REUSE_ALV_GRID_DISPLAY - in background - print problem

Hi all .
     I am using the function module REUSE_ALV_GRID_DISPLAY with a lot of fields in line .
     Result of report in case of on line running looks well , but I have problem with job in background :
           Part of the fields were transferred to additional line and report doesn't look good .
           How can I solve this problem ?
           Regards Helena .

To get the right format of output in the spool we generally increase the u201Cno. of columns fieldu201D in the Format typesu201D.
Sometimes even when we change this field, we get the output truncated at the end, like last few columns are not displayed. There is certain limitation for this field, so that even if increase this value again, we find no change in the output display in spool.
This value is effective only when we check the check box u201CNumber of columns from list display formatu201D in the SPAD transaction.
GO to SPAD Transaction code
In the menu Settings -> Spool System
In the others tab check the first check box in the Output Controller block, SAVE and exit.
Now Schedule the ALV report again by providing the output device and format, and then we get the full output in the spool
Hope it will solve ur problem.
Regards,
JOy.

Similar Messages

BACKGROUND PRINTING PROBLEM

Hi friends,
When i print zreport's output from forground its printing correcrtly.72(3).
When i run this report in background and if i print its not considering end-of- page 3 rows.
Continouisly printing .
Moosa

Hello,
Check the line count and page count.
... [NO STANDARD PAGE HEADING]
[LINE-SIZE width]
[LINE-COUNT page_lines[(footer_lines)]]
REPORT z_myreport LINE-COUNT 65(8) LINE-SIZE 132

Printing problem with emails - scaling issue

Hi everyone,
I'm having a printing problem when I print out my emails. Under the email preferences, the scaling is set to 100%, but the actual printouts look to be about 30%.
I have no other problems with any other applications (documents, web pages, etc.) and I'm not sure where to look next.
I'm new to the mac world (my background is with PC's), so any guidance at all would be GREATLY appreciated!!
(PS - I just updated my printer driver yesterday - had the problem both before and after that install)
Thanks in advance for your advice,
- wackylady
g4 Mac OS X (10.2.x)

bump -
any help?

SL - Pages & Printing problems

I have upgraded to SL. Since then my business logo doesn't print properly. It has a colored design with some gray scaled lettering surrounding it. When I select it and copy to another application such as : Word - it then has a black background as does Appleworks. (it wasn't created with a black background). - Copy to Preview prints perfectly. Pages where the document was created, prints with all the lettering in blue (supposed to be shades of Gray), and the artwork is not the right shade. It seems like this is more than a printing problem, since coping it to another app. changes its appearance also. Before SL, I could print, and copy to other apps with no problems. Please advise!

dan ol,
What kind of printer do you have?
Just trying to help.
Andrew

White backgrounds printing grey

Hello,
I am using CS 5.5 on a mac
Somehow, today I have managed to change the colour profiles and I can't figure out how to reset them. I don't usually adjust these profiles, but today I had printing problems with a HP printer and I adjusted them. This has made the problem much worse!
When I print, the white backgrounds print grey. If I close and open the document, it says not synchronised. I went to Bridge and selected one colour profile but it doesn't seem to have made much difference.
How can I get the settings back to how they were originally??!!
I can use Indesign at a novice level, but I rarely look under the bonnet!
Thanks for your help.

Background printing

I have been an avid user of Pages, but since moving to 08 I have had a lot of problems with background printing. First I think this word processing vs layout thing *****. I write a lot of menus and having all of the functionality together was good. On to the real problem. On my menus I have the name of our Bar with a rectangle shape behind it. The rectangle shape prints over the bar name no matter what I do. Page Layout or Word processing layout. I tried to make a text box and fill it but you can't fill it with gradient like you can do to a shape. Any help on this would be appreciated

Hi, Andrew,
I've had the same problem with estate agents adverts.
Here is how I dealt with this:
• in Pages file - make sure you "Send to back" your image (under Arrange menu) and uncheck "object causes wrap" in Wrap inspector
• instead of printing your menu straight from Pages convert first to PDF:
click Print to open Print dialogue window;
click on PDF at the bottom left corner;
choose 'Save as PostScript' - to desktop;
• drag and drop your huge PS file onto either Preview or Acrobat Professional.
After a few seconds you would get a tidy PDF (portable document format) file which should be good for printing on desk-top printers, sending out via email and even, if you use Acrobat Professional, for mass print-runs with professional print-shops.
Hope this helps
Sashura,
Normandy,
<edited by host>

Capture Noise Print (problem) - Soundbooth CS4

Hello,
I am having a "Capture Noise Print" problem with Soundbooth CS4.
I have 2 audio files:
File A (this is my noise print) I recorded a 4 minute file (.wav) of the ventilation system.
File B (this is the audio file that I want to improve: I want to remove the background noise of the ventilation system.
Q: How can I remove the background sound from File B using the noise print from File A?
I can only achieve this when both sounds are on the same file. Soundbooth CS4 doesn’t let me do this process when there are on separate audio files...(the box for "Capture Noise Print" is grey and cannot be selected)
Thanks for your time.

I have the exact same problem... I do this..
1. Select 5 seconds of silence
2. Click Capture Noise Print
3. Select select a silent area
4. Click Noise..
5. Click "Preview".. whether On/Off buton is on/off, AND with Use Capture Noise Print selected, I hear no reduction. Even at 100%/3dB
If I uncheck the "Use Captured Noise Print" option, then noise is removed, but I get the robotic voice
CS5 latest updates.
Any ideas?
TIA
EDIT:: Interesting.. closing SB, then reopening seems to resolve the issue. Every so often it does the same thing, so I have to close/reopen SB.

Photoshop Printing Problems

Recently my photoshop has had printing problems. Whenever I print in rgb it has a blue tint - everything that should be white is blue - even the totally white background. I have to change to cmyk to get an accurate print. Why did this just start and how can I fix it? Often I have customers submit pictures to resize and print. I am getting better at remembering because so many have come out blue - but I often don't remember to switch to cmyk before printing. Then I have to print it over.
Need some input on this if I can get it.
Thanks.

screenshots of your workflow are likely your best approach here, and it may be useful to at least note what printer & operating system are giving you the grief...
you want to use the specific profile for your printer/paper/ink setup
this is for PHOTOSHOP PRINTING CS6
i recall that link notes a known bug for Photoshop printing blue or cyan in the white area, but you may want to add Chris Cox to your key word searches because he has explained the issues in detail here many times...

Airport Extreme Printing Problem with HP Deskjet.

Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4 Mac OS X (10.4.4)

Hello jds17. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations.
Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

Crystal report printing problem in Malayalam

Hi,
I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
please help me...!!!

Hi priyashekar,
I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Print problem. trying to print a document in Preview, the start of the text prints half way down the page not at the top of the page?

Print problems. Printing out an email the text starts half way down the page. I tried taking a picture of the text I wanted to print, tried to print from Preview and have the same problem. If anyone has any ideas I would really apreciate it. Thanks Penny

One more thing to check: System Preferences/Print & Scan. Make sure your printer is set as Default.
I'm using OS X 10.8 and I don't see Page Setup anymore. If you have access to Page Setup, check to see if there are any adjustments to make there.

Supress Background Print parameters when user executes ALV report by F9

Hi friends,
How can we Supress Background Print parameters pop-up, when user executes ALV report by F9
or by navigation from selection screen -i.e; Program ->>Execute in Background.
Please guide me
Thanks in Advance,
Ganesh

Sorry,
i need to supress the POP-UP which asks for background Print Parameters in the ALV report. when i press F9 in a selection - screen of a Tcode
as we supress Pop-up for a smartform or script by passing the Print Parameters
This 'RS_SET_SELSCREEN_STATUS' excludes the commands(say F9 function code) in report
I think we need to set the Print paramters in the Program
please guide me
Thanks,
Ganesh

My "fix" to print problems in LR (using MS XP)

Having had the same problems printing from LR as many others are complaining about, I thought that I might give my 2 cents to what I did to solve (?) the problem. I have to run with current setting in a while to be convinced that it is not just an intermittent fix though ;-)
My problem when printing from LR was that the print came out much too Cyan-Green and somewhat dark when color management where handled by LR. When the same photo was exported to PS Elements (PSE) in Tiff with the Pro-photo color profile embedded, adjustments from LR, and printed using the same driver setting and color management, the print came out fine.
I must mention that I have had fine printout in previous LR versions but I'm not sure when the problem started. But at least from LR version 1.3, 1.3.1 I have had problems printing a proper print.
As I'm not 100% sure what caused the fix, I don't want to leave much info un-documented, so I start by describing my system etc.:
- Athlon 64 3500+ with 2 GB RAM
- Lacie 119 LCD monitor (calibrated with a ColorVision Spyder 2)
- Epson Stylus Photo 890 printer; an old (6-7 years) 6 color dye-sub printer, but it can still produce very good prints. (It is BTW, the A4 printer version of Epson 1290).
- Microsoft XP service pack 2
- Adobe Photoshop Lightroom 1.3.1.
- Adobe Photoshop Elements 5
- Latest Epson 890 printer drivers ver. 5.21/P (from 2004)
- ICC profiles for various Epson printer paper
- Paper used: Ilford Printasia Photo Glossy Paper (but I have tried Epson Premium Glossy Photo Paper as well with same results)
I used following setting:
- In printer driver: "No color management" was selected
- LR and PSE color management; printer profile: Epson Stylus Photo 890 Premium Glossy Photo Paper, Rendering Intent: Perceptual
. LR Print sharpening: High
- LR Print resolution: 360ppi
When the photo was opened in PSE and I had printed a small print with above mentioned printer driver/color management settings. The print looked good, but with a little magenta color cast, so I thought that if I used a different printer profile this might help (I have no ICC profile for the Ilford paper). So I chose the "Epson Stylus Photo 890 Photo Paper" instead and printed again, and this time the photo looked as it did on my calibrated monitor. I have to admit I was a bit delighted even though it was from printed from PSE and not from LR, but seeing that color management worked in other applications was a relief.
In PSE, I also I tried changing to a different Rendering Intent before changing printer profile, but with no success.
Another thing that helped further was to change Media Type in printer driver from "Premium Glossy Photo Paper" to "Photo Paper".
After the print success in PSE I went back to LR and changed the Printer Profile to "Epson Stylus Photo 890 Photo Paper" (still with "No color management" and "Photo Paper" selected in printer driver) and printed the photo again. Now the photo looked as good as it did in PSE (!!!???).
Now I have made a few printer preset in LR for various print sizes, and the prints look fantastic. Every time! Do I have to mention that I am a happy guy ? :-)
BTW, remember that a printer preset also saves the printer driver settings. Forgetting this can easily cause some unexpected results.
The only thing is that, I still do not know what fixed the problem, and I am a bit worried that the problem might come back again. Maybe the print related changes made in PSE and the following selection of the same settings in LR did - somehow - "synchronize" LR to a proper color management. Sounds weird, but if it works...
I hope this long explanation was useful to - at least - some of you, who experience printer problems in LR. LR is a fantastic application, and I enjoy using it, but the printer problems has really been frustrating.
Good luck!
/Per

Little unclear about the border thing- you say it prints with a too wide border, but also say:
When I print the image with this set up, it still is printed without a border.
It's a factor of your printer, though; some can never print without a margin around all sides; this can be a border, or cut off. Good news, though; you can have a 5 x 7 borderless, or with any size border you wish if you print on larger paper, and trim to taste.

REUSE_ALV_GRID_DISPLAY - in background - print problem

Similar Messages

Maybe you are looking for