Return material to warehouse - used materials

Dear All,
We have a scenerio that materials are issued by the Warehouse and it will be returned too. But somecases used materials are returned and of lesser value when compared to the new materials. but we need to keep a track of the used materials and some times we may reissue to other users.. For ex. spare parts. How do we handle the returned new materials and returned used materials to the warehouse differently?
Regards
RS

>
senthil_rs wrote:
> Dear All,
>
>
> We have a scenerio that materials are issued by the Warehouse and it will be returned too. But somecases used materials are returned and of lesser value when compared to the new materials. but we need to keep a track of the used materials and some times we may reissue to other users.. For ex. spare parts. How do we handle the returned new materials and returned used materials to the warehouse differently?
>
> Regards
> RS
This required can be met through split valuation, where material is handled as new and used. New is issued, then you receive the same material to used valuation type with customized movement which can be copy of 501. This way both prices for new and used can be maintained through valuation type. Then when you want to issue the used material, you can do that as well through used valuation type.

Similar Messages

How do I return material agaisnt a scheduling agreement using 161 movement

Hi!
How can I return material against an SA by 161 movement ?
Thanks and regards,
Suranjana

Hi
Is there an "Returns Item" check box in SA?, i guess, you'll have to create a separate PO with "Returns Item" checkbox inorder to receive goods with movement type 161.
Thanks
E.Avudaiappan

Re-Issue Sales Return Material

Hi,
Can anyone help me to address the following scenario in SAP B one.
I have Finished Item say "A". the customer returns this item after few days. For this i have to enter the Sales Return document which is standard functionality.
This return FG item will be reused in Bill of Material of "A" with other raw material.
Since same Item "A" will not be allowed as child item in the BOM i have created new Item called as " A   Ret" and added Sales return for this item and stock taken in Return warehouse.
for this return item i have the price which is mentioned in the Return document.
if i create production order as shown below
Parent :   -
Item A
Child: -
Item A   Ret
Child: -
RM1
Child: -
RM2
In this case to produce the Item A again i require to consider only the cost of the raw material added and not the "Item A Ret" since this item is already produce and reused in the production.
can anyone help to manage since in standard Production module it is considering cost for the Return item also which is having major impact on the cost for the Item A.
we are stuck with the entries for this scenario can anyone help please

Hi Deepak,
Thanks for your inputs.
we are implementing in pharma company. As per your suggestion the product which we are taking in as Return material is say for example a tablet which i cannot take in as dissamble production order which is not posssible.
So a thought to enter as separate item. I know this will affect inventory. ANy suggestion for this.
Because after tatking this as return item we have to book Incoming Excise invoice and then Credit memo to adjust the customer balance.
Any suggestion how to follow the steps in SAP. Your help will be very useful.

WM Material Master Data - extend materials inquiry

I have a question regarding WM Material Master Data - extend materials
what is the best practice for extending materials to Warehouse Management views 1 and 2. We have 1 new warehouse with fixed bins 001 Pallet, 002 Racking, 003 Floor, 004 Bins, 005 Chemicals, 099 Quarantine. My question is should we extend 3000 materials to each of the designated fixed bins to the Plant/Warehouse Number/Storage Type for WM views 1 & 2?
Thanks,

Hi
As suggested by Raj you can use Mass maintenance option MM17 to update the WM1 and WM2 view
or
You can use the LSMW option to upload from external file (e.g. xls, CSV files)
Regards
Manish Kumar

Vendor return material (urgent)

Pls guide me Vendor return Business Process.
What I know:- eg I do the GR for 10 Nos. of any material, Then IV will be done. But some reason Management is decide that 5 Nos. of material has been return to vendor. then I made a PO for Vendor Return. then Done GR to Movement Type 161. Material is exciseable. On the time of GR Part 1 is posted & before IV Prat II also posted. then how cancel these documet. I use J1IEX What doc. no. we Put there PO for return vendor or GR no when posted for return.
Pls guide me

Following is the correct process
Return PO, Tick return material option
MIGO with Mvt type 161
Then Go to J1IS transaction and put this material document number. against trans MATD.No need to do j1iex
follow thios process.
Regards
Kedar Kulkarni

Error while placing material in stores using MIGO

When I am trying to place a material in stores using T code MIGO,. qty. 5, below error is being displayed.
PL Stock in transfer exceeded by 5 NOS : 10600270 2000 S140
Message no. M7022.
thanks and regards.....
Asheesh

Hi Asheesh,
You can follow the below given path
IMG->Materials Management->Inventory Management and Physical Inventory->Define Attributes of System Messages--
>Settings for System Messages
Version 00:
Application Area: M7
No:022
Message Text:& exceeded by & & &
convert it to Warning.
OR
change the Quantity in the order.
you are trying to send more material to store then mentioned in the Order.
Hope it helps you.
Regards,
Yawar Khan

Return process in Warehouse mangement

Hi all,
can any one telll me the steps involved in the return process in Warehouse Management.
Waiting for UR early reply.
With Rgd
Vinod

Everything starts in inventory management.
once the goods movement is posted in IM, then you get the stock into the interim storage type in WM. at the same time you should get a transfer request which need to be converted into a transfer order to move the material into its final bin.
In case of a customer return:
CSR will enter a return order.
then a return delivery is created.
Then post goods receipt is done in reference to the delvery.
you get stock into the interim bin
convert the TR to a TO and confirm the movement.
then in inventory management a transfer posting is done to change stock status from return to own stock.
at the same time you get a transfer posting request in WM, which you can process with LU04 transaction, to get the status in IM and WM in sync.
finally or somewhere between in this process the CSR issues a credit note to the customer.

Multiple Excise Invoice No for same Return Material Document

Dear All,
While generating excise invoice throu J1IS for Return Material document (Mov Type 122 - Return of Quality rejected material to vendor), it is observed that multiple excise invoice nos are getting generated for the same Return mat doc no.
System is not preventing in doing so.
Pl. advise how to restrict such excise invoice generation.
With Thanks & Regards
Ratna

Hi,
Use: J1I7 , In selection range you can give Excise Group, Excise Transaction Type as GRPO , Vendor Number, Material Document , Material or Purchasing Document , select Part 1 and part 2 Posted , Off.No is Excise Invoice No entered at the time of Excise Capturing.
Regards,
Vikas

Return material to Reservation

Dear all,
How can I return material reference reservaion that it goods issued.
Example
1. Reservation A, material01, qty 5 ea (Movement type 201)
2. Goods Issued ref. reservation A material01, qty 5 ea
*3. I would return material01, 2 ea to reservation A. And if i display reservation A it should be show me 3 ea for qty withdrawn
How can i do step 3? please help me.
Thank in advance
Johni
Message was edited by: Johni
Johni J

Hi John,
Use tcode MB1A
Movement type : use the mvt type which is the reversal movement type of your reservation(like 201 was the mvt type for reservation then enter 202)
press enter
In the next screen , click on the goods issue (available at the top of the screen)select cancel with ref to reservation and enter ur reservation No.then adopt it.
then enter the qty u want to reverse and post it.
Now when u display the reservation using tcode MB23, u will find only 3qty as withdrawn.
Hope it wud have answered ur question
Reward if useful
Shawn

Return material- difference between MIGO(Returndelivery) and MIGO(GR -PO)

Hi friends,
What is the difference between the MIGO(Return delivery against material document) and MIGO( Goods Receipt against purchase order).
SAP Best Practice for Return material to vendor is to create return PO,MIGO against PO and perform credit Memo,if invoice received against PO.
What is the use/purpose of MIGO(Return delivery against Material Document) and MIGO( Goods Receipt against return PO)
Thanks

If the vendor is picking the return goods than you can retrurn agianst the materal document but if you are liable to return the goods than you can use return Po so the same qty will get opend in the main po and you can use the shipping functionality also.
e.g. if you have to pick, pack and ship.

Goods Recieving with RMA (Return Material Authorisation)

Hi CRM Folks
Please explain me the process/steps of receing goods against an RMA (Return Material Authorization) in SAP.How RMA will genrate from CRM Transction.what are the Tcodes are using to identify RMA.
Thanks & Regards
Vikram

Dear,
Have a look at : http://help.sap.com/saphelp_crm40/helpdata/en/f0/0f10cbfca6d349b773f77f0967195b/content.htm
Regards,
Syed Hussain.

Returnable & Non returnable material issue

Dear Guru,
Can any one explain about Returnable & Non returnable material. How its integrating with Gate entry pass. We need full cycle of that.
thanks
babu

For RGP & NRGP follow the following steps
Creation of RGP with reference to Purchase Order with item category u2018Lu2019.
Step 1:- Create a PO with item category u2018Lu2019 assigns the same material as component at
Material tab.
Step 2:- Issue the material to the vendor with movement type 541 with reference to PO
by using T- code MB1B
Step 3:- Take the print out by using T-code MB90.
Step 4:- Receive the material from vendor to our stock by using movement type 101
Please Note: -
For both the above mention process you have to create the material with Material type UNBW - Non valuated material.
For the second process purchasing view is mandatory along with basic data and accounting view
1 .Create Material with mat type UNBW
Select the following views from material master
u2022 Basic data 1
u2022 Basic data 2
u2022 Purchasing
u2022 General Plant data /Storage 1
u2022 General Plant data /Storage 2
u2022 Accounting 1
u2022 Accounting 2
2. Upload the Material by using MB1C at 0 (zero) price
Use Movement type 561
Enter 0 (zero) price as Loc. Curr.amnt
Save the doc
3. Create Purchase order by using movement type ME21n
Use document type RGP u2013 Returnable Gate pass
Enter all the mandatory fields
Please use the field Requisitioner as Indenter and Tracking No. as Approver
Note: Please check the box of u2018Free Goodsu2019
Enter the same material as component at item level under material tab
And save the document
4.
Issue the good to vendor by using T- Code MB11 with 541 mvt
Create the Material document with reference to PO
Note: - No accounting document will be generated
To check the accounting doc use T- code MB03
5. Good Receive from vendor
Create Material document with reference to PO
Use T- code MB01 with 101 mvt

Sales Return Material document COGS Posting

Hi,
We have a scenario for Sales Return where the client requirement is to Cr the COGS account with same value as used in Sales Invoice.
Month 1 , Material Std Price is 10$
While posting GI in Sales Order entry is
Cr Stock A/C 10$
Dr COGS a/c 10$
Now Return is posted in Month 2 , Material Std Price is 15$
Requirement is to Post
Dr Stock A/C 15$
Dr COGS a/c 10$
Dr Difference a/c 5$
Where as Std SAP Posts Cr of 15$ to COGS only,
Pls suggest any clue / userexit / badi
Regards
vdheeraj

Hi Deepak,
Thanks for your inputs.
we are implementing in pharma company. As per your suggestion the product which we are taking in as Return material is say for example a tablet which i cannot take in as dissamble production order which is not posssible.
So a thought to enter as separate item. I know this will affect inventory. ANy suggestion for this.
Because after tatking this as return item we have to book Incoming Excise invoice and then Credit memo to adjust the customer balance.
Any suggestion how to follow the steps in SAP. Your help will be very useful.

Procedure for return material from cost center

Is there any other Movement Type to return material from Cost Center except Cancellation of Goods Issue ?

Hi
I think no option other than cancellation.
You can try the the below scenario.
Try to receive the material into GR blocked stock using 103 if you want to use the material release it by 105
If you want to return then use movement type 124.
Hope it helps
Thanks/karthik

BAPI for creating Return delivery to vendor using transaction MIGO

Hi All,
         My requirement is to create Return delivery to vendor using transaction MIGO.
In MIGO transaction to create return delivery, the following steps needs to be followed.
i) Select the option A02 Return delivery, R02 Material document,
    Enter Material document xxxxxxxx.
    Reson for movement:xxxx
    By selecting the option item ok and via delivery check box, then save.
After saving return delivery needs to be created.
Is there any BAPI/FM exist for this requirement?
I made lot of search in sdn, but i could not find any thing helpful.
Appreciate quick help.
regards
surya

Hi
In VL02n->Extras->Delivery Output->Header
Check if you see any message type (LD00 ?).
If you do not see any, insert a message type LD00.
If you want to check the IMG settings, see Txns : V/71 (for delivery types RL/RLL) and V/73 (for Item category RLLN)
Best regards
Ramki

Return material to warehouse - used materials

Similar Messages

Maybe you are looking for