Returnable Material from Vendor

Hi,
We are planning to implement Returnable Material from Vendor.
The process we would like to follow is that we issue certain pallets to the vendor who would provide the RM's on the pallet. The pallets would be valuated on the Company code. We would like to track the number of pallets being issued to the vendor and also the number of pallets currently at the vendor at any point of time.
The following are my doubts:
1. How do we configure this process in SAP?
2. What are the Master Data changes that need to be done? (Vendor Master, Customer Master and Material Master)
3. How do we issue the Pallets to the vendor?
4. How do we GR the Pallets?
5. Should we treat the pallets as a special Material?
6. How to track the Pallets?
7. Can we implement WM for tracking pallets?(like can we use Storage Unit Management to track pallets)
8. If my RM stores is WM managed how do i capture the above information?
Please suggest.
Regards,
Srikanth

Hi,
Create Pallets material  as a material Type LEIH...
Now create PO for your RM's...
Do GRN for above PO ...In the GRN RM material will come in the GRN...Now you click on transport equipment button (last button) , just below the item grid table...
It will take 501 + M mvt...
Here you enter your pallet material and do the GRN.....check in MMBE, tracking will be done here...it wil show you the stock in sepearte line item...
Now return the pallet to the vendor by 502 + M mvt ....
Utsav
Edited by: Utsav.agra on Sep 29, 2009 9:14 AM

Similar Messages

  • Return Material to vendor

    Hi,
    here i procure material from vendor(excisable),But due to some reason i want to return certain qty to vendor with excise challan .How i proceed?

    1.) Returns to vendor will be created against the original purchase order using movement type 122 in MIGO transaction. This will have an exactly reverse effect to that of original goods receipt i.e. material stock will be reduced from the Inventory.
    2.)A material document & an accounting document will be created in the system.
    3.)If the material is excisable, then Excise Department will create an outgoing Excise Invoice with reference to this 122 material document. System will populate the excise duties automatically, based on what was captured during incoming goods receipt excise process.
    4.)If payment has been already been processed before the return of materials, FI Team will first need to create a Credit Note through MIRO transaction and then the return to vendor process will be executed. MIRO transaction is used for capturing/posting Invoices/Credit/Debit Notes etc.
    5.)Excise invoice will be printed and sent along with the delivery document.
    T code:
    Create Returns delivery u2013 MIGO
    Create Excise Invoice u2013 J1IS

  • Return material from cost center

    Dear All,
    Return material from cost center:- xx, Material:- yyy qty z Pc in inventory. create sales order for delivery.
    They are materiel in prototype in R&D for customer loan
    What is the Process that has to be follows in SAP for this can some explain.
    sapuser

    hi
    is it possible do more description
    regards
    R.T

  • TRANSFER OF MATERIAL FROM VENDOR TO VENDOR

    Hi *SAP MM GUYS*  Please check my scenario .
    I have send some material to a vendor for subcontracting jobbwork.
    after as he is delaying the work I want to send the material to another vendor.The first vendor has no problem with this.So how to transfer the material from vendor to vendor.Please give me detailed explanation.
    Awaiting your reply
    Veer

    Dear,
    Case1) Process flow IF material is Excisable:
    Do 542 of material
    Reconcile the challan with that dpcument
    Complete the challan
    Do 541 for second vendor
    Raise the s/c Challan
    Case 2) Process flow if material is non excisable
    Do 542 of material
    Do 541 to the second vendor
    OR u can do
    542 in MB1B wherein u can put the vendor where u want material to be sent.
    Regards,
    SNB

  • Procedure for return material from cost center

    Is there any other Movement Type to return material from Cost Center except Cancellation of Goods Issue ?

    Hi
    I think no option other than cancellation.
    You can try the the below scenario.
    Try to receive the material into GR blocked stock using 103 if you want to use the material release it by 105
    If you want to return then use movement type 124.
    Hope it helps
    Thanks/karthik

  • Transfer Material From Vendor to Vendor

    Please can anyone  explain material can transfere from vendor to vendor....Thank you ....Raveendra

    Hi,
    What do you mean exactly by transfer material from Vendor to Vendor?
    Are these your materials provided to Vendor?
    Or are you referring to Consignment?
    Anyway, please have a look below.
    1) Go to MIGO_TR t-code
    2) Set it to Transfer Posting A08, Other R10
    3) Use movement type 542 to transfer from Vendor to our warehouse in storage location
    4) Use movement type 541 to transfer from the receiving location in step 3 and transfer it to the new Vendor.

  • PR: Procurement w/o material from vendor with plant assignment not defined

    Hi,
    Getting the error message:  06806 - Procurement w/o material from vendor with plant assignment not defined
    while creating the PR with account assingment (P- project) & without material no. instead entering the short text in the PR.
    this issue (Error message) is getting to only one user.
    question-1:  Is it possible to set the Error messages to the user specific. Because other users are able to create the PR with the above inputs, but the one user is not able to create instead getting the above E- Msg.
    question-2: Is it possible to set the messages to Plant specific instead quesiton -1 or both
    Or else, please let me know how to deactivate the above E-msg to the specific user.
    Please do the needful asap.
    Regards,
    Sapsrin

    Hi,
    As you noticed, note 856962 has changed the system behaviour
    when you are working with procurement w/o material from vendor with
    plant assignment.
    Items without a material master record can only be ordered from vendors
    without a plant assignment.
    This note will stop your users from creating service purchase orders
    for a vendor who has a Plant assigned in the vendor master, issuing
    the error message 06 806.
    you can check the below code:-
    LMEPOF23
      IF ekpo-ematn IS INITIAL AND
          (  aktyp EQ hin OR ekko-reswk NE oekko-reswk  OR      "856962
         (  aktyp EQ hin OR NOT ekko-reswk IS INITIAL OR        "856962
            ekko-bsakz NE oekko-bsakz OR
            gf_extended_check NE space ).
        PERFORM enaco_2(sapfmmex) USING '06' '806'.
    regards,
    Lalita

  • Procurement w/o material from vendor with plant assignment not defined

    While creating  standard Framework Order (FO)   asset  PO  I am getting the below error
    "procurement w/o material from vendor with plant assignment not defined"
    Plz Help
    Regards

    Dear INDRANIL BHATTA ,
         Thanks for your reply and your soluation ,
    Finally , I found Vendor Master assignment to plant so it can't create FO PO .
    ->  XK02 -> selecting "purchasing data" >Extras>Add.Purchasing data.

  • Return material to vendor from blocked stock

    Hi!
    I am going to use blocked stock (s) to lock low quality material.
    How could I return it to vendor. Please give me document chain .
    We use WMS and document flow must include outbound delivery.
    Andrey Garsin.

    Hi! Thank you for answer
    Please provide more detals.
    I need to manage two return scenarios:
    1. stock was loaded into SAP system from  old (non sap system). no purchase order in the system.  stock was created with mvtye p 561.   
    2. Stock was recived from vendor using PO + inbound delivery + GR (101) . Now this stock need to be returned to vendor. 
    If you have a time please give me more detailed step (document flow and key steps inside document ) for both cases or link to help. I have found only this description http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm but it is too rough.
    Andrey

  • Vendor Consignment - Returned material from customer directly to consignmen

    Hi,
    I'm working with a consignment vendor process. I'd like to know how should I manage the return from my costumer. I'd like to move this returned material directly to my vendor consignment.
    Is it possible? How can I do it? How affects it to the consignment settlement?
    Points will be given
    Thanks in advance

    Hi Roger,
    We have 2 type of consignment process in SAP.
    1. Vendor consignment (MM process) & 2. Consignment with customer.(SD process)
    If the Customer is returning the item (or consignment item). ... it will be process as normal process...like goods receipt in to inspection ... if it is ok... then again we can move to Consignment ( with customer)...in seperate transaction.
    Hope this is clear.
    REgards
    Anand

  • Regarding rejection of material from vendor

    Hi All
    My scenario is like this
    My semi finished material is come from vendor after that i put that material on production after doing all process production done the GR for that material as finished goods. This material goes into quality and here I come to know that the material is rejecting because of vendor. But the GR is done on finished material code so I have to do the material to material transfer by movement type 309. And then reject the material on vendor coz Material code for vendor material is different and material code after production is different
    I want to ask is their any other process to map this scenario
    Regards
    Sachin

    Hi,
    Sorry for replying late.
    Pl. I am not worring about points. My only concern is I should share my knowledge and improve knowledge by following the others inputs.
    Whatever the quantity you have to reject against a particular vendor, can be enterered in the complaint quantity.
    You have to enter the FG material no., in which you are rejecting in the parent material field.
    In the child material field, you have to enter the material no. which you have recd. from the vendor (refer BOM)
    After that, you have to scrap the material by using T code QM10.
    Then for Return delivery process, pl. discuss with your MM counterpart and for Debit to supplier pl. involve FI/CO counterpart.
    My suggestion is that, First write down the Business Process Procedure for material defect found out during processing. i.e your current problem process.
    Madhava

  • Return material to vendor-CIN scenario

    Hi gurus,
    1.Can i know the steps for returning the material to vendor after doing MIRO.-CIN involved
    2.Returning the material to vendor after paying  the vendor-CIN involved.
    regards
    murugan

    Hello Murugan,
                                Awnser for 1) see as u wabt to return the material to vendor , so as u had already made a GR & posted J1iex , so first of all cancell the GRN document , then Cancell the J1iex , , Now make a return P.O for htis there is acondition that the material u want to return to vendor should lie in unrestricted stock , now as ur Return P.o is made , release it & then do GR with respect to this Returm P.O with mvmt. type = 161, as these material is being return to vendor then the outgoing tax invoice should also be prepared so to do this use T.code -> J1IS here use ref. docu type as MATD, Give  GR NO, series group , here all excise duties are to be filled manually & save the invoice note down the no. of invoice, After this U have to post the invoice through -->J1IV , Now to take print out of this outgoing tax invoice u have to make a customised t.code as we have made it was --> ZRETURN here u can have print out of this invoice .
    Now for 2nd Question ---> post credit memo to vendorby t.code ---> MIRO if already paid .
    Pl reward for efforts , i had already  gone through this case .
    sap11

  • Return Material To vendor- Delivery address

    Hi Friends,
    When i create a PO for return material to the vendor with return flag on item level, In the Delivery tab of item details, I found the delivery address is my plant address instead of Vendor address. is that correct, why it displays plant address ?.
    Is that because of Plant which i mentioned in the item level of PO?. How can i see vendor address in delivery tab?.
    Thanks

    Hi,
    Please do the following things in the system:
    That's right, you should create a customer master data with the supplier's name and address in the system, just like the normal customers;
    Assign the customer number to the vendor master data, go to "Control" view in the general data, you can find the field named "Customer", input the number you created;
    In addition, because the delivery note belongs to shipping process, you have to extend the material master data to sales views.
    After these, you can start your operation of return delivery note now.
    Good luck
    Tao

  • Release is cancelled , unable to return material to vendor

    HI All,
    We have a BPA, against this BPA we have many releases.
    For example We have a release 100.
    For this release 100
    Total Quantity for an item - 35000
    We have received 15000 (received,accepted & deliver)
    Also received 20000( now we want to return this to vendor. (After receiving only we want to return it)
    But after receiving 15000 & 20000, the release 100 has be cancelled.
    We are unable to return the material now.
    Is there any way to return the material when the release is cancelled for a particular BPA>
    Regards,
    SYR

    Cancel is irreversible action. There is no way to revert it back systematically. If the line is canceled, we cannot do any receipt transactions (receive / correct / return) on the shipment.
    So the next best option I can think of is
    Do a Miscellaneous Issue to reduce the onhand
    Post negative accounting journals if required.
    Communicate to the Payables indicating that they need not pay the items that are returned.

  • Return material to vendor procured through Third party PO

    Hi Friends
          We have a scenario where the materials sent to customers through third party sales order is retuned back as retuned stock.
    This retuned material needs to be sent back to the vendor. Please let us know how this can be handled.
    regards
    R.Rajesh

    Hi
    i have an issue on the way we manage return from third party order but maybe it can help you to know how we proceed
    third party order here is treated this way;
    sales order with TAS triggering PR and then PO......we do MIGO when good reach customer ..then MIRO and finally customer invoice..ok..nothing really extraordinary !!
    for the return we add a new item in the Sales order and then triggers a new PR..we go to our PO with ME22N and create a new item from the PR generated with the second sales order item
    We set the return checkbox in the second PO item...and then we do MIGO to indicate that stock has been returned to the supplier ..and create the MIRO to be refunded by the supplier and finally we create a G2S invoice to refund the customer ....
    it works good but...the overal status of the sales order remains "Being processed..." !! this is my problem and SAP do not want to help us coz a return flow on third party order is not covered by SAP in standard !
    Regards
    Laure imberti

Maybe you are looking for