Return/Replacement Confirmation quantity is exceeding order quantity

Hi All,
When an R/R is replicated from CRM to ECC in the sales order the confirmation quantity is exceeding order quantity .
What can be possible reason for this behavior ?
Kind Regards,
Naval

Hi Naval,
I can think of possible reason is rounding profile is activated on item category to round up based on the product.
Thanks
Ajay

Similar Messages

Delivery quantity should not exceed order or confirm quantity

Dear Friends,
How to handle a below scenario,
Sales order is for 100 Tons.Partial delivery is allowed.
Now delivery quantity should be equal to 100 Tons.Delivery quantity should not exceed order quantity.
I mean delivery quantity must be equal to order quantity.
Thanks in advance.
Regards,
Shrikant

Dear Ram/Ramnath,
I have maintained the B for Check Overdelivery.Transaction code used is 0vlp.Item catg is TAN
Check Quantity 0 is A
Check Minimum Quantity is A
Now I ahve created a Sales Order for 10 Tons.
Created two delivery notes of 4 tons and 8 tons respectively.
While creating second delivery for 8 tons I do not get any error message.
Transaction code VOV7.Here completion rule is blank as it is relevant for Quotation and contracts.
Is there anything need to do?
Thanks in advance.
Regards,
Shrikant

The sum of the confirmed quantity exceeds the sum of stock items

Hi,
I have two sales order. Material is same. Both of them related project stok.
First sales order's qty=1. I created purchase order and post goods receipt.
Second sales order's qty=2. I created only purchase order.
I cannot create delivery for first sales order. System giving message.
Information message : The sum of the confirmed quantity exceeds the sum
of stock items
20000978 10 Only 0 ST of material 7ML18301CF available
20000978 10 An item with no delivery quantity is not permitted. Item will be deleted.
But I have a 1 qty on project stock.
Please help me.

hi,
this is to inform you that,
please run this report in SE38, SDRQCR21 if you have any inconsistencies in the system.
it seems there is an issue with MARD-DISKZ & please correct it.
but i have a doubt MB51 is material document llist. why you are checking stock there.
please confirm.
regards,
baljia
Edited by: balaji timmampalli achari on Nov 17, 2010 9:00 AM

Confirmed quantity in static credit check in sales order

what our requirement is ...we have a static credit check activated.
while creating the sales order when ever the customer exceeds the credit limit the check will be activated and the order is blocked with 0 confirmed quantity.
but we want the confirmed quantity should come as the that of standard order irrespective of credit block.we need the confirmed as well as block should also be there , so tell us is there any settings in the configuration need to be done to acheive this.

Hi,
As per my understanding u need use routine.
please read this:example of routine.
User requirement for confirmation of quantities in availability check
   This is an example of a subsequent function requirement. If this
   requirement is met, then the system will confirm quantities for the
   sales document line item. If not, then no quantities will be confirmed.
   ATP requirements, however, will still be passed to planning. This is an
   example of a user requirement to determine if the confirmed quantities
   should be set to zero or not. A user requirement would run after the
   system requirement '1' for confirmed ATP quantities.   The sample
   requirement '101' adds the additional requirement that confirmed
   quantities should be set to zero if the credit block is set.
Best Regards,
venkataswamy.y
Edited by: yanamadala venkataswamy on Dec 8, 2008 10:25 AM

Static Credit Checks - Open orders - Confirmed quantity vs total quantity

We are using static credit checks. Credit currently only sees open orders with a confirmed quanitity.
Customer orders 10 items we have 5 in stock. Credit check runs, credit is evaluated basd on the confirmed open quanitity of 5. The order gets a credit block. Credit rep releases the order.
A few days later the balance of the order arrives in the warehouse. The remaining 5 are confirmed on the order. Since the confirmed quantity has been increased and subsequently the confirmed open value, the order goes back to credit.
We frequently encounter this situatuion and are looking for ways to reduce the number of credit round trips.
If we wanted to base the credit check on the total quantity / order value, as opposed to the confirmed quantity / value what do we need to change.
Insights are appreciated.
Edited by: tooCann on May 14, 2008 2:30 PM
Edited by: tooCann on May 14, 2008 2:31 PM

Hi cann
As you are going with static credit checks, system will check the order and if it exceeds it will throw an message (error , warning )
Now again , if you create another sales order , that value will not be taken into consideration , system again will check for the credit limit amount
For example :
credit limit - 10000
sales orders - 1010, 1011
1010 sales order value - 11000
1011 sales order value - 10500
Now when you create a sales order system will check the credit limit 10000. and once you save it and create another sales order (1011), again system will check for the same credit limit 10000.
The credit limit gets reset once the order is saved ,in static check
Now any open quantities are there means and when it gets confirmed then system will check for those open quantity also
To minimize all these use dynamic credit check
Regards
Srinath

Sales order confirmed quantity

Dear all
There is a requirement by which when user creates the sales order, the confirmed qty must not exceed the available material stock quantity.
e.q if sales order qty is 100 and material stock (MMBE) is 70 then confirmed quantity in sales order sch line tab must be 70 , not 100.
What setting are required to make in configuration to achieve that.
Pls reply ASAP
Deepak Mehmi

Dear Deepak,
          Did you check the settings given above reply. In OVZJ-checking rule= A
As I understood your requirement:-
M1 - stock= 75 Ea
Order:-
M1- 100 Ea
Schedule lines ( as per current system settings): - (C = Delivery proposal)
Confirmed date -         Order qtty - Conf. qtty
line 1 -req delivery date -        100 - 75
line 2 -future date(proppsed)   0    - 25
Schedule lines ( as per current system settings): - (B = Full Delivery)
Confirmed date -         Order qtty - Conf. qtty
line 1 -req delivery date -        100 - 0
line 2 -future date(proppsed)   0    - 100
Your requirement: ( One - Time delivery)
Confirmed date -         Order qtty - Conf. qtty
line 1 -req delivery date -        100 - 75
if is this you are looking for, then the above setting will resolve.
Regards,
Reazuddin MD

How to Restrict Confirmed Quantity in Sales Order (Based on Batch Expiry)

Dear SD Experts,
Currently our sales order confirms any amount of quantity if stock is available. And only during delivery it checks for the expiration of the batch and reduces the delivery quantity to batches available in stock within expiry.
But since we are doing a bulk creation of deliveries at the end of the day, the check for expired batches is happening too late and no visibility for the data entry operators of stock that cannot be delivered during creation of the sales orders.
So I am looking for solution to restrict the confirmed quantity in sales order to actually confirm only stock what can be delivered. i.e. based on expiry of the batch.
Thanks!

hi
in Logistic general - batch mangement - batch determination allocation and check activation - maintain allocate SD search Procedure/ activate check
check this for your sales area and sales document type and then in the search procedure maitain the strategy to check the Expiration date.
regards,
Sudhir

Changing the Confirmed Quantity in Sales Order

Hi Gurus,
I have a requirement to change the confirmed quantity of the line item of the sales order. Is there any FM or BAPI that I can use? And how?
Thanks,
Andre

Hello,
I am having to deal with a similar issue.
The allocated quantity needs to be reset, so that the quantities can be allocated again according to the checking rule for product allocation.
This is probably not clear anymore, I am also totally confused now, so I'll add an example.
Example:
SCENARIO 1: Rejected item quantity not available to earlier order:
Assume product ABC is on a monthly allocation plan at a channel level
Available units = 100 units
Allocation plan = 50 units for Channel1, 50 units for Channel2
Assume all orders in this scenario are for one channel
1.     Order 1 is entered
Qty of 40     confirmed from ATP check, confirmed from allocation check
RESULT: allocation of 40 units is consumed, available allocation = 10 units
2.     Order 2 is entered
Qty of 20     confirmed from ATP check, confirmed for 10 units from allocation check
Remaining 10 units unconfirmed
RESULT: allocation of 10 is consumed, available Allocation = 0 units
Unconfirmed order quantity = 10 units
3.     Order 1is rejected
line item for Qty 40 is rejected
RESULT: available allocation = 40 units
4.     Order 3 is entered
Qty of 40     confirmed from ATP check, confirmed from allocation check
Allocation of 40 is consumed
RESULT: allocation of 40 is consumed, available allocation = 0
5.     Rescheduling is run for this product (order creation date determines priority in the queue)
EXPECTED RESULT:
Order 2 has highest priority and would be committed for 20 units, leaving 30 units for Order 3
Order 3 Commit quantity 30, unconfirmed quantity 10
Order 1 Line item was rejected, (no committed quantity)
RESULT:
Order 2 - Commit quantity 10, unconfirmed = 10 (as available allocation 0)
Order 3 - Commit quantity 40
Order 1 - Line item was rejected
So I need to reset the allocated quantities first...
Were you able to find a solution for this?

Cancel Confirmed Quantity in Sales Order Item (VA02)

Dear All,
I am having the following scenario :
Customer have created a Sales Order, item 10, schedule line 1 with quantity 120. The delivery date is 2011.12.22.
They have confirmed the quantity using the "Check Item Availability" function.
They have then changed the delivery date from 2011.12.22 to 2011.12.23. The problem arises that in the "Availability Overview", the system still show the confirmed quantity is on 2011.12.22. It doesn't release the confirmed quantity after we have changed the delivery date. And what is worst is the system is prompting me that no stock is available on 2011.12.23.
Does anybody knows how to release the confirmed quantity in the schedule line. I have tried in VA02 by modifying the schedule line details..... but does not work..
Thanks.

Hello,
One easiest way is to reject the line item and add a new line, make the delivery date as 23rd. Once you reject the line item the confirmed schedule line get reversed.
You can try with CO09 also.
Regards,
SAM

Confirmed Quantity for Item in sales order

Dear All,
In one sales order there is confirmation block (this is through the delivery block in the sales order header level).
The sales order contains BOM (header and it's sub items) and some standard items also two third party items.
When the sales order is saved there are no confirmed quantity for any of the item except the BOM header.
May I know what could be the reason to have this BOM header confirmed quantity..??? this is leading to a problem in the data from sales order.
Is there any customizing related to this item (item category or schedule line category) to look out for..??
Thanks & Regards,
Vishi...

hello, friend.
your issue is quite broad. outcome depends on -
1. configuration of delivery block (which, in your case, we can assume to include confirmation block)
2. selection of availability check and MRP type in material master
3. schedule line category and schedule line determination
now in standard, if the order line item category is TAN, and MRP type is PD and availability check is PD... the system might temporarily confirm the item even when putting a delivery block at header level, but the system should delete confirmed quantities when you save the order. you can check the confirmed quantities when you open the sales order in change mode... the confirmation should be zero.
however, in third party items (item category TAS), these items are normally confirmed even in change mode. this may hold true if either MRP = none (e.g. ND) and/or if availability check is KP (no check).
nevertheless, regardless of confirmation quantity, the system should not allow creating of delivery while delivery block is in place.
please try these scenarios and post your feedback.
regards.
jy

Static Credit check at Sales Order for confirmed quantity only.

Dear All,
I am facing two problems and would really appreciate if you could give some inputs on it.
If a SO is of 100 tons and the confirmed quantity is 10 tons then the credit check is happening for the value of confirmed quantity only as per the requirement.
1. But after releasing the SO using VKM3 I have to carry availability check again in the sales order as the confirmed quantity is becoming zero. Pls tell me how to control this, the confirmed qty should not change.
2. If I increase the confirmed quantity to more than 10 still the system is allowing me to create the delivery without blocking for credit check again as I had released the SO credit for value of 10 tons goods only .
Regards,
Abhilash

HI,
1) T-code OV27- You have not maintained confimation block here.
2) T-code OVA8- Select the credit settings and double click it.You get Display View "View for maintenance of automatic credit control" .
Maintain the deviation in "released documents still unchecked" section.
Thanks,
Vrajesh
Edited by: Vrajesh Nayak on Jul 24, 2008 5:28 AM
Edited by: Vrajesh Nayak on Jul 24, 2008 5:35 AM

How to control not to confirm quantity in sales order schedule line

Hi,
We have a problem with confirmed quantity in sales order schedule line.
When I reject a position in a sales order, confirmed quantity still remains with quantity ( diferent to 0).
I need in some cases that system not to confirm quantity in schedule line at item level.
I've tried to do this with a new routine in OVB8 transaction, but it didn't work.
Could you help me? How can I avoid the system to confirm quantity in a sales order item?
Thanks in advance....

Hi Lakshmipathi,
I'm sorry. The rejection was a bad example.
I need, in some cases, that the system doesn't confirm quantity in sales orden item. We have a custom field in sales order item and we need to confirm with 0 quantity , when that field has a specific value.
Due to that field is a custom field, I need an exit, or rutine, or .. i don't know...to inform a standard field too ( delivery block, rejection...) something to get confirmed quantity to 0.
I've tried with rutine in OVB8. But It didn`t work
I've tried with delivery block, but with this all items in sales order, confirms with 0. I need at item level.
Thanks

Standard report show the confirmed quantity in sales order

Hello
i'd like to know t-code for report show the confirmed quantity and the remaining quantity of sales order
For example : i create sales order with quantity (1000) and the quantity of material in storage location 600 , so i want report display the confirmed quantity ( 600) and the remaining quantity (400)
Thanks

Search the forum before posting. Check in VA05
G. Lakshmipathi

Confirmed quantity in the sales order coming as 3.5 ea

Hi Gurus
The confirmed quantity in the sales order coming as 3.5 ea where the order quantity was 10ea.I checked CUIN for EA the decimal places is given as 0 which is very much correct moreover I checked the material master in additional data I have not find anything abnormal.The order was created by a batch job.Please help.

Hai,
The system has concluded that 3.5 EA for the confirmed quantity means the remaining part of the stock are already allocated to some other sales orders.Out of 10 EA only 3.5 EA are in the stock.
You can view through the MD04 and then enter the plant ,material and then check the quantity that are allocated to the various orders.
Please revert for any.
Kalyan

It still shows confirmed quantity at sales order in case of no stock

Hi,
I have the availability check configuration, but my requirement for 0 confirmed quantities at sales order in case of no stock is not working. That is- It still shows confirmed quantity at sales order in case of no stock. Please suggest.
All the setting for availability check is done. I have set the accumulation as 3 in checking group. But still not working.
Thanks
Mauryan

Dear Mauryan,
ATP check will work if you have already turned on ATP check in the following 3 transactions:
OVZ2
OVZG
OVZ8
You need to turn on ATP at your checking group, requirement class, and schedule line category. If one of them is off, then ATP check will not work. See note 547512, Q1.
Claire

Return/Replacement Confirmation quantity is exceeding order quantity

Similar Messages

Maybe you are looking for