Returns processing to vendor

Hi gurus,
can any body explain me abt returns process to vendor in  the material management.
Thanks in advance..
regards,
vikram.

hi
Procedure to return stock to vendor
f LIV and Payment to Vendor is done then
1. ME21N - Create a Returns PO (Activate "Returns" indicator for PO line item)
2. MIGO - Goods Receipt > Purchase Order (Returns PO) (Here system will hit Mvmt type "161" and you can also select Un-restricted/blocked stock from where you want to return the stock)
3. J1IS u2013 Excise Invoice Other Movements
Here click on u201Ccreateu201D button to create an outgoing excise invoice and reverse the CENVAT Amount.
Here put all details as below and Press u201CEnteru201D.
Ref.doc.type - MATD
Doc Number - Material document No of 161 mvmt
Doc Year
Series Group
Excise Group
Vendor
Here check BED, ECS and SECess values to be reversed and click on u201CSaveu201D button to post the excise invoice.
4. J1IV - Post and Print Outgoing Excise Invoice.
5. MIRO - Credit memo w.r.t. Returns PO.
if LIV and Payment to Vendor is not done then
1. MIGO > Return delivery > Material Document (Here refer GR doc, system will determine mvmt type "122" automatically)
2. J1IS u2013 Excise Invoice Other Movements
Here click on u201Ccreateu201D button to create an outgoing excise invoice and reverse the CENVAT Amount.
Here put all details as below and Press u201CEnteru201D.
Ref.doc.type - MATD
Doc Number - Material document No of 122 mvmt
Doc Year
Series Group
Excise Group
Vendor
Here check BED, ECS and SECess values to be reversed and click on u201CSaveu201D button to post the excise invoice.
3. J1IV - Post and Print Outgoing Excise Invoice.
4. MIRO - Credit memo w.r.t. Original PO.
Note: - Excise Transactions to be followed if CIN functionality is in use.
ACCOUNTING ENTRIES
The cycle flows like this;
At the time of GR (MIGO);
Stock A/c - Dr
GR/IR Clearing A/c - Cr
Excise Invoice Posting (J1IEX);
CENVAT Receivable A/c - Dr
CENVAT Clearing A/c - Cr
At the time of LIV (MIRO);
Vendor A/c - Cr
GR/IR Clearing A/c - Dr
CENVAT Clearing A/c - Dr
At the time of Vendor Return (MIGO);
Stock A/c - Cr
GR/IR Clearing A/c - Dr
Excise Invoice for Vendor Return (J1IS & J1IV);
CENVAT Receivable A/c - Cr
CENVAT Clearing A/c - Dr
At the time of Credit Memo (MIRO);
Vendor A/c - Dr
GR/IR Clearing A/c - Cr
CENVAT Clearing A/c - Cr
regards
kunal
Edited by: kunal ingale on Jan 8, 2009 12:37 PM

Similar Messages

  • Return process in vendor and customer systems

    Hi experts,
    here is the scenario:
    A customer returns a prdouct he received from vendor on account of quality defects.
    What is the standard process followed by industry for this return scenario both in customer and vendor R/3 systems?
    Does customer sends any ASN or IDOC or any other communication to the Vendor along with the returned products?
    If the vendor receives any communication in form of IDOC or ASN then how does he comes to know that the customer has sent a return delivery?

    Hi,
    This is a SD process ie to make a return sale order i think order type is RE do delivery for SO and PGR and  items will be stock.
    Thanks
    suresh

  • Vendor return process clarification

    Hi All,
    We have created return PO for vendor.
    While posting goods receipt system is asking excise invoice no and date, which excise invoice no has to be entered ?
    and after posting we have to go to J1IS transaction and adjust duties for return process.
    Over here the duties are not flowing in J1IS transaction.
    Please throw some light.
    With Regards,
    Vijaykumar P

    Taxes are not flowing in J1IS transaction.
    While doing J1IS , Click on the "Get Excise Invoice" Button on the header screen menu, This will open up a screen for you to select the appropriate Incoming invoice for reference, the base value will be picked up from this .
    Also Check the configuration setting SPRO-Logistics General-Tax on Goods Movements-India-Basic Settings-Maintain Company code settings-No. Exc Sel & ExSelDays columns against your plant.
    Check below link widely discussed subject,
    [Vendor Return Process   |Re: Vendor Return Process]
    [Return to vendor (Excise material)|Return to vendor (Excise material)..?]

  • Vendor Return process in case of Import Goods (Excisable)

    Can anyone provide me the complete process details with configuration in case of Return of Import Goods to Vendor?
    The scenario is we have received the goods from an overseas Vendor by availing the benefit of CVD and we have made payment to the Vendor. Now the goods need to be returned back to the Vendor overseas.
    Thanks in advance

    Import Vendor return is like re export from business point of view.
    You can follow export sales process in sap.
    What i suggest is for example if it is raw material you can create a bom with parent material as X-01,child material as Y what
    you are returning to vendor.
    Note: Create parent material as HALB with sales view & accounting view with valuation of raw material.
    Do production goods receipt,it willl bring stock to parent material.
    Create customer for vendor.
    Adopt export sales process,create a sales order,delivery,billing,invoice,excise invoice,ARE1.
    Note : Discuss with FI consultant/core team take care of accounting effects in billing.
    Clear balances for customer or vendor using F-53 or F-58.
    Note : You need to tell excise/submit documents telling it is not actual export.
    or
    If you opt for purchasing route,then there is lot of customs formalities to be completed & also need to pay duties taken credit,depends on value of goods if it is high, you can opt for import vendor returns or ask vendor for debit memo which will be adjusted with future purchases against same vendor
    I also asked same question in forum, refer link for solution [ Import material - Vendor returned(Indian scenario)  |Import material - Vendor returned(Indian scenario);

  • WM-Batch management  & vendor godds returning process

    Hi All,
    1.Please explain the process the auto batch picking for 201 and 261 movement types .I have configure complete batch management settings in both invemtory and wm level but auto batch is not picking when confirmaing the production order .As per business process the batch has to pick automatically via FIFO basis.Is ther e is any OSS note
    2.What is the return delivery process to vendor.When i am returning material to vendor ,the outbound delivery is created and transfer ortder is creating sucessfully ,but at the time of PGI the system is displaying an error message as " goods receipt is not possible with this document ype.The document type i am using is correct speciaaly created and use for only  for returns .What are the configurations required .The 601 movement type si configured for the warehouse type.
    Thanks
    hari prasad

    You have to setup batch search strategy for inventory managment, and its condition records, to enable SAP to search and find a batch record.
    follow the link and check the knots on the left menu
    http://help.sap.com/saphelp_erp2005/helpdata/en/25/283be44f7811d18a150000e816ae6e/frameset.htm

  • Vendor Return process with order type ZPO - movement type 161

    Dear Friends ,
    Here is my question
    There are two scenarios for vendor return
    while UD and stock posting , we directly post the stock to  vendor return 121
    but what is the process for vendor return after we move the stock to blocked stock  and then return to vendor
    I tryed to create new PO with order type PO return , when do the migo GR system always propose 161 and creating inspection lot
    how to stream line the process without inspection lot
    Thanks & Regards
    Raj

    Dear Gajesh,
    many thanks
    but when i enter the Retrun PO in MIGO system automatically propose the movement type 161 , is there any way to change the movement type , is it standard sap settings
    Please advice
    Thanks & Regards
    Raj

  • Pl tell me config and process of return PO to vendor via shipping

    Hello,
    My sloc is HU- Warehouse managed. I am creating a scenario of return purchase order to vendor using 161 Movement type. I have created a PO with 161 movement type. But whenever I am using MIGO with reference to return PO, OBD is created with customer. But I want OBD to be created for vendor because we are returning the delivery to vendor and not customer. I have done all the setting in vendor master of return delivery to vendor in purchasing view.  Please provide me step by step process of configuration and business process of written PO to vendor via shipping.
    Thanks
    Milind

    Hi,
    Pre requisites Vendor return Via return PO and delivery.
    1. You must create a customer master record for the vendor and assign the same in vendor master u2013Control view
    2. In vendor master u2013purchasing view flag the Returns Vendor check box.
    3. Maintain shipping point determination (OVL2)
    Refer below link for config
    [http://help.sap.com/bp_blv1600/BL_US/Documentation/Scenarios/V3I_BPP_EN_US.doc]
    Regards,
    Vikas

  • Vendor return process

    Hi ,
    Can anyone please tell me when do we use delivery type RL and when delivery type RLL during vendor return process. I am having some PO s in the system for which return is done with some deliveries having delivery tepe RL and some RLL.
    Thnaks
    Rohit Chavan

    Hi Rohit,
    I checked existing deliveries in our sandbox system and I found out:
    - "RL" delivery type is used if you create the delivery with reference to a return PO item (mvt 161)
    - "RLL" is used if you create return delivery from MIGO (A02-R02) (refering to the material document of GR) and check the "Via Delivery" checkbox (mvt 122)
    What is the difference between mvt 161 and mvt 122 return, youcan find many threads on the forum and you can also check SAP online help.
    Regards,
    Csaba

  • What is process returns inventory  to vendor

    Hi can you please help us  for process returns inventory  to vendor.
    if i have purchase 100ltr & sold only 80 ltr how can i have returns balance 20ltr to vendor.

    No need to post in MM forum .
    If you post this in MM forum, it will be rejected.
    Please put some effort in search. You will get many discussions which will explain you the details about return delivery process.

  • Return process in Third Party system

    Dear Friends,
    Please suggest me the complete process of return under Third Party Order system, with T codes and paths,
    Regards,
    Atul

    Hi ATul
    Officially the return process is not supported by standard SAP ERP system for the third-party process.This functionality was never designed and is not supported.
    The note 751609 is the official statement of SAP to this problem.
    But any return goods to vendor from customer can be settled through credit notes.
    The process is to first pass a credit memo to Vendor and after the process the with reference to Sales order a third party credit memo can be issued to customer
    Hope this will help you.
    Regards
    Ramesh

  • Return process in Third Party Sales

    Hi ppl need some help,
    In Third party Sales what happens if certain goods supplied by the Vendor to the customer are 'Defective' & are to be returned by the customer.
    Does the customer return it to the Company to which he placed the order or he returns it to the Vendor.
    How can we configure this process in SAP to settle the billing & issue the credit memo to the customer?
    Shilpi

    Hi Shilpi,
    third party Return process you can configure like this,
    Take return goods from ur customer, Your customer will return goods to you and not to vendor, remember one thing ur cutomer doesnt know who is vendor.
    Create CR with refeerence to RE. Because RE will contain that Product and quantity which you ar getting back from the Customer and that you have invoiced the customer.
    E.G. If you Sent 2 Quantiy of Materail XYZ at 50 Rs each to the customer, but you Got invoice from ur vendor at 40 Rs Each.
    and if customer retuirn 1 quantity u have to return him 50 Rs and not 40 Rs.
    So Create CR with respect to RE.
    Hope this will help.
    Revert back if u need any further help.
    Thanks,
    Raja

  • Return Process for Depot Excise Billing.

    Hi,
    We are following Depot Excise Billing Process. Where we are using Stock Transport Purchase Order Process for transferring the goods from Mfg.Plant to Depot.
    Now, we require return process for returning the Goods from Depot to Mfg. Plant. Please also confirm Excise Register needs to be updated? If yes, please tell us the transaction for the same.
    For satisfactory answer ful points will be rewarded.
    Thanks and Regards,
    Dilip Shende

    Hi Murali,
    I have followed the procedure given. However, in J1IEX transaction system gives me error message "Excise Invoice 9001000027 28.05.2008 of plant 410027 does not exist"
    Where Excise Invoice 9001000027/28.05.2008 is the number generated in T.Code J1IJ. And 410027 is Vendor code.
    Please give your valuable suggession to solve the issue.
    Thanks and Regards 
    Dilip Shende

  • After Return Delivery to Vendor cannot remove shipping notification in MD04

    Hi.
    Good Day.
    I would like to ask help regarding to my issue.
    We had to create a return delivery to send the goods back to the vendor A. The packaging item was blocked and we created the outbound delivery via transaction MBRL with reference to material document when we do GR with the inbound Delivery A. After having processed all necessary steps including the posting of the goods issue of outbound delivery, the inbound delivery A is again open and expects a goods receipt of the returned units. This can also be seen in MD04. Meanwhile the supplier has sent a new "compensation" delivery, with a different inbound delivery B. This was goods receipted and with this delivery the complaint/return process is finished from the supplier's and our point of view.
    Problem: What remains is the original open inbound delivery A. Currently we have no idea how to get this one deleted, but we need to cancel it, because there won't be a credit note and there won't be another physical delivery for this inbound delivery A.
    What I have done so far:
    1) Tried using VL09 to inbound delivery A but there was no effects. probably because the inbound delivery A is already closed.
    2) It is not possible to set the item of SA to finished because we my use that item again.
    Thanks for your help.
    Med'z

    Hi Madhu.
    Good Day.
    First of all I really appreciate your response.
    I tried to change the first inbound delivery but canu2019t do much. Because all fields were block since it is already completed.
    The system shows the error "The goods movement status (partially or completely processed) does not allow the item to be deleted."
    I also tried to change the schedule line but it didnu2019t do any effect with the issue.
    Thank you,
    Best regards.
    Medel.

  • Questtion about Third party returns process

    Hi All,
    We have an issue in returns PO process -Third party
    Customer Forward Processp flow as below
    OR (US Sales Order) -> US Purchase Requisition (NB) -> US Purchase Order (NB) -> MIGO (Mvt 101) -> MIRO (Vendor Invoice) -> F2 (Customer Invoice)
    Customer Return Process:as below
    ZREP (with US customer) -> US Purchase Requisition (NB) -> US Purchase Order Return (NB) -> MIGO (Mvt 161) -> MIRO (Vendor Credit Memo) -> ZRE (Customer Credit Memo)
    When the user raises Return purchase order , it is taking the price from Inforecord for current validity date.
    But ,Our user wants , it should select the same price from the initial purchase order( as in forward process) even though the price changed in Inforecord for the current validity date when the Return purchase order raises .
    Please advise how to achevie this reqmt. Any user exits available.
    Regards,
    Amara.

    Hi Amar
    Can you you share the solution you achieved , which will be the usefull to other members
    of the forum also. Bcoz as fas as  I am concerned SAP doesn't suppot the return process
    in third party sales. Did you use any user exits?
    Thanks
    Sushant

  • Third Party Sales Returns process

    Hello All
    We have a third-party sales process which is automated i.e Sales order and Purchase requisitions(VA01) are created using the data coming in the incoming EDI file, the Purchase requisition is automatically converted to a Purchase order, the Invoice Reciept(MIRO) is posted and the Sales Invoice (VF01) is posted.
    The question is how do we handle the Returns or the Credit process?
    Is there a way I can configure the system to create a Returns order which will also update the Pur.Req quantity then the Purchase order quantity  or directly the Purchase order quantity. I can then use this information to raise a credit to the Vendor Invoice.
    I don't want to just raise a credit memo and update the sales side and leave the purchase side open.
    I appreciate your reply.
    Best Regards
    Rama

    Third Party Return Process
    Please check this extract from the sap library :
    If the vendor grants you a credit memo on a quantity or a value basis, you can then send this credit memo directly to your customer.
    The billing type Third-party credit memo (G2S) is available for this. The billing type Third-party credit memo works with the item category TASG (third-party credit memo item). The Billing-relevance indicator F is set in Customizing for Sales for this item category. This means that the cost is not created. In Customizing for Sales, the item category TASG is set at item level in copying control for the billing type G2S (copying control sales document by billing document) as the target item category (source: TAS-> Target:> TASG.)
    Process Flow
    Create a billing documente with billing type Third-party credit memo (for further information, see the section Creating a billing document in the Billing document). Enter the third-party order as a document still to be processed. The quantities are automatically removed from the invoice.
    The above is the process for giving a credit memo which can be adapted for return goods.
    Regards,
    Rajesh Banka
    Reward suitable points.
    How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

Maybe you are looking for