Reusable business components not found

Hi,
We have had this problem sporatically for quite some time now. We are using JDev 11.1.2.1.0 and are importing our business components as a jar file. We will work on our application for days and then out of the blue we receive this error when we run the application locally.
Business Components: Unable to find referenced object
Object: it.FAEditTable.entityobjects.Awardperiod.
Validating Business Component: it.faedittable.viewobjects.AwardperiodView
Owner: it.faedittable.viewobjects.AwardperiodView.Awardperiod
BC Project: it.faedittable.model.Model
I have to muck around with it until I can get it to work again. Usually requires any of removing the jar file from the libraries and classpath tab and re adding it, deleting the imported files and reimporting them, playing with the model.jpx file or rebooting my machine.
I will usually get this message with it
Business Components: There are warnings in this object that need correction (Model).
One or more of the imported Business Component Projects are not on the classpath.
Because of this, there may be missing referenced objects from the missing import(s).
Import: Model
this is becoming quite annoying to say the least.
If anyone has any insight or a possible reason for this it will be greatly appreciated!
thanks
Lana

Hi,
thank you for the replies. I have checked and the classpath is in the correct location. I have removed/re added the jar file, closed/re opened the application and rebooted my machine but was still getting the errors. Because this is a converted application (from 10g) we now have two model.jpx files.
The model.jpx file that was created in 10g (which is where the error was referencing) had a line that was pointing to a directory in the jar file that doesn't exist so I simply removed it and the rebuild was successful. Just for the heck of it I readded the code and it still works! This code also existed in the 10g version (I was assuming the model.jpx that was created in 10g was not referenced in 11g but that is where my errors are coming from).
We have had in the past, success with altering the code in the model.jpx files both 10g and 11g - it usually involves removing or adding one or more containee tags. What we have noticed however, and this may or may not be related is only some of our tables can be seen in the 'imports' page of the model.jpx. For example, we have separated our tables into different folders in the jar component - all tables related to FA are placed in FAEditTable folder, all AR tables are placed in AREditTable folder for ease of use. When the model.jpx file is created there are several containee tags which are referencing (in the PackageName) the different folders in the jar file. Also created at that time is one AppContainee tag which points to the reusable jar file. When we open the model.jpx file and click on the Imports link in the Overview tab only those folders that do NOT have entries by way of the containee tag display the 'Contents' of that package as displayed below in the Imports page
Packages from Model:
it.FAEditTable.entityobjects
it.AREditTable.entityobjects
Contents of it.AREditTable.entityobjects:
AccountsReceivable
AccountPaidDate
The contents of FAEditTable.entityobjects will not display any tables but the AREditTable.entityobjects will (AccountsReceivable and AccountPaidDate). The FAEditTable folder has a containee tag in the model.jpx file but the AREditTable does not. The source of the model.jpx would look like this:
<Containee
Name="entityobjects"
ObjectType="JboPackage"
PackageName="it.FAEditTable.entityobjects" />
<AppContainee
Name="Model"
ObjectType="JboProject">
<DesignTime>
<Attr Name="_SourceName" Value="ReusableComponents.jar"/>
</DesignTime>
</AppContainee>
I hope this makes sense to everyone. I may try excluding the model.jpx file that was created in 10g for awhile and see if the problem happens again.
This jar file issue was also a problem when we were using 10g versions.
Trying to reproduce this error would be a daunting task as this application was created in 10g then converted over to 11g. I would also have to add the HRSchema tables to a new project and deploy as a jar file but if I find anything else I will let you know Chris!!
again, thanks for the help!
Lana

Similar Messages

Business place not found for plant?

Hi,
I am facing the below mentioned problem with regard to Business Place with reference to Purchase order for Brazil.
We are getting error while creating Purchase order."Business place not found for plant 8149"
can any one has idea on this..
Thanks
Venkatesh

Venkatesh,
You will need to assign your business place to your plant in config (SPRO->Cross Application components->General Application Functions->Nota Fiscal->CNPJ Business Places->Assign Business Places to Plants).
The system is trying to derive the business place during PO creation and that is the reason you are getting this error.
Hope this helps.
H Narayan

CMOS COMPONENTS NOT FOUND

CMOS COMPONENTS NOT FOUND IN THE DATABASE LIBRARY , HOW CAN IC'S LIKE HEF4051, 4053, 4052 ETC. CAN BE ADDED TO SIMULATE AND USE IN PCB DESIGN. I HAVE NO KNOWLEDGE
OF SPICE OR VDL

abc corp,
There is an existing forums page discussing a 74HC4501... here:
http://forums.ni.com/ni/board/message?board.id=370&message.id=4268
If you cannot find an exact spice model for these, you could also try looking for a comparable component in our existing analog switch components - we have CMOS switches with several configurations similar to the HEF4051, 2 and 3. I am not exactly sure what you are looking at in terms of performance / model comparision but this should get you started.
From the Master DB, go to the 'Mixed' group and you will see the appropriate families.
From a modeling standpoint, you could build an equivalent functional level circuit in Multisim using the ideal analog switch and other ideal logic components. The ideal switch is located in our 'Mixed_Virtual' family.
Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St. 1-A
S. Portland, ME 04106
Email: [email protected]
Tel. (207) 892-9130
Fax. (207) 892-9508

SPROXSET ...Unable to rectify Business systems not found issue..

Hi,
On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
Teresa

Check RFC destination
The below links may be useful
How do you activate ABAP Proxies?
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
File to R/3 via ABAP Proxy - ABAP Proxy
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

Getting a "Business partner not found with partner function type requester"

Hi There,
After I add a text item to the shopping cart using the SHOP t-code, I get a message "Business partner not found with partner function type requester" What could be causing this and how can I rectify this problem.
Please help mas this is an urgent issue.
Thanks,
Grace

Hi Grace,
First check :
1- transaction : CRM_OM_BP_INTEGRATE
select org structure where your user is and check that you have green lights (no missing address....)
2- Run transaction USERS_GEN
Select check user
Is everything correct or does the user need to be repaired ?
Kind regards,
Yann

Business system not found in CPACache

Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
CPAcache refreshed for dela as well as full
Adapter specific identifiers are fine
SLD cache cleared in IR ID
Business System name is found in CPAcache
error repeated
Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
Still error is repeating.
Can anybody give a solution for this problem please?
Regards,
Venkat

Hi Venkat,
The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
Regards
Pothana

Business place not found for plant 8149?

Hi,
I am facing the below mentioned problem with regard to Business Place with reference to Purchase order for Brazil.
We are getting error while creating Purchase order."Business place not found for plant 8149"
can any one has idea on this..
Thanks
Venkatesh

Hi,
U can found the business place as below:
if u r using 4.7 version:
spro>>financial accouting> Financial accounting global settings>> tax on sales\purchase >>basic settings >> india >> Business place
if u r using 4.6c version:
spro>>financial accouting> Financial accounting global settings>> tax on sales\purchase >>basic settings >> settings for tax on sales or purchase in south koriea >> Define Business place & Assign business place to plant
hope it helpful for u
all the best
Prasad

Business number not found

Hi Girus,
When I m tring to run the payroll for Canada I m getting following error.
Business number not found
Check account and registration number configuration from 1.01.2010 31.01.2010
I m maintaining 0461,0462,0463,0464 tax infotype for canada.
Please help me to resolve this isssue.
Thanks
Sanju

Hello Sanju,
Kindly refer the WIKI document, check whether you have maintained customizing
https://wiki.sdn.sap.com/wiki/display/ERPHCM/WCB
Mainly check whether you have maintained WCB A/C no with Rate for the Province , the employee belongs from the following IMG link
Payroll Canada--> Worker's Compensation --> Set up WCB accounts
With Regards,
S.Karthik

Business numbers not found

Dear experts,
I am executing Canada payroll , when executing payroll I got the error"Business numbers not found check account and registration number configuration
I have configured Business numbers in IMG, still i am getting error in KTXDM function...
Please do the need full
Regards
VSR

Business number configuration for Canada Payroll works in two ways.
Option 1: Uses the Personal area of the employee along with Contract field on Infotype 1.
Business number will be displayed on Infotype 0461 thru 0464 infotypes (Dynamically derived based on the configuration done).
Once the above is setup then when you run paryoll processing the error message should disappear.

Business Components not available while using Model Configurator in ID

Hi,
In ESR:
I created a ProcessIntegrationScenario PIS_myScenario (and completed with sender and receiver components, actions etc)
In ID:
I created and activated two BusinessComponents: BC_A and BC_B
I created a new Configuration Scenario: CS_Test, and selected Type of ES Repository Model:"Process Integration Scenario".
and launched "Model Configurator".
Now in the step "Assign Components" i see a tab "Assign Business System Components for A2A Configuration" , in that for "Communication Component" value, when i tried to select from the value list, it is only showing the Business Systems and not the Business Components BC_A and BC_B.
By using the "Model Configurator" how can we create scenarios using the "Business Components" instead of "Business Systems".
as i am trying the test scenarios, i want to use Business Components, i.e business services in earlier versions.
I also opened the Business Components BC_A and BC_B and added the corresponding inbound and outbound service interfaces in the receiver and sender tabs.
after that also, the Business Components are not visible for selecting from within Model configurator.
let us know if its possible

thanks abhishek for your reply.
as mentioned in the reference link given by you, i edited the Process Integration Scenario in ESR, i ticked the checkbox "External Party with B2B Communication", and activated.
In ID, in Model configurator, i can now see and select the Business Components BS_A and BS_B.
but when i try to generate the configuration objects, it says: Not Configurable: Component view only contains external application components.
so cannot proceed with Model configurator with Business components, in my scenario.
seems i need to use only Business Systems.

Transport target for business system not found in System Landscape Director

Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
Chandu

Hi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

OSB Business Service not found

Hello,
I'm creating a business service with sbconsole. The enpoint uri is http://localhost:7001/SalesOrders/Order.
I activate the changes with the change control activate button.
I'm checking with IE the link and I am getting Error 404--Not Found.
What am I missing?

Hi,
Can you try opening this in your browser http://localhost:7001/SalesOrders/Order?wsdl
I have an wsdl, and I used it to create a business service
Are you able to run your Business Service successfully.
I used the business service to create a proxy service. When I invoke the proxy service, I'm getting BEA-380002 error code, reason Not Found. The routing node of the proxy service can not find the proxy service.
In your proxy service,under route node please cross check that you are calling the Business Service you created only ?? Or some other service.
Regards,
Karan
Oracle Fusion Middleware Blog

DEV- QAS : Obligatory transport target for business system not found

Hi guys!
I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
Here were my steps:
Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
Am I missing something here?
Thanks!
Ricardo Sancio Lóra
Brazil

Hi,
If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
Regards,
Sarvesh

Obligatorytransport target for business system not found in SLD

Dears,
We implemented CTS+ in our PI three system landscape.
While implementation we configured local SLD and after that for dev and QAs we configured a central SLD.
And for Production we have seprate SLD.
In DEV SLD we have three buisness systems:
File_Dummy of type DEv
File_Dummy_Q of type QAS
File_Dummy_P of type PRD
Now in transport target group of File_Dummy I put File_Dummy_Q and in File_Dummy_Q I put File_Dummy_P but for BS File_Dummy_P target group is empty.
Now I put all these BS into a request and import them in QAS then I get error:
Obligatorytransport target for business system File_Dummy_P not found in System Landscape Directory
Now I am not getting what to put in transport target of File_Dummy_P as it is of type.
I tried to put their File_Dummy_P but we can not put PRD type BS there.
I also tried with dev and qas BS there but still same error.
Please suggest how to resolve this error.
Regards,
Shivam

Hi,
did you transported the associated technical systems of your business systems....?
Also I assume you have assoicated the targets foryour business systems in SDL..
like for D targets are Q and P
for Q source is D and Target is P
for P sources are D and Q... if not assoicate the same...
and also make sure the three groups are available for three environments...
HTH
Rajesh

Transport Error while transporting ID TR (Target Business System not found)

Hi Gurus,
We are facing a issue with transports while transporting a ID transport to Prod from QA.(We are using CTS+)
Its our first transport to PROD and we have checked the configuration for BC Application Server in Administration ->Content Maintenance and all looks good .
Our SLD is looks as below
We have shared SLD for Dev and QA and it looks as below
Dev's BS has target business system of QA BS
And in Prod Sld looks like as below
QA's BS has target business system of Prod BS
When we transport from Dev To QA transport works fine but when we transport from QA to Prod its gives below error and in error its points that target for Dev business system is not found in Target SLD.
We thought we should try to point Dev BS ====>>Prod BS may be that might work work but its also giving error same error.
Below mentioned is the Error
class java.rmi.RemoteException:
ClientServerException exception:Import failed because of business system transfer of object Service BS_ACN_MDH_DEV:Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
com.sap.aii.ib.core.transport.api.TransportCsException: Import failed because of business systemtransfer of object Service BS_ACN_MDH_DEV: Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.postprocessTransport(TransportPostprocessor.java:741)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.DirImportPostprocessor.postprocess30Import(DirImportPostprocessor.java:62)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.InternalPostprocessingService.postprocess(InternalPostprocessingService.java:205)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.PostprocessingService.doPostprocessing(PostprocessingService.java:171)
#at com.sap.aii.ibdir.server.pvcadapt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:90)
#at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:107)
#atcom.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
#atcom.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:142)
#at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:721)
#at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importXiStream(InternalTransportServiceImpl.java:500)
#at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importXiStream(TransportServiceImpl.java:265)
#at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:306)
#at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
#atcom.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
#at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
#at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl1_0.process(HmisLocalLocalObjectImpl1_0.java:144)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
#at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
Can you guys please help out in resolving this error.
Thanks in Advance.

Hi,
I assume you have two SLDs(SLD1 - for Dev and QA , SLD2 - for Prod) and PI 7.0 or XI 3.0.
In this case the ideal solution would be to
1. set up a SLD bridge between your Dev/QA SLD and Prod SLD. The bridge basically forwards all the Technical system SLD info to Prod. SLD.
2. Import Dev business systems information into Prod.
3. Then create transport target,
Make sure that you have created Business Groups for Dev/QA/Prod properly
Edited by: Nageshwar Reddy on Mar 17, 2009 8:29 AM

Reusable business components not found

Similar Messages

Maybe you are looking for