Return material to vender ?
Dear all ,
what is flow ?
create po with 100 quantity send to vender then vender send to us ,then we do migo and miro
after we got 10 materials faulty
then how to send vender ?
after repair form vender how to in our system ?
means
create po 100 quantity me21n -
migo 100 quantity of material mov 101
get faulty 10 material
return to vender 10 materials
then vender send 10 material to us
Regards
shiv
>
shivmm wrote:
> Dear all ,
>
> what is flow ?
> create po with 100 quantity send to vender then vender send to us ,then we do migo and miro
> after we got 10 materials faulty
> then how to send vender ?
> after repair form vender how to in our system ?
>
> means
> create po 100 quantity me21n -
> migo 100 quantity of material mov 101
> get faulty 10 material
> return to vender 10 materials
> then vender send 10 material to us
>
> Regards
> shiv
PO created for 100, GR done for 100, then return delivery done against PO for 10 pieces, with movement 122, then when vendor sends the 10 pieces again, do subsequent delivery against material document of return delivery.
Similar Messages
-
Vendor return material (urgent)
Pls guide me Vendor return Business Process.
What I know:- eg I do the GR for 10 Nos. of any material, Then IV will be done. But some reason Management is decide that 5 Nos. of material has been return to vendor. then I made a PO for Vendor Return. then Done GR to Movement Type 161. Material is exciseable. On the time of GR Part 1 is posted & before IV Prat II also posted. then how cancel these documet. I use J1IEX What doc. no. we Put there PO for return vendor or GR no when posted for return.
Pls guide meFollowing is the correct process
Return PO, Tick return material option
MIGO with Mvt type 161
Then Go to J1IS transaction and put this material document number. against trans MATD.No need to do j1iex
follow thios process.
Regards
Kedar Kulkarni -
How to resolve price difference in case of Returning material through STO
We are receiving material from our plant A to plant B. Material is manufactured in plant A and Standard price (3 S) is maintained for this material. In plant B, 2 V is maintained for this material and no excise credit is taken here. Now when i am returning unsuitable material back to plant A, there is a price difference, due to which plant A is unable to take the credit.
Is there is any process so that same material cost is picked in sto when we are returning material to plant A
Edited by: Sunil Kalia on Sep 15, 2010 9:19 AM
Edited by: Sunil Kalia on Sep 15, 2010 9:20 AMIn manufacturing plant Sales price is maintained as Standard price in Z-table , which is material cost + manufacturing cost. On this cost material is inward to plant B. But when material is returned back, MAP is assigned in STO, which is material Cost. The issue is due to different valuation areas at plant level in the same company.
Is there is some process to link the original STO with Return STO as discount issue does not match the prices.
Regards,
Sunil -
Tcode to know the status of returnable material that is returned to the cus
Hi everyone,
My question: Suppose, I have transferred a returnable material to the customer through a movement type 452. Now I want to check if the material has gone to the customer. Though with Tcode MMBE gives us an overview of the stock situation of the returnable material, it does not clarify whether the material is in the hands of the customer.
Is there any Tcode by which we can see the material that is returned to the customer?
ThanksLike..SQL> select s.owner s_owner,s.synonym_name,o.object_type,o.object_name,o.owner
2 from dba_synonyms s,dba_objects o
3 where s.table_name = o.object_name
4 and s.table_owner = o.owner
5 and synonym_name='COUNTRIES';
S_OWNER SYNONYM_NAME OBJECT_TYP OBJECT_NAME OWNER
OE COUNTRIES TABLE COUNTRIES HR
BI COUNTRIES TABLE COUNTRIES SHEdited by: jeneesh on Sep 22, 2012 3:11 PM
Forgot to refresh.. -
Multiple Excise Invoice No for same Return Material Document
Dear All,
While generating excise invoice throu J1IS for Return Material document (Mov Type 122 - Return of Quality rejected material to vendor), it is observed that multiple excise invoice nos are getting generated for the same Return mat doc no.
System is not preventing in doing so.
Pl. advise how to restrict such excise invoice generation.
With Thanks & Regards
RatnaHi,
Use: J1I7 , In selection range you can give Excise Group, Excise Transaction Type as GRPO , Vendor Number, Material Document , Material or Purchasing Document , select Part 1 and part 2 Posted , Off.No is Excise Invoice No entered at the time of Excise Capturing.
Regards,
Vikas -
Return material to Reservation
Dear all,
How can I return material reference reservaion that it goods issued.
Example
1. Reservation A, material01, qty 5 ea (Movement type 201)
2. Goods Issued ref. reservation A material01, qty 5 ea
*3. I would return material01, 2 ea to reservation A. And if i display reservation A it should be show me 3 ea for qty withdrawn
How can i do step 3? please help me.
Thank in advance
Johni
Message was edited by: Johni
Johni JHi John,
Use tcode MB1A
Movement type : use the mvt type which is the reversal movement type of your reservation(like 201 was the mvt type for reservation then enter 202)
press enter
In the next screen , click on the goods issue (available at the top of the screen)select cancel with ref to reservation and enter ur reservation No.then adopt it.
then enter the qty u want to reverse and post it.
Now when u display the reservation using tcode MB23, u will find only 3qty as withdrawn.
Hope it wud have answered ur question
Reward if useful
Shawn -
Return material from cost center
Dear All,
Return material from cost center:- xx, Material:- yyy qty z Pc in inventory. create sales order for delivery.
They are materiel in prototype in R&D for customer loan
What is the Process that has to be follows in SAP for this can some explain.
sapuserhi
is it possible do more description
regards
R.T -
Return material- difference between MIGO(Returndelivery) and MIGO(GR -PO)
Hi friends,
What is the difference between the MIGO(Return delivery against material document) and MIGO( Goods Receipt against purchase order).
SAP Best Practice for Return material to vendor is to create return PO,MIGO against PO and perform credit Memo,if invoice received against PO.
What is the use/purpose of MIGO(Return delivery against Material Document) and MIGO( Goods Receipt against return PO)
ThanksIf the vendor is picking the return goods than you can retrurn agianst the materal document but if you are liable to return the goods than you can use return Po so the same qty will get opend in the main po and you can use the shipping functionality also.
e.g. if you have to pick, pack and ship. -
Return Material back from Vendor without PO
We are having problems returning material back from a Vendor without a PO. We had sent some of our product to a Vendor to have them restack the pallets. Now we cannot bring the material back in without referecning the PO. (RGA) (VA01). We are allowed to do this on the sales side of our business when we are dealing with customers but not with a regular Vendor. Is there some flag on the Vendor that I need to check? Please let me k now.
Hi
You could do a goods receipt with movement type 501 whish is Goods receipt without a Purchase Order but be careful has this has the effect of making stock appear from nowhere.
This can be done with transaction MB1C
I hope that this helps -
Return Material To vendor- Delivery address
Hi Friends,
When i create a PO for return material to the vendor with return flag on item level, In the Delivery tab of item details, I found the delivery address is my plant address instead of Vendor address. is that correct, why it displays plant address ?.
Is that because of Plant which i mentioned in the item level of PO?. How can i see vendor address in delivery tab?.
ThanksHi,
Please do the following things in the system:
That's right, you should create a customer master data with the supplier's name and address in the system, just like the normal customers;
Assign the customer number to the vendor master data, go to "Control" view in the general data, you can find the field named "Customer", input the number you created;
In addition, because the delivery note belongs to shipping process, you have to extend the material master data to sales views.
After these, you can start your operation of return delivery note now.
Good luck
Tao -
Vendor Consignment - Returned material from customer directly to consignmen
Hi,
I'm working with a consignment vendor process. I'd like to know how should I manage the return from my costumer. I'd like to move this returned material directly to my vendor consignment.
Is it possible? How can I do it? How affects it to the consignment settlement?
Points will be given
Thanks in advanceHi Roger,
We have 2 type of consignment process in SAP.
1. Vendor consignment (MM process) & 2. Consignment with customer.(SD process)
If the Customer is returning the item (or consignment item). ... it will be process as normal process...like goods receipt in to inspection ... if it is ok... then again we can move to Consignment ( with customer)...in seperate transaction.
Hope this is clear.
REgards
Anand -
Goods Recieving with RMA (Return Material Authorisation)
Hi CRM Folks
Please explain me the process/steps of receing goods against an RMA (Return Material Authorization) in SAP.How RMA will genrate from CRM Transction.what are the Tcodes are using to identify RMA.
Thanks & Regards
VikramDear,
Have a look at : http://help.sap.com/saphelp_crm40/helpdata/en/f0/0f10cbfca6d349b773f77f0967195b/content.htm
Regards,
Syed Hussain. -
Receiving goods against RMA (Return Material Authorization)
Please explain me the process/steps of receing goods against an RMA (Return Material Authorization) in SAP.
Hi,
As per my understsnding RMA functinality gets activated in RETURN AND REPAIRS process.
it is not delt with notification.
From notification.repair order - RAS is generated
Return delivery
Usage decesion in QM - once accepted by QM system create service order.
In service order the tab RMA reflects automatically.
Kapil -
Returnable & Non returnable material issue
Dear Guru,
Can any one explain about Returnable & Non returnable material. How its integrating with Gate entry pass. We need full cycle of that.
thanks
babuFor RGP & NRGP follow the following steps
Creation of RGP with reference to Purchase Order with item category u2018Lu2019.
Step 1:- Create a PO with item category u2018Lu2019 assigns the same material as component at
Material tab.
Step 2:- Issue the material to the vendor with movement type 541 with reference to PO
by using T- code MB1B
Step 3:- Take the print out by using T-code MB90.
Step 4:- Receive the material from vendor to our stock by using movement type 101
Please Note: -
For both the above mention process you have to create the material with Material type UNBW - Non valuated material.
For the second process purchasing view is mandatory along with basic data and accounting view
1 .Create Material with mat type UNBW
Select the following views from material master
u2022 Basic data 1
u2022 Basic data 2
u2022 Purchasing
u2022 General Plant data /Storage 1
u2022 General Plant data /Storage 2
u2022 Accounting 1
u2022 Accounting 2
2. Upload the Material by using MB1C at 0 (zero) price
Use Movement type 561
Enter 0 (zero) price as Loc. Curr.amnt
Save the doc
3. Create Purchase order by using movement type ME21n
Use document type RGP u2013 Returnable Gate pass
Enter all the mandatory fields
Please use the field Requisitioner as Indenter and Tracking No. as Approver
Note: Please check the box of u2018Free Goodsu2019
Enter the same material as component at item level under material tab
And save the document
4.
Issue the good to vendor by using T- Code MB11 with 541 mvt
Create the Material document with reference to PO
Note: - No accounting document will be generated
To check the accounting doc use T- code MB03
5. Good Receive from vendor
Create Material document with reference to PO
Use T- code MB01 with 101 mvt -
Sales Return Material document COGS Posting
Hi,
We have a scenario for Sales Return where the client requirement is to Cr the COGS account with same value as used in Sales Invoice.
Month 1 , Material Std Price is 10$
While posting GI in Sales Order entry is
Cr Stock A/C 10$
Dr COGS a/c 10$
Now Return is posted in Month 2 , Material Std Price is 15$
Requirement is to Post
Dr Stock A/C 15$
Dr COGS a/c 10$
Dr Difference a/c 5$
Where as Std SAP Posts Cr of 15$ to COGS only,
Pls suggest any clue / userexit / badi
Regards
vdheerajHi Deepak,
Thanks for your inputs.
we are implementing in pharma company. As per your suggestion the product which we are taking in as Return material is say for example a tablet which i cannot take in as dissamble production order which is not posssible.
So a thought to enter as separate item. I know this will affect inventory. ANy suggestion for this.
Because after tatking this as return item we have to book Incoming Excise invoice and then Credit memo to adjust the customer balance.
Any suggestion how to follow the steps in SAP. Your help will be very useful.
Maybe you are looking for
-
The new update does not allow me to start a new tab in the browser
After updating Firefox for Mac, Command-T, the prompt in the File menu, nor the + by the open tab will start a new tab.
-
Two FACT Tables, Some Common and Non-Common Dimensions
Hello all, a question i am sure you have faced in the past but still wanted to get your feedback. I have a few FACT tables and some dimensions that are shared (common dimensions). Rest of the dimensions are related to one or the other FACT tables. Wh
-
How to save the edited datagrid using array collection?
<?xml version="1.0" encoding="utf-8"?> <s:View xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" title="demo2">
-
How to download the Solaris 11.2 latest SRU in order to update the local repo offline
Hello, I am not able to find the SRU patchset to download in order to update the local repo offline. Any idea.
-
Proper array size to be used in bulk insert
What is the proper array size to be used in bulk insert? I have around 1 million records. Should I insert them all at a time or distribute them over many iterations.