Returns in STO process

i have done the STO process in sap with delivery and billing and now the other plant rejected the material because of quality reasons i mean returns in STO process how to map this scenario other plant sent back the materials can anybody plz guide me on this

Hi Rahul,
a) In the purchase order, a new returns item (indicator RETPO) is created. As an alternative, you can create a new purchase order with a returns item.
b) With Transaction MIGO or MB01, a goods issue (negative goods receipt) is posted with reference to the purchase order with the movement type 161. That is, the original receiving plant posts a goods issue to the stock in transit of the original supplying plant.
c) You create a delivery with Transaction VL10B (or VL04). Delivery can also be created prior to the goods issue (step b).
d) With Transaction VL02N (or VL02) you post a goods receipt (negative goods issue) for the delivery. That is, the originally supplying plant posts a goods receipt from the stock in transit into the unrestricted-use stock.
Pls reward points.
Regards,
Govind.

Similar Messages

CIN: Return STO process

Hi All,
I have the scenario regarding to Return STO process.
Step1: Creating the return STO process.
Step2: Negative goods receipt through MIGO. The movement type is 161.
Step3: Creating delivery through VL10B. When iam doing the Post goods receipt (Negative post goods issue) through VL02N iam getting below error.
Error: Purchase Order XXXX does not contain items for a stock transfer
CIN related issue: How to handle the CIN ACTIVITIES. What transactions we have to use for updating or adjusting the Cenvat accounts. And what documents we have to use as references.
Please help me to solve these issues.
Thank you
Regards
Lakshmikanth

Hi All,
Any ideas please?
Regards
Lakshmikanth

Error in Return STO Process(Plant to Plant within company code)

Hi All,
I am doing the return STO Process(Plant to Plant within same company code) .
Scenario:
STO from Plant 1300 to 1400
STO Process: ME21N->VL10B->PGI-> VF01(Proforma)->MIGO
Return STO from Plant 1400 to 1300
STO Return Process: ME21N(item with return indicator)->MB01(MT 101 w.r.t Return STO PO)->VL10B->PGR(Error)
It is giving me the following error.
Deficit of PU GR quantity 5 KG : 20027183 1330 2000 16
Message no. M7021
Kindly help me
with regards
Azeez.Mohd

Dear,
   Please go through this link,
    [Deficit of PL Stock in transfer 10 EA : 100100051 IBM2;
    [Accept material in MIRO without any limitation?;
    [migo-return delivery-credit memo;
Regards,
Sandip

Return STO process

Dear gurus,
What is the correct process steps to be followed in sto returns with delivery .Material is sent from plant to depot and taken into stock at depot ...after one month the return happens (Non excisable depot to excisable plant) Excise duty was paid while transferring from excisable plant to non excisable depot.In return delivery do we have to do picking...How to take excise credit from return sto material.
Pls explain step wise with T codes .....i read all the posts in sdn but still not convinced....
Regards,
Shruthi.S

Check the Below links
[1) STO Returns |Plant to Depot STO Returns]
[2) STO Returns|sto returns]

Stock in transit to the Original Stock( STO process with Billing)

HI All ,
Here is an Issue on Stock Transport Order with Billing
A STO (Purchase Order) Is raised Which consist of 6 line Items.
VL10B is Done and Outbond Delivery no generated.
With this Outbond Delivery no PGI is done for All Line items.
Goods Receipt is Done(RECIEVED quantity will be in Quality Inspection Stock).
So through T.code QA32 the End User had done
a) Accepeted 5 line Item and 1 line Item he had sent as" Return to Vendor".
Note: ALL Items in this STO process are Exiceable Items.
Because of this Return to Vendor of 1 item in QA32 a material document is generated with
Movement type 122 and 1 Item is found in material is Transit in recieving plant .
But now The User wants:
a)To cancel the Material Doc generated with movement type 122 and
b)To bring back the Line Item1(Return to Vendor ) STOCK back to the "Receiving Plant"

Hi,
Since your 122 was created from QA, I don't think you can cancel this document in MIGO.
You may have to perform 101 to receipt from stock in transit again.
Phyllis.

Return and Exchange process in CSC

In CSC Return and Exchange process, While Returning an Item, Refund type is Store Credit. How to change Refund type as credit card?
Thanks in Advance.

You can check out the products and services tab on this website - follow the instructions and it will let you if you are still under warranty and also let you know how much apple will charge to replace the battery. Also, check out MacResQ.com and compare prices. I believe I read that Apple Stores will give you a 10% discount for a trade in and there are some online places that will let you trade up also.
Cheryl

Return To Vendor process

Hi ,
Currently the business use two different process for sending parts to Vendor.
1. First is the standard Sub contracting process where Raw materials is send to vendor ( 541 ) and vendor process the material and sends back ( 543 ) .
2. Second is where the parts are send to Vendor due to defect ( 541) and vendor will either send the material back after fixing ( 542 )or will inform to make credit memo if the parts send cannot be fixed . Althougth this process can be done from Return to Vendor process ( 122 ) , but the business had issues with open PO line item for the return part and raising the Credit memo as Vendor may sometime take time to return the part which may be in months . Also there is no way for the business to know how much of material is lying with vendor at given point of time which is possible by ME20 in this case.
The material planning is such that it consider the Stock at Vendor for Scope of check and hence for the first process this works out properly as it considers stock qty at Vendor's place berfore generating PR , but for second process this becomes the issue as it also considers this stock at vendor place and does planning , but it should not coz this is part return to vendor for fixing and will come again not as assembly .
How best the 2nd process be mapped without the 122 movement and is there any movement type which can take care of the second process and also we can have a seperate MRP planning accordingly .
Regards,
lawrei

See 11.5.10 RECEIVING OPEN INTERFACE를 통해 RETURN처리하는 방법

Not able to cancel the Excise invoice for STO process

Hi All,
In STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
Please guide how to cancel the same.

Hi,
STO has been created either through MM route or through SD-MM route.
In MM route, the process is as below,
You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
In SD-MM route the process is as below,
You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
In MM route, you need to release the Excise doc to Accounting.
In that case, you need to go for J1IV and release the same to accounting.
Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
Please let me know if any further problem you are facing.
Regards
Pradyumna

In STO process , PGI to be made mandatory

I wish to make PGI mandatory for STO process..Steps are as follows:
-Create PO.-.ME23n
-Create Replenishment Delvery -VL10B
-Do PGI -.VL02n>PGI
-Create Proforma Invoice-VF01
-Create Excise -J1iin
In order to achieve that , in VTFL copy control for NL to F8 , I changed Copying Req ( at header) to 003 from 009.
But somehow I am not able to create proforma invoice VF01 ...even after doing PGI.
Message is that there is no delivery related items.

Hi Ramesh
In copy control VTFL for NL->F8, I made the copying requirement at header as '003' ( replacing 009 as was the original).
-Also,as per earlier suggestion, I changed the Copying requirement at Item level ..i.e for NLN to 034 ( replacing 010 as was original).
Next I ran the cycle
a) Created a PO. ..ME21n
b) Created replenishment delivery .VL10B
c)Picked the Delivery Quantity ..VL02n
d) Tried ..Generating Proforma invoice .of .type F8 .in VF01 . It didn't allow.
This was fine and satisfy my requirement of not being allowed to do invoicing before PGI.
Next ....
e) Did PGI for that delivery.
f) Tried to generate proforma invoice ..type F8 . But the system is not allowing me to do so.
Processing status-Incorrect.
Error log..The document is not relevant for invoicing.
What is the way out?
(As a fyi..without the changes I did in copy control, I was able to generate Proforma invoice after PGI.earlier)

Restricting for creating the Billing Document without PGI in STO Process

We want to restrict creating the Billing Document without PGI in STO Process
Delivery Type:NL
Item cataogory:NLN
Billing Type: JEX Profroma Invoice
I have check in VTFL
At Header Level, Routine - 003. for normal sales process LF-F2
At Item Level , Routine - 004
in VTFL-- NL-JEX
At Header Level, Routine - 009.
At Item Level , Routine - 010. here when i changed to 003 and 004 for NL and JEX
i am getting error after PGI when i am doing vf01 error is coming " document is not relevant for Billing"

Hi
Kindly do the belwo
1. goto the t code VOV7 item category determination and select the item category and put the billing relevance as "A"
2. once the step 1 is completed then it will show the billing relevant status AS "A"in the delivery documnt at the item level
The above configuration will be applicable in the new documents only
Regards
Damu

Maintain vendor for excise invoice -STO process??

Hi,
Still facing problem in Same issue so...
I am doing Stock transfer from plant to plant in same company code.
i have maintain all the information in the Excise TAB of migo but still face the following errors.
Error is "Maintain Vendor for the excise invoice. (Message No 4F185) ...????"
In STO process, vendor it won't come in the picture ??Becas , once we create purchase order with UB document type , it 'll ask for only supplying plant not for vendor .
So what might be the problem and how to locate it , trouble shoot the same .???
Thanks in advance
SAP-MM

hi
check following
goto Xk02
give ur vendor ( plant assigned to)
then goto PURCHASING TAB
here in menu EXTRAS>ADD URCHASING DATA
here u can find field for plant
just check and revert back
regards
kunal

STO Process Scenario

Hi Guru's,
It is a STO process, I have 2 plantS MKTO and MPTO, MKTO acts as a Warehouse and MPTO acts as manufacturing plant, Materials in MKTO are Re-order point planning, when ever stock is below re-order point and when we run MD02, it creates a Pur.Req in MKTO and a planned order in MPTO.
where can i find the relation between Pur.Req and Planned order, please guide me.
I can find relationship in MD09 but it showing as structure, can you please guide me where it will store.
Thanks
Satya

Hi
You cannot find the planned order and purchase requisition link in table level also.
once the planned order is converted to purchase requisition you cannot view the planned order in MD13.
the only thing u can check is whether the Pur req is created by MRP/Converted from Plnd order,etc using creation indicator in contact person tab of purchase requisition.
Regards
S.Senthil

Freight capitalization for STO process using shipment cost document

Dear MM experts
I have been testing and trying to charge freight to material using transportation module. I know how to do it in simple STO process without SCD (shipment cost document) but I am not able to do it with SCD.
I have searched and tried every link I found on SCN. Unfortunately there are many open threads and non of them is answered or giving complete solution. For example I have tried this link where Ajit Kumar has explained the scenario in detail I am but unable to achieve my result. I have also tried other links and SAP note 427944 as well.
Now what thing confusing me is accounting entries and documents/steps where these accounting entries will be posted.
My current process is like this in plant to plant transfer under same company code
STO > OBD > Shipment Document > PGI > Accouting Entry with 641 movement type. Material account debit and same account credit. > Shipment Cost document > GR with 101 without any accounting entry > Transfer freight cost to FI using Freight Service PO determination > Accounting Entry Freight Outward Expense Debit and Freight Clearing Account Credit > MIRO > Accounting Entry Freight Clearing Debit and Vendor Credit
As you can see we are booking freight as an expense and not charging to material. Now what I want is that freight should be charged to material. If I am sending material from plant P000 to plant P201 under same comapny code then freight charges should be added in material cost in plant P201.
I have done FRB1 condition type with accrual and copy shipment cost tick mark and other stuff suggested in all those threads but it is not working.
My requirement is to understand the points where and what accounting entries will be created as per my new scenario which is same as old one except one difference which is to charge freight to material instead of booking expense in freight service PO.
Lets take an example that material cost price is 100 and freight charges is 50. Now as per old threads at the time of GR against OBD system will create accounting document with 150 debiting the stock in plant P201. What about credit? If we have added freight here then what about 2nd accounting entry in my first scenario in which freight expense is debited and clearing account is credited? Could anyone please explain accounting entries and points where these entries will be posted?
Another thing is that is it only possible with moving average price to charge freight to material or can we do this with standard price as well using some standard or customized solution?
Detailed and easy to understand answer will be highly appreciated.
Thank$

Hi Moazzam ;
Firstly, you can benefit Badi/s in package VTRA which is given belowed.
Secondly , i think that shipping method --> create sto with delivery --> create shipment document and shipment cost document (problem is starting so system will be create PO and service entry sheet automatically , can you try shipment document is non-related with cost document.
Thirdly , you can post invoices charge to material with miro , if you success to direct freight costs to stock account (BSX).
Also , you can benefit doc. sap behaviours for Std price/ Map --> Planned & unplanned delivery costs in mm
I hope , you can manage your process ; for me standart way is the best.
Regards.
M.Ozgur Unal

In STO process, am getting error in GR"Maintain vendor for Excise invoice "

Hello
In STO process(MM route) I have prepared excise invoice by J1IS. While preparation of J1IS i have enterd customer(recieving plant as customer).I have also mainatin the the supplying plant as vendor in J1ID. But when i am trying to capture the excise invoice at recieving plant during GR am getting error "Maintain vendor for Excise invoice "
Kindly suggest
Regards
Manish

dear sir
please check in customer master record , in control Data tab, vendor master assigned .
if not assigned the vendor master in customer master.
regards
jrp

VPRS cost during STO process

Dear All,
In STO process, the pricing procedure is having the condition type VPRS. My doubt is whether the VPRS will pick-up the Moving Average price or Std.Price? Because the Material Master is having both the price.
How to instruct the system to pick-up the price, which we want to capture? For example if we want the system to pick-up only the Std.Price for particular material and Moving Avg.Price for some other material.
Thank you
Regards
Manivannan R

HI Mani,
Futher to lakshmana, i want to add, the system will pick up the price which have given in the peice control. say if you give std price it will pick up that std.price or if u give MAP it will pick the MAP, but in M.master only for standard price the system will maintain Moving averege price also.
hope this will clear ur doubt
Reward if usefull.
Nagarajan

Returns in STO process

Similar Messages

Maybe you are looking for