Reuse a form format and modify in the same solution?
I would like to reuse the same form in the current solution but slightly modified. Can you tell me the best way how to do it?
Thanks.
I would like to reuse the same form in the current solution but slightly modified. Can you tell me the best way how to do it?
Hi tfernand2013,
It is very well possible to reuse the same form. In that way I think I am a little "extreme" that I only use reused forms in all my 70+ applications.
The best way however is dependent on many factors, of which the most important are the kind of modifications you want to apply, and your house style to manage dynamic forms.
Can you give some more information of the wanted modifications, and when these modifications should take place. With "current solution" do you mean the form as it is now?
Imb.
Similar Messages
-
Form POST and GET at the same time?
I am trying to add an entry to a database so the form has to
be set to POST.
But I would also like to have the code from the form added to
the URL so I can use this in the next page, but I would need to
have a GET action in the form for this...
How can I do both at once?
I have done a work around by adding a time stamp on the new
entry, then the next page just finds the most recent addition - it
works but its a bit clunky.
Any better alternatives?Thank you for all your efforts, but the problem for me is
that there are so many possibilities of what to do I would never be
able to get it right. Its like being given the ingredients for a
soufflé but not the method. It would take a heck of a lot of
guesses to find something that was like a soufflé.
Below is the PHP for the page, I assume you mean to put the
< mysql_insert_id() > somewhere amongst the part where it
says this:
$insertGoTo = "AdminProductNewCheck.php";
if (isset($_SERVER['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $_SERVER['QUERY_STRING'];
But I still have no idea EXACLY where to put it. Nor how to
actually insert it, as the script you have sent refers to "kossu"
???? and printf ???? is this the same as echo?
I am beginning to think there is nothing wrong with how it is
set up now!
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue)
: $theValue;
$theValue = function_exists("mysql_real_escape_string") ?
mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" .
htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) &&
($_POST["MM_insert"] == "updateForm")) {
$insertSQL = sprintf("INSERT INTO products (`Department`,
`Section`, `Show`, `Code`, `ShowOrder`, `Name`, `Description`,
`Dimensions1`, `Dimensions2`, `Dimensions3`, `Dimensions4`,
`Dimensions5`, `Dimensions6`, `Price`, `Note`) VALUES (%s, %s, %s,
%s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s)",
GetSQLValueString($_POST['Department'], "text"),
GetSQLValueString($_POST['Section'], "text"),
GetSQLValueString($_POST['Show'], "int"),
GetSQLValueString($_POST['Code'], "text"),
GetSQLValueString($_POST['ShowOrder'], "int"),
GetSQLValueString($_POST['Name'], "text"),
GetSQLValueString($_POST['Description'], "text"),
GetSQLValueString($_POST['Dimensions1'], "text"),
GetSQLValueString($_POST['Dimensions2'], "text"),
GetSQLValueString($_POST['Dimensions3'], "text"),
GetSQLValueString($_POST['Dimensions4'], "text"),
GetSQLValueString($_POST['Dimensions5'], "text"),
GetSQLValueString($_POST['Dimensions6'], "text"),
GetSQLValueString($_POST['Price'], "double"),
GetSQLValueString($_POST['Note'], "text"));
mysql_select_db($database_chilstone_connection,
$chilstone_connection);
$Result1 = mysql_query($insertSQL, $chilstone_connection) or
die(mysql_error());
$insertGoTo = "AdminProductNewCheck.php";
if (isset($_SERVER['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue)
: $theValue;
$theValue = function_exists("mysql_real_escape_string") ?
mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
$colname_ProductCode_RS = "-1";
if (isset($_GET['Code'])) {
$colname_ProductCode_RS = $_GET['Code'];
mysql_select_db($database_chilstone_connection,
$chilstone_connection);
$query_ProductCode_RS = sprintf("SELECT * FROM products WHERE
Code = %s", GetSQLValueString($colname_ProductCode_RS, "text"));
$ProductCode_RS = mysql_query($query_ProductCode_RS,
$chilstone_connection) or die(mysql_error());
$row_ProductCode_RS = mysql_fetch_assoc($ProductCode_RS);
$totalRows_ProductCode_RS = mysql_num_rows($ProductCode_RS);
mysql_select_db($database_chilstone_connection,
$chilstone_connection);
$query_SectionHeadings_Recordset = "SELECT * FROM sections";
$SectionHeadings_Recordset =
mysql_query($query_SectionHeadings_Recordset,
$chilstone_connection) or die(mysql_error());
$row_SectionHeadings_Recordset =
mysql_fetch_assoc($SectionHeadings_Recordset);
$totalRows_SectionHeadings_Recordset =
mysql_num_rows($SectionHeadings_Recordset);
$currentPage = $_SERVER["PHP_SELF"];
$queryString_ProductCode_RS = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_ProductCode_RS") == false
stristr($param, "totalRows_ProductCode_RS") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_ProductCode_RS = "&" .
htmlentities(implode("&", $newParams));
$queryString_ProductCode_RS =
sprintf("&totalRows_ProductCode_RS=%d%s",
$totalRows_ProductCode_RS, $queryString_ProductCode_RS);
?>
Text
Text -
Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.
Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.
-
Form and report on the same page...
Hi,
I want to have a form and report on the same page... as soon as user enters the information and submit the form via button then the report should be able to display the addition...
may I know how to accomplish this...
Thanks in advanceHi
Can you try like this
1.First create an empty page and add a html region and template as form region and add the necessary fields to insert into table
2. create a another region with type as "SQL Query" and template as report region and add the necessary fields for the reports.
Once u entered the details into form region and created process and insert into table and then automatically the report region query will fetch the recently added row and displays in the report.
Hopes this might helps you.
Thanks & Regards
Srikkanth.M -
Archive files are in XML format and not in the original format
Hi all,
I am using a receiver file adapter with archiving option. When I look at the archive files they are in the XML converted format and not in the original flat file format received. We would like to store these files for audit purpose and it doesnt make sense to store XML files. We are in SP04. Does a note need to be applied or any other extra configurations need to be done which I might have missed? Please advise.
-TeresaHi,
>>>Wow, the note says its fixed in SP10
but only the split is fixed not the XML messages in the archive I think (from the note)
>>>Is there any alternative quick fix and I hate manual work
create 2 new folders - connect one of them with the file adapter and the second one remains for archives
in you normal destination folder for your files add a simple program that will check if there are any files and copy them to those two folders - this could be the fastes but obviously not the best solution I guess
Regards,
michal -
My iPod Classic was stolen and returned to me by police but now it "cannot be synced because it cannot be written to or read from". I noticed the thief had changed the format to "windows" but I have restored it and still get the same message.
If the media is in the library then yes it is that simple. Connect the device, load it up with your media. The problem is when you try to connect a full device to a new empty library on a new computer when iTunes will offer to replace the content on the device with that in the local library, i.e. nothing! (For anyone in that position see Recover your iTunes library from your iPod or iOS device).
You should be able to add your devices at https://supportprofile.apple.com/ though I'm not sure what happens if the second hand iPod was previously registered.
tt2 -
Latin1 and latin2 in the same form with a unicode system
We're migrating from 4.6B to 6.0, and from non-unicode to unicode. we need to print latin1 and latin2 in the same form.
How we can do? We try with unicode-device type: in the preview seem to be good, but then (of course) if printers don't supports unicode special caracthers are bad.
I read about a cascading fonts...
Have you had a solution?
tnx
LorenzoYes.. Solved. Now latin1 and latin2 are printed on the same form, without changing any sapscript.
But now, the layout of the print are slightly moved down, so it's missing a little bit of document, as the printer as mistaked margins. The same printer, on the same form, with another device type print correctly (except, of course, the problem on latin2).
Tnx in advance for your solution -
Designer 6i and 10g on the same machine?
I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIASee my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g. -
XML document structures must start and end within the same entity
Hi there,
I'm working with a client/server application and using SaxParser for reading in xml. I get the SaxParserException: XML document structures must start and end within the same entity. I understand what that means, but it isn't applicable! The xml data being used is well-formed. I checked the well-formedness with Stylus Studio to make sure. Here's the data:
<?xml version='1.0' encoding='UTF-8'?>
<vcmessage>
<vcsource>3</vcsource>
<processevent>16</processevent>
<shape>
<llindex>0</llindex>
<shapetype>9</shapetype>
<shapeproperties>
<shapelocation>
<xcoord>54</xcoord>
<ycoord>184</ycoord>
</shapelocation>
<bounds>
<width>24</width>
<height>24</height>
</bounds>
<fgcolor>
<fgred>0</fgred>
<fggreen>0</fggreen>
<fgblue>0</fgblue>
</fgcolor>
<bgcolor>
<bgred>255</bgred>
<bggreen>255</bggreen>
<bgblue>255</bgblue>
</bgcolor>
<thickness>1</thickness>
<isfilled>false</isfilled>
</shapeproperties>
</shape>
</vcmessage>The parser generally stops around the </bgcolor> tag.
I'm using Eclypse as my IDE. I'm wondering if there's something wrong with it? Or maybe there's something wrong with the class I'm using for reading in the XML? Followng is the class.
Please advise,
Alan
package vcclient;
import java.io.*;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
import javax.xml.parsers.*;
public class XMLDocumentReader extends DefaultHandler
private VCClient client = null;
private Writer out;
private String lineEnd = System.getProperty("line.separator");
private boolean haveSourceType = false;
private boolean haveUserName = false;
private boolean haveMessage = false;
private boolean haveProcessEvent = false;
private boolean haveLinkedListIndex = false;
private boolean haveOpeningShapePropertiesTag = false;
private boolean haveShapeType = false;
private boolean haveOpeningShapeLocationTag = false;
private boolean haveShapeLocation = false;
private boolean haveOpeningXCoordTag = false;
private boolean haveOpeningYCoordTag = false;
private boolean haveOpeningBoundsTag = false;
private boolean haveBoundsWidth = false;
private boolean haveBoundsHeight = false;
private boolean haveOpeningFGColorTag = false;
private boolean haveOpeningBGColorTag = false;
private boolean haveOpeningThicknessTag = false;
private boolean haveOpeningIsFilledTag = false;
private boolean haveOpeningImageDataTag = false;
private boolean haveOpeningTextDataTag = false;
private boolean haveFGRed = false;
private boolean haveFGGreen = false;
private boolean haveFGBlue = false;
private boolean haveBGRed = false;
private boolean haveBGGreen = false;
private boolean haveBGBlue = false;
private boolean haveThickness = false;
private boolean haveIsFilled = false;
private boolean haveImageData = false;
private boolean haveTextData = false;
private VCMessage vcmessage = null;
public XMLDocumentReader(VCClient value)
client = value;
vcmessage = new VCMessage();
public VCMessage getVCMessage()
return vcmessage;
public boolean haveSourceType()
return haveSourceType;
public boolean ParseXML(InputStream stream)
boolean success = false;
// Use the default (non-validating) parser
SAXParserFactory factory = SAXParserFactory.newInstance();
try
// Set up output stream
out = new OutputStreamWriter(System.out, "UTF-8");
// Parse the input
SAXParser saxParser = factory.newSAXParser();
saxParser.parse( stream, this );
success = true;
catch (SAXParseException spe)
// Error generated by the parser
System.out.println("\n** Parsing error"
+ ", line " + spe.getLineNumber()
+ ", uri " + spe.getSystemId());
System.out.println(" " + spe.getMessage() );
// Unpack the delivered exception to get the exception it contains
Exception x = spe;
if (spe.getException() != null)
x = spe.getException();
x.printStackTrace();
return success;
catch (SAXException sxe)
// Error generated by this application
// (or a parser-initialization error)
Exception x = sxe;
if (sxe.getException() != null)
x = sxe.getException();
x.printStackTrace();
return success;
catch (ParserConfigurationException pce)
// Parser with specified options can't be built
pce.printStackTrace();
return success;
catch (Throwable t)
t.printStackTrace();
return success;
return success;
public void startDocument()throws SAXException
emit("<?xml version='1.0' encoding='UTF-8'?>");
nl();
public void endDocument()throws SAXException
try {
nl();
out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI,
String lName, // local name
String qName, // qualified name
Attributes attrs)throws SAXException
String eName = lName; // element name
if (eName.equals(""))
eName = qName; // namespaceAware = false
emit("<"+eName);
if (attrs != null) {
for (int i = 0; i < attrs.getLength(); i++) {
String aName = attrs.getLocalName(i); // Attr name
if (aName.equals("")) aName = attrs.getQName(i);
emit(" ");
emit(aName + "=\"" + attrs.getValue(i) + "\"");
emit(">");
if(makeStartTag(eName).equals(Constants.OPENING_SHAPEPROPERTIES))
haveOpeningShapePropertiesTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_SHAPELOCATION))
haveOpeningShapeLocationTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_BOUNDS))
haveOpeningBoundsTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_FGCOLOR))
haveOpeningFGColorTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_BGCOLOR))
haveOpeningBGColorTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_BGGREEN))
System.out.println("See BGGreen");
else if(makeStartTag(eName).equals(Constants.OPENING_BGBLUE))
System.out.println("See BGBlue");
else if(makeStartTag(eName).equals(Constants.OPENING_THICKNESS))
haveOpeningThicknessTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_ISFILLED))
haveOpeningIsFilledTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_IMAGEDATA))
haveOpeningImageDataTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_TEXTDATA))
haveOpeningTextDataTag = true;
public void endElement(String namespaceURI,
String sName, // simple name
String qName // qualified name
)throws SAXException
if(sName.equals("") && !qName.equals(""))
sName = qName;
emit("</"+sName+">");
else
emit("</"+sName+">");
if(makeEndTag(sName).equals(Constants.CLOSING_SOURCE_TYPE))
haveSourceType = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_USER))
haveUserName = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_MESSAGE))
haveMessage = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_PROCESSEVENT))
haveProcessEvent = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_LINKEDLISTINDEX))
haveLinkedListIndex = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_SHAPETYPE))
haveShapeType = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_SHAPELOCATION))
haveOpeningShapeLocationTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_WIDTH))
haveBoundsWidth = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_HEIGHT))
haveBoundsHeight = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BOUNDS))
haveOpeningBoundsTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGRED))
haveFGRed = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGGREEN))
haveFGGreen = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGBLUE))
haveFGBlue = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGCOLOR))
haveOpeningFGColorTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGRED))
haveBGRed = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGGREEN))
haveBGGreen = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGBLUE))
System.out.println("See closing BGBlue");
haveBGBlue = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGCOLOR))
haveOpeningBGColorTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_THICKNESS))
System.out.println("XMLDocumentReader: Step2");
haveOpeningThicknessTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_ISFILLED))
haveOpeningIsFilledTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_IMAGEDATA))
haveOpeningImageDataTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_TEXTDATA))
haveOpeningTextDataTag = false;
private String makeStartTag(String tag_name)
String start = "<";
String end = ">";
return start.concat(tag_name).concat(end);
private String makeEndTag(String tag_name)
String start = "</";
String end = ">";
return start.concat(tag_name).concat(end);
public void characters(char buf[], int offset, int len)throws SAXException
String s = new String(buf, offset, len);
if(haveSourceType == false)
if(vcmessage.getSourceType() == null)
try
if(s.equals(""))return;
int sourcetype = Integer.parseInt(s);
vcmessage.setSourceType(sourcetype);
catch(NumberFormatException nfe){}
else if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE)
if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE && haveUserName == false)
vcmessage.setUserName(s);
else if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE && haveMessage == false)
//When the parser encounters interpreted characters like: & or <,
//then this method gets invoked more than once for the whole message.
//Therefore, we need to concatonate each portion of the message. The
//following method call automatically concatonates.
vcmessage.concatMessage(s);
else if(vcmessage.getSourceType() == SourceType.WHITEBOARD_SOURCE)
if(haveProcessEvent == false)
try
vcmessage.setProcessEvent(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveLinkedListIndex == false)
try
vcmessage.setLinkedListIndex(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveShapeType == false)
try
vcmessage.setShapeType(Integer.parseInt(s));
catch(NumberFormatException nfe){}
if(haveOpeningShapePropertiesTag)
if(haveOpeningShapeLocationTag)
if(haveOpeningXCoordTag)
try
vcmessage.setXCoordinate(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveOpeningYCoordTag)
try
vcmessage.setYCoordinate(Integer.parseInt(s));
//reset all flags for ShapeLocation, X and Y coordinates
haveOpeningXCoordTag = false;
haveOpeningYCoordTag = false;
//haveOpeningShapeLocationTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningBoundsTag)
if(haveBoundsWidth == false)
try
vcmessage.setBoundsWidth(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveBoundsHeight == false)
try
vcmessage.setBoundsHeight(Integer.parseInt(s));
//reset flag
//haveOpeningBoundsTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningFGColorTag)
if(haveFGRed == false)
try
vcmessage.setFGRed(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveFGGreen == false)
try
vcmessage.setFGGreen(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveFGBlue == false)
try
vcmessage.setFGBlue(Integer.parseInt(s));
//reset flag
//haveOpeningFGColorTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningBGColorTag)
if(haveBGRed == false)
try
vcmessage.setBGRed(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveBGGreen == false)
try
vcmessage.setBGGreen(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveBGBlue == false)
{ System.out.println("getting BGBlue data");
try
vcmessage.setBGBlue(Integer.parseInt(s));
//reset flag
//haveOpeningBGColorTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningThicknessTag)
try
vcmessage.setThickness(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveOpeningIsFilledTag)
vcmessage.setIsFilled(s);
else if(haveOpeningImageDataTag && vcmessage.getProcessEvent() == org.jcanvas.comm.ProcessEvent.MODIFY)
vcmessage.setBase64ImageData(s);
else if(haveOpeningTextDataTag && vcmessage.getProcessEvent() == org.jcanvas.comm.ProcessEvent.MODIFY)
vcmessage.setTextData(s);
//reset
haveOpeningShapePropertiesTag = false;
emit(s);
//===========================================================
// Utility Methods ...
//===========================================================
// Wrap I/O exceptions in SAX exceptions, to
// suit handler signature requirements
private void emit(String s)throws SAXException
try {
out.write(s);
out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
// Start a new line
private void nl()throws SAXException
try {
out.write(lineEnd);
} catch (IOException e) {
throw new SAXException("I/O error", e);
//treat validation errors as fatal
public void error(SAXParseException e)
throws SAXParseException
throw e;
// dump warnings too
public void warning(SAXParseException err)
throws SAXParseException
System.out.println("** Warning"
+ ", line " + err.getLineNumber()
+ ", uri " + err.getSystemId());
System.out.println(" " + err.getMessage());
}Just out of curiosity what happens if you append a space to the end of the XML document?
-
SpryValidation and DependentDropdown in the same page
hi,
With "SpryValidation" and "DependentDropdown" in the same page
SpryValidation, on "Submit" event, doesn't work
Any solution??
Thanks
GabrieleHi Gabriele,
when checking some code located in some file in the "includes" folder, it seems that the onsubmit event is already "captured" by ADDT´s own clientside form validation routines.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
Can I run Tiger and Leopard on the same computer
Hi folks.
I've been meaning to install Leopard for ages but have never got round to it (I bought the retail box when it first came out). I have upgraded my RAM to 2GB and my hard drive to 320GB with no problems.
My upgraded hard drive has been partitioned into 2 equal parts of 160GB. These appear on desktop as Mackintosh HD1 and HD2. HD1 is the disk with all my files, music, OS etc and HD2 is empty
I have 2 bootable clones of my present system - one is on a 160GB external and the other is the original 80GB HD that I replaced.
My question is this - can I install Leopard on to my 160GB external HD, then clone it on to the empty HD2. If I do this would I be able to run both Tiger and Leopard on the same Macbook?
Is there any problems with this plan? Would I be able to transfer between the 2 OS and how do I install Leopard on the external drive. Is it just a case of inserting the Leopard DVD and choose the external drive as the target?
As usual thanks in advance
Del# Original Tiger in the internal HD, New Leopard in the external HD.
# New Leopard in the internal, Legacy cloned Tiger in the external.
# Split internal, one partition with Tiger, another with Leopard.
Leopard is backwardly compatible with older Macs, just make sure yours fulfills the minimum system requirements, both use the same filesystem format, so each can see the other. You can't run both at the same time, unless you purchase the server version of Leopard and run it virtualized. 99.9% of Firewire external HD's are bootable, some USB's are bootable but have to test first. You can choose which system to boot from by pressing the Option key at boot time, before the chime. Just make sure the external HDD is plugged in and turned on if that's where you want to boot from.
When I migrated my PBG4 from Panther to Tiger, got an external FW HDD, cloned Panther onto it, upgraded using Archive and Install, cleaned up, customized and tested it. When I was satisfied all was ok, cloned the original Panther onto another partition of the external HDD, wiped and tested for failure the internal HDD, then cloned the known good and tested Tiger into it. Only thing that died along the way was my old and ancient Photoshop v2.x, that refused to run on Tiger. -
Error Running Oracle Apps and Discoverer at the same time
Hello,
We are having trouble running Oracle Apps and Discoverer at the same time on certain user's machines. Here are the specifics:
The user opens Oracle Apps in Internet Explorer. The user then opens Discoverer in another Internet Explorer windows and receives the following error: Runtime Error! Program: C:\Program Files\Internet Explorer\iexplore.exe abnormal program termination
As a work around, I installed Firefox on those user's machines. These users run Oracle Apps in Internet Explorer and run Discoverer in FireFox. This has solved the problem in 99% of the cases. However, there is one user who is having FireFox using Discoverer freeze when running Oracle Apps in Internet Explorer.
Can anyone provide any insight on how I can solve these conflict issues so users can run Oracle Apps and Discoverer at the same time?
Thanks in advance for your help,
CarlosHi Michael,
I agree with you completely. It is reccommended to run 10g on a separate physical server unless you have sufficient resources to run on the same server (which even most large clients do not) Even then, I would recommend a separate server.
I should have put my comment in context :-)
a.) I was only stating that it was possible
and
b.) whether 10g is installed on the same physical server or separate should not affect the client browser crashing issue that was posted.
I do have an install with EBS11i and Discoverer 10g on the same physical server and it works fine (this is sandbox/ TEST). Most of my large customers have 10g installed on multiple physical servers due to load balancing (capacity).
I do work for Oracle. I try to help out on the forum when I can, but it is hit or miss :-(
I would be glad to discuss anything privately.
As for the issue at hand, I can reproduce the problem and here is what is occuring.
I have EBS 11i configured with Jiniator 1.3.24
I have Discoverer 10g configured with Sun Java plugin 1.4.2_06
1. If you launch EBS 11i apps and a form with MS IE, then the browser launches the form using Jiniator JRE 1.3.xx (whatever you have configured in AutoConfig for EBS11i)
2. Next, the user navigates to EBS 11i SSWA and launches a Discoverer workbook.
What occurs is a child IEXPLORE.exe process is spawned from the parent IEXPLORE.exe process and Discoveer Plus is launched. The parent iexplore.exe process will be attached to the Jiniator JVM. Now if Discoverer is configured with
a.) Sun Java Plugin or
b.)a version of Jinitiator that is a different version from what EBS 11i is configured with
then you may get this conflict.
It really is an MS IE/JRE conflict with Jinitiator and Sun Java Plugi and the way the broswers attaches to the JVM (IMHO) as this behaviour could be reproduced with other non-oracle java applets.
You can workaround the situation by:
a. configure EBS11i and Discoverer to use the same version of Jiniator 1.3.xx
b. educate the users to open one MS IE browser to connect to EBS11i and then open a second MS IE browser to login to EBS11i SSWA or Discoverer 10g Plus directly to launch workbooks. They need to to this by clicking on the icon and not using File >> New browser. Clicking on the icon will spawn a new parent iexplore.exe process that can attach to a second/different JVM. File >> New Window will spawan a child of the parent.
c. As you did use two browser versions. MS IE for EBS11 connection and FireFox for Disocverer 10g connection.
I would choose optoin b, so that you can use Sun Java Plugin with Discoverer.
Open to any comments. I hope that helps you workaround the problem. The ideal solution is to have EBS 11i use/cerified with the 1.4 or 1.5 JRE. In poking around, I see there is a related post to this on one of Oracle's EBS 11i Product Managers Blog.
See:
http://blogs.oracle.com/schan/2006/04/18#a23 -
Insert and Delete at the same time?
Hi,
I have a dynamic list and dynamic form. When a person inserts a record using the dynamic form, I would like to delete a record from another table using a foreign key when the new record is added (assuming a record exists in the other table). Is this achievable, and if so, can anyone provide any help?
Thanks in advance for any advice provided.
GaryAs kendenny says, this appears to be a misunderstanding of how database transactions work.
As Hoek says, if it's an insert and delete on the same table, there is a MERGE statement that can help do that as a single statement.
However, you do not do an INSERT from one table and a DELETE at the same time from another table. But that doesn't matter, because that's the point of logica transactions on a database.
You perform your insert, which starts a transaction (if one isn't already started).
You then delete from your other table (which adds to the transaction)
When you're happy that both things are done, you COMMIT your transaction which then applies those changes.
If you're not happy with something you can ROLLBACK, and that will undo all the changes from the transaction.
So, the commit and rollback allow the changes to be applied as one logical unit, even though the changes are applied in multiple steps. -
My iPod is corrupt according to iTunes, however it won't restore through iTunes either. I've tried to reformat the drive. Makes no difference. I've tried to reformat after choosing disk manager, and again the same result. The iPod takes forever to work through the reformatting process and I get the same message "Itunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod" and then my pc tells me to format the disk.
It's so frustrating, is there a fix to this? It seems like the iPod could still function, but I'm missing the way to get out of this loop, please help me!Likely a hard drive fault, see the note that i wrote few years ago, hopefully it helps
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
How to use ActionListener and ItemListener in the same class
Why can't I use both ActionListener and ItemListener in the same Class?
I want to use a drop down list and an entry box on the same form.
How? I'm having trouble compling......
Thanks!
CODE:
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class Disp extends Applet implements ActionListener, ItemListener
{ TextField entry=new TextField(7);
Button Enter=new Button("Enter");
public void init()
add(entry);
add(Enter);
entry.addActionListener(this);
entry.requestFocus();
Enter.addActionListener(this);
public void actionPerformed(ActionEvent thisEvent)
String answer=entry.getText();Simply get your Applet to implement both ActionListener and ItemListener.
public class MyApplet extends Applet implements ActionListener, ItemListener
public void init()
itemWidget.addItemListener(this):
actionWidget.addActionListener(this);
public void actionPerformed(ActionEvent e)
System.out.println("ACTION PERFORMED!");
public void itemStateChanged(ItemEvent e)
System.out.println("ITEM STATE CHANGED!");
}Hope this helps.
Maybe you are looking for
-
My os is windows 8.1. I use firefox. I play facebooks farmville 2. It keeps asking me to install the new 3d flash player which is already installed. I've followed your steps and nothing has worked. I cannot play farmville 2 on firefox because of
-
Dear Adobe, I've got older systems, ones that can't handle CS6, and a budget too low to purchase a new system and your software even with a student discount. Is there any way to use an update version? I wish that all of the "Creative Suite[s] product
-
Pdf viewing and saving in Safari 6.0
When I open a document from a web site in Safari 6.0 that is a pdf, it opens at about 150% size and I cannot zoom out. Also when I go to 'save file as" and attempt to save it as a pdf the pdf saved can not be opened. I am getting an error message tha
-
Hi, From wiki page "Installing Arch Linux on a USB key" under Grub Legacy section it states I should edit menu.lst to change items to reflect what I am using - label, UUID etc. and to ensure the key is (hd0, 0). I am using the latest iso - 2014.01.05
-
I am getting a white apple screen with a spinning clock like logo-I can't do anything it just keeps spinning