Return to Page 1 of an Article Upon Article Swiping?
I have a client request that I'm pretty sure is not doable but figured I would ask:
Let's say I have an article with 20 pages and I swipe down to say, Page 8. If I then swipe right, I am on another article. Now, if I swipe left to go back to the previous article, it remains of the same page I was on before, Page 8.
Is there a way to have it return to Page 1 if I were to swipe back to that article?
Thank you.
No, there isn't.
Neil
Similar Messages
-
How do I change the spacing before or after a hard return in Pages 5.5.2? I am working on an academic article and need to specify paragraph formatting (OS X Yosemite 10.10.2)
Hi Michele,
Select the paragraphs where you want to change the spacing.
Format Panel > Text > Spacing
You can change 1.0 - Single to something else, or type a number in Before or After.
Regards,
Ian. -
How can i make a soft return with pages shift enter does not work!
how can i make a soft return with pages shift plus enter does not work!!
On full keyboards with a numeric keypad, the key above the right shift is "return" & the one on the numeric section is "enter." On a Mac (or Apple IIgs ) they do have separate functions. On the "mini" keyboards, both names are on the same key, but "enter" is written in smaller letters. I'll have to check to see how that works on another Mac later today.
-
How can I print only one or two pages, not the whole article?
I just want to print one page not the whole article. There is no provision for what pages to print.
I don't know where they are in Word but the print dialog is standard throughout OSX and this seems logical enough.
The only problem is the Paper Handling is hidden under Layout. But sort of makes sense.
Peter -
"returning error page for JRun too busy or out of memory"
Hello,
I've got some trouble to update a ColdFusion linux based.
We have already tried to update from ASPB11-04 and ASPB11-14 but we always have the folloing erreor message :
"returning error page for JRun too busy or out of memory"
We really need a solution ASAP. Thanks!
JeffCan you share the exception and application logs having the error entries.
Regards,
Anit Kumar -
Soft returns in Pages for iPad
I would really like to create a space between numbered items in Pages but I can't figure out how to do it. Does anyone know how to create a soft return in Pages for iPad?
I have seen responses for the desktop application but not the iPad application.Pages 1.7.1, IOS 5.1.1
You start a bullet item and then press both ⇧ and return keypad keys to force a newline. This turns off the bullet style. Press return. Use the paintbrush toolbar icon to reselect the Bullet paragraph style again. This approach shows the inelegant possibility.
The best approach would be at the end of your bullet text, change your line spacing from 1.0 to 1.25 from within the paintbrush > Layout tab. A return continues your bullet style. If your normal body text has been 1.0 line spacing, you can switch back to that after your list. -
Creating a soft return in Pages for iPad
I would really like to create a space between numbered items in Pages but I can't figure out how to do it. Does anyone know how to create a soft return in Pages for iPad.
daisybrain2663 wrote:
Why isn't that in the help topics for Pages? Frustrating.
I guess that we could ask that question about a few different things Apple related.
I'm glad that you got the hang of it. -
Return PDF page number from the name of the link in InDesign CS4 JS
Hi, I need to return pdf page number of the linked file in InDesign.Here what I have so far, but my FilePath comes back undefined, and I am not sure if pageNmuber line would work:
var myArtBack = app.activeDocument.pages[1].rectangles[0].graphics[0];
var myArtBackName = myArtBack.itemLink.name;
var myBackFilePath = myArtBackName.filePath;
var myPageNumber = myBackFilePath.PDFAttribute.pageNumber;
Your help is highly appreciated.
YuliaYour first problem is:
var myBackFilePath = myArtBackName.filePath;
That should be:
var myBackFilePath = myArtBack.itemLink.filePath;
What you should have done is something like:
var myLink = myArtBack.itemLink;
var myPageNumber = myLink.parent.pdfAttributes.pageNumber;
Maybe you need the file path for some other purpose, but that's not the route to information about the PDF graphic (the parent of the link) which has the pdfAttributes property -- property names always start with a lowercase letter.
Dave -
Getserver cookie - returns empty page
Hi,
I am using MVC,
I have firstpage - a controller for that and a model class.
I have second page - a controller for that and the model is the same as the first one.
I am using a single model class but multiple controllers and multiple views. I am trying to use server cookies to set and get attributes between the pages.
First Page - I have 2 attributes - on Do_init - I instantiate Model. Do_request - loads the firstpage. Do_handle-data - once the data is entered in firstpage, gets it from form fields and loads it into cookie.
Do_handle_event - gets the values from the cookie and processes it and makes a table to be passed to the seconf page. I loaded this table in the cookie and - call second.do
Second page - in controller - DOInit - i have again instantiated Model - in Dorequest - I try to read from the cookie for the table data...But I am getting an empty page. I debugged it and in the Do request - where I call the get_server_cookie - nothing happens, just returns empty page...
Does anyone know why?? can I not access the cookie by name in more than once controllers??
Is this a right way of navigating between pages?? I want all the objects in the pages accessible across all the pages...should be able to read and write as per events...please suggest...
Thanks
ThilothamaHi,
Put that cookie in the navigation->set_parameter and paas it to the next page in the page attributes as an 'AUTO'.
Hope this may help you.
Jyoti -
Google image search in ipad - returns blank page, what's wrong?
while searching, under image tab, returns blank page.
what's wrong?Works fine for me. Probably a google problem.
-
0 result returned for query "collection ('exampledata.dbxml')/article
I using BDB XML I create a container called Exampledata.dbxml using java API. using a separate program I put my sigmodRecord.xml file into the container. I then wrote another program (see the program below) to test my Query
where Query = "collection ('Exampledata.dbxml')/article" but dont know why i always have
0 result returned for query "collection ('exampledata.dbxml')/article if the program is run. Pls can anybody help me?
package xmldbdemo;
import com.sleepycat.db.Environment;
import com.sleepycat.dbxml.*;
import dbxml.gettingStarted.myDbEnv;
import java.io.File;
public class simpleQuery3 {
public static void main (String[] args) throws Throwable {
String theContainer = "Exampledata.dbxml";
File path2DbEnv = new File("c:/myJavaProgs/examplesEnvironment");
if (path2DbEnv == null || ! path2DbEnv.isDirectory()) {
System.out.println("Bad file name");
System.exit( -1 );
myDbEnv env = null;
XmlContainer openedContainer = null;
env = new myDbEnv(path2DbEnv);
Environment enviro = env.getEnvironment();
// create xmlmanager
XmlManagerConfig myManagerConf = new XmlManagerConfig();
myManagerConf.setAdoptEnvironment(true);
myManagerConf.setAllowExternalAccess(true);
XmlManager myManager = new XmlManager (enviro, myManagerConf);
// XmlManager myManager = new XmlManager();
XmlContainerConfig myContainerConf = new XmlContainerConfig();
XmlContainer myContainer = myManager.openContainer( theContainer, myContainerConf);
XmlQueryContext myContext = myManager.createQueryContext();
String myQuery = "collection('Exampledata.dbxml')/article";
XmlResults myResults = myManager.query(myQuery, myContext, null);
XmlValue myValue = myResults.next();
while (myValue != null){
XmlDocument myDocument = myValue.asDocument();
String name = myDocument.getName();
System.out.println(name);Hi,
The BDB forum is located here : Berkeley DB Family -
Updating UCCX Application returns blank page
Hi,
We have IPCC Express 4.5, when adding new application or updating existing apps, it returns blank page. Before, it will work again when we restart the server but now, it just won't work. Is there a known bug for this one? CAn anyone of you help me? We have upcoming scripts to develop and we cannot do any thing to apply it. Thanks in advance.
LenHi
I would check the c:\program files\wfavvid\log\MADM logs for any major EXCEPTIONS (search for them in Caps, and try to make sense of what they are telling you
If you don't have any luck with that, it's possible to delete the appadmin website from Tomcat and it will rebuild the site when you next restart the Node Manager. Go into c:\program files\wfavvid\tomcat_appadmin\webapps, and delete the appadmin folder. There will also be an appadmin.war file there, don't delete that as it contains the compressed website files. When you restart the node, it will be rebuilt and may be fixed.
Regards
Aaron
Please rate helpful posts.... -
PHANTOM web page loads on startup. Upon startup, an unwanted web page loads up.
PHANTOM web page loads on startup. Upon startup, an unwanted web page loads up. My preferred web page "A" is still shown on the settings under -Tool-Options-General, home page address is correct and home button works correctly.
Some file somewhere is forcing this page upon startup. I would like some ideas where to look.
I have run various utilities such as AVG, Tweaknow, and spybot s&d newest version.
Its just annoying to have to look at Yahoo Brazil upon startup
A few months back, someone suggested some reset setting in Firefox, boy what a mistake, took a long time to get things back the way I like them, and it didn't work.
I see this in the troubleshooting info ???
"browser.startup.homepage_override.mstone": "19.0",
"browser.startup.homepage_override.buildID": "20130215130331",The prefs that you posted are normal for a Firefox version (in this case Firefox 19.0.
Please update to the current Firefox 22.0 release.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version.
*https://support.mozilla.org/kb/Updating+Firefox
The Firefox 19 version that you currently run is no longer supported with security updates.
*It is important to update Firefox and add-ons to the latest version to get all security fixes.
Try to use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved -
J_security_check returns blanc page.
Hello All,
My login page, using j_security_check, returns blanc page when connecting to the Linux box, however there is no problem at all when
connecting my sun box.
Both, sun and linux boxes have same tomcat and jsdk versions and I use same PC.
Do you know what is the problem?
Thanks.That's correct.
You are specifying a login page, which will ONLY be accessed when the user attempts to view a secured resource.
After logging in, they will see the page they were originally trying to get to.
They will only be forced to go to the login page if you secure the page they are trying to get to:
<security-constraint>
<web-resource-collection>
<web-resource-name>Resources</web-resource-name>
<description>Require users to authenticate</description>
<url-pattern>/upload/filelist.jsf</url-pattern>
</web-resource-collection>
<auth-constraint>
<description>Define who can access this url-pattern</description>
<role-name>NTSB Users</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<realm-name>dot-ad</realm-name>
<form-login-config>
<form-login-page>/login.jsp</form-login-page>
<form-error-page>/loginError.jsp</form-error-page>
</form-login-config>
</login-config>
<security-role>
<description>This role can access the edit</description>
<role-name>NTSB Users</role-name>
</security-role> -
Apex Listener return blank pages with no configuration errors!
- I set up an Apex Listener "Version:1.1.3.243.11.40" at "10.0.114.11" in standalone mode.
- I configured Apex Listener via http://10.0.114.11:8585/apex/listenerConfigure and return with no errors.
- I get http://10.0.114.11:8585/apex/listenerStatus, it returned this:
Current Time: Tue Dec 13 17:06:32 ICT 2011
Server Uptime: 0 Days 01:10:14.101
Total Accesses: 38.0
Total Traffic: 161.34K
Total Errors: 0
Total File Downloads: 0
Total Processing Time: 0 Days 00:00:09.354
Processing Time in milliseconds: Minimum: 20 Average: 246 Median: 64 Maximum: 3062
Database Time in milliseconds: Minimum: 14 Average: 61 Median: 50 Maximum: 204
Active Requests: 0
Connections in the pool apex:
Active: 0 Available: 1
But when I go to "http://10.0.114.11:8585/apex" or "http://10.0.114.11:8585/apex/apex_admin", I got blank pages.
The page displays "Application Express Login" or "Application Express Administration Services" in the tab at the top of IE, but nothing else. Anyone have any ideas what could be happening here ?
thanks so much,Hi Udo!
I run apex_listener with this below command and the output is that:
java -Dapex.home=/tmp/apex -Dapex.images=/tmp/apex/apex/images -Dapex.port=8585 -Dapex.erase -jar /source_install/apex_listener.1.1.3.243.11.40/apex.war
INFO: Starting: /source_install/apex_listener.1.1.3.243.11.40/apex.war
See: 'java -jar apex.war --help' for full range of configuration options
INFO: Extracting to: /tmp/apex
INFO: Using classpath: file:/tmp/apex/apex/____embedded/start.jar:file:/tmp/apex/apex/WEB-INF/lib/poi-3.6-20091214.jar:file:/tmp/apex/apex/WEB-INF/lib/commons-fileupload-1.2.1.jar:file:/tmp/apex/apex/WEB-INF/lib/je-4.0.103.jar:file:/tmp/apex/apex/WEB-INF/lib/apex.jar:file:/tmp/apex/apex/WEB-INF/lib/ojmisc.jar:file:/tmp/apex/apex/WEB-INF/lib/ucp.jar:file:/tmp/apex/apex/WEB-INF/lib/xdb-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/xmlparserv2-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/ojdbc6.jar:
INFO: Starting Embedded Web Container in: /tmp/apex
Dec 13, 2011 6:40:22 PM ____bootstrap.Deployer deploy
INFO: Will deploy application path=/tmp/apex/apex/WEB-INF/web.xml
Dec 13, 2011 6:40:22 PM ____bootstrap.Deployer deploy
INFO: deployed application path=/tmp/apex/apex/WEB-INF/web.xml
Using config file: /tmp/apex/apex-config.xml
-- listing properties --
PropertyCheckInterval=60
ValidateConnection=true
MinLimit=1
MaxLimit=10
InitialLimit=3
AbandonedConnectionTimeout=900
MaxStatementsLimit=10
InactivityTimeout=1800
MaxConnectionReuseCount=1000
APEX Listener version : 1.1.3.243.11.40
APEX Listener server info: Grizzly/1.9.18-o
Dec 13, 2011 6:40:23 PM com.sun.grizzly.Controller logVersion
INFO: Starting Grizzly Framework 1.9.18-o - Tue Dec 13 18:40:23 ICT 2011
INFO: http://localhost:8585/apex started.
Using JDBC driver: Oracle JDBC driver version: 11.2.0.2.0
I don't know how to "could you please check if you configured the directory for the static contents ("images") correctly"
because the Installation Guide of Oracle about Install Apex in standalone mode do not tell me to configure images any more. I just run apex listener with above command "java -Dapex.home=/tmp/apex -Dapex.images=/tmp/apex/apex/images -Dapex.port=8585 -Dapex.erase -jar /source_install/apex_listener.1.1.3.243.11.40/apex.war".
Thank you for your reply,Udo!
Maybe you are looking for
-
Hello Okay to start my iMac here is connected directly to a DSL modem with no router through Ethernet. I saw that you can share Ethernet connections and use AirPort to create a Computer-to-Computer network and enable internet connection sharing. Woul
-
Strange "tang" noise that seems to come from nowere very annoying anyone know whats the source
strange "tang" noise that seems to come from nowere very annoying anyone know whats the source
-
Where do I find a list of error meanings for Apple Hardware Test?
I think My 27" mid 2011 iMac has a faulty thermostat on the ODD. I ran the Apple Hardware Test and the error message was 4M0T/4/40000002:ODD-0. Where can I learn what this error code actually means?
-
IPod touch 2.2.1 version upgrade?
I have an iPod touch 16 GB version 2.2.1 that a friend recently gave me. Most of the apps seem to work only on the more recent versions. Is there any way to update the firmware to more recent version?
-
To whom it concerned. Good morning, I'm Bohyeon Kim from South Korea. I've been really appreciating your company's CC service which is like super excellent. But, for a couple of days lately, i've been having this problem like shown above. Whenever I