that I've checked it is not possible to do this. I would like to even do this using the vkb. I hate having to stretch my thumb all the way up just to send a message. It's messaging, not a report or email. Seems backwards. Hopefully some day Apple can add this option.

  • Return key on iMac Keyboard Has Suddenly Stopped Working

    I'm using an iMac purchased in April 2007 and it is using the older white Apple keyboard (model A1048).
    All of a sudden, after a shutdown and a startup, the Return key has stopped working (the Enter key on the keypad still works).
    Nothing was spilled on it and no one has hit it too hard. I popped off the key to check if there was anything that could explain why it wasn't working. No dirt and the key depresses properly.
    I also took the keyboard over to a Dell PC running WinXP and tested it there as well. Every key worked except for the Return key.
    So, my question is, is there some serious hardware flaw that basically means that I need to get a new keyboard or is there some other explanation and method for correcting the issue?

    Having the same issue, would love to know if you were able to resolve it. I'm also not able to use Tab, Return, and F12 for some reason.

  • Capture keyboard characters without hitting return key

    Is it possible to get a keyboard key typed character without requiring the user to enter the RETURN key?
    For example, the user press a key and the screen will echo the key pressed in console mode, not in GUI mode.

    Is it possible to get a keyboard key typed character
    without requiring the user to enter the RETURN key?The shell that's running in your console window will not give the kay strokes to the rpogram until the human hits enter/return. This is so the shell can do all the editing (EG backspace, etc).
    In unix you can put the console in 'raw' mode which lets every key stroke through. See the 'stty' command

  • Cannot keyboard shortcut "return" key

    I am trying to create a keyboard shortcut for the "return" key, I like to use it to "Go to sequence start"
    Every time i press "return" when selecting a key to choose it just removes the window.
    Any ideas?

    you do not need to press return to have it accept the new key. click on the current keyboard shortcut you want to replace until it has a blue underline and then press the new key you want to assign. the new keyboard shortcut should appear and the blue underline should be gone. thats it, just click ok to accept it.  i am able to assign the enter/return key to "go to sequence start" this way.  you may get warnings if that keyboard shortcut is being used by another function, you can use the undo button if you change your mind about the new shortcut key, and keep the previous setting.  or ignore the warning and hit ok to remove the keyboard shortcut from its old/previous assignment and keep the new setting.

Maybe you are looking for