Return message for workitem in closed container

Dear all,
I have a custom developed workflow for the leave approval processes and i am facing a recurring issue with the workflow. The issue is sometimes the workflow terminates abruptly in the middle with the return as "Return for workitem XXXXXXXXX in closed container".
Can someone please let me know what might be the possible reason for the same and how to rectify the same.
Regards,
Saurabh Anand

Hello,
I can't find any reference to "in closed container" in SDN or OSS, are you sure that's exactly what the message says?
What sort of steps does this happen at? Are there any other messages in the workflow log?
How often does this happen, has it only started happening recently? If so, what's changed?
Also, what version are you on?
regards
Rick Bakker
Hanabi Technology

Similar Messages

  • Return Messages for a BAPI run in Background

    Hi all,
    I am running a BAPI( BAPI_SALESORDER_CHANGE ) in Background task, It works fine and updates the Sales order but i dont get any return messages.But based on the return messages i need to show up on the report which orders got updated and which are not.....
    Can anyone help me how can i get the return messages when i run a BAPI in background task......

    Thanks for the quick response....I think you got me wrong...I am not running the program as a background job....I am running only the bapi in background task as below.....
                CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
                   IN BACKGROUND TASK AS SEPARATE UNIT
                     EXPORTING
                          salesdocument    = v_vbeln
                          order_header_in  = it_bapisdh1
                          order_header_inx = it_bapisdh1x
                     TABLES
                          return           = it_return
                          partnerchanges   = it_bapiparnrc.
    When the bapi runs as a background task i dont get any return messages in it_return but the sales order gets updated....
    But i will have to capture the return messages as well....How can i achieve that ?

  • Return message for timeout in BPM

    Hey
    I have a synchronous scenario using BPM. My question is: If the web service I'm calling is down and I receive a timeout, can I then create a return message from BPM to the sender system that can take attributes from the original message that did not reach it's target? I have read that I can do this in case of an error, but I read someone saying this is not possible when we have a timeout...
    Thanks!
    regards Ole
    Edited by: Ole on Sep 23, 2008 1:16 PM

    Hi Ole,
    You can implement a Dedadline branch in your BPM that catches your time out.
    You can follow theese links:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ca/7c5c41fe06cf1ee10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e8/8e2d4233c8db2ce10000000a1550b0/frameset.htm
    Carlos

  • Want to display "no data Return" message for empty report

    HI all
    I have a requirement where i should show a message saying "No data Returned" under the empty table in the webI report.
    I know that we should use function
    =If(NumberOfRows([Data Provider Name])=0;"NO Data Available")
    I will create a empty cell and include this formula for that cell, but any one please tell me what exactly is the Data Provider Name? Is it the name of the univerese or something else? where can i get the Data provider name?

    Data Provider Name is the name of your query.  By default its name is Query 1.
    =NumberOfRows([Query 1])
    Or you may have changed its name when you edited the query in the query panel, so that's the name you have to use there
    For example:
    =NumberOfRows([My Query])
    If you have a lot of Queries in your report they may be Query 1, Query 2, Query 3 and so.
    Edited by: PadawanGirl on Feb 18, 2011 3:33 PM

  • Linked Server :: OLE DB provider "OraOLEDB.Oracle" for linked server "ABC" returned message "New transaction cannot enlist in the specified transaction coordinator. ".

    Hello All,
    As mentioned in title, i am stuck up with that articular error from last three days,
    i have following scenario, my SQL server 2008, my oracle 10g are on both same machine with OS Windows Server 2008.
    the following error generated on my management studio when i execute my procedure written in my SQL server. Following is original source code snippet after error massage.
    OLE DB provider "OraOLEDB.Oracle" for linked server "ORCL" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
    Msg 50000, Level 16, State 2, Procedure PROC_MIGRATE_MST_FRM_ORA_SQLSERVER, Line 43
    The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORCL" was unable to begin a distributed transaction.
    BEGIN TRY
    -- MIGRATION OF PR_COMPANY_MH START
    BEGIN TRANSACTION T1
    PRINT 'mILAN NNNNNNNNN 11'
    INSERT INTO PROD.PR_COMPANY_MH
    SELECT * FROM OPENQUERY(ORCL, 'SELECT * FROM PR_COMPANY_MH WHERE SQL_FLG = ''N'' ')
    PRINT 'mILAN NNNNNNNNN 12'
    UPDATE OPENQUERY(ORCL, 'SELECT SQL_FLG FROM PR_COMPANY_MH WHERE SQL_FLG = ''N''')
    SET SQL_FLG = 'Y'
    --EXECUTE ('UPDATE PROD.PR_COMPANY_MH SET SQL_FLG = ''Y'' ') AT [ORCL]
    PRINT 'mILAN NNNNNNNNN 13'
    COMMIT TRANSACTION T1
    -- MIGRATION OF PR_COMPANY_MH END
    END TRY
    BEGIN CATCH
    PRINT 'mILAN NNNNNNNNN 14'
    ROLLBACK TRANSACTION T1
    PRINT 'mILAN NNNNNNNNN 15'
    SELECT
    @ErrorNumber = ERROR_NUMBER(),
    @ErrorSeverity = ERROR_SEVERITY(),
    @ErrorState = ERROR_STATE(),
    @ErrorLine = ERROR_LINE(),
    @ErrorProcedure = ISNULL(ERROR_PROCEDURE(), '-');
    PRINT 'mILAN NNNNNNNNN 16'
    SELECT @ErrorMessage = ERROR_MESSAGE();
    RAISERROR (@ErrorMessage, @ErrorSeverity, @ErrorState, @ErrorNumber, @ErrorProcedure)
    PRINT 'mILAN NNNNNNNNN 17'
    END CATCH
    this perticular part is raising that error, and i had tried every configuartion on my local machine related to MS DTC.
    When i remove my transaction code, its work just fine no exception raise, but when i use then i.e. BEGIN TRAN, COMMITE TRAN, AND ROLLBACK TRAN. its giving me error, other wise its fine.
    Please Help or disscus or suggest why my transaction base code is not woking????
    thanks in advance.
    Regards,
    Milan

    Sorry again, I am new on any kind of forum, so i am learning now, following is the error massage generated by SQL Server. and its not
    an architecture problem, i had just included my complete architecture to be more informative while asking for the solution or suggestion. My real problem is T-SQL, i think and its related to Distributed queries raise in SQL Server in Oracle Link Server.
    OLE DB provider "OraOLEDB.Oracle"
    for linked server "ORCL" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
    Msg 50000, Level 16, State 2, Procedure PROC_MIGRATE_MST_FRM_ORA_SQLSERVER,
    Line 43
    The operation could not be performed because OLE
    DB provider "OraOLEDB.Oracle" for linked server "ORCL" was unable to begin a distributed transaction.

  • LiveCycle unable to access Cache Controller. Exception message - Error accessing the cache container - Error on GET action for cache Replicated:UM_CLUSTER_INVALIDATION_CACHE

    The incident starts after all the members are removed from the DCS Stack DefaultCoreGroup view and added back again by WebSphere Application Server. Following exceptions are seen after LiveCycle was added back in again to the view.
    We have a clustered environment with two nodes 2A and 2B. Server 2A crashed and therefore all members on 2B node were removed from the DCS view. Later the new core group view was installed but LiveCycle did resume operations as expected.
    Errors below:
    Exception caught while dealing with cache : Action - Get, ObjectType - UM_CLUSTER_INVALIDATION_CACHE, Exception message - Error accessing the cache container - Error on GET action for cache Replicated:UM_CLUSTER_INVALIDATION_CACHE
    ServiceRegist W   Cache get failed for service EncryptionService Reason: Error accessing the cache container - Error on GET action for cache
    Error accessing the cache container - Error on GET action for cache Local:SERVICE_FACTORY_CACHE
    The following message appeared for several different services:
    Cache put failed for service [CredentialService, ReaderExtensionsService,EncryptionService, etc]
    SSOSessionCle W   Error in cleaning stale sessions from the database. These sessions would be deleted in next trigger
                                     java.lang.RuntimeException: com.adobe.livecycle.cache.CacheActionException: Error accessing the cache container - Error on ENTRYSET action for cache Local:UM_ASSERTION_CACHE
      at com.adobe.idp.um.businesslogic.authentication.AssertionCacheManager.removeExpiredResults( AssertionCacheManager.java:125)
      at com.adobe.idp.um.scheduler.SSOSessionCleanupJob.execute(SSOSessionCleanupJob.java:69)
      at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
      at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
    Caused by: com.adobe.livecycle.cache.CacheActionException: Error accessing the cache container - Error on ENTRYSET action for cache Local:UM_ASSERTION_CACHE
      at com.adobe.livecycle.cache.adapter.GemfireLocalCacheAdapter.entrySet(GemfireLocalCacheAdap ter.java:219)
      at com.adobe.idp.um.businesslogic.authentication.AssertionCacheManager.removeExpiredResults( AssertionCacheManager.java:99)
      ... 3 more
    Caused by: com.gemstone.gemfire.distributed.DistributedSystemDisconnectedException: GemFire on 2B<v1>:9057/51073 started at Sun Aug 17 08:57:23 EDT 2014: Message distribution has terminated, caused by com.gemstone.gemfire.ForcedDisconnectException: This member has been forced out of the distributed system.  Reason='this member is no longer in the view but is initiating connections'
      at com.gemstone.gemfire.distributed.internal.DistributionManager$Stopper.generateCancelledEx ception(DistributionManager.java:746)
      at com.gemstone.gemfire.distributed.internal.InternalDistributedSystem$Stopper.generateCance lledException(InternalDistributedSystem.java:846)
      at com.gemstone.gemfire.internal.cache.GemFireCacheImpl$Stopper.generateCancelledException(G emFireCacheImpl.java:1090)
      at com.gemstone.gemfire.CancelCriterion.checkCancelInProgress(CancelCriterion.java:59)
      at com.gemstone.gemfire.internal.cache.LocalRegion.checkRegionDestroyed(LocalRegion.java:669 4)
      at com.gemstone.gemfire.internal.cache.LocalRegion.checkReadiness(LocalRegion.java:2587)
      at com.gemstone.gemfire.internal.cache.LocalRegion.entries(LocalRegion.java:1815)
      at com.gemstone.gemfire.internal.cache.LocalRegion.entrySet(LocalRegion.java:7941)
      at com.adobe.livecycle.cache.adapter.GemfireLocalCacheAdapter.entrySet(GemfireLocalCacheAdap ter.java:209)
      ... 4 more
    Caused by: com.gemstone.gemfire.ForcedDisconnectException: This member has been forced out of the distributed system.  Reason='this member is no longer in the view but is initiating connections'
      at com.gemstone.org.jgroups.protocols.pbcast.ParticipantGmsImpl.handleLeaveResponse(Particip antGmsImpl.java:106)
      at com.gemstone.org.jgroups.protocols.pbcast.GMS.up(GMS.java:1289)
      at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
      at com.gemstone.org.jgroups.protocols.VIEW_SYNC.up(VIEW_SYNC.java:202)
      at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
      at com.gemstone.org.jgroups.protocols.pbcast.STABLE.up(STABLE.java:276)
      at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
      at com.gemstone.org.jgroups.protocols.UNICAST.up(UNICAST.java:294)
      at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
      at com.gemstone.org.jgroups.protocols.pbcast.NAKACK.up(NAKACK.java:625)
      at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
      at com.gemstone.org.jgroups.protocols.VERIFY_SUSPECT.up(VERIFY_SUSPECT.java:187)
      at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
      at com.gemstone.org.jgroups.protocols.FD_SOCK.up(FD_SOCK.java:504)
      at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
      at com.gemstone.org.jgroups.protocols.FD.up(FD.java:438)
      at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
      at com.gemstone.org.jgroups.protocols.Discovery.up(Discovery.java:258)
      at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
      at com.gemstone.org.jgroups.protocols.TP.handleIncomingMessage(TP.java:1110)
      at com.gemstone.org.jgroups.protocols.TP.handleIncomingPacket(TP.java:1016)
      at com.gemstone.org.jgroups.protocols.TP.receive(TP.java:923)
      at com.gemstone.org.jgroups.protocols.UDP$UcastReceiver.run(UDP.java:1320)
      at java.lang.Thread.run(Thread.java:773)
    [22/08/14 0:28:10:237 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
    [22/08/14 0:29:10:252 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
    [22/08/14 0:30:10:268 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
    [22/08/14 0:31:10:283 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
    [22/08/14 0:32:10:298 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
    [22/08/14 0:33:10:313 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
    [22/08/14 0:34:10:328 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
    [22/08/14 0:35:10:343 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
    [22/08/14 0:36:10:358 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
    [22/08/14 0:37:10:373 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerException
    [22/08/14 0:38:10:389 EDT] 00000b4f WorkPolicyEva W   Exception thrown in background thread. Cause: java.lang.NullPointerExceptionor
    I have tried looking for the root cause about why LiveCycle was not able to resume normally, didn't find anything related.

    LiveCycle uses Gemfire as distributed cache for cluster members. If you are using TCP Locators (caching based on TCP instead of UDP), below are the possible situations which might lead to “ForcedDisconnectException” :
    - There is time difference between two nodes.
    - These is network connectivity issues.
    - The high CPU usage by the member crashed.
    -Wasil

  • Getting returned mail messages for emails I did not send

    I've recently started getting returned mail messages for emails I did not send. Why is this happening and how can I stop it?

    cadillacjoe69 wrote:
    That might be tough to do. Is there a rule I can use to help. The mail messages are so varied.
    I'd look at the headers (View -> Message -> Long Headers) to see if there's anything in common, then try to create a rule based on that.
    By the way, welcome to Apple's discussion groups.

  • Imac-- Upgrading elements 10 to elements 12. Did successful backup of 10.  When restore to 12 message said the disk in drive My Passport for Mac does not contain a valid backup

    IIMac      doing upgrade of Elements 10 to Elementys 12.  Did full backup of 10 on my external hard drive "MY Passport".  Rec'd message backup successful.  Did restore on 12 and rec'd message "The disk in drive My Passport for Mac does not contain a valid backup".  Any help suggestions?

    The funniest part of the whole situation, Apple Care explained it to me as some kind of feature. The told me how to adjust the time when my computer sleeps and recommend I don't shut it down, let it sleep and "instant wake". I would bet if you called them about your Macbook, they would suggest you just close the lid and let it sleep rather than shutting it down.
    Basically shutdown and restart have a problem and the solution is to not shutdown is how they explained it to me. They kept saying buzz words like "instant on" and "fast wakeup". My computer already could sleep and wakeup fast, but now shutdown and restart don't work right. I called them 3 times about it, but since they use these buzzwords, sounds like Lion is meant for a Macbook Air or a Mac with an SSD. If you have a normal hard disk, some of the saving/versions/resume features take too long to be written to the disk on shutdown. And when you start again, it takes a long time to reload the system to it's previous point.
    Even if I uncheck the box to reopen windows on next start, it reopens them anyways.
    If they can't give me a better explaination or some kind of fix, I will have to go back to Snow Leopard. I use my Mac in a production environment and depend on stability. They assured me before I upgraded that it would be stable and all the new saving and versions features could help my productivity. So far it's not helping me and downright annoying. You need to close all your windows before you close the program... if you have 5 windows open in terminal or textedit... every time you launch, they will launch all those windows. I just really want versions, not resume it seems.
    But I can deal with it opening a million windows, just can't take it getting stuck on booting or not shutting down properly. This is a "feature" that should be fixed. LOL

  • A site I need for consulting purposes requires an add-on known as "Intranet for Firefox". When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site.

    A site I need for consulting purposes (http://www.aegtelecom.com.pt/) requires an add-on known as “Intranet for Firefox”. When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site. However, being a steadfast Firefox user, I would prefer to use Firefox for this purpose.

    http://www.aegtelecom.com.pt/contactos <br />
    Have you tried contacting that web site's support department for help with that issue? <br />
    If that web site can't find the add-on it says is needed, they need to fix that problem with their servers.
    Or you can try using IE Tab2 to run IE in a Firefox tab. <br />
    https://addons.mozilla.org/en-US/firefox/addon/92382

  • How to show a single error message for all fields

    Hi
    I have a JSF from containing around 10 controls(input, select etc.) .
    Now I need to display an error message in case any of the mandatory control has validation error.
    Message format would be like
    "*Please,Complete the fields marked with yellow!"* The message I need to show in a div tag with Yelow background.
    Currently, I am getting individual default error message in case validation fails and related field is bordered with Yellow.
    My code is below.
    *<h:panelGrid columns="3">*
    *<h:outputText value="#{msgProv.bi_firstname}" />*
    *<h:outputText>*
    *<rich:spacer width="100px"></rich:spacer>*
    *</h:outputText>*
    *<h:panelGroup>*
    *<h:inputText*
    *value="#{brokerInformationFields.firstName}"*
    *label="#{msgProv.bi_firstname}" id="firstName" required="true">*
    *<f:validateLength maximum="10" minimum="2" />*
    *<rich:ajaxValidator event="onblur" />*
    *</h:inputText>*
    *</h:panelGroup>*
    *<h:outputText value="#{msgProv.bi_lastname}" />*
    *<h:outputText>*
    *<rich:spacer width="100px"></rich:spacer>*
    *</h:outputText>*
    *<h:panelGroup>*
    *<h:inputText label="#{msgProv.bi_lastname}" id="lastName"*
    *value="#{brokerInformationFields.lastName}" required="true">*
    *<f:validateLength maximum="20" minimum="1"/>*
    *<rich:ajaxValidator event="onblur" />*
    *</h:inputText>*
    *</h:panelGroup>*
    *<h:commandLink action="#{brokerInformationActions.submit}">*
    *<h:graphicImage value="/images/axa/btn_submit_from.png" style="border:0px;"/>*
    *</h:commandLink>*
    I am using (JSF1.2,Rich Faces 3.3.0,Facelets.)
    And a Phase Listener from
    http://balusc.blogspot.com/2007/12/set-focus-in-jsf.html
    This Phase listener is to border the control with Yellow in case validation fail.
    Now my Query
    *1) How can I show a single message for all fields as I marked above in case of validation failure?*
    *2) Now, the control is becoming yellow borderd when user clicks the submit button and validation fails.*
    *User can move from one control to other using tab. That time proper validation message is appearing.*
    *but the border of the control is not changing to yellow.*
    *What's the correcion can be made to meet that requirement too.*
    regards
    Roy

    Hi Nabheet,
    Thanks for your response.
    The FM returns the error messages if they are standard ones. For example, if the posting period is closed - the FM will not allow the Workflow to proceed further.
    But in this case, I have a custom error - for a particular Profit center, Cost center and I/O fields are mandatory(not at time of parking, but should be filled before posting).
    Since this is not a standard error, this FM will not stop workflow from proceeding further. How can I have the custom error captured in this FM?
    Thanks.

  • Return Code for scenario execution

    When we execute an interface,package or scenario.
    We can go in execution tab and see the start time , end time and Return code which has values like 0,7000,1722,1777 etc.
    This value is fetched from odi system table :-snp_sess_task_log.
    This table contains the log status for an execution . it contains start time, end time ,status code and all.
    My problem is that i want to know which table stores the status code that table snp_sess_task_log picks from.
    I mean is there any master table containing all the error codes/status codes that can occur in a scenario execution?

    I mean is there any master table containing all the
    error codes/status codes that can occur in a scenario
    execution?The code and the message come from the RDBMS...
    But they are stocked on a table after raising.
    Try this on your work rep connexion:
    SELECT *
    FROM SNP_STEP_LOG L, SNP_SESS_STEP SS,SNP_SESSION S,SNP_EXP_TXT X
    WHERE
    L.SESS_NO = SS.SESS_NO AND
    L.NNO = SS.NNO AND
    S.SESS_NO = L.SESS_NO AND
    STEP_STATUS = 'E' AND
    L.I_TXT_STEP_MESS=X.I_TXT

  • Return Process for Depot Excise Billing.

    Hi,
    We are following Depot Excise Billing Process. Where we are using Stock Transport Purchase Order Process for transferring the goods from Mfg.Plant to Depot.
    Now, we require return process for returning the Goods from Depot to Mfg. Plant. Please also confirm Excise Register needs to be updated? If yes, please tell us the transaction for the same.
    For satisfactory answer ful points will be rewarded.
    Thanks and Regards,
    Dilip Shende

    Hi Murali,
    I have followed the procedure given. However, in J1IEX transaction system gives me error message "Excise Invoice 9001000027 28.05.2008 of plant 410027 does not exist"
    Where Excise Invoice 9001000027/28.05.2008 is the number generated in T.Code J1IJ. And 410027 is Vendor code.
    Please give your valuable suggession to solve the issue.
    Thanks and Regards 
    Dilip Shende

  • How to show multiple messages for a single exception

    hi
    Please consider this example application created using JDeveloper 11.1.1.3.0
    at http://www.consideringred.com/files/oracle/2010/MultipleMessagesExceptionApp-v0.01.zip
    It has a class extending DCErrorHandlerImpl configured as ErrorHandlerClass in DataBindings.cpx .
    Running the page and entering a value starting with "err" will result in an exception being thrown and multiple messages shown.
    See the screencast at http://screencast.com/t/zOmEOzP4jmQ
    To get multiple messages for a single exception the MyDCErrorHandler class is implemented like
    public class MyDCErrorHandler
      extends DCErrorHandlerImpl
      public MyDCErrorHandler()
        super(true);
      @Override
      public void reportException(DCBindingContainer pDCBindingContainer,
        Exception pException)
        if (pException instanceof JboException)
          Throwable vCause = pException.getCause();
          if (vCause instanceof MyMultiMessageException)
            reportMyMultiMessageException(pDCBindingContainer,
              (MyMultiMessageException)vCause);
            return;
        super.reportException(pDCBindingContainer, pException);
      public void reportMyMultiMessageException(DCBindingContainer pDCBindingContainer,
        MyMultiMessageException pException)
        String vMessage = pException.getMessage();
        reportException(pDCBindingContainer, new Exception(vMessage));
        List<String> vMessages = pException.getMessages();
        for (String vOneMessage : vMessages)
          reportException(pDCBindingContainer, new Exception(vOneMessage));
    }I wonder if calling reportException() multiple times is really the way to go here?
    question:
    - (q1) What would be the preferred use of the DCErrorHandlerImpl API to show multiple messages for a single exception?
    many thanks
    Jan Vervecken

    fyi
    Looks like using MultipleMessagesExceptionApp-v0.01.zip in JDeveloper 11.1.1.2.0 (11.1.1.2.36.55.36) results in a different behaviour compared to when used in JDeveloper 11.1.1.3.0 (11.1.1.3.37.56.60)
    see http://www.consideringred.com/files/oracle/img/2010/MultipleMessages-111130versus111120.png
    When using JDeveloper 11.1.1.2.0 each exception seems to result in two messages where there is only one message (as intended/expected) per exception when using JDeveloper 11.1.1.3.0 .
    (Could be somehow related to the question in forum thread "multiple callbacks to DCErrorHandlerImpl".)
    But, question (q1) remains and is still about JDeveloper 11.1.1.3.0 .
    regards
    Jan

  • How to create a navigateable messages for SALV in FPM message area

    We have some problems raising messages for errors in a ALV table. Messages reported by the ALV table itself (like a character entered in a number field) are displayed in the FPM message area and the message is mapped to the field causing the error (navigation link). When we try to raise an own message out of the application controller of our building block which carries the ALV, we didnu2019t manage to have the mapping between the error message and the ALV-field.
    We already tried several versions of calling the message method (using the elements of the context of the calling application as well as the context of the mapped ALV compontent):
    CALL METHOD wd_this->gr_msg_manager->report_t100_message
          EXPORTING
            iv_msgid              = '/ISDFPS/MSG_GAF_PE'
            iv_msgno              = '047'
            iv_parameter_1        = lv_par1
            iv_parameter_2        = lv_par2
            io_component          = lo_INTERFACECONTROLLER
            io_controller         = lo_api_interfacecontroller
            io_element            = lo_element
            IV_ATTRIBUTE_NAME     = lv_attribute
            iv_severity           = if_fpm_message_manager=>gc_severity_error
            iv_lifetime           = if_fpm_message_manager=>gc_life_visibility_automatic
            is_navigation_allowed = abap_true
            it_attributes         = lt_attributes.
    Does anybody know a solution or maybe an example where a error message is linked to an field in the SALV and reported in the FPM message area using the above mentioned method call?
    Thanks and best regards
      Gerald
    Edited by: Gerald Reinhard  on Mar 31, 2009 10:56 AM

    Just to clarify, what I am having trouble with is finding where exactly to plug in the name of the plant to be filtered? If using a message type such as MATMAS in a distribution model, it is very straight forward to navigate down from the 'Data filter active', and assign a value to whatever field you wish to filter via the 'List of Values'.  But in this example, message type QPMK required use of the BAPI MasterInspectionChar, and therefore the different method in creating the filter. 
    I cannot find similar functionality when navigating the BAPI related row, for MasterInspectionChar. The 'Change Filter' dialog popup displays a row for 'Container' and then 3 more rows containing 'BAPI structure...'.   Clicking the 'Attribute' checkbox on any of these rows sets 'Data filter active' as a node under the BAPI.  Double clicking the 'Data filter active' brings me back into the same dialog, and selecting any row with an attempt at this point to create a filter results in the 'Select node: content-dependent parameter filtering' warning.  Is this warning occuring because of missing configuration?
    Thanks - Mike

  • Error message for  Unable to connect (BIB-16633)

    Dear All
    I use Oracle Jdeveloper10g (win32), Oracle database10g or 9i (win32 ver). But Failure to connect to OLAP service.
    Can anyone give me what is the error message for BIB-16633.
    Would be really grateful if you could give me a solution as soon as possible.
    Thanks & Regards,
    Mr.Tsang. Hong Kong

    For database versions you need to have at least 9206 for 9i and 10.1.0.4 for 10g. This requires you to apply the 9206 patchset to 9i and the 10.1.0.4 patchset to the 10g base install.
    Please note there are a lot of steps invloved in the patching process and you must make sure you have completed all the steps before creating your OLAP schema. Most problems occur because the patching process is incomplete and the OLAP option is in an invalid state.
    You can check the state of the OLAP option using the following commands in SQLPlus:
    column comp_name format a35
    SELECT comp_name, status, substr(version,1,10) as version
    from dba_server_registry order by modified;
    Once the OLAP option is in a valid state, then you must ensure the OLAPSYS account is unlocked. To test the OLAP environment you can install the BI10G sample schema which will create a new user account called CS_OLAP which contains an Analytic Workspace.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oracle Corporation

Maybe you are looking for

  • Video preview is not updating my changes

    Hi everyone, First I would like to let you know that I am really excited to be in this comunity (please excuse my english, I haven't practice it in a while) and I thank you all in advance for reading my question. Well, the problem I have is regarding

  • Finding the first X with exactly one Y

    Suppose you have a table DEPT_EMP with columns DEPT and EMP and there can be many employees in a department. I want to find all the departments with exactly one employee and also the sole employee's name. How would you recommend doing it. The one way

  • An unhandled win32 exception occurred in crw32.exe

    Hi, We just got a new Win2003 small business server and installed Crystal Reports 2008 and Crystal Reports Server 2008. I'm trying to work with some existing reports created in CR XI that access SQL Server 2005.  I am able to access SQL Server tables

  • Documentation for Translation Tool in BW (SLWA)

    Hi, i am just trying to translate an infocube using the translation tool in BW (Transaction SLWA). It is not self-explaining, so i was not able to translate anything. Does anyone has some information/documentation about how to use it ? Best regards S

  • ChaRM actions reset for developer

    Hi I am configuring ChaRM workflow. For the devloper I have not done any changes in the actions, whereas whenever I 'create transport request' through developer's actions after that the available actions are again back to the old one i.e. 'Set to in