Returns in MTO process
Hai guru,s
In MTO process When I am doing Returns Delivery..System showing error like
1.' 0' EA quantity material available.
2. Enter Delivery quantity greater than 0.
From Returns order Quantity also not copying into Return Delivery.
why its happening..any congiguration settings required
Thanks in advance
Edited by: sree sree on Nov 4, 2008 12:15 PM
Dear Sree,
Please check following settings:
T. Code: OVLP
Check whether relevant Item Category is marked as "Relevant for picking" or not.
T. Code: VOV7
Select your Item Category and double-click. Check in Tab: Business Data, whether Field: Returns is marked checked or not.
T. Code: VOV6
Check whether Schd. Line. cat. "DN" is marked checked for " Item relevant for Delivery" or not
Hope, this may resolve the issue.
Best Regards,
Amit
Similar Messages
-
Return and Exchange process in CSC
In CSC Return and Exchange process, While Returning an Item, Refund type is Store Credit. How to change Refund type as credit card?
Thanks in Advance.You can check out the products and services tab on this website - follow the instructions and it will let you if you are still under warranty and also let you know how much apple will charge to replace the battery. Also, check out MacResQ.com and compare prices. I believe I read that Apple Stores will give you a 10% discount for a trade in and there are some online places that will let you trade up also.
Cheryl -
Hi ,
Currently the business use two different process for sending parts to Vendor.
1. First is the standard Sub contracting process where Raw materials is send to vendor ( 541 ) and vendor process the material and sends back ( 543 ) .
2. Second is where the parts are send to Vendor due to defect ( 541) and vendor will either send the material back after fixing ( 542 )or will inform to make credit memo if the parts send cannot be fixed . Althougth this process can be done from Return to Vendor process ( 122 ) , but the business had issues with open PO line item for the return part and raising the Credit memo as Vendor may sometime take time to return the part which may be in months . Also there is no way for the business to know how much of material is lying with vendor at given point of time which is possible by ME20 in this case.
The material planning is such that it consider the Stock at Vendor for Scope of check and hence for the first process this works out properly as it considers stock qty at Vendor's place berfore generating PR , but for second process this becomes the issue as it also considers this stock at vendor place and does planning , but it should not coz this is part return to vendor for fixing and will come again not as assembly .
How best the 2nd process be mapped without the 122 movement and is there any movement type which can take care of the second process and also we can have a seperate MRP planning accordingly .
Regards,
lawreiSee 11.5.10 RECEIVING OPEN INTERFACE를 통해 RETURN처리하는 방법
-
Updating the material moving average price in return to vendor process
Hello,
Our finance department is saying that the affect on the moving average price in our return to vendor process is wrong.
At the moment the moving average price is changed according to the material price in the return PO.
Our financial department says that the moving average price shouldn't be affected at all by a return to vendor.
Can someone tell me how to customize the system according to this request?
Thanks,
SivanDear Friend,
In COOIS Report or MB51 report, Select the list as Documented goods movement and in production order field give the production order number and execute. After executing, if any goods receipt has been done for the same than system will show the same with these it will also show the value of the same. If its not showing than go to change layout and select the same.
Thanks and Regards,
Jitendra Chauhan -
Debit Memo in Return to Vendor Process
Hi!
What is the best practice for creation of the debit memo in the Return to Vendor process?
Is it created from A/P, or is it created from SD (with reference to the outbound delivery)?
Thanks,
Anisha.Hi,
Return to the vendor,
If u have done MIRO, then credit memo has to be raised for the qty & price that has to be returned
otherwise directly u can send returns if u have not done MIRO
thanks -
Return to vendor process from backend
Could anyone of you please share the plsql pseudocode or full process code for return to vendor process ?
Regards,
Kumar
Edited by: 857804 on May 10, 2011 6:20 AMSee 11.5.10 RECEIVING OPEN INTERFACE를 통해 RETURN처리하는 방법
-
"System_Error" Error exception return from pipeline processing!
Hi all,
I get this error everytime I click the red flag in sxmb_moni:
com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_CUST_TO_DFS_MM_: RuntimeException
in Message-Mapping transformatio~
When I go to TRACE of SOAP Header, I see this error:
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
The messages were not posted as 'Application document not posted' in we05: they cannot be seen in we05. Because of this, the number of IDOCS posted in we05 is not equal to the XMLs generated in sxmb_moni.
Please help.
Thanks.
Regards,
IXCUST_TO_DFS_MM
Check this mapping...sometimes just testing in IR is not sufficient....error can also occur at runtime...so take the payload from SXMB_MONI and then test to see why it is failing....
Also there will be some more error text alongwith CUST_TO_DFS_MM...check it to drill down to the root cause...
Edited by: abhishek salvi on May 8, 2009 1:00 PM -
Error exception return from pipeline processing
Hi Friends,
In my File to Proxy scenario, i am getting the following error:
"<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>".
The common error i received in the monitor is Message Mapping error.
But i have checked clearly in the IR, all the mappinngs are correct. While doing the test, it is going well.
I have gone through some sdn blogs, they have stated like cache refresh, but after doing cash refresh also i am getting the same error.
Can anyone give me suggestion?
Thanks in advance.
Regards
BalaHi Aashish Sinha,
I have checked the source code, it is fine. I am getting error in the target code. It is saying that particular filed cannot be mapped. But in the taget that field is existing.
Regards
Bala -
One Sold to party and 250 ship to party (MTO Process)
Dear Experts,
Please provide me the solution with your valuable experience.
Issue is: We are working on MTO process. and I am working in SD on sales order.
issue is here that I have one SP(Sold to party) and many ship to party. I have created 250 Ship to party under one Sold to party in XD02 partner function . But now what we want that, we want to make single sales order and want to distribute same Finish Good to different parties.
Example: Making SO: 1000 with one SP and One SH and Finish Good is FG0001(Same Finish Good we want to distribute into different parties). Finish Good comes Bit n pieces and when we do availability check then it is done with wherever amount of Finish Good we got. First time it is ok and send to one ship to party with delivery now again we got some Finish Good and doing availability check but this time again the ship to party is same but we want to change it for different ship to party with in single Sales order.
Please provide me the solution for this how we can proceed with single sales order.
Thanks for your time.
SmithThanks Ragu,
Issue is
One Sales Order(MTO) suppose quantity is 100 and now I am doing delivery 20 with 5 items each from sales order item level(Changing SH every time at item level with WRT quantity acc to SH, delivery is coming fine.) Now We have to apply postal charges on each delivery.
Postal charges depends on weight and the distance of items that are packed in case or in Boxes.
Example: First delivery is of 5 items and the weight of 5 item is 100kg after packing now delivery guys tell the charges wrt to distance, if they are sending via Speed post then cost will be 100*5 (1km per 1RS so if distance is 5km then charges will be 5rs)=500rs
Now this 500rs we want to add in our billing per bill or collective also like total = price +500 should come.
Please suggest me how should i configure this step by step.
Thanks
Smith -
Hi
While trying to perform the operation 'Annul All Below' in DRM 11.1.2.1, I received the following error: There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.
Has anyone seen this error before, and does anyone know what the fix is?
Thanks,Just giving my view on this.
When you try to restore a Version backup file, you get this error.
This is a known defect. The problem is caused by missing values in properties like AddedOn, AddedBy, which may occur when a version is copied with 'Clear Changed Properties' selected.
this is a known bug
but to workaround - Blend the affected version into a new, empty version, which will populate the 'ChangedOn' properties. You can then back up this version and it will restore.
Thanks,
~KKT~ -
MTO Process : Values shown in Balance sheet
Dear Experts,
One of my client using MTO process in PP. In MTO first create Sales Order. On base of Sales Order then create Production Order. After complition of Production order & at the time GRN of production Order Raw Material Cost & Production cost goes to Sales Order. GRN was a Non Valuated. No account document generated.
Query is, in MB52 FG material showed zero value. All sales order not convert to revenue. some FG material lying in FG storage location. At the time of prepare Balance sheet where we will show these FG material cost which already attach to sales order.
Pls help me to solve this problem.
Regards
Pankaj mishraHello
In MTO process - first creation of sales order
ru the MRP (md02)
cration of process oders ( md04)
convert production order
goods issue to cost centre against production order
Do the GRN of finished product
check the accounting views of finished product.
if you defined all the accounting views properly then system automatically valuated the materials.
Laxman -
Hi,
i am working in MTO Process. Bill of material all Created. MRP Run. after some material added in bill of material . second time MRP RUN.Plant order not created for second added material.
what is the problem .
plz, Advise me.
Regards,
JJHi Uday,
New material maintained for MRP View. and Check it .first mRP running and Added the New material.second time MRP run .
But not Plant Order created.
Edited by: JayamJevan s on Jul 16, 2009 1:50 PM -
Returns delivery being processed
I have seen similar things happening, but nothing exactly the same as our situation so I am hoping that I can get some help
On Thursday we used VA01 to create a delivery order return. This was successful.
Then we used VF04 to process the return and expected the following to occur:
- goods delivery return processed
- billing document created (credit note)
- accounting document created
This is what happened:
- goods delivery return was successfully processed (batch returned to stock in SAP)
- status of the returns delivery is "being processed"
- material was returned to stock
Problem:
the material is currently in inventory but the customer has not been issued a credit.
Another user tried to backout the goods delivery return but cannot. Both of these problems seem to be happening because the delivery return 84000098 is currently being processed
This is preventing us from doing anything with this return and issuing a credit to our customer.
Does anyone have any suggestions that we can use to fix this?
thanks,
Lauriehello, friend.
i could not entirely understand the flow of your processes. but am i correct that you could not create the credit memo after posting goods receipt (from returns)?
if this is correct, try the following:
1. do VA02 and check if there is a billing block in the returns order
2. if there is no billing block and the returns has been posted for goods receipt, check the copy control using VTFL. (i observe that some companies do credit with reference to returns order while some do credit with reference to returns delivery; therefore, do look at this).
hope this helped you.
regards. -
i have done the STO process in sap with delivery and billing and now the other plant rejected the material because of quality reasons i mean returns in STO process how to map this scenario other plant sent back the materials can anybody plz guide me on this
Hi Rahul,
a) In the purchase order, a new returns item (indicator RETPO) is created. As an alternative, you can create a new purchase order with a returns item.
b) With Transaction MIGO or MB01, a goods issue (negative goods receipt) is posted with reference to the purchase order with the movement type 161. That is, the original receiving plant posts a goods issue to the stock in transit of the original supplying plant.
c) You create a delivery with Transaction VL10B (or VL04). Delivery can also be created prior to the goods issue (step b).
d) With Transaction VL02N (or VL02) you post a goods receipt (negative goods issue) for the delivery. That is, the originally supplying plant posts a goods receipt from the stock in transit into the unrestricted-use stock.
Pls reward points.
Regards,
Govind. -
My total process is mto process, all materials configurable materials ,
hi
i am working steal company ,
my total process is mto process, all materials configurable materials , its bases on characteristic , how to configure the r/3 and apo , what is the main parts and settings , how trigger the global atp with based on characteristic , and what configurations
how to create the production order,
i create the 10 sale orders with one production order , how to configure this , what are the settings needs, how to system internal settings
please help him
regards
sankarSankar,
It is contrary to forum rules to place email addresses in posts.
Creating a new implementation for APO is not a trivial matter. Most companies will hire a consulting company experienced in such matters to assist them.
However, if you wish to tackle this yourself, a good starting point for documentation is Best Practices. Your business requirements are unclear, but I will assume you wish to configure Global ATP, and I will further assume you wish to implement some kind of planning (either PP or SNP). Here are the required modules:
Connectivity
http://help.sap.com/bp_scmv250/BBLibrary/HTML/B02_EN_DE.htm
Replication
http://help.sap.com/bp_scmv250/BBLibrary/HTML/B05_EN_DE.htm
GATP
http://help.sap.com/bp_scmv250/BBLibrary/HTML/ATP_EN_DE.htm
PP
http://help.sap.com/bp_scmv250/BBLibrary/HTML/S16_EN_DE.htm
SNP
http://help.sap.com/bp_scmv250/BBLibrary/HTML/B06_EN_DE.htm
For general info about GATP, refer to SAP help
http://help.sap.com/saphelp_SCM700_ehp02/helpdata/en/04/5e7237412a5249e10000009b38f842/frameset.htm
Best Regards & Good luck,
DB49
Maybe you are looking for
-
Can't import .m4p iTunes song to a diff appl
I bought my first song from iTunes, and it has a .m4p extension. I can't import it into a different application (read iPod rip-off). Songs with .wav, .wma and .mp3 can be imported. Advice?
-
Do I have to register all *.jsp servlets in web.xml?
All, I'm hoping someone in this forum can help me. I'm working on a report generator that uses JSP to generate a template which is fed to a formatter. What I want is to programatically call the JSP without having to add an entry for every single repo
-
I want to copy purchase apps from one iPad to another. Possible?
-
Extract Single Tone Information.vi configuration help
Hello. I am trying to measure speed from a sensor that outputs the speed directly to frequency (i.e. 500 Hz = 500 RPM). I am using the Scaled Window.vi with Hanning and the Extract Single Tone Information.vi to get the frequency. I successfully measu
-
Getting an Process Execute a command.
Hi All, can I get the process created by the following code Process p = Runtime.getRuntime().exec("db2cmd");to execute some commands? My problem is I am getting a new window created by executing this line. My commands can be executed in the new windo