Returning to a Presentation After Quitting

I am a college instructor. I often quit a particular Keynote presentation prior to completion. How do I then return to the same slide where I left off when I relaunch Keynote on a subsequent day? Presentations seems to open up randomly in the middle, that is I can't figure out what factors control where a particular presentation opens, when re-opened.

If you highlight the slide in the "slide viewer" window (left side of the screen) before you quit the presentation, Keynote should return you to that same slide when you reopen the presentation.

Similar Messages

Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?

Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

ITunes 7 automatically relaunches after quit.

I have the same problem on both my intel mac mini and my MacBook Pro. The problem is worse on my mini as iTunes can hardly stay closed for 30 seconds and usually will relaunch immediately after quitting. The MacBook Pro tends to wait about 3-5 minutes after I quit to decide and launch iTunes - especially when I'm trying to play a game or anything else full screen, this is extremely annoying as it takes the full screen item, puts it in a window, and forces the machine's focus to iTunes.
Any idea what might be causing this? I thought it might be autolaunching from detecting a fake ipod, but I unplugged my ipod and both machines kept launching iTunes. I even unplugged the USB cable from the computer to see if that might help, but no matter what I try, the problem still persists and iTunes has already launched twice in the time that I have written this.
Any suggestions would be much appreciated.

iTunes related Widgets can cause these problems.
Disable them and see if this helps.
Other users reported they could enable them again, without the problem returning.
hope this helps.
M

Clementine 100 percent CPU use after quit

after i quit clementine, pause it or stop playback get 100 percent cpu. any ideas ?
when i start clementine from console this is what i get, the second part is after i hit the pause button
Couldn't load icon "clementine-panel"
Couldn't load icon "clementine-panel-grey"
Application asked to unregister timer 0x5b00000a which is not registered in this thread. Fix application.
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::translate: Painter not active
QPainter::save: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::pen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::setPen: Painter not active
QPainter::restore: Unbalanced save/restore
QPainter::translate: Painter not active
QPainter::end: Painter not active, aborted

I only get 100% CPU after quitting. There's a bug report here.
Seems to be something to-do with the nvidia drivers.
Play, Stop, Pause etc. seem to work fine and I don't get any QPainter errors so you've
got some other problems there.

Status after quitting is failed rather than incomplete

I would like to get the LMS to report Complete/Incomplete if
the presentation is quit before quiz and Fail/Pass after the test.
Is this possible?
I have set the reporting to Complete/Incomplete and the
report data to "user access only", but the LMS reports the
presentation as Failed anyways if it is quit before the quiz (at
the end of the presentation). For some reason the core.score.raw is
set to 0 right after the first frame in the show, even though there
is no quiz or radiobuttons there...
When the quiz starts the cmi.core.score.raw values are set
quite correctly (and status to pass/fail), but why is it set to 0 /
fail before the quiz is even loaded?

The current release, 31.6, does retain the sidebar setting between restarts; the new behavior is only in TB 38 and above.

After quitting iphoto computer jams

Hi there,
After quitting iphoto, my computer jams and a blank blue screen appears. I have to hold down the power button to shut it down and then start up again.
Everything appears normal after that. Any ideas?
Thanks Sally

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or freeze, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search that archived log, and if necessary the older ones below it, for the same information.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Do the same with kernel.log.
Step 3
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

Can i return my macbook pro after 5 months

can i return my macbook pro after 5 months

If you bought it direct from Apple, you have 14 days to return it for a full refund or toward the purchase of a different model.
After that time, if it is broken it can be repaired. If it does not suit your needs and cannot be upgraded to suit your needs, you recourse is to convert it to CASH by selling it, and apply the cash toward a computer that better suits your needs.

Can I return my macbook air after two months?

Can I return my macbook air after two months?

where did you buy it from?
apple's return policy is 14 days

Is there a setting to return to the inbox after deleting/filing an open email?

Hi all,
I'm running iPhone 4s. Is there a setting to have the mail client return to the inbox after deleting/filing an open email? It currently just opens the next email.
Any help is greatly appreciated.
Thanks.

Hi,
You could try is to '''Disable''' the Foxit, Adobe and Office '''Plugins''' in '''Tools '''('''Alt '''+ '''T''') > '''Add-ons''' and use the normal Firefox Open with (when you click on a link) to browse/open it in the required application.
[https://support.mozilla.org/en-US/kb/Using%20plugins%20with%20Firefox Using plugins]

Premiere Pro crashes after quit - Mac OSX Lion

Greetings,
Symptoms:
I'm experiencing a consistent crash behavior after quiting Premiere Pro (ver 5.5.1 and 5.5.2). The complexity of the project doesn't seem to matter and once it crashes, i get the prompt indicating the app encountered a serious error and will try to save the project. I then get the usual crash report prompt to send to apple followed by the adobe crash report a few minutes later (must be why i see "dynamiclinkmanager" in top for a bit after PP crashes).
If I reopen PP, I'm prompted with a dialog box asking if I want the last project opened. If I say yes, I'm back to a crash before any assets load (unexpected serious error and the app will need to close) followed by the crash reports again for apple and adobe. Basically, i get one chance to make a project and it goes bad when closing the application.
I'm using an install from a DVD, but had also tried the web version. I was able to create a couple projects with the web version (trial) and then when I got the DVD, i believe i used that for updating/authenticating, etc - maybe that's where things went south (anyone else observe a similar pattern?). I didn't think too much of mixing the DVD content with the web install, so the steps around how i mixed those two sources is somewhat fuzzy.
For reference, i'm pasting the crash report inline. To reproduce, I just had to open PP, click no when asked to open the last project that unexpectedly quit, and then just hit quit and got the crash. I didn't do anything other than accept the project defaults in order to test out hitting command-Q.
If I can provide futher info to help with a repro, please let me know.
Any help is appreciated and thanks in advance,
Todd
<<begin crash report>>
Process:         Adobe Premiere Pro CS5.5 [280]
Path:            /Volumes/VOLUME/*/Adobe Premiere Pro CS5.5.app/Contents/MacOS/Adobe Premiere Pro CS5.5
Identifier:      com.adobe.AdobePremierePro
Version:         5.5.2 (5.5.2)
Code Type:       X86-64 (Native)
Parent Process: launchd [126]
Date/Time:       2011-12-08 21:42:17.998 -0800
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
objc[280]: garbage collection is OFF
terminate called without an active exception
abort() called
Message was edited by: Jeff Bellune. Edited for brevity.

Thanks for reply zikade, here's my rig:
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          6-Core Intel Xeon
Processor Speed:          2.66 GHz
Number of Processors:          2
Total Number of Cores:          12
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          12 MB
Memory:          64 GB
ATI Radeon HD 5770:
Chipset Model:          ATI Radeon HD 5770
Type:          GPU
VRAM (Total):          1024 MB
Regarding en/disabling the mercury engine, is there another place to toggle that? I didn't think i had any other choice at this time with my card option (until i get a nvidia cuda card). FWIW, When creating a new project, the options in the drop down menu for "Video Rendering and Playback" is greyed out with "Mercury Playback Engine Software Only" as the selected option.
I was also thinking of putting a fresh Lion install on another disk (bah, would prefer to not have to do this since I have other stuff all nice and set up on current OS install), but at this point I'm fine to take the hit and level the playing field w/ a fresh OS, image that for downstream testing if a fresh install is needed again, and then start installing things one at a time until something goes wrong.
It seems (i hope) this error could be caused by something pretty basic as it is a complete showstopper. Unless somehow what I'm doing is super unique, there would be other folks out there dead in the water, to, but making waves.

T.Code for issues return by the user after month closing

Dear SAPient's,
Give us the transaction facility available in SAP to account the issues
return by the user after month closing.
regards,
Bijay Jha

Dear SAPient's,
Actually I want to know that when the Goods Issued and from that some goods are returned back due to any reason.
I want to know Is there any T.Code from which i can get full details of Goods which is returned after Issuing in one month.
Warm Regards,
Bijay Kumar Jha

How to return a html repsonse after form guide rendering in browser?

How to return a html repsonse after form guide rendering in browser indicating that server has recieved transmission and request is submitted succesfuly?
I am rendering the form guide in browser using guide invoke service and when i submit the data in browser to server through guide , it is displaying some random number in browser?
i need to display a resposne that request is submitted successfully?

how could i define a variable with "html data" ?
Create a variable of type document and then a service to read the html from where ever it's located. If you put it in LiveCycle, you can use the ReadRessource service. If it's on the file system, you can use the Read Document. If it's in the database, you can use the JDBC service.
Also, one more doubt where should i use this variable in my process to get the same?
You want the response once you've submitted the data, so the html is really the result of calling the process that's processing the data. So I would create an output variable of type document on that process.
Right now it displays a random number in the browser because your submit process is long lived. When a process is long lived (asynchronous), you invoke it and then you get an identifier back. It's kind of a fire and forget. You can use that identifier to check the status of the long lived process, since long lived processes can take hours, days to complete. You don't want your browser to wait that long, hence the identifier.
However if you change the process to be short lived (synchronous), the browser will wait for the result of the process, which really means the output variables for that process. If your output variable contains html, it'll display html.
So the key is make you submit process short lived and populate the output variables appropriately.
Jasmin

I updated my ipad from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over again

I updated my ipad 2from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over again

iCloud: Restore or set up your iOS device from iCloud
Or from iTunes http://www.iphonefaq.org/archives/971992

How to i get my screen to return to normal size after accidentally zooming it in

How do I get my screen to return to normal size after accidentally zooming in

Pinch it, or double tap.

How do I return to my inbox after following a link

I have an iPhone 4s with OS7.1.2. I would like to know how to return to my inbox after viewing a link in an email. Right now the only way I can get back to the inbox is to close out the link without having to close and then reopen my email program. I use Gmail.

You're welcome! It's still a little awkward but I think it's the best way

Returning to a Presentation After Quitting

Similar Messages

Maybe you are looking for