Return new HH4 and wait for the HH5?

I am on an Infinity exchange but still waiting for my cabinet to be upgraded so stuck on ADSL for now. I've just received the HH4 I ordered but have just noticed there is a HH5 due before xmas. Would I be better off returning the unopened 4 and waiting for the 5? Does anyone know if the 5 will be more epensive? I think I am able to re-contract with BT as I've been with them for over a year now. I can't help but feel the separate modem of the 4 would be desireable come the time I do get on Infinity.
BT support tell me they can't gurantee the availability of the HH5 come launch as it is predominantly aimed at the new 300Mbit/s users.
Thanks

there is currently no known release date for The HH5 as it is still a trial device and cannot until released be purchased
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

A New MBP (and one for the road: any highly-recommended external drive for.

If I order a new MBP 17" for architecture and planning grad program, will SL come installed on the machine? Is SL considered a whole new OS or jut an update to Leopard? I am not even sure I am wording the questions correctly, so I apologize if I am not. I stopped at Tiger because the Leopard OS looked a bit too intimidating for me back then but I think I can deal with it now. Is it a big set-back that I did not learn how to use Leopard and now I am getting SL?
thanks for any help in this area.
I will throw this out there. I also need a decent but very heavy duty external hard drive to use for the work done with CAD. Any recommendations on a top-of-the-line heavy duty external hard drive? I guess the case is the main thing but the drive should be able to take some extra abuse because I baby the MacBook Pros but sometime the external drives get the abuse. I think USB2.0 is good enough for what I need.
Thanks Again

I would imagine that you could turn up good and bad reports on any drive. I have been highly satisfied with my 3 LaCies, two dating back to 2004. And, LaCie has very good phone support.
I use only clones and drag and drop for data changes between clonings. If I had to choose one method of backing up, then I definitely would use this process. Still, one can take a dual approach other than mine. The idea is to have a clone, which is updated fairly recently, to serve as a fail-safe, system backup, and restoration device. And, one could still use TM for day-to-day backups because of the flexibility it allows in moving backwards in time to retrieve data and because it updates automatically frequently. I want to experiment more with TM. So, I will move to this sort of dual system in the near future--as soon as I figure out which partition on my main external I can do without.
For cloning, I like SuperDuper because it has the ability to make incremental clones--thus, shortening the recloning process significantly. CCC is good, but I have never used it. Actully, Disk Utility is a highly respectable cloner, but it does not have as many options as the others, including not having the ability to make incremental clones.

Should I install 2009 labview on a new pc or wait for the new version?

Solved!
Go to Solution.

The maintenance release is officially called Service Pack 1. It will be released sometime in Q1 2009, and future versions of LabVIEW should also expect a service pack in that timeframe. Stay tuned for exact release dates.
Since you need LabVIEW installed to install the Service pack, I don't think there is any benefit to waiting, unless you want to wait for NIWeek in August, as mentioned
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

How can I e to these new terms and conditions for the App store? I can't find an "AGREE" or "ACCEPT" option anywhere

I am prompted that I must agree with the new terms and conditions of Itunes before I can download an app but have no place to agree to it or accept it. Any advise/

Try firing up your computer and accessing iTunes that way and get it to trigger the agree page. Worst case scenario you may need to download a free app to trigger the agree popup.

No matter what app im in itll close,and im typing and ill get 5 letters out and wait for the phone to catch up

any help?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Remotely invoke DS job and wait for job

Hi,
We are running DS 4 SP2 on Linux and have generated our job script from
the console. We need to be able to invoke a DS job from scheduler
(autosys) running on AIX and wait for the DS job to complete so the
return status is passed back to autosys.
We are planning to replace informatica with DS, informatica has a utility
pmcmd which allows remote invocation and will also wait for the job to
complete. Is there a similar utility in DS?
Alternately, if we installed DS on the remote AIX server, would it be
able to remotely start/wait for the job on the Linux server?
Thanks,

you can export the job execution command for a job from management console and use that to run the job from auto sys, the script will start job aluncher which has a option -w (by default it waits for job to complete) which tell whether the launcher process waits for job to complete or starts the job and exit

How do I optimize "Waiting for the next frame"

When running my swf file in release build, the first time I start the browser after cleaning the browser cache, the .swf will appear in less than a second. If I attach scout, I can see it is around .7 seconds to finish.
However, after this run all subsequent times I load the page, it takes ~3 seconds.
When I look at scout, I see almost identical CPU and memory use , but it is spending ~2.3 seconds "Waiting for the next frame". (almost an extra 700ms per frame).
There is no requirement for animation, all of the content is very static. I'd just like to render it as fast as possible.
I know it's not related to caching the .swf file because I have tried turning off the caching (by adding a random parameter) and verified using Httplogger that it is always downloading a new .swf file. (I turned back on caching). So I'm kind of not sure what to do next...
What things can I try to optimize this? Are there places I can read about this issue?
(P.S. >> I notice it spends a lot more time "Waiting for the next frame" when I build a debug version. Don't know if that's relevant...)
Thanks!

There's nothing you can do about "Waiting for next frame" - this is simply the time when Flash Player has finished doing everything it needs to do for the frame, and waiting for the OS to wake it up again. This depends on the framerate you set in your swf - roughly speaking, the waiting time is the budget (1/framerate), minus the time Flash Player spends doing actual work.
You can find more information here, about understanding how the data you see in Scout relates to how Flash Player works:
http://www.adobe.com/devnet/scout/articles/understanding-flashplayer-with-scout.html
btw, you shouldn't look at performance in a debug swf - you'll get wildly misleading results.

Messages waiting for the transport confirmation

Hi,
in message monitoring SXI_MONITOR process view, the message status with 'message being sent' and showing the clock sysmbol and waiting for the transport confirmation.
could you please suggest on this.
many thanks.
regards,
kaushal

hi Manisha,
this is the legacy 2 legacy system BPM is used for synchronous messages.
thanks and regards,
kaushal

Now i cannot see my bookmarks toolbar icons in firefox 4, i could before but now the images have dissapeared, i can still use the bookmarks, but have to wait for the box to come up explaining wich link it is to know what im choosing

i had my bookmarks tab set up to show no names of bookmarks just the icons, the button is still there but i cant see any icon, the link works fine, the only issue here is the icon does not show so i cannot decipher between the links unless i hover over each button and wait for the message details

Did you edit the names to clear them or did you use other means like an extension or code in [http://kb.mozillazine.org/UserChrome.css userChrome.css] ?
Many extensions haven't been updated yet to work properly in Firefox 4.0
* CheckPlaces: https://addons.mozilla.org/firefox/addon/10897
* Favicon Picker 2: https://addons.mozilla.org/firefox/addon/3176

New iphone, should i return and wait for macworld?

Hi everyone,
I have a new iphone, it was purchased on 12.21.07. I love the phone, but it has been a little slow for me and has been freezing every now and then. I've been weighting the option of returning the phone and waiting for a possible upgrade announcement at macworld. Anyone have any opinions on this? I feel like potential upgrades are going to be offered in the flash drive size and 3g compatibility will probably be announced.
input.. anyone?

Tamara wrote:
DwindleFlip wrote:
3G or not, AT&T has very little 3G coverage in the entire US. Look at their coverage map for 3G service. Its only in the richest of neighborhoods here in NY.
Most major metro areas in the US have 3G now which accounts for where most people live. I live in the Tampa/Orlando corridor and we have 3G in our town and it's definitely not one of the richest towns in the area.
Why is AT&T being so lame out here in NY then
Anyways i was definatly wrong, it does appear that 3G is more widely available on AT&T than i had thought. When i bought the iphone i did a quick search in NYC area and California, to see how much 3G coverage there was. in CA its pretty sparse, although its in major parts of CA.
Here in NY, its missing on most of Long Island, and pretty much only serves the NYC metro area and the Hamptons... which most certainly is about wealth.
Message was edited by: DwindleFlip
Message was edited by: DwindleFlip

My credit card was stolen,since i cancelled the card and waiting for a new one i cant update any of my apps because of the billing info is incorrect,how can i update without my new card?

my credit card was stolen,since i cncelled and waiting for a replacement i cant update any apps or dl any apps because the billing info says its incorrect now,how can i update and dl while waiting for my new card?

It would be best for you to open iTunes, sign in and view your account. If all the purchases were paid already instead of entering your new card information, it will give you an option for "NONE" as a payment method. Again this is not applicable of you have a pending charges with iTUnes

New iphone. someone else put in their username and password. time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ?

new iphone. (someone else put in their username and password. so i had lots of apps that i had to eliminate but do NOT wish to compromise the contact list) time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ? then, how do i backup contacts and proceed before updating iphone?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes or iPhone forums.
Regards.

I have an I phone 4s, have had it little over a month and the charger is no longer working. Now I have to return it at my inconvenience and wait for a replacement. I am very disappointed considering it is Apple. Has anybody else had this problem?

I have an i phone 4s, I have had it just over a month. The charger is not working and it has to be returned. Very disappointed considering it is Apple I expected better and have never had this problem with any other phone. Now I have the inconvenience of having to return it and waiting for a replacement and in the meantime I'm without a phone. Has this happened to anyone else?

Wow, life is certainly tough for you.
S***t happens. That's why there's a warranty.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.

Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version?

Return new HH4 and wait for the HH5?

Similar Messages

Maybe you are looking for