Reusable Web template in WAD 3.X

Hi Experts,
Can anyone tell me where do we have reusable web template in WAD 3.x please.
I want to make user of 3D pie chart. Please help
Thanks

Hi Ahmed,
you can see all the Standard web templates at WAD -> Find -> * and find, you will see all Standard web templates, we can use these, if you want to change any, copy standard one change the copied template.
you can check Standard "0ANALYZER" web template in that you can change chart type.
Navigation path for WAD 3.x :
Start -> Programs -> Business Explorer -> Business Explorer (SAP 3.x) -> WAD.
Best Regards.
Edited by: Daya Sagar on Oct 26, 2009 10:06 AM

Similar Messages

  • Error while saving Web Template in WAD

    When i try to save a web template in WAD i get an error masg " Unable to generate history entry" and when i save ok i can see that the templete has been saved wven though i had the error message.I am in BI 7.0.Any idea what this error is and how do i get it resolved

    Hello,
    This error comes when your portal configuration is incorrect.
    please deploy the support Desk Tool according to the note 937697 and fix the portal configuration.
    Regards, Karol
    SAP NetWeeaver BI, Development

  • How to set specific URL for broadcasting web templates from WAD

    Hi experts,
    I have created a sample web template in WAD by using SAP BI standerd  query.When I am executing the web template,it is redirecting me to some unintended web portal.I know the correct portal URL.Can anybody tell me where the redirecting portal URL settings are maintained in BI/BEx/WAD??
    Regards,
    Mandar.

    Hi Suman,
    Thanks a lot for your valuable reply.
    By the navigation you mentioned,I was able to identify where exactly I have to change the URL prefix.However,when I am saving the changes I made to URL prefix,system is redirecting me to "Varient Attributes" screen.I don't know what exactly this screen is about.Please help..
    Regards,
    Mandar.

  • Error while opening web template through WAD 3.X

    Hi all,
    The below error is getting displayed while opening web template through WAD (Sap BW 3.X):
    " Internal error - No Template property standard item. "
    What needs to be done now.
    Please reply.

    Hi,
    Check the below thread...
    Web Application Designer Opening Error

  • URGENT:  Not seeing the variable Pop-up for Button , on web template in WAD

    Hi gurus,
    In IP I have a standard plan function for 'Copy', which has a few variables defined on the funciton itself (as to be changed):
    Version from:
    Version to:
    Order from:
    Order To:
    Fiscal year from:
    Fiscal year to:
    All of the above variable are created with the following parameters:
    Variable input: Optional (have also tried madantory)
    Ready for input: is flagged.
    Variable represents: Single value.
    No default entry.
    No personalized data.
    Now in WAD, I create a button group for this function by selecting the Command, 'Executing Planning Function (simple)', manually entering my plan function technical name next to 'Command specific parameters', and selecting the dataprovider created for the filter I created in IP, and finally flagging the 'Display variable' button.
    The problem is, on the web template the variable screen does not appear when I click on the function button. It executes the function in the background without giving me the pop-up for variable selection. And obviously since the variables have no default values, nothing is processesed.
    I've tried this with planning sequence instead, and still wont give me the variable pop-up screen..
    I've actually explicitlet entered the variables on the 'Parameters for Command screen', the same screen where you enter the filter for databinding and well as the function.
    It still wont work (no variable pop-up screen).
    Is this issue related to the support pack. We're on SP12 right now?
    If not, do any of you gurus have any ideas? Big points will be rewarded for this.
    Thanks

    In the parameterization of the command, there is an option 'show variable screen'. I am not sure if you have mentioned this clearly, but have you checked this option?

  • Error while saving web template in WAD? Error in opening RFC Connection?

    Hi All.
    In BI 7.0, While trying to save an web template using BEx WAD resulting an error as mentioned below:
    " Java communication error : Error when opening an RFC connection "
    Who provides this RFC connection?
    - By Basis guy or BI Guy or EP guy or helpdesk.
    Please reply.
    Thanks in Advance.

    Hi,
    Kindly review the notes 917950 and 888687 and ensure that all your web configuration settings are proper.
    Award points if helpful.
    Thank you.
    Regards
    Suresh

  • Problem exporting to excel when using embedded web templates through WAD

    Using web templates designed with WAD, we are experiencing an issue when trying to export excel when using embedded web templates. 
    We have set up tabstrips within our templates that load other templates (embedded into the global template). 
    Upon right clicking on any query and choosing "Export to Excel", any query that is in one of the tabs using the embedded web template item does not show up.  Any queries in natively in the global web template will export and show up fine.
    Any thoughts on how to enable something like this, or workarounds to make this work?  We decided to split up these templates for performance reasons and can't go back from that decision.  Also let me know if you need a better explanation of what we're trying to do.
    Thanks in advance!
    Jonathan

    Hi SDBI,
    Is this in place of loading a new template per tab?  We are using container layouts in all of our templates so we can link things into tabstrips as well, we have just split up some templates to be embedded into tabs for performance reasons and data locking.
    Also when exporting, we are looking for all of the items displayed at that time to be exported, however only the items from the global template show up, not all of the displayed queries.  For example, anything outside of the tabstrip will export perfectly, but since the query embedded into the template the tabstrip is loading is not part of the native web template, it does not show up.
    Seems like a tool limitation to me when embedding templates?
    Thanks,
    Jon

  • Problem in opening existing web template in WAD

    hi,
      I am facing a problem when opening an existing template through Web Application Designer on my computer.
      We are on BW 3.5 and i am able to login into Web Application Designer and when i tried to open an existing template, it gives me the following error.
      " Run-time error '9':
        Subscript out of range"
    If anybody experienced any similar type of problem and resolved it, please let me know.
    I also want to let you know guys that my IExplorer version is 6.
    Thanks in advance.

    make sure no one else is editing the template when you open the template in WAD.
    Download the latest BW front end patch for BW 3.5, the latest patch available iS BW FE Ptach 6. This can downloaded from http://service.sap.com/patches .
    Thanks.

  • Using commands for the web template in WAD

    Hi Experts,
            I have designed a web template for a scenario. As it contains lots of data, I have to give some filters such as drop-down etc to avoid the scrolling. In this case, while executing first time, the drop-down select the 'Show All Values' option.
           So , i try to use some commands, so that I can select the default values.
    PROCEDURE USED TO SELECT THE DEFAULT VALUES :
    -> In the drop-down, I used the command called " Set Filter Value for a characteristic[SET_SELECTION_STATE_SIMPLE].
    ->In the selection type, I choose the member name option so that I can able to select the values that are present in the characteristic.
          But while executing the template, the filter is taking the different value(single value only) irrespective to the given value in the command.
            So pls give me the solution for the problem. Also Give me a reply if there is any other possibility to restrict the data.
    With Regards,
    Yokesh Kumar.

    hi all,
    sorry to update you so late, because I can't log on SDN from time to time.
    the weird thing is that my peer can upload the picture successfully while I still can't see it in the list.
    I am handful, I'll do a research and update you guys later.
    thanks.
    Jennifer

  • How to assign a query to a web template in WAD

    Hello experts,
    How do I assign the web template to the actual query? I have a new template wich is a copy of 0ADHOC which I would like to use for a certain query.
    Is it sufficient to assign the template of interest in TC 'RSCUSTV21' (standard web template) or does this have no impact in this case?
    Best regards,
    Fredrik

    Hi experts,
    I'm using BI 7.0, and am having Fredrick's same problem
    Nothing was defined in RSCUSTV21, so I typed in the technical name of my own Web Template for Ad-hoc analysis.
    However, when I executed the report from the Query Designer, it did not display according to my template. I attempted to empty the cache, as suggested by Bhanu, but it did not work.
    When I click on the Information button in BEx Web Analyzer, it still shows the default 0ANALYSIS_PATTERN as the Web Template.
    Any ideas? I will assign points to who provides the solution.
    Thank you,
    Orestis

  • Creating a Tachometer web template in WAD in SAP-3.5x

    I have to create a WAD report in SAP-3.5x where I need to display a tachometer. How to set the fields from the data provider (an existing query in this case) whose data the tachometer would represent.

    I am creating a tachometer in WAD 3.5x.
    Actually the requirement for the tachometer i want to design is that it should display the Average value of the data column that is displayed in the dataprovider(which is a view in this case).
    My view (Data Provider for tachometer) contains only one data column, and its Result row contains the Average value for the data column. But when I run WAD, the tachometer doesnot read the result row, instead it reads each of the individual rows and creates a pointer for each record. Whereas as per my requirement, the tachometer should display only a single pointer depicting the average value of all records.
    I am trying to suppress all the single value rows and display only the result row in my view, am unable to do so.
    Any help would be much appreciated
    Thanks
    Shikha Verma

  • How to insert a picture in the web template, in WAD 3.5?

    Hi Gurus,
    I'm in a hurry to insert one picture into a template, and I noticed there must be some library to add the picture to the list first, then should we inert from the list.
    Could anyone give a hint how to add the picture into the list first?

    hi all,
    sorry to update you so late, because I can't log on SDN from time to time.
    the weird thing is that my peer can upload the picture successfully while I still can't see it in the list.
    I am handful, I'll do a research and update you guys later.
    thanks.
    Jennifer

  • Web Template can not be found in WAD - Urgent please....

    Hi,
    I have activated a Web Template from business content.  I have also included the same in a role.
    I need to make some changes in this.  I can not find this in WAD.  I can not find the role in WAD. When I search this in Metadata repository, I can see the web template but surprinsingly it doesn't show the underline query name and role..
    can anyone please tell me the reason for this.  This is urgent please.
    Regards,

    1. Display the role in PFCG. Do you see the web template listed?
    2. Is the role assigned to your id?
    3. Did you try searching (by using the binoculars) for the web template in WAD open window?

  • Error in saving web template

    Hi all,
    I have added a logo in web template in WAD but when i am clicking on save button in WAD it is showing error "object cannot be processed due to a transport problem".
    What is the problem. Please help !!!!
    Regards,
    Saurabh

    Hi Saurabh ,
    Either you have to close WAD and open it again, so it will recognize the new BEx transport,
    or some depenent objects are locked in another transport request. In that case, release both, open a new BEx transport, restart WAD and try saving again.
    Regards,
    Sigal.

  • Error BRAIN 276 when you execute a Web template in BI Admin Cockpit in  EP

    Hi Experts,
    I have Installed BI Administration Business Packages in Portal and configured necessary steps in BI System.I have assigned the role in Portal and BI System.
    I tried executing one iview...and was getting the following error:
    Error loading template 0TPLI_0TCT_MCA1_Q0143
    and when i click on the above error ..i was getting another window which shows below message:
    Technical Information for Message:
    Error loading template 0TPLI_0TCT_MCA1_Q0143
      Notification Number BRAIN 276
    I was suggested by SAP Note 1014795 to do the below changes :
    TEMPLATE_ID=0TPLI_0TCT_MCA1_Q0143  To TEMPLATE=0TPLI_0TCT_MCA1_Q0143
    Please note that the above note says to replace  TEMPLATE_ID  by TEMPLATE in the property of "BEX Web application Query String" of the IView in Portal
    and also please note that i have Version=SAP BW 2.X/3.X in Iview Property .
    After having made the above changes iam getting the BEX Web Analyzer...where i have the options to open a query ( from all the infoareas of BI System).and then i will select the query (0TCT_MCA1_Q0143) and am executing the same to display the data.
    i know that this Is not the correct way of executing the iview for BI Admin Cockpit.
    Can anyone help me how to execute the Web Template automatically when the user clicks on IView ?
    we have all the above Web Templates Corresponding to BI admin cockpit in active mode in when checked from WAD 3.X , but when when i search for the above web templates in WAD 7.0 i do not find them
    Is there anything that i need to activate in BI System ? Or in Portal System?
    Or do i have to execute the above web templates in  BI WAD before linking them to portal iviews?
    Do we have to Migrate the Web Templates from  BW 3.5 to BI 7.O?
    Thanks
    P.Navakanth
    -When i try to execute the web templates

    We are having this exact same issue - example of one of the errors:: Error loading template 0TPLI_0TCT_MCA1_Q0114.  We get this error for all MCA1 templates.  Basis says they've deployed latest BP BI Administration 1.0 with Patch 2 (BPBIADMINOSP_2-1000342B.SCA).The info refers to BI Admin Cockpit, Business Package for BI Administration,
    BP BI ADMINISTRATION 1.0 ,BI Usage Statistics,0TCT_CA1.
    I see from documentationthat the multicube 0TCT_MCA1 is from 0TCT_CA1 and 0TCT_VCA1
    From the documentation in http://help.sap.com/saphelp_nw70/helpdata/en/26/9ef41d14dc424183b4807538be8e1e/frameset.htm, under web templates,
    1) How come there are more than 1 template with same name and Query with same names- for example:
    Web Template: Long-Term Trends in Total Runtimes of BI Applications
    WebTemplate: 0TPLI_0TCT_MC01_Q0114
    This Web template is the container for the query 0TCT_MC01_Q0114 and is designed to provide detailed analyses.
    AND
    Web Template: Long-Term Trends in Total Runtimes of BI Applications
    WebTemplate: 0TPLI_0TCT_MCA1_Q0114
    This Web template is the container for the query 0TCT_MCA1_Q0114 and is used for detailed analyses
    2) How come the delivered process chains load other technical content, but does not load 0TCT_CA1
    Basis re-deployed the bi admin cockpit contents, but still have error in loading template 0TPLI_0TCT_MCA1_Q0114.
    3) Do we need to do any of the following?
    SE38 u2013 run RSTCC_ACTIVATEADMINCOCKPIT_NEW
    RSA1 - bi content, install & transport
    Check role SAP_BI_BW_ADMINSTRATOR
    Se38 u2013 rs_template_maintain for active templates u2013 look for MCA1 templated
    Tr code RSDDSTAT
    Activate Virtual providers
    Anything else?
    Thanks!

Maybe you are looking for