Returning to Quality Hold Stock

Dear All
We have a requirement that in returning of Finished goods,It should go directly in Quality Hold Stock rather in goods return stock.
In my view,1.first I need to change the movement type 655 as Quality Inspection in Schedule Line Category of Return document type,then It should go in storage location of Quality Inspection Stock,then through UD it will go to storage location of Finished goods.
2.Second I need to activate Quality Management View in Material Master.Plz tell me what kind of setting is required here.
PLz guide me so that I can map the scenario.
Any Efforts will be highly appreciated.
Many Thanks
Rakesh Naveen

Answered

Similar Messages

  • Returns sale order stock from returns to quality error

    Dear All,
    For FG Material we have activated Inspection Type '06' - Returns from Customer Inspection and Inspection Plan with Usage 'Goods Issue 06' also created.
    We create return sale order material comes in returns and we need Inspection lot with '06'. so in MB1B using mvt type 457 trying to move stocks from returns to quality but system is not allowing to transfer stock it gives error Change Inspection stock in QM only.
    kindly give your suggestion for this error.
    Regards,
    sakthivel

    For FG Material we have activated Inspection Type '06' - Returns from Customer Inspection and Inspection Plan with Usage 'Goods Issue 06' also created.
    SAP has returns set up to create 06 inspection lots. These are not stock relevant. In this case the inventory goes into the return stock category and another move must be done to move the material to unrestricted or blocked as needed it will not allow to move to QI
    If the material should go into QI stock and be under QI control, then config must be changed to use the 05 inspection type instead of 06.
    We create return sale order material comes in returns and we need Inspection lot with '06'. so in MB1B using mvt type 457 trying to move stocks from returns to quality but system is not allowing to transfer stock it gives error Change Inspection stock in QM only.
    In SPRO SD schedule line category for returns(DN) change movement type to 655 and make relevant settings for QM movement types.
    Check below relevant thread for more information
    sales return
    Cheers
    KK

  • Return posting to quality inspection stock

    Hi QM Gurus!
           How can i post from unrestricted to quality insp stock? I am trying to use movement type 322(quality insp to unrestricted-reversal) and an error message says "Change the inspection stock of material 1101 in QM only".
    When i activated the inspection type 08 (stock transfer inspection), the movement type 322 works. However, when i do transfer posting from one storage location to another, an inspection lot is created.
    So my problem is, how do i allow posting from unrestricted to quality insp stock and no inspection lots are created when i transfer the material from one storage location to another???
    I would appreciate if anyone could help me.
    Regards,
    Heinrick Palad

    hi heinrick
    you can reverse the stock positing providing following prerequisite have been meet,
    A usage decision has been made for the inspection lot.
    The goods in the inspection lot have been posted from inspection stock to blocked stock or unrestricted-use stock.
    If you posted the goods to a stock other than blocked stock or unrestricted-use stock (for example, to scrap), you must first post the stock back to blocked stock before you can reverse the original stock posting.
    Reversing Stock Postings
    Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
    The initial screen for creating a goods receipt for a purchase order appears.
    In the field for the movement type, enter 102 (goods receipt for a purchase order into warehouse - reversal).
    In the field for the purchase order, enter the purchase order number for the original goods receipt.
    You can copy the purchase order number from the inspection lot.
    Choose Enter to display the selection screen for the purchase order items.
    Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
    Save the goods receipt and exit the Materials Management component.
    Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
    The initial screen for changing a usage decision appears.
    Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
    To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.  
    regards
    thyagarajan

  • Sto stock to Quality Inspection stock

    Hi,
    I want Sto stock to Quality Inspection stock.Then i want Quality Inspection stock to production purpes
    I want return stock to Quality Inspection stock.then Quality Inspection stock to normal stock

    HI,
    For the material to go into quality stk,in the puchasing view of material master for the receiving plant tick the post to inspection  stk & save.
    Then do the STO the material will come automatically into quality stk.
    Even if u dont tick in material master still u can receive the matl in QI stk when doing migo by selcting the QI stk.
    After receiving the matl u can move it by using tcode MB1B & mvmt type321 to Unrestricted use.
    IN SAP only the unrestricted can be issued to production.
    Edited by: Murugan mgl on Aug 13, 2009 8:15 AM
    Edited by: Murugan mgl on Aug 13, 2009 8:16 AM

  • Adding Quality blocked stock in to warehouse stock

    Hi All
    I cannot find a way of adding Quality Restricted stock in to our warehouse in one movement.
    Normally we use MB1A mvt 222 to add returned unused stock in to the warehouse with reference to a WBS. Then we use MB1B mvt 322 or 344 to quality restrict or block the stock.
    I now have a need to return the stock in to the warehouse and quality restrict or block at the same time. I do not want to return the materials as unrestricted stock and then quality restrict/block them.
    Any help would be greatly appreciated
    Thanks in advance
    Darren

    You can achieve this with creating "scope of planning" in OM0E or special procurement keys
    [MRP multi plants|http://help.sap.com/saphelp_46c/helpdata/en/f4/7d2d4d44af11d182b40000e829fbfe/content.htm]

  • Storage location extension for Blocked and Quality inspection stocks

    Hi All,
    Could any one explain how to extend a Storage location (which is actually maintained for the Returns) to make use for the Blocked and Quality inspection stocks. Does this require any config settings.
    Thanks in advance.
    Kalyan

    Hi,
    Thanks for the Reply.
    Let me be more clear,in describing my requirement. Actually the present Storage location is maintained for only Returns. But in addition to this I require to make use of this storage location for the purpose of the maintianing Blocked Stock or QI stock.
    Therfore to achieve above what are necessary steps or do i need to maintain any config settings for this.
    Thank You,
    Kalyan.

  • Unable to create Vendor return delivery from blocked stock

    Hello,
    Would like to know how to enable delivery picking from blocked stock.
    Some back ground : I am using Delivery type RL (Vendor returns). Required config is done in IMG.
    In our process we move defective material to blocked stock. Next create a Return PO to pick material from blocked stock.
    Next use VL10b to create delivery document against this PO.  We are able to create delivery & PGI from blocked stock.
    All above steps are executing seamlessly without any issue In our QA system.
    However in PROduction system delivery document does not find any qty in blocked stock inspite of being in the blocked stock.
    Please let me know where I could find the setting to enable delivery shipping/ PGI from blocked stock.
    Look forward to some good responses.
    Thanks,
    Ram

    Prerequisites
    When you enter a return delivery, you should reference the purchase order or the material document, so that the system can:
    Suggest data to simplify data input (for example, the storage location)
    Check that the returned quantity does not exceed the delivered quantity
    Reduce the quantity delivered to date
    Reverse other updates that occurred (for example, for a goods receipt into consumption) when the goods receipt was entered
    Before you enter a return delivery with reference to a purchase order, you have to determine whether the goods were posted to stock or to consumption, or whether they were posted into goods receipt blocked stock. If you posted the goods to a particular stock type at goods receipt (for example, quality inspection stock), you have to return them from the same stock type.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63351643a211d189410000e829fbbd/frameset.htm

  • Goods return without quality inspection

    Dear Friends ,
    I wants to do material return without quality inspection , is it possible , how can we do this.
    Regards,
    Mahesh.

    Hi Mahesh,
    In SAP Business One, there is no quality inspection for goods return. You need to post on a proper forum to get the answer.
    Thanks,
    Gordon

  • Quality inspection stock

    Hi experts ,
    Whenever a material is procured from a particular vendor then at the time of posting goods receipt that material by default to be posted in Quality inspection stock alone not in Unrestricted use stock,i.e. posting in unrestricted use stock should not be allowed at all . If the vendor going to differ means then it can be posted in Unrestricted us stock .
    Kindly help me how to do this.
    - Neo

    Hello Neo,
    There are two options in this case,
    1. If using QM module, then as suggested by Srinivas, you need to maintain QM info record for the vendor which are subject to Quality material.
    2. If you are no using QM module then you need to flag mark "Post to Inspection Stock" check box in purchasing view of material master. But in this case, the material will be posted as QI stock for all the vendor, however you can change it during PO and GR.
    Hope this helps.
    Regards
    Arif Mansuri

  • SD delivery goods issue of Quality inspection stock

    Hello, anyone know whether SAP allow goods issue of quality inspection stock?
    If stanrdard customizing not possible, any user exit ?

    Hi
    No sap not allows GI for QI stock
    Beacuse Once Stock in QI without inspection we can't issue goods
    Hope ths helps
    Please reward points
    Sunil

  • Delivery  is accepting material in Blocked & quality inspection stock

    Hi Experts,
    During delivery ( VL01N) the system asks for Serial Nos for the delivered Material and serial Nos are assigned by going to Extras--> serial Nos. and PGI is completed
    In this process the system could able to take the serial Nos that are in Blocked (07)or Quality (02) state also apart from the Unrestricted Use.
    How can we restrict the system to prevent selecting the stock/material apart apart from 01 state ( i.e unrestricted use)
    Regds
    Rajiv

    You have customize that availability check which runs behind delivery to check what are the stock available.
    You have to make sure u unchecked the quality inspection stock and blocked stock
    thanks

  • Change stock from unresticted stock to quality inspection stock

    Hi,
         I have a material with Qualtiy View.we have done G.R. & also made UD & now my material lying in unresticted Stock.but now i want to cancle the G.R..
    What is the procedure to change stock from unresticted stock to quality inspection stock through quality module.
    Regards
    Pavan

    Hi
    user Exit QEVA0008  in SMOD you can check the documentation.
    Module for Editing Customer Function Code
    This user exit allows you to activate a function key in the menu for the
    usage decision.
    You can freely define the description and function associated with this
    function key (+FC1).
    You can use this feature, for example, to revoke (reset) the usage
    decision.
    Refer to the documentation for function module EXIT_SAPMQEVA_008.
    Functionality
    This function module is called if the freely defined function (+FC1) in the menu for the usage decision transactions is called up. A prerequisite for this is the activation of the user exit QEVA0008.
    Example
    Using this function module, you can reset the usage decision in transactions QA12 ("Change usage decision with history") and QA14 ("Change usage decision without history").
    Include LXQEVF10 contains sample coding for resetting the usage decision.
    Notes
    Business transaction QM68 is available for this function in the standard system. You can display a where-used list for this transaction in transaction BS33 (Display transactions).
    If business transaction QM68 was carried out successfully, the system sets the inspection lot status "UDRE" - usage decision reset (system status I0297). You can display a where-used list for this status in transaction BS23 (Display system statuses).
    If you want to use the function to reset the usage decision, be sure to consider the following points:
    If a vendor is released (status profile in the quality info record), an update is carried out only once; this means that if the usage decision is reset, the status in the supply relationship is not corrected.
    If you make the usage decision again, the inspection results will also be transferred to the batch classification.
    The quality level is updated only once (when you make the initial usage decision). If the usage decision is changed, the quality level is not updated.
    Regards
    Sujit

  • Unrestrected use stock to quality inspection stock

    Hi,
    plz tell me how can transfer Unrestrected use stock to quality inspection stock for same material and same palnt

    Hi Prasad, Make sure that inspection type 08 is assigned and activated in Material Master's QM view. Then you would be able to move the stock from unrestricted to quality using MB1B (Mvt/Type 322).
    Also check : Stock Reversal - From Unrestricted to Quality
    Edited by: m_n_novice on Sep 5, 2009 2:02 PM

  • Set PO item of one vendor deliver to quality inspection stock ?

    Hi Experts,
    I would like to know is there any posibillity to add some information on vendor master or PIR or something else , so that the related PO item will be set to quality inspeiction stock automatically ?
    here, we won't to set QM indicator in material master, as those materials will not be checked normally, only for the new vendor, we expected the inspction check for one specific period.
    BR , shubin

    Purhcase order Item level delivery tab you can select stock type as quality inspection. So that whenever you do GRN it will go to quality stock.
    While doing GRN, where tab manually you can select quality. That time also it will go to qulaity stock.

  • Returns from vendor special stock O

    Hi, all.
    Does anyone know, how can I make a returns from vendor, special stock O?
    Thanks in advance.
    HAL

    Hi, Vivek.
    I can not do MB04, because I don´t know always de PO that originates the stock "O" and this movement creates a FI document, with isn´t correct, because the 541O (that puts stock in vendor)   does not create a FI document.
    Any other idea? I mus say that I have WM, so I need to create an transfer order to store that sock in my warehouse.
    HAL

Maybe you are looking for

  • How to write an applescript and ignore errors

    I'm writing an applescript that uses a shell command that will always return an error. Applescript stops as soon as the error occurs. I want the applescript to continue running. How should I tell Applescript to ignore errors?

  • Business area not Flowing for GL

    Dear Guru's As per Our Client Requirment We Have activated Document Splitting And New GL Concept Based On Business Area  (Plant and Division) Concept In FB03 We are Able to See Entry View and General Ledger View with respect to  Business Area. Howeve

  • Export PSD file / open in Photoshop elements?

    I have created a folder of image files in Photoshop CS4 that I would like to share with a friend. I have a Mac, and the friend has a PC with Photoshop Elements. Can the native PSD files be opened in Elements? thanks

  • Olympus OMD EM-5 Mark IIraw files not supported?

    I just bought an Olympus OMD EM-5 Mark II, a brand new version of the EM-5.  I can't import raw files from the camera into Lightroom.  I see a message saying that the raw format is not supported.  There was no such problem with the earlier version of

  • How do I transfer photos or videos from my Droid to my computer?

    How do I transfer photos or videos from my Droid to my computer?