REUSE_ALV_GRID_DISPLAY IT_FIELDCAT change after I_CALLBACK_USER_COMMAND

Hi. I changed the FIELDCAT after I_CALLBACK_USER_COMMAND, but the same fieldcat is displayed. The internal table can be changed, but not the FIELDCAT? I'm adding comments column after update... Can this be done?

Use the FM REUSE_ALV_GRID_LAYOUT_INFO_SET to set your new Field Catalog. Use the FM REUSE_ALV_GRID_LAYOUT_INFO_GET to get the current Field Catalog information, change it as per the requirement and than use the FM REUSE_ALV_GRID_LAYOUT_INFO_SET to set the new field catalog back.
Regards,
Naimesh Patel

Similar Messages

  • Schedule line date changes after each MRP run

    Dear Experts,
    Clarification needed on how the system plans the MM schedule lines.
    Setting: Start in the past not allowed.
                  3 days for processing of order
    The issue is after each MRP run the system is moving the schedule line to the current date + 3 days for processing + the planned delivery time.
    If the schedule line is not firmed, after each MRP run ( which happens everyday) the system is moving the schedule line and then giving an alert saying the " order has to be rescheduled to the previous day"
    on the second day after the mrp run the system moves the schedule line again by one more day and gives the rescheduling date as " -2 days from today"
    this change is happening every day after the planning run. - because of this there are really no backorders ( schedule line in the past ) in the system. we were not able to know if the vendor is actually delayed in this case.
    can you kindly suggest what went wrong here ??
    we are using strategy 10 for the planning of procured parts. Let me know if more info is needed.
    Note: we are also using stock transfer process for some procured parts. there too the PR date gets changed after each MRP run. There there is no lead time in this case. the order is placed on the same day as the requirement as both plants are nearby. There the PR date is changing everyday to the current date.
    your advice would be of great help
    thanks
    Nagendra Kumar

    Hi Caetano,
    thanks for your suggestion
    Yes, we use firm zone for few of the vendors. there the system don't change the schedule lines.
    Also for the stock transfer PR's there is no firm zone and the lead time is one day. in this case it changes everyday after the MRP run.
    the stock transfer PR's leads to the creation of Schedule lines from the source plant. Since this PR gets changed everyday. the alerts coming out of MD07 gets changed and we really did not know if this order is delayed or not.  In the source plant we use the firm zone to avoid moving the schedule line. But then the alerts are always not correct.
    is there any setting which helps in not moving the PR everyday without using " start in the past"
    thanks
    Nagendra Kumar

  • Address data changed after invoice is created

    Hi,
    I've a problem to solve and it's related with data changed after invoice is created.
    The scenario is the follow:
    1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
    2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
    3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
    I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
    And, I can't edit this kind of data on invoice creation because it must be done at order level.
    So I don't understand why it happen, but it happen on more than one client.
    I'll hope that anyone can help me to solve this issue.
    Kind regards,
    Nuno Rodrigues

    Hi Nuno,
    the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
    If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
    If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
    Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
    But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
    Hans

  • When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

    When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

    Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
    You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
    // Get the icon from the b3 button
    var oIcon = getField("b3").buttonGetIcon();
    // Get  reference to the b0 button
    var f = getField("b0");
    // Set the icon of the b0 button to the icon retrieved from the hidden button
    f.buttonSetIcon(oIcon);
    // Show the b0 button
    f.display = display.visible;
    This code would go in the Mouse Up event of the smaller button.

  • Purchase order rate change after creation of gr.

    In t- code ME22N PO line item Rate change is possible after creation of GR against that line item.
    We want to restrict the po line item rate change after creation of goods receipt against that line item.
    Please suggest.

    solution 1 : Do not give authorization for ME22
    solution 2 : Grey out price chage , it should only be possible thru info records, and give authorization of info records in secured hands.
    You should not totally restrict price change after GR because there are possibilities that you might require to change rate after goods receipt also. In that case you have to change rate and then have to give restrospective effect to GR.
    try above 2 solutions which are simple

  • On Mac. Colours changed after switching to 64bit mode (ver 2.7)

    Been using Lightroom 2.7 on my iMac quite happily and after reading a few articles realised it wasn't running in 64bit so changed it.
    Now colours are all out, most noticeable on reds:
    Before change
    After Change
    Any ideas why this is happening?
    Tried changing back to 32bit and still the same so something has changed.
    Thanks
    Andrew
    P.S Posted this on another forum and just to clarify here also, whilst the above are exported jpegs, these are used purely for illustration. The colour change is happening within lightroom itself, not on export.

    After some advice elsewhere it seems I have 'lost' some of the camera calibration profiles.
    I only have ACR3.1 and ACR4.4 listed and checked on another machine I used I normally have it set to Adobe Standard.
    So, how can I get the profiles back?
    OK. Problem solved. Reinstalled Lightroom.
    Usually fixes things

  • I recently upgraded from Leopard to Snow Leopard and I noticed that I have more capacity available on the Macintosh HD. I checked my files and applications and they are still on my computer. Can capacity on the HD change after an OS upgrade?

    I recently upgraded from Leopard to Snow Leopard on my MacBook and I noticed that I have more capacity on the Macintosh HD than before the upgrade. I checked my files and applications and they are still on my computer and nothing appears to be missing. Before the upgrade I had around 111 GB capacity with around 10.50 GB available on the Mac HD but now after the upgrade I have 119 GB capacity and 20.92 GB available. Can capacity on the HD change after an OS upgrade?

    No, but the upgrade removed unneeded PowerPC code and changed the way free space is determined.
    (72071)

  • Video Scope reading changes after render

    I'm having problems with my wave form monitor changing after I've rendered video. I applied a proc amp filter to a video clip and made the adjustments that I wanted according to the levels on the wave form monitor. After I render the clip, I notice the levels revert back to the old readings on the wave form monitor, but the actual numerical values set in the proc amp filter seem to remain the same. Also, as far as I can tell the actual video is not effected and still has the proc amp settings applied to it. Any idea what may be causing this?

    Try changing your render setting. Go to the Video Processing tab in the Sequence Settings and change it from Render in 8-bit YUV to Render all YUV material in high-precision YUV. I had what sounds like a similar problem where I color corrected a clip with the 3-way, but after I rendered the black level jumped back up about 5 points. Switching to the high-precision settings fixed it. That might work for you.
    Hope that helps.
    jesse.

  • How do I stop my original photo from changing after I edit then save it in Raw 7

    How do I stop my original image from changing after I save the edited version in Camera Raw 7. I want to be able to keep the original intact and
    also have the edited version. Also, if I want to work the new edited version in the future I would want to also keep that old version.
    Thanks for your help

    Thanks for this great solution NoelHave a great day and weekend
    Re: How do I stop my original photo from changing after I edit then save it in Raw 7created by Noel Carboni in Photoshop General Discussion - View the full discussion Another way to revert all the saved metadata changes back to defaults is to select the Camera Raw Defaults entry in the Camera Raw fly-out menu... http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6070597-543394/362-482/RevertS ettings.png  -Noel

  • PO Release Strategy not changed after deletion of few line items with less

    Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
    Dear Friends
    We have issue with PO Release strategy. We have created the PO. with release strategy  with multiple approvers.  After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong. 
    Details of the PO
    PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
    PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
    Are there any OSS notes available to correct his bug.
    Please let me know if you need more details
    Thanks in Advance
    Thanks
    MVS

    Hi,
    release indicators  change it to 4.It may works. Please explore to all 6 indicators..........
    i.e,
    1-cannot be changed
    2-changable,no new determination of strategy
    3-changable,new release in case of strategy
    4-changable,new release in case of strategy or value change
    5-changable,new release if new strategy/outputted
    6-changable,new release if new strategy or value changed/ outputted......
    And check   Characteristic description and value in Classification  of Release strategies ........
    I hope this will help you. Thanking you.
    Regards,
    Venkat.

  • Getting no attributes changes after change run monitor program is executed

    Hi ,
    We have a z-program where we are calling function module RSDDS_CHANGE_MONITOR . The structure of this function module is changes after upgrade from  BI 3.5 to 7.0. Accordingly i have adjusted the z-program . But the result is No Attribute Change Run Found .
    The function module called  is as follows
    CALL FUNCTION 'RSDDS_CHANGERUN_MONITOR'
    EXPORTING
      I_WITH_DETAILS           = RS_C_TRUE
      I_T_CHABASNM             =
      I_T_HIEID                =
       IMPORTING
         E_TS_STATE_CR            = l_cr_state
         E_TS_CHANM_IN_AGGR       = l_t_chanm
         E_TS_HIER_CR             = l_t_hieid
       E_TS_CHABASNM_CR         =
         E_T_AGGREGATE_CR         = l_t_aggrstate
       E_TS_TREXAGGR_CR         =
         E_TSX_MSG_CR             = l_t_msg
       EXCEPTIONS
         ERROR                    = 1
         OTHERS                   = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    The l_cr_state has the details of the status in BI 7.0
    But after upgrade , its empty.
    Pls help on the issue.
    Regards,
    Sarang

    go through this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/64/32a5682e6a4e0cbb3f8a33970d11a8/frameset.htm

  • CS5 indd files occasionally change after saving and reopening

    Occasionally the contents of my InDesign document will change after saving and re-opening.  No errors reported during the save however when the file is opened a text box may be out of place or leading may be messed-up on a few random pages or some of the recent changes may not have been saved.  Any ideas?

    There was no direct indication that you created the code in a standard module. I asked because you reported that the code works in the sample workbook that you downloaded but not in your own workbook.
    I don't know what else to suggest at the moment.
    Could you create a stripped-down copy of the workbook (without sensitive information) and make it available through one of the websites that let you upload and share a file, such as Windows Live SkyDrive (https://skydrive.live.com),
    FileDropper (http://filedropper.com) or DropBox (http://www.dropbox.com). Then post a link to the uploaded and shared file here.
    Or register at www.eileenslounge.com (it's free) and post a message in the Excel forum. You can attach files up to 250 KB to a post there (zipped if necessary).
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Screen resolution changes after opening PDF in preview and is enlarged.

    Screen resolution changes after opening PDF in Preview and is enlarged.

    Do a backup.
    Quit Preview.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Remove the following. You may not find them all.
    Containers/com.apple.Preview
    Preferences/com.apple.Preview.LSSharedFileList.plist
    Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
    Saved Application State/com.apple.Preview.savedState
    Credit Linc Davis  for this solution.

  • Font changing after upload

    I am having a problem with a swf file that we are using for a
    splash page for a bands website. It is a simple page with some
    audio and two links. The problem I'm having is the font and the
    sizing of things changed after they were uploaded to the server. I
    tested the file with two different browsers before e-mailing it to
    the production company, and everthing worked fine. Any help would
    be greatly appreciated!
    thanks
    -g

    Hi
    This is a very common problem and very easy to fix.
    The problem is that the font your using is not available on
    the machine(s) being used to view the webpage.
    To get round this problem all you have to do is select the
    items in the Flash IDE individually and select Embed
    Choose Uppercase. Lowercase, Numerals and any special
    characters you need.
    Republish and hey-presto Browser content correctly
    formatted.

  • Display colo change after bootup

    I have a G4 IBook whose colors change after boot is complete, contrast & brightness go haywire after a few seconds, I have to go into a game to reset the settings , then exit the game and all is fine until I boot the next time ,then it is the same drill
    IBook G4 1.42mhz, Nvidia Gforce 9550 video card   Mac OS X (10.4.9)   tried adjusting display colors,no luck there either, could this be a video card driver problem?

    Open the Universal Access pane of System Preferences, click on the Seeing tab, move the contrast slider all the way to the left, set the monitor to Black on White, and turn off the other checkboxes except for the one which controls access for assistive devices, the state of which doesn't matter.
    (22141)

Maybe you are looking for