Return to song after quitting

Is there a way to have iTunes return to the last played song after you have quit?
If I am in the middle of an album and quit iTunes, upon return to the program it starts at the top of my huge playlist.
I can scroll thought the list or search for the ablum but It would be alot easier if I could just continue were I left off.
I do like the new album, interface but its not the same.
Thanks in advance

Hi Bob.
From the MAIN MENU, click on NOW PLAYING.
Cheers!
-Bryan

Similar Messages

ITunes 7 automatically relaunches after quit.

I have the same problem on both my intel mac mini and my MacBook Pro. The problem is worse on my mini as iTunes can hardly stay closed for 30 seconds and usually will relaunch immediately after quitting. The MacBook Pro tends to wait about 3-5 minutes after I quit to decide and launch iTunes - especially when I'm trying to play a game or anything else full screen, this is extremely annoying as it takes the full screen item, puts it in a window, and forces the machine's focus to iTunes.
Any idea what might be causing this? I thought it might be autolaunching from detecting a fake ipod, but I unplugged my ipod and both machines kept launching iTunes. I even unplugged the USB cable from the computer to see if that might help, but no matter what I try, the problem still persists and iTunes has already launched twice in the time that I have written this.
Any suggestions would be much appreciated.

iTunes related Widgets can cause these problems.
Disable them and see if this helps.
Other users reported they could enable them again, without the problem returning.
hope this helps.
M

Clementine 100 percent CPU use after quit

after i quit clementine, pause it or stop playback get 100 percent cpu. any ideas ?
when i start clementine from console this is what i get, the second part is after i hit the pause button
Couldn't load icon "clementine-panel"
Couldn't load icon "clementine-panel-grey"
Application asked to unregister timer 0x5b00000a which is not registered in this thread. Fix application.
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::translate: Painter not active
QPainter::save: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::restore: Unbalanced save/restore
QPainter::translate: Painter not active
QPainter::end: Painter not active, aborted

I only get 100% CPU after quitting. There's a bug report here.
Seems to be something to-do with the nvidia drivers.
Play, Stop, Pause etc. seem to work fine and I don't get any QPainter errors so you've
got some other problems there.

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig?

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig? IPConfig /flushdns doesn't help at all. Until they fix it I will be previewing and buying my songs thru Amazon.

Doublechecking ... do you still get that if you update to iTunes 10.6.3.25 (just released today)?
http://www.apple.com/itunes/download/

Premiere Pro crashes after quit - Mac OSX Lion

Greetings,
Symptoms:
I'm experiencing a consistent crash behavior after quiting Premiere Pro (ver 5.5.1 and 5.5.2). The complexity of the project doesn't seem to matter and once it crashes, i get the prompt indicating the app encountered a serious error and will try to save the project. I then get the usual crash report prompt to send to apple followed by the adobe crash report a few minutes later (must be why i see "dynamiclinkmanager" in top for a bit after PP crashes).
If I reopen PP, I'm prompted with a dialog box asking if I want the last project opened. If I say yes, I'm back to a crash before any assets load (unexpected serious error and the app will need to close) followed by the crash reports again for apple and adobe. Basically, i get one chance to make a project and it goes bad when closing the application.
I'm using an install from a DVD, but had also tried the web version. I was able to create a couple projects with the web version (trial) and then when I got the DVD, i believe i used that for updating/authenticating, etc - maybe that's where things went south (anyone else observe a similar pattern?). I didn't think too much of mixing the DVD content with the web install, so the steps around how i mixed those two sources is somewhat fuzzy.
For reference, i'm pasting the crash report inline. To reproduce, I just had to open PP, click no when asked to open the last project that unexpectedly quit, and then just hit quit and got the crash. I didn't do anything other than accept the project defaults in order to test out hitting command-Q.
If I can provide futher info to help with a repro, please let me know.
Any help is appreciated and thanks in advance,
Todd
<<begin crash report>>
Process:         Adobe Premiere Pro CS5.5 [280]
Path:            /Volumes/VOLUME/*/Adobe Premiere Pro CS5.5.app/Contents/MacOS/Adobe Premiere Pro CS5.5
Identifier:      com.adobe.AdobePremierePro
Version:         5.5.2 (5.5.2)
Code Type:       X86-64 (Native)
Parent Process: launchd [126]
Date/Time:       2011-12-08 21:42:17.998 -0800
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
objc[280]: garbage collection is OFF
terminate called without an active exception
abort() called
Message was edited by: Jeff Bellune. Edited for brevity.

Thanks for reply zikade, here's my rig:
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          6-Core Intel Xeon
Processor Speed:          2.66 GHz
Number of Processors:          2
Total Number of Cores:          12
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          12 MB
Memory:          64 GB
ATI Radeon HD 5770:
Chipset Model:          ATI Radeon HD 5770
Type:          GPU
VRAM (Total):          1024 MB
Regarding en/disabling the mercury engine, is there another place to toggle that? I didn't think i had any other choice at this time with my card option (until i get a nvidia cuda card). FWIW, When creating a new project, the options in the drop down menu for "Video Rendering and Playback" is greyed out with "Mercury Playback Engine Software Only" as the selected option.
I was also thinking of putting a fresh Lion install on another disk (bah, would prefer to not have to do this since I have other stuff all nice and set up on current OS install), but at this point I'm fine to take the hit and level the playing field w/ a fresh OS, image that for downstream testing if a fresh install is needed again, and then start installing things one at a time until something goes wrong.
It seems (i hope) this error could be caused by something pretty basic as it is a complete showstopper. Unless somehow what I'm doing is super unique, there would be other folks out there dead in the water, to, but making waves.

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

You're welcome.
Going back to your original post:
5) Tried running Itunes in 'safe mode', running itunes as an administrator..nothing.
Was that iTunes' safe mode as opposed to Windows' safe mode? iTunes safe mode is invoked by holding down CTRL+SHIFT immediately after clicking the icon to launch iTunes and continuing to hold until this message pops up:
Click continue, then close iTunes and reopen. With luck iTunes now opens normally every time.
tt2

After updating to iOS 6.1.5 on my iPod Touch 4th Gen, Some of my songs are skipping to the next song after 30 seconds of play...

After updating to iOS 6.1.5 on my iPod Touch 4th Gen, some of my songs are skipping to the next song after 30 seconds even though the iPod appears to be playing the current song. Some of my songs are mp3 files that have been playing fine for years...
Anybody else experiencing this issue?
I'm using the latest version of iTunes and i don't have that problem on my PC. The only difference as far as i can tell is the updated iOS & firmware...
AJ

Yes, other have. If the songs play OK in iTunes on the computer
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How much $$$ will Verizon charge me if I don't return the Fascinate after receiving replacement?

How much $$$ will Verizon charge me if I don't return the Fascinate after receiving replacement?
I spoke with customer service and couldn't get a real number. She just said it "could be up to $500, or more"
to be determined after they don't receive it within the 5-day period.
Is there a way to find out for sure how much it's going to cost?
Thanks!
Here's the reason I'm asking:
I forgot to drop it off at FedEx on the way to the airport. My entire family is now on an overseas trip and won't
be back for 8 weeks. The Fascinate, packed in Verizon box with FedEx box, is now sitting in my car trunk at
the airport long-term parking lot. I was supposed to stop by the FedEx office at the airport cargo area to drop
it off, but forgot about it during the rush.... (yes, I do realize it's a stupid mistake that may end up costing a
lot of money)

Hi and good morning!
I would like to review your account with you and ensure I can help resolve any concerns you have about being charged for this device. Please PM me directly so we can discuss this together. Also, include your name and mobile number with your PM to me.
Thank you so much and have a safe overseas trip!

Sales Return from Customer after 180 days

Hi,
I have a requirement on sales return, if the return is done after 180 days, government does not allow to adjust the respective tax amount relating to that return goods.
For example:/sales invoice:
Customer Dr 110
Tax Cr 10
Sales Cr 100
In case of return this entry will reversed (if it is partial partial amount will be reversed).
Requirement:
If the return is happened after 180 days, tax reverse can not be accepted.
In this case what is the scenario.
1. Is this tax amount goes to Tax expnese account (Dr P/L account)
2. Is this tax amount added to Material Stock value
Please update me which more details.
Thanks
Partha

Hi,
Perhaps Note 34526 - Delivery free of charge and value-added tax will suggest you a solution. You must handle it with a VOFM in the pricing procedure.
I hope this helps you
Regards,
Eduardo

All the time I plug my iPod Shuffle to my iTunes it says it needs to be restore and after I restored it and add music it only skips song after song without playing one completely. What should I do?

All the time plug my iPod Shuffle to my iTunes it says it needs to be restore, and after I restored it and add music, it skips song after song without playing one completely. What should I do?

Hello there, san blasted.
The following page links to the iPod Troubleshooting Assistants. Feel free to review the recommendations for your particular iPod:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I try to redeem an iTunes GC and I get a "Session Has Timed Out" Message. The same thing happens when I try to download a song, after I'm taken to the SLA page

I try to redeem an iTunes GC and I get a "Session Has Timed Out" Message. The same thing happens when I try to download a song, after I'm taken to the SLA page. I sent Apple Support an email. They told me its software on my computer restricting access to my Internet Connection, but I haven't installed any new software since my last purchase from the iTunes Store. What can I do to fix this?!?! Thanks

Delete and redownload them if doing so is free in your country.
(106637)

Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

This looks like a change of behaviour in iTunes 12. Once songs are queued up to the Up Next list then they play whether ticked or not. If you want to skip certain songs already queued click the Up Next tool, then click the small X to the left of the song that appears when you hover over it.
tt2

TS1412 My iPod shuffle periodically skips across multiple songs...playing a song or two and then jumping forward or back multiple songs after playing only moments of a song. Please tell me what I can do to fix this. Thanks

My iPod shuffle periodically skips across multiple songs...playing a song or two in full and then jumping forward or back multiple songs after playing only moments of a song. Please tell me what I can do to fix this situation. Thank you very much.

This is in regards to a 4th gen 40gb clickwheel ipod.
Hi, i've also been having a very similar problem with my ipod as well. I find that regardless of which windows-based pc i use (either my xp laptop @ home, or my win2000 desktop @ work) windows and itunes refuses to recognise my ipod. In windows explorer it will show it as a removable drive, but if i click on it, windows freezes. If I try to disconnect it, I cant because windows keeps reporting that 'the device is being used, try disconnecting later' and so then i shut down my laptop to disconnect it safely.
Lately, like you, i've also noticed that clicking sound it makes. It happens when i connect my ipod to my computer - like the drive inside it is constantly restarting or something, and i get it when i'm playing / charging it in my dock. I've also noticed that when it's playing whilst charging, it just freezes on a song, then skips a couple of songs.
I've just discovered the disgnostic tools on my ipod, so i think i'll run a couple of tests (ie HDD scan) and depending on the outcome, i'll go visit the apple store.

Ipod wont show songs after updating.

Hi there, I have a Ipod 30gig Video. I have just done the 1.2.2 update on it. I am running windows 2000. The only way I can get my songs back and lists, is to plug it into my mac laptop, then Eject it. It seems as Itunes does not support windows 2000 no longer (no further downloads for win 2000)I cannot view my songs after ejecting it. I am not very happy and would not have updated the Ipod firmware if I knew this was going to happen.
Can I reverse my firmware with an older one somehow? What shall I do?

I am having the same problem!!!! have you resolved this issue yet? I see noone has replied with an answer its really frustrating. I have a friend at work who plugs it into this ipod thing he has sorry i don't know the name of it. He plugged it in to try to back up my music but didn't have enough space so when he disconnected it i was able to listen to my music again! when i plugged it back into my computer at home and at work all the songs disappeared again when I disconnected it!! I don't get it!! He suggest's I delete all my songs after I back it up of course and start from scratch! I don't want to do that 'cause it will take forever to get all my stuff back on. There has to be a better way! and APPLE should have warnings before they just throw out updates!!!

Silence in songs after sync

Hi
Sometimes I have some bad songs after sync on my ipod touch , these songs have silence of 10s in the middle and then after all is correct
If I listen the song on my library ITUNES it's correct ( no silence ) and if I transfer again the song after delete it it's also correct
Any idea ?
Thanks
Chris

I see this problem too, as have others here on the Discussion Forums.
There have been other posts about this and as far as I can tell, it's a bug. I've never seen a fix for this.
Please tell Apple and hopefully if enough people do so, they'll address it in a future iPod/iTunes update.
iPod Feedback.
iTunes Feedback.

Return to song after quitting

Similar Messages

Maybe you are looking for