Return to Vendor 161 with outbound delivery

Hello
I have a problem when trying to return stock to a vendor.  I have created a return PO and checked the Return to vendor flag.
I have changed a delivery type to pick up movement type 161
The delivery is created and picking up the correct movement but when i try to post goods issue I receive the message below.
I know i could create a new movement type to create the update control but I would have thought that this was standard functionality... Am I doing something wrong?
Thanks
Sue
Update control of movement type is incorrect (entry 161 X X _ L)
Message no. M7226
Diagnosis
The system could not find entry 161 X X _ L in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
·     For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
·     For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

Hello Ravi,
I know the entries are not there for Movement Cat L but I don't want them to be, I want to use the standard Return to Vendor which should use B = Delivery but for some reason it is choosing L!
I am think I will use a different movement type as standard 161 does appear to be working correctly.
Thank you for all your help.
Kind regards
Sue

Similar Messages

  • Vendor subcontracting with outbound delivery without reference

    Hi Experts,
    please do you know if it is possible to manage subcontracting movement (541) using an Outbound Delivery without reference to any Sales Order nor Purchase Order?
    Can you send me please the detailed description of settings in master data and customizing?
    Thank you very much
    Kind Regards
    Andrea
    Edited by: Andrea on Jul 21, 2008 12:46 PM

    Hi,
    With ME2O, it's necessary to have a subcontracting PO in selection for your materials. From this selection, you have the requirement and the vendor stock for these materials.
    If the stock is negative, you can create a outbound delivery.
    For your information, this outbound delivery is as a delivery without reference. But, with ME2O, it's necessary to have PO in selection.
    Then, another solution is to update vendor stock with MB1B but not connection with LE.
    But, i tried to add item category LBN for LO delivery type.
    But, i have a error message during the GI (message M7 071).
    I'm not on real test environment.
    Can you try ?
    Regards,
    Lionel

  • Returns to vendor PO with delivery..

    Dear All,
    When we process a return to vendor PO via ME21N , we selects the returns item box tick (Say company code - NZ01)
    Once the warehouse have confirmed the stock has been despatched we have to then create a outbound delivery via VL10B and then go into change outbound VL02N and pick/post goods issue to despatch the stock in SAP.
    But when we use another company code (Say UK01),we do not need to create an outbound delivery we just go into MIGO and post goods receipt the stock and as movement type is 161 it despatches the stock off the system. Is there any reason why first company code are unable to do this, when we tried to do it this way SAP advised the order contained no selectable items?
    Is it due to delivery parameters are linked to the document type?
    Please reply
    Amit

    Hi,
    This depends on the Return PO Documnet Type and Plant from where materials have been returned. Just check in option SPRO > Materials Management > Purchasing > Purchase Order > Returns Order > Returns to Vendor - Here check the Delivery Type "RL" assigned to the combination of PO Doc Type and Supplying Plant.

  • How Goods Issu happens in the Stock transfer process with outbound delivery

    Hi,
    Can you please explain me how the goods issue happens in the Stock transfer scenario with outbound delivery?
    can we use VL02n for goods issue for single delivery doc(Delivery type-RL).
    Can we use the transaction VL23 for collective processing of goods issue for stock transfers.
    Thanks

    Hi Anil,
    ->You can use VL02N transaction to do PGI for the outbound delivery in the Stock transfer scenario.
    -->But you have mentioned that delivery type is RL -is this returns delivery
    Normally NL delivery will be used in STO(Rplenishment
    delivery)
    -->You can use VL06G transaction for collective PGI
        The transaction VL23 for delivery schdule in the back ground
    I hope it will help you,
    Regards,
    Murali.

  • Vendor partners in Outbound delivery

    Hi Gurus,
    Where can i check the vendor partners in outbound delivery which was created with reference to inter STO PO.
    I hope my question is clear.
    Kindly give reply
    Regards,
    prasad

    Thanks Rajesh for quick reply.
    I did the same earlier but if delivery block is available in ECC and material is stage on hold area. and now after some time i need to dispatch same delivery, but now i am not able to remove delivery block from ECC, Beacouse Vl02N does not work after delivery distributed in EWM so how can i do PGI for the same .

  • Tried...different message with outbound delivery

    When i create an outbound delivery for two line items...10 and 20...line item 10 is delivered...but...with line 20, gives this error message...please clarify step wise, as i am new working at the client place
    Error message
    line item 20:
    "Delivery spilt becuase of different shipping points."

    Dear raghu ram
    Apart from the suggestion what sudeep gave, for information, A shipping point can be determined for each order item. How the shipping point is determined depends on three factors:
    => The shipping conditions from the customer master record (Shipping screen)
          For example, it might have been agreed with the customer that the goods are to be delivered as soon as possible.
    => The loading group from the material master record (Sales/Plant Data screen)
         You could, for example, specify a loading group that defines that the goods must always be loaded with a crane or a forklift.
    => The delivering plant
         This plant is determined per order item either from the customer master record or from the material master record. However, you can also enter it manually for each order item.
    thanks
    G. Lakshmipathi

  • Return to Vendor with 161

    Dear,
    I want to configure Return to Vendor process with 161.
    Can any body guide me What r Configuration to be done for this??
    Regards
    Biswajit

    Hi,
    My knowledge,there is no Configuration for 161 Movement type.
    If you want to return the material u can process throgh 2 ways one is 122 and 161.
    In 161 Movement type,First Creat Return Purchase order.This is not different from other PO,U just click Return after Free Items,Save the document and Do GR.
    In MIGO Header 101 Movement type and in Item Details system automaticall taking 161 movement type.(Goods reciept w.r.t Return PO),Post the document and Do Invoice.
    All Accounting Entry is Reversed when comparing to Normal.
    Raghu

  • Difference between outbound delivery against vendor and GI to vendor

    Hi all
    I was going through one scnerio,in which the good were being return to the vendor by creating outbound delivery using VL10b,with reference to PO.
    what is the difference when we issue the goods by using MIRO instead of creating outbound delivery.
    As in both of the cases stock is getting less and it is being send to vendor .
    Thanks
    sid

    Same same here, please post it into the GTS Forum:
    SAP Global Trade Services (GTS)
    Best,
    Frank

  • Return to vendor Error - Document flow for delivery cannot be updated

    Hi Expert,
    we have a issue - can't post "return to vedor"  by MIGO.
    The steps are following:
    1. It is an STO between 2 plant within different company code;
        But the planner wrongly set this STO as CONFIRMATION KEY REQUIRED.
    2. The issuing plant didn't create the outbound delivery for this STO. And at the same time, the receiving plant directly post the Good Receipt for this STO by creating an inbound delivery.
    3. Then we found this error, we decided to reverse this Good receipt, and then ask the issuing plant to open an outbound delivery, and the receiving plant post good receipt for the outbound delivery.
    We met error when we tried to use 122 - return to vendor:
    Document flow for delivery cannot be updated
    Message no. M7352
    Diagnosis
    Purchase order 753486 is assigned to a delivery. The current transaction cannot update the document flow for this delivery, because the system does not recognize the delivery number.
    System response
    When you post this goods movement, the document flow is not updated in the delivery. This can lead to problems later on when you process the delivery.
    Procedure
    You can post the goods movement using transactions MB0A or MIGO (Goods receipt for a delivery) after you enter the delivery number.
    If you are currently posting a cancellation, a return delivery, or a subsequent delivery for the material document, it is not possible to enter the delivery number.
    Procedure for System Administration
    See SAP note 361014: Message M7 352: What does it mean?
    Please advice,
    Thanks,

    Unfortunately, when I use MB0A and I input the delivery number under Find POs for Preceeding Document, it errors out as well as the delivery does not exist.
    Any other option to reverse the GR?

  • Open production orders and outbound delivery after go-live

    Hello All,
    I tried to search answer for this question but could not find answer.
    Could anybody suggest, what to do with open production orders and outbound delivery after go-live when WM is activated. As, after go-live WM-PP interface will be activated and system should consume material from storage bin specified in control cycle and that will happen for newly created production order after go-live,but what about existing production orders how to update production supply area against work center in production order.
    Similarly with outbound delivery how to update WM status after go-live.
    Thanks in advance

    Thanks to both Jurgen and Sander
    Regarding production order yes, one way is to re-read PP master data in production orders, but is that the only way to handle this or do we have any other option?
    I was aware of re-read PP master data but it will real time consuming and also if it will problematic for already released or partially confirmed production orders.

  • MIGO : How to identify post is for Goods Recipt of outbound delivery.

    Hi,
    I am working with MIGO Transaction,
    My requirement is that while posting the Goods recipt with outbound delivery, If Movement type is not eqaul to 861, display a msg to change movemnet type to 861.
    for this requirement I am using the BADI
    MB_DOCUMENT_BADI - >  MB_DOCUMENT_BEFORE_UPDATE  .
    My Querry is that How can I Identify that the posting is for Goods reciept with outbound delivery.
    thr r three importing parameter for the BADI
    MSEG
    MKPK
    & vm07m.
    I try mkpf-tcode2 field.
    but for both  goods recipt and cancellation , the value of this field is MIGO_GR.
    Please help me regarding identification of the same.

    Hi,
      Goods Receipt normally gets stored in MKPF & MSEG tables..
    Regards
    Kiran Sure

  • Return to vendor through RCV open interface

    Hi,
    I would like to return to vendor items with serial numbers through RCV open interface. Is it possible?
    We are using 11.5.7.
    Thanks in advance,
    Merav

    you can activate action box at following path:
    SPRO --> QM --> quality notification --> notification processing. --> Additional notification function --> Define action box.
    i hope this would help you.
    Thanks!!!

  • Disable auto Pick confirmation for EK00 output - Outbound Delivery

    Hello experts,
    Need help with Outbound Delivery Picking output typ EK00, I have setup the output type to be triggered automatically upon Delivery creation, It's printing the pick List as desired, But the problem is it's also confirming the Pick quantity automatically. Is there a way to set up this output to just print the PickList and not confirm the Pick Qty ?
    Thanks for your help.
    Kris T

    Hello Kris,
    If you want to deactivate automatic picking confirmation, you have remove condition type WMTA which results in automatic confirmation of picking.
    Go to NACE
    Application V2
    Here output type/ Condition record  WMTA needs to be removed.
    Also you have reconfigure movement type settings.
    SPRO>>LOGISTICS EXECUTION>>WAREHOUSE MANAGEMENT>>ACTIVITIES>>TRANSFERS>>DEFINE MOVEMENT TYPES
    Execute.
    select combination of warehouse number and movement type
    ands reset the automatic TO indicator to keep it 'BLANK' in background processing Tab.
    With this settings maintained you can stop picking status to 'C' automatically when delivery is cerated.
    Br,
    Tushar

  • Delivery type determination in case of returns to vendor without return PO

    Hello Gurus,
    When we create Return PO, and when we want to created delivery for this PO , we assign delivery type RL to the PO in SPRO.
    Now when I return the material thorugh MIGO (without return PO) with delivery check box active, system determines different delivery type than RL. My question is that where do we assign this delivery type and how the system determines this delivery type in case of returns to vendor without return PO.
    Thanks
    Pravin

    Control parameters at movement type level determine the delivery type created. I guess you are using MvT 161. Try configuring delivery category for MvT 161 in OMJJ.
    Hope this helps.
    Rajiv..

  • Creating outbound delivery with reference to inbound delivery

    Dear all,
    My requirement is as follows:
    I get an inbound delivery from my vendor for the our sales orders. (For n number of sales orders having same shipping point, shipto party ad sold to party, we get one inbound delivery) As of now we are using that inbound delivery and read data from LIPK and LIPS and using 'BAPI_DELIVERYPROCESSING_EXEC' to create outbound delivery.
    But, it is creating one delivery each for every sales order. What we require is to create only one outbound delivery.
    I have searched in forums and tried to use VL10A, VL10C but since the delivery dates of each order are different I cant use those transactions.
    Now I have two options:
    1) Take inbound delivery as reference and create outbound delivery. Are there any FM's or BAPI's for this which will create 1 outbound for each inbound?
    2) Can we combine multiple sales orders into a single delivery when the delivery dates are different.
    Could you please help me.
    Thanks in advance,
    Aravind

    Hi Aravind,
    I am facing some issues while creating Outbound delivery using the BAPI 'BAPI_DELIVERYPROCESSING_EXEC'. I am getting the error message in return parameter as "No instance of object type OutboundDelivery has been created. External reference:"
    If you are successful in creating Outbound delivery, please suggest what may be the issue for this message. Iam passing the exact sales order no and item no., quantty and unit of quantity. Also manual creation of Delivery using VL01N is successful but using the BAPI it is unsuccessful. Please suggest with your valuable points on this.
    Regards,
    Vimala P

Maybe you are looking for

  • Is it possible to back up data if hard drive is crashing or has crashed

    My son's computer froze and I have tried to reboot while holding down the option key and by holding down Command + Option + R for an internet reboot. When I try to repair utilities from the internet, I cannot choose the hard drive; instead, my option

  • When try to open a pdf, getting error message, Ádobe Reader has stopped working

    Adobe Reader has stopped working A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available

  • Displaying Application Roles / Groups in OBIEE

    All, We followed this blog - http://www.rittmanmead.com/2010/10/obiee-11gr1-security-explained-working-with-the-default-security-configuration/ - to implement security in our reports in OBIEE. We created four AD groups and four corresponding Applicat

  • J6480 All-in-One doesn't print whole page

    I have a J6480 All-in-One and when I print envelopes it sometimes does not print the last part of the address.  For example Return Address Prints Fine City, State  ZIP                                                                             Jonath

  • Quicktime 7.0.3 AVI export problem

    I recently agreed to an automatic update of Quicktime, to 7.0.3.. After that my exports from FCP PAL to AVI was hit by major problems. Every other second or so a frame would freeze,and thereby making it unusable by my VideoToaster unit. After making