Returns and replacement

Hi Gurus,
Kindly provide the information about the customer returns and replacement in respect of under warranty cases
Eg
Final product sold is gear box (based on BOM). If we received the gearbox from customer for repair we have to replace some parts of the gearbox and send back to the customer (Note: gearbox is under warranty). In these case how to account the return gearbox and how to account the replaced parts and how to send back to the customer.
Regards
Allen

Hi Pepe,
I suspect something might be a problem with Item Usage. So we need to check 2 things.
1) Create a return order/ return request item directly in ECC and check the item usage that is getting picked.
2) In CRM also create a return order / return request item and check the item usage. you can put a break point on select statment "SELECT SINGLE * FROM crmc_it_assign" in CRM_ORDER_IT_ASSIGN_SELECT_CB FM.
I suspect the problem with item usage as transaction type and item cat group can not change (assuming materail and product are in sync)
Let me know the outcome. Hope this helps.Regds,
Raghu

Similar Messages

Yesterday I've bought the old mac book air, will Apple accept a return and replace it with the new one?

Yesterday I've bought the old mac book air, will Apple accept a return and replace it with the new one?

Hi micjhal,
Call them up! If you look on your receipt it'll indicate you have 14-days to return it (if bought at a retail store) and 30-days if bought through the online store.

Returns and replacements!

I bought a Nokia N86 a week last monday and the camera capture button was unresponsive. I called Customer care and was told to send the phone back using a label that they provided.
1. How long does it take for returned goods to be received and a replacement device despatched? Note that I was told I would get an email from Nokia once the device was accepted, but since it was posted monday, I have not heard a thing (it is thursday now)
2. Why can't Nokia just simply send me a replacement phone next day delivery, and have the faulty handset collected???? Network Operators do this (My N73 was replaced within 48 hours by Orange) I now have had no phone for over a week.
I can understand that it's "only" been a few days since I sent my phone back, but surely after paying top dollar AND an extra fee for fast delivery I deserve a better service (considering the phone was faulty from the start)

You would have a chance of getting a reply to your query only if you would click the "Contact Us" tab at the top of this page and let Nokia know. This is a user to user forum. The users try to help each other out with their problems and questions. Your query relates to Nokia's policy, therefore no one here can answer it.
mgoksoy

Customer Returns and Replacement Orders

Hi,
What processes are involved with Customer Returns? How do we create a replacement order, and what should we do if a replacement is not issued?
Thanks,
Rathul.

Hi,
PGI (Post Goods Issue) may be cancelled by Transaction code VL09. The accounting document is just the reverse of the original PGI document.
In my company, we use project stock (movement type 601 Q for PGI). VL09 creates the movement type 602 Q. But rather than VL09, the generally accepted method in my company for the reverse items is to use the movement type 653, "back to the to the storage location." The accounting document takes the cost "from" the project and moves it back "to" the storage location.
The movement types are entered in the schedule lines in customizing, which are then assigned to the item categories. However, in this process, "no invoice" takes place. If you have a delivery related invoice, it should be cancelled beforehand.
If you do not give replacement, the Customer Account needs to be credited.
Please do not forget to create a Billing document (Formally Return Credit Memo) with reference to return delivery. It is very important in order to close the cycle. If you do not create a return credit memo, your delivery will keep appearing in the "Billing Due" list and with status "Being processed". When you create a return order type RE, the billing type is picked up as RE (Return Credit Memo) automatically.
When you are creating a replacement, you can create a replacement order, delivery, and billing. To create the replacement order, you can define an order type by copying from order type OR. In the copy control, you can define the relevant item categories from RE to OR. You can make reference Mandatory for this order type. The delivery type for this replacement order type will be LF and billing type F2.
Reward points if found helpfull..
Cheers,
Chandra Sekhar.

Returns and Replacement Process- Error

Hi all,
We are creating a Complaints Transaction ZCOM in CRM 7.0 with product say XYZ
The complaint Item category is ZCOM
Then we are creating a return request item with item category ZREN and saving the document.
The Document gets successfully distributed to ECC with the return item ZREN.
Now if we open the Complaint document in CRM it shows an error as u201CThe item category 'ZREN' is not permitted for product 'XYZ'u201D.
If we create a Replacement Item with item category ZREP then we get the error as u201CThe item category 'ZREP' is not permitted for product 'XYZ'u201D.
However in ECC the document is complete without any errors.
We are not able to get the reason behind this error.
Al the customizing for item category determination seems to be ok.
Any suggestions??..experts pls reply soon
Regards,
PP
Edited by: PePe on Mar 24, 2010 11:06 AM

Hi Pepe,
I suspect something might be a problem with Item Usage. So we need to check 2 things.
1) Create a return order/ return request item directly in ECC and check the item usage that is getting picked.
2) In CRM also create a return order / return request item and check the item usage. you can put a break point on select statment "SELECT SINGLE * FROM crmc_it_assign" in CRM_ORDER_IT_ASSIGN_SELECT_CB FM.
I suspect the problem with item usage as transaction type and item cat group can not change (assuming materail and product are in sync)
Let me know the outcome. Hope this helps.Regds,
Raghu

IMac Return and Replacement on account of series refresh

Hi We bought a new iMac on 7th October this year, and now Apple has refreshed iMacs in a big way. We wanted to know if we can get an exchange of the old one for new, may be for price.

See this thread:
https://discussions.apple.com/thread/4463081?tstart=0

Replacing soft returns with hard returns in search and replace PM7

How do I search and replace soft returns in PM7 with a
hard return? What do I type in the find box?

Yes BigJohnD,
That is the answer! Thanks so much.
I had hunted for that chart but had not found it yet.
Thanks again, You have been so helpful.
MargoHollis

Return and Exchange process in CSC

In CSC Return and Exchange process, While Returning an Item, Refund type is Store Credit. How to change Refund type as credit card?
Thanks in Advance.

You can check out the products and services tab on this website - follow the instructions and it will let you if you are still under warranty and also let you know how much apple will charge to replace the battery. Also, check out MacResQ.com and compare prices. I believe I read that Apple Stores will give you a 10% discount for a trade in and there are some online places that will let you trade up also.
Cheryl

Using applescript for Find and Replace All in Pages 2.0

i saw that Pages 2.0 is scriptable
i try to create a script for merge use to find and replace all occurence of a certain string using a script but Pages doesn't seems to respond to "Find" even using "System Events"
how can i do to use this function with a script
Thanx for any help
S.B.
ibook G3 Mac OS X (10.4.6)

OK, here's another example. This one gets the text as a string and uses the offset property to find "[", presuming it to be a merge delimiter. (Pages' text doesn't support "offset of").
One failing of this scheme is that the offsets are incorrect if you have inline objects (pictures, shapes, tables, etc.). While it is probably possible to compensate for them, that's a trickier proposition.
<PRE>-- Example merge replacements:
property mergeText : {"[name]", "John Smith", "[address]", "1234 Anystreet"}
on lookup(mergeWord)
set theCount to count of mergeText
repeat with x from 1 to theCount by 2
if item x of mergeText = mergeWord then
return item (x + 1) of mergeText
end if
end repeat
-- If merge field is not found, delete it (replace it with the empty string)
return ""
end lookup
tell application "Pages"
repeat
tell body text of document 1
-- Get text as a string so that "offset of" can be used.
set allText to it as string
set startOffset to offset of "[" in allText
if (startOffset = 0) then
exit repeat
end if
set endOffset to offset of "]" in allText
select (text from character startOffset to character endOffset)
end tell
set mergeWord to contents of selection
tell me to lookup(mergeWord)
set replacement to result
set selection to replacement
if (replacement is "") then
-- Get rid of extra whitespace (space or return)
-- Do it in a "try" block to handle edge cases at start or end of text.
try
set theSel to (get selection)
set ch1 to character before theSel
set ch2 to character after theSel
if ((ch1 is " " or ch1 is return) and (ch2 is " " or ch2 is return)) then
select character after theSel
delete selection
end if
end try
end if
end repeat
end tell</PRE>
Titanium PowerBook Mac OS X (10.4.6)

Find and replace with multiple files and with a watch folder

I am trying to create a watch folder that uses red_menace script to:
1. Have a folder that receives multiple xml files that run the script one by one.
2. then move the files to an output folder.
I tried modifying the set TheFIle to choose file -- the original text file to:
with multiple selections allowed
But that doesn't seem to work. I know i'm missing a step. Any help is much appreciated!
Thanks!
The way i'd like to setup things is having an input folder on the desktop (or just have the application on the desktop and I can drag the files onto it), and let it do it's thing. Once it's done have it export the xml files into an output folder.
Here's what i got so far:
on open
set TheFIle to choose file -- the original text file
set TheFolder to ("Macintosh HD:Users:user1:Desktop:out") -- the folder for the output file
set TheName to (GetUniqueName for TheFIle from TheFolder) -- the name for the output file
set TheText to read TheFIle -- get the text to edit
set Originals to {"KPCALDATE", "KPCALEVENT", "KPCALDAY", "KPCALBODY", "obituaries name", "" & return & "</cstyle></pstyle>" & return & "<pstyle name=\"obituaries text\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>", " .com", " .net", " .org", " .edu", "www .", "www. ", "Ho- nolulu", "<pstyle name=\"kicker 12\"><cstyle allcaps=\"1\">fashion news</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "<component name=\"Headline 1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline 1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 36\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>-", "-", "
Per serving:", "<pstyle name=\"Titlebar - mini, red\"><cstyle allcaps=\"1\">NATION & World </cstyle><cstyle allcaps=\"1\">Report</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "</cstyle></pstyle>"} -- the terms that can be replaced
set Replacements to {"subhed", "subhed", "subhed", "Normal", "obituaries text", ", ", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>
", ".com", ".net", ".org", ".edu", "www.", "www.", "Honolulu", "", "<component name=\"Headline1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 27\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>", " ", "
Per serving:", "","" & return & "</cstyle></pstyle>"} -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (replaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end open
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is missing value then set TheExtension to ""
set TheName to text 1 thru -((count TheExtension) + 2) of TheName
set NewName to TheName & "." & TheExtension
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & "." & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to replaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as Unicode text -- TID's are case insensitive with Unicode text
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
return SomeText
end replaceText
Message was edited by: gamebreakers

When you use the open or adding folder items to handlers, you need to add the parameters for the file items passed to them.
I'll go ahead and post the applet/droplet version of my original script from the previous topic for reference:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into the Script Editor">
-- search and replace multiple items applet/droplet/folder action
-- the terms to replace - edit as needed
property EditableItems : {¬
"one", ¬
"two", ¬
"three", ¬
"four", ¬
"five", ¬
"six", ¬
"seven", ¬
"eight", ¬
"nine", ¬
"ten", ¬
"eleven", ¬
"twelve", ¬
"thirteen", ¬
"fourteen", ¬
"fifteen", ¬
"sixteen", ¬
"seventeen", ¬
"eighteen", ¬
"nineteen", ¬
"twenty"}
-- the folder for the output file(s) - change as needed
property TheFolder : (path to desktop)
property LastEditItems : EditableItems
on run
the applet/droplet was double-clicked
open (choose file with multiple selections allowed)
end run
on open TheItems
items were dropped onto the applet/droplet
parameters - TheItems [list]: a list of the items (aliases) dropped
returns nothing
repeat with AnItem in TheItems
ReplaceMultipleItems from AnItem
end repeat
end open
on adding folder items to this_folder after receiving these_items
folder action - items were added to a folder
parameters - this_folder [alias]: the folder added to
these_items [list]: a list if items (aliases) added
returns nothing
repeat with AnItem in these_items
ReplaceMultipleItems from AnItem
end repeat
end adding folder items to
to ReplaceMultipleItems from SomeFile
replace multiple text items in SomeFile
parameters - SomeFile [alias]: the file to replace items in
returns nothing
set TheName to (GetUniqueName for SomeFile from TheFolder) -- the name for the output file
set TheText to read SomeFile -- get the text to edit
set Originals to (choose from list EditableItems default items LastEditItems with prompt "Select the terms to replace:" with multiple selections allowed) -- the specific terms to replace
set LastEditItems to Originals
set Replacements to (EditItems of Originals with Title given Prompt:"Edit the following replacement terms:") -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (ReplaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end ReplaceMultipleItems
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is in {missing value, ""} then
set TheExtension to ""
else
set TheExtension to "." & TheExtension
end if
set {NewName, TheExtension} to {TheName, (ChangeCase of TheExtension to "upper")}
set TheName to text 1 thru -((count TheExtension) + 1) of TheName
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to ReplaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as text
if SomeText contains OldItem then
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
try
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
on error ErrorMessage number ErrorNumber -- oops
set AppleScript's text item delimiters to TempTID
error ErrorMessage number ErrorNumber
end try
end if
return SomeText
end ReplaceText
to ChangeCase of SomeText to CaseType
changes the case or capitalization of SomeText to the specified CaseType using Python
parameters - SomeText [text]: the text to change
CaseType [text]: the type of case desired:
"upper" = all uppercase text
"lower" = all lowercase text
"title" = uppercase character at start of each word, otherwise lowercase
"capitalize" = capitalize the first character of the text, otherwise lowercase
returns [text]: the changed text
set SomeText to SomeText as text
if CaseType is not in {"upper", "lower", "title", "capitalize"} then return SomeText
return (do shell script "/usr/bin/python -c \"import sys; print unicode(sys.argv[1], 'utf8')." & CaseType & "().encode('utf8')\" " & quoted form of SomeText)
end ChangeCase
</pre>
Edit: how does the choose from list dialog handle those big strings? I'm guessing not very well - is that why you avoided using them?
Message was edited by: red_menace

Pages hangs when I do "Find and Replace"

Three times in the last month, Pages '08 has frozen on me when trying to do a simple search-and-replace in a document. The document was imported as a Word doc, and had (scattered throughout it) some straight quotes. In the past, I have been able to do a search-and-replace of all the quotes within the document, and it would replace them with smart quotes. But for about a month now, doing that causes Pages '08 to choke. I left it all night long once, and in over eight hours it still was frozen with the spinning beach ball. This is a recent development, and sadly, I don't have free support any more. I tried repairing permissions, and the did not help anything.
Any ideas, anyone??

If you download WordService, free from http://www.devon-technologies.com/download/index.html you can easily change your quotes by selecting all and in the Services menu click on Smart Quotes. WordService will also reformat, change cases, remove links, extra returns, extra spaces, and much, much more.
Walt

Folder action to find and replace text and change line feeds

I want to use a folder action to find and replace text and change Mac carriage returns to DOS line feeds inside text files.
The text to be replaced is: "/Users/wim/Music/iTunes/iTunes Music/Music" (without the quotes)
This text has to be removed (i.e. replaced by an empty string)
The text occurs many times within each file.
The files are playlists exported from iTunes in the M3U format (which are text files). They contain Mac carriage returns. These need to be changed to DOS line feeds.
I have found the following two perl commands to achieve this:
To find and replace text: perl -pi -w -e 's/THIS/THAT/g;' *.txt
To change carriage returns to line feeds: perl -i -pe 's/\015/\015\012/g' mac-file
I know that it's possible to make a folder action with Automator that executes a shell script.
What I want to do is drop the exported playlists in M3U format in a folder so that the folder action will remove the right text and change the carriage returns.
My questions are:
Is it possible to make a folder action that executes command line commands instead of shell scripts?
What is the correct syntax for the two commands when used in a folder action shell script? Especially, how do I escape the slashes (/) in the string to be removed?
Thanks for your help

Ok, I've include an applescript to run a shell command. The applesript command quoted form makes a string that will end up as a single string on the bash command line. Depending on what you want to do, you may need multiple string on the bash command lines. I've included some information on folder actions.
It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on. Here is an example.
    Author: rccharles
    For testing, run in the Script Editor.
      1) Click on the Event Log tab to see the output from the log statement
      2) Click on Run
    For running shell commands see:
    http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
on run
    -- Write a message into the event log.
    log " --- Starting on " & ((current date) as string) & " --- "
    -- debug lines
    set desktopPath to (path to desktop) as string
    log "desktopPath = " & desktopPath
    set unixDesktopPath to POSIX path of desktopPath
    log "unixDesktopPath = " & unixDesktopPath
    set quotedUnixDesktopPath to quoted form of unixDesktopPath
    log "quoted form is " & quotedUnixDesktopPath
    try
        set fromUnix to do shell script "ls -l " & quotedUnixDesktopPath
        display dialog "ls -l of " & quotedUnixDesktopPath & return & fromUnix
    on error errMsg
        log "ls -l error..." & errMsg
    end try
end run
How to set up a folder action.
1) right click on folder. click on Enable folder actions
2) Place script in
/Library/Scripts/Folder Actions Scripts
3) right click on folder. click on attach folder action
pick your script.
Create a new folder on the desktop & try.
You can put multiple folder actions on a folder. There are other ways of doing this.
Here is my test script:
on adding folder items to this_folder after receiving dropped_items
    repeat with dropped_item_ref in dropped_items
       display dialog "dropped files is " & dropped_item_ref & " on folder " & this_folder
    end repeat
end adding folder items to
How to make the text into an AppleScript program.
Start the AppleScript Editor
/Applications/AppleScript/Script Editor.app
In Snow Leopard it's at: /Applications/Utilities/AppleScript Editor
Copy the script text to the Applescript editor.
Note: The ¬ is typed as option+return. ption+return is the Applescript line continuation characters.
You may need to retype these characters.
Save the text to a file as an script and do not check any of the boxes below.

Find and Replace HS5.5

How do I include a line feed in the replace section of the
find and replace feature of Homesite 5.5?
Converting many lengthy files from <pre> and <tt>
formats into CSS. Presently the target pages have paragraphs broken
into short lines of text with CR/LF's on every line. I wish to
revert the paragraph back to 'wrapped' text with a single CR at the
end of the paragraph.
I can 'find' and eliminate the " ¶ " symbol from each
line, but I do not know how to "replace " text that should include
this symbol.
text¶
This is some sample text to¶
show graphically the problem¶
I am having.¶
New Paragraph¶
When what I want is :-
This is some sample text to show graphically , the
problem I am having.¶
New paragraph
Presently I can add hash marks (##) where I wish the
paragraph to end. I then globally remove all the "¶"'symbols
that appear in the text. What I want to do now is replace the ##
with code which would produce the following two lines
¶

I have tried many different codes, such as chr(13) and \r,
but they all just insert the code as straight text.
Can anyone clue me in?
Thanks, gil d

as far as special chars in simple F-and-R, I replace some
non-ascii chars by copying from a doc and pasting into the dialog
field.
That wouldn't work for CR/LF, so you have to use the extended
search and replace there as you found out.
Note there is also a function for "Replace Double Spacing
with Single Spacing" (on the menu, under Search).
Probably no help for this case, but good to know.
BTW, be careful with your extended search and replace on
CR/LF. If your lines don't end in a space and a CR/LF, you might
want to replace CR/LFs with a space. Otherwise the last word of one
line might be butted against the first word in the next line with
no space when the CR/LF is removed.
Of course that's not a great solution since it adds a lot of
spaces where you have CR/LFs, and you may not want them all
there...
There is a Remove Returns script that might be of use to you.
It's a lot more manual than you probably want for doing lots of
files.
http://www.wilk4.com/asp4hs/list5.htm#removereturns
let us know here if you find some better solution please,
good luck,
jeff

VBA Word Find and Replace characters but excluding certain characters

I am trying to write VBA code in Word that I will eventually run from a VBA Excel module. The aim of the project is to find specific strings in the open Word document that have length of either one or two characters and are of a certain format, and replace
them with other strings in the same format. This is to do with transposing (i.e. changing the musical key) of chord symbols in a songsheet in Word. The Find and Replace strings are contained in ranges in an Excel workbook, which is why I want to eventually
run the code from Excel. I'm much more experienced in writing VBA code in Excel than in Word, and I'm fairly confident with transferring the 'Word VBA' code into an Excel module.
At the moment I'm trying out code entirely in Word, and I've come across a stumbling block. For example, I want it to Find "A" and replace with "B",
BUT only if the "A" is NOT followed by "#" (sharp) or "b" (flat).
Here is the code I've got in Word VBA, which I obtained by editing code produced by the recorder:
Sub F_R()
'Find text must have specific font
With Selection.Find.Font
.Bold = True
.Underline = wdUnderlineWords
.Superscript = False
.Subscript = False
End With
'Replacement text must have specific font
With Selection.Find.Replacement.Font
.Bold = True
.Underline = wdUnderlineWords
.Superscript = False
.Subscript = False
End With
'Find & Replace strings
With Selection.Find
.Text = "A" 'hard-coded here for testing, but this will
'eventually be referenced to a cell in Excel
.Replacement.Text = "B" 'hard-coded here for testing, but this will
'eventually be referenced to a cell in Excel
.Forward = True
.Wrap = wdFindContinue
.Format = True
.MatchCase = True
.MatchWholeWord = False
End With
Selection.Find.Execute Replace:=wdReplaceAll
End Sub
For the Find & Replace section I want to do something like:
With Selection.Find
.Text = "A"
.Text <> "A#"
.Text <> "Ab"
.Replacement.Text = "B"
End With
- but this produces a syntax error, presumably because you can have only one .Text line (or it won't accept <>?)
I tried adopting the way of excluding chars when using the Like operator, and while it compiles, it will not replace
any "A":
With Selection.Find
.Text = "A[!b#]"
.Replacement.Text = "B"
End With
I suspect that I'm going to have to change tack completely in the way I'm doing this. Do you have any suggestions, please?
The chord names/symbols are preceded/succeeded by either spaces or paragraph returns and can look like these, for example (all Font Bold and Underlined words only):
C7
Dm7
Eb-5
Bb+11
F#m7
i.e. [ABCDEFG][b # | optional][m |optional][- + | superscript, optional][2 3
5 6 7 9 11 13 | superscript, optional]
The crux of my problem is that the note A should be treated as entirely distinct from Ab or A# (and similar for other flattened/sharpened notes).
Sorry for long post.

Hi Ian,
It is not easy to find Microsoft forums. However this forum is for the Visual Studio Net version.
Try this forum for VBA.
https://social.msdn.microsoft.com/Forums/en-US/home?forum=isvvba
Success
Cor

How to use Microsoft Word's Find and Replace with HTML tags?

Hello to all!
I'm trying to figure out how to use the find and replace function in Word to replace html tags. I'd like to be able to change something like this:
random text
To something like this:
random text
I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly.
Anyone able to lend a hand?

Here is my latest regular expression with Perl. I think it matches the spirit of the request in the original post.
Note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html.
perl -0660pe 's^<[sS][pP][aA][nN]\s+class="B01-K-ITAL"\s*>(.*?)</[sS][pP][aA][nN]>^$1^gs' i.html >|o.html
input text
<html> <head>...</head> <body>I'd like to be able to change something like this: #1 one line I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly. note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html. #2 don't be greedy $3 multiline text #4 multiline tag. I believe html allow a carriage return in white space of tags #5 split after the class tag. optional white space #6 mixed case tag no text #7   This browser is IE. This browser is not IE.</body> </html>
output text
<html> <head>...</head> <body>I'd like to be able to change something like this: #1 one line I want to replace the open and close tags without changing or interfering with the text between the tags. I'm pretty sure I should use wildcards, but I can't figure out how to use them properly. note, this isn't as easy as you think. You need to code up the complete set of html rules in you implementation. You need to allow for a certain amount of mal-formed html. #2 don't be greedy $3 multiline text #4 multiline tag. I believe html allow a carriage return in white space of tags #5 split after the class tag. optional white space #6 mixed case tag no text #7   This browser is IE. This browser is not IE.</body> </html>

Returns and replacement

Similar Messages

Maybe you are looking for