REUSE_ALV_HIERSEQ_LIST_DISPLAY - comment per header entry

Hi ABAP Gurus,
Good day.
I'm using REUSE_ALV_HIERSEQ_LIST_DISPLAY to display header and item data. I would like to ask how to add comments above per header entry. I would be adding customer details in the comments per header. If possible, can you please provide a sample code? Thank you.
Best regards,
Brando

Hi
I think you can only to use the TOP-OF-PAGE event, but that mean your alv print will be broken at every new header, i.e. every new header will be printed in a new page
Max

Similar Messages

Error: No %%BoundingBox: comment in header!

When we attempt to print a jpg or psd file we get the following error: error: No %%BoundingBox: comment in header!
Am in a computer lab setting using intel iMac, OS 10.5.4, CS3 Photoshop along with an HP5200tn NETWORKED laser printer. All updates have been loaded as they became available so all is up to date.
No printing problems other than in Photoshop.
Called Adobe and they say it is not their problem/fault. Called HP and they blamed adobe. Meantime, I DID get prints by clicking on the old "open using rosetta" in Photoshop but wonder what new problem THAT solution will cause. Plus, I resent having to use rosetta with nice new macs with up-to-date software and drivers. We do not have any gimp drivers installed nor any sketchy software.
Can anyone offer any viable suggestion. Thank you in advance.

Long story short. This " No %%BoundingBox: comment in header! " problem showed up on my Brother MFC-8640D. After hours of troubleshooting, I found the problem. As indicated in this thread it is a Postscript issue. Somehow, Mac OSX switched from a the "CUPS" version of the driver in OSX to the Postscript version, thus communicating with Photoshop that it is a Postscript printer, which it's not, so Photoshop ends up printing code instead of the print.
Solution: Follow these instructions. Should be the same even if your printer is not a Brother.
First, uninstall the printer driver:
http://welcome.solutions.brother.com/BSC/public/us/usot/en/faq/faq/000000/000300/000014/faq000314_003.html?reg=us&c=us_ot&lang=en&pro d=mfc8640dus&Cat=
Second, reinstall the printer driver:
http://pub.brother.com/pub/com/pdf/macosx/mac105driver_ipd.pdf
Follow the instructions and make sure you install the "CUPS" driver, not the "Postscript" one.
Restart and all your prints should now print normal. I get the same override warning on postscript that one gets using a photo inkjet because now the OS knows your printer is not a postscript model. I can't believe Adobe and others didn't just come up with the solution. Crap, it took me hours of investigation and trying all these work-a-rounds (some worked, but added additional steps and greatly increased the load and print time, sometimes by 500% or more....too slow).
How the driver is OSX changed over from CUPS to Postscript, I'm not sure, but a while back I reinstalled the scanner driver and may have done something? Anyways, this solves the real problem. No need for all the other time consuming work-a-rounds.
Good Luck

Business Objects and Adobe / Application to add comments per report line

Good day,
Is it possible to use a Business Objects report output and post it into Adobe forms? We would like to use a report output and allow users to comment per report line - online - or is there any other application in Business Objects which will make this possible
For Example:
Report Line Comment
Sales 9999.9999 ______________________________________
Expenses 99999.99 ______________________________________
Thank you.

Hi,
I would suggest you post your question into the corresponding BusinessObjects client tool forum.
Ingo

No %%BoundingBox: comment in header!

I get this message in my printer queue when printing from PS CS3 on a new MacPro running 10.5.7. This happens when printing either to an Epson 4000 run by Colorburst or to my little HP Laser.
I've searched the forum already and found some discussion of this problem, but no definitive solution.
I've upgraded from 10.5.6 to 10.5.7, tried printing various file formats, reinstalled printer drivers etc. with no luck.
Any insight appreciated.
Leo

Long story short. This " No %%BoundingBox: comment in header! " problem showed up on my Brother MFC-8640D. After hours of troubleshooting, I found the problem. As indicated in this thread it is a Postscript issue. Somehow, Mac OSX switched from a the "CUPS" version of the driver in OSX to the Postscript version, thus communicating with Photoshop that it is a Postscript printer, which it's not, so Photoshop ends up printing code instead of the print.
Solution: Follow these instructions. Should be the same even if your printer is not a Brother.
First, uninstall the printer driver:
http://welcome.solutions.brother.com/BSC/public/us/usot/en/faq/faq/000000/000300/000014/faq000314_003.html?reg=us&c=us_ot&lang=en&pro d=mfc8640dus&Cat=
Second, reinstall the printer driver:
http://pub.brother.com/pub/com/pdf/macosx/mac105driver_ipd.pdf
Follow the instructions and make sure you install the "CUPS" driver, not the "Postscript" one.
Restart and all your prints should now print normal. I get the same override warning on postscript that one gets using a photo inkjet because now the OS knows your printer is not a postscript model. I can't believe Adobe and others didn't just come up with the solution. Crap, it took me hours of investigation and trying all these work-a-rounds (some worked, but added additional steps and greatly increased the load and print time, sometimes by 500% or more....too slow).
How the driver is OSX changed over from CUPS to Postscript, I'm not sure, but a while back I reinstalled the scanner driver and may have done something? Anyways, this solves the real problem. No need for all the other time consuming work-a-rounds.
Good Luck

When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks

When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks. I used to be able to do this in WORD 2003. I tried to create a PDF from Acrobat by selecting File > Create PDF >navigate to the WORD file > select three checkboxes >
Any help with getting the TOC heading entries as hyperlinks?

Try to do it from Word using the ribbon.

No %%Bounding Box: Comment in header!

Hi,
Since I recently upgraded to 10.4.9 I am encountering problems with printing. Some seemed to be related to outdated printer drivers and things then worked well for some time. However, since two days ago, I am always getting an error message when printing to an HP LJ 1200:
"No %%Bounding Box: Comment in header!"
The printer has been installed via HP JetDirect/IP-Printer. I am getting the same error message when printing from any application; Word, Adobe, Camino, etc, and when printing the preview. Documents are not sophisticated, just plain text and figures.
I reinstalled the printer, with no avail. If the printer creates some output, it takes a very long time and the printout then consists of three to four lines of numbers and letters.
I do not have problems (yet?) when printing to a Lexmark C510; everything works fine. So, printing is not completely disabled, fortunately.
It seems that others have encountered the same problem, and there was a similar thread (unsolved though) in the Tiger discussion group. I really would be grateful if somebody could provide me with a tip how to solve this problem.
Second, in the System Settings - Sharing, I can not disable Printer Sharing. Clicking in the box or the Stop button has no effect. The same is true for Print&Fax; I can uncheck the first box (share printer with other computers), but when I reopen, the box is checked again.
Any helpful hints will be appreciated!
Jens
iMac G4, 1.25 MHz, 768 MB Mac OS X (10.4.9)

Exactly the same problem and error message w/ my HP LJ 1015(network printing from Mac to WinXP).
greg: how to re-update the combo update? I have downloaded the standalone comobo update from Apple website, do I need to go back to 10.4.8(if so how?) then install the combo update or it'll be fine just install the downloaded update on the current 10.4.9 system? Thank you.

Commented Page Header Extension?

I'm looking for an extension that creates a new panel group
in Dreamweaver w/text boxes for inserting a Commented page header
containing Author, File Name, File Create Date, Version, and file
update notes. Does anyne know where I can find it? I've been
digging with no luck.
Thanks

Hi Osman
Try and see if increasing the size of the "Title" boilerplate solves your problem.
Regards
Sripathy

How to count the per group-entries and put them in the new table

Hello Guru,
I want to sort the table cdhdr.
for example :
SELECT objectclas objectid changenr   *******
INTO TABLE cdhdr_data
FROM cdhdr
WHERE ( ********) AND
        objectclas = i_objectclas
The problem that I need to order the table by objectclas and objectid.
Let say objectclas is always MATERIAL.
Let's assume our key is changenr. May be our key will change to "objectclas objectid".
So, my problem that I need to get the number of the same "objectid" with different "changenr".
And also I need to put the count number of each object id with different changenr in the table cdhdr_data.
For example
objectclas        objectid       changenr      count
MATERIAL      00***001      1                   3
MATERIAL      00***001      4                   3
MATERIAL      00***001      7                   3
MATERIAL      00***005      2                   2
MATERIAL      00***005      6                   2
MATERIAL      00***003      5                   2
MATERIAL      00***003      3                   2
So later I'm going to use it.
LOOP AT cdhdr_data FROM sy-tabix TO ( sy-tabix + cdhdr_dat ( sy-tabix ) + count - 1 )
some optimized cdpos processing
IF entry found.
*don't loose time
*change the boundery
sy-tabix = count
ENDIF.
ENDLOOP.
Best Regards,
Kais

Hi Marcin,
Thanks for replying.
I'm having a trouble.
Let say I got an error on insert into ****.
It says me that the object (i_)cdhdr_data is not known.
Why, should I avoid to put objectclas = i_objectclas there.
I need to have MATERIAL OR DOKUMENT.
I can't just put 10000entries like that.
I'm also sceptic about how much this operation will cost.
Because I need to proceed the data with cdpos.
And This's why I'm doing that.
Later with this implementation I'm gone use LOOP AT *** FROM sy-tabix TO ****.
If I use my method, it will cost lower than inserting, changing, ...
I rather ignore the objectid and don't make any processing.
But with your solution I can say its rapidly.
Let assume there's n entries in cdhdr and m entries per n in cdpos.
So my algorithm will select n entries and will follow n*m entries but some of them will be proceeded an other not.
in cdhdr :
for n entries : n * 1 selecting
in cdpos :
always : n*m comparing,
processing between : n1 - nm
With you algorithm we will do :
in cdhdr :
for n entries : n* (1 selection + 1 modifing + 1 appending) <=> each operation cost O(1)
in cdpos :
for comparing between : n1 - nm
processing between : n1 - nm
Let see the middle value :
your case :
in cdhdr we have : n * O(3) ~ n * O(1) ~ O(n)
in cdpos :
O(c(nm)/2) + O(p(nm))2) ~ O((cp)((nm)/2)) ~ O(d(nm)) d= (cp)/2 ~ p/2
we know that O(c*n) ~ O (n) ; c ist a constant
c : comparing cost
p : processing cost
p >> c
my case :
in cdhdr we have : n * O(1) ~ O(n)
in cdpos :
O(c(nm)) + O(p((nm)/2)) ~ ? maybe O(d(nm)) d = c + (p/2) ~ p/2
c : comparing cost
p : processing cost
p >> c
Ok, this in theorie, but in reality I've no idea.
Is there a mathematician there ?
Regards,
Kais
FORM get_cdhdr_data_modified_1
USING
    i_from_date TYPE dats
    i_from_time TYPE terf
    i_to_date TYPE dats
    i_to_time TYPE terf
    i_objectclas TYPE j_objnr
CHANGING
    cdhdr_data TYPE SORTED TABLE.
types: begin of t_cdhdr_data,
            objectclas type cdhdr-objectclas,
            objectid type cdhdr-objectid,
            changenr type cdhdr-changenr,
            count type i,
      end of t_cdhdr_data.
DATA : i_cdhdr_data type table of t_cdhdr_data with key objectclas objectid changenr with header line.
DATA: st_index LIKE sy-tabix, count TYPE i.
SELECT objectclas objectid changenr
INTO TABLE i_cdhdr_data
FROM cdhdr
WHERE ( ( udate GT i_from_date AND udate LT i_to_date ) OR
          ( udate EQ i_from_date AND udate NE i_to_date AND utime GE i_from_time ) OR
          ( udate EQ i_to_date AND ( udate NE i_from_date OR utime GE i_from_time ) AND utime LE i_to_time )
        ) AND
        objectclas = i_objectclas.
INSERT INTO i_cdhdr_data FROM i_cdhdr_data.
ENDSELECT.
LOOP AT i_cdhdr_data.
AT NEW objectid.
    "remember start position
    st_index = sy-tabix.
endat
at end of objectid.
count = sy-tabix - st_index + 1. "count accual position
cdhrd_data-count = count. "now you have how many entries are in each objectid
MODIFY TABLE i_cdhdr_data FROM i_cdhdr_data.
ENDAT.
ENDLOOP.

Display of 2 General Ledger Accounts per Accounting Entry

Hi Experts,
We have been searching for the right program to use in showing the GL Accounts of each entry.
For example, we have to see the Expenses for Water and we also have to know the Withholding Tax used for each entry of the whole year.
We have to generate the total Withholding Tax we have withheld per Expense so we need both of the GL Accounts.
Kindly help us as we are trying to validate all the amounts we have provided the Bureau of Internal Revenue.
Thank you very much and we highly appreciate your replies.

Hi All,
The issue above has been posted by our consultant as a client we would want to elevate further.
Due to such an functionality; to uncheck the monthly / daily subtotal in a GL for one whole year of records takes up 30 mins!!!
It is weird why such a small issue has not been taken care of in such an advance system like SAPB1.
Would appreciate if this matter is taken up by the SAP development team; and we are reverted with a solution at the earliest.
Regards.
Edited by: Vishal Attal on Apr 30, 2009 11:11 AM

Start a new page per table entry

The interface is simply a table. There are 2 sub-tables with unlimited rows in the table. This makes the length of an entry flexible. Typically one entry holds 1~2 pages.
Now for each table entry (or table row), we need make it start a new page. The best result I got so far is to set Table's "After" property to be Go to Next Content Area. But the problem is that there is always a blank page in the end. I use LCD 8. Please advise how to set pagination. Many thanks!

Hi,
If you create a report with style called Group above or Group left. Specify Col1 as your group column. Set the property "Maximum Records per page" to 1 for the parent repetating frame for Col1. It will work.
All the best

Making comments on blog entries?

How do you allow readers to comment on your blog entries? So that others can read their comments?
Thanks!

Have a look here (you would have found it with a short search ;-)):
-> http://web.mac.com/cbrantly/iWeb/Chad/Blog/8952037B-38C8-4241-BB1B-2968605FBEDD. html

Header value in fact to be summed once per header

I have two table, one containing information about the produced quantity and the other containing information about the ingredients used to produce such quantity (in the header), what I need is to display the produced quantity beside each ingredient, this works fine, but when I exclude the ingredient the number is multiplied by the number of ingredients I have for each header
SAMPLE DATA:
HEADER TABLE
HEADER_ID PRODUCT_ID QUANTITY
1                    1                         5
DETAIL TABLE
LINE_ID HEADER ID INGREDIENT_ID QUANTITY
1               1                    2                         10
2               1                    3                         15
SAMPLE REPORT
PRODUCT QUANTITY
1                    5
But the result I get is 10 because there are two lines of details, what I want is to calculate the quantity once for each header then sum otherwise, any ideas?

The problem source lies precisely where Gianni Ceresa mentioned: In the construction of your business model with regards to the effective content and content levels of your logical table sources.
Unless that's correct you won't be able to get useful results for your request.

SOAP adapter and BizTalk specific header entries

We are trying to implement a B2B scenario using XI 2.0 and the SOAP adapter (J2SE). The customer is using BizTalk. My question is if it is it possible in the SOAP adapter to include BizTalk-specific

Hi Stefan,
I have a scenario in which I want to call an External WebService from SAP XI 3,sp10. An SAP RFC Is the SENDER.
After doing the config I see 2 failed messages in MONI everytime. I do not see the soap header in the message. The error is -->failed to reach the end point.
I want to see if I am passing the Header correctly.A
Also most important I need to have a Authentication tag in my header tag which seems to be specific to 3rd party system hosting the webservice.
I want my SOAP Header to have :
          <s:AuthenticationInfo>
                <s:userName>webuser</s:userName>
                <s:password>XXXXX</s:password>
           </s:AuthenticationInfo>
When using the SOAP Receiver channel I expect XI to put this but does not look like its doing the job. Anyways the s: tags above are custom tags with custom namespace. How do I add in the SOAP Header ?
Thanks
Ashish

Restore Comments in blog entries?

Had some mess with iWeb 2.x and returned to iWeb 1.x
Now all blog comments are gone. Is there any chance to restore them?
Thanks, willi

Does anybody know how the comments are stored in iWeb 2.0? And even better: how in iWeb 1.x? I would like to restore them from 2 to 1.
Your help would be very appreciated. Thank you.

How many times should autosuggest fire per user entry?

Here's my autosuggest tag code:
<cfinput type="text"
name="partnername"
autosuggest="cfc:get_partnername.lookup({cfautosuggestvalue},{SOURCE})"
size="35"
maxResultsDisplayed = "1000"
autosuggestminlength = "2"
align="left"
style="z-index:1000;"
autosuggestbinddelay="1"
required="yes"
tabindex="0">
Here's the result from the ColdFusion Ajax Logger:
info:http: CFC invocation response: ["SAFARI
MICRO","SALTSPRING SOFTWARE","SANDIRECT","SANITY SOLUTIONS","Sanity
Solutions, Inc.","SANSTOR, LLC","SANZ","Savoir-Faire Solutions"]
info:http: HTTP GET
get_partnername.cfc?method=lookup&returnFormat=json&argumentCollection=%7B%22search%22%3A %22sa%22%2C%22SOURCE%22%3A%22US%22%7D&_cf_nodebug=true&_cf_nocache=true&_cf_clientid=DDF9F E40849174E98711713980BB387B&_cf_rc=1
info:http: Invoking CFC: get_partnername.cfc , function:
lookup , arguments: {"search":"sa","SOURCE":"US"}
info:widget: Fetching data for autosuggest id: partnername ,
current value: 'sa'
info:http: CFC invocation response: ["SAFARI
MICRO","SALTSPRING SOFTWARE","SANDIRECT","SANITY SOLUTIONS","Sanity
Solutions, Inc.","SANSTOR, LLC","SANZ","Savoir-Faire Solutions"]
info:http: HTTP GET
get_partnername.cfc?method=lookup&returnFormat=json&argumentCollection=%7B%22search%22%3A %22sa%22%2C%22SOURCE%22%3A%22US%22%7D&_cf_nodebug=true&_cf_nocache=true&_cf_clientid=DDF9F E40849174E98711713980BB387B&_cf_rc=0
info:http: Invoking CFC: get_partnername.cfc , function:
lookup , arguments: {"search":"sa","SOURCE":"US"}
info:widget: Fetching data for autosuggest id: partnername ,
current value: 'sa'
info:widget: Creating window: 830591398
info:widget: Selected tab, id: orginfo in tab container, id:
cf_layout1209077371319
info:LogReader: LogReader initialized
info:global: Logger initialized
I make a single 2 character entry and the results shown in
the log above get delivered immediately. It's clearly firing twice.
Doesn't matter what I set the binddelay: default, 1, 2, 10....it
fires twice. I hope I'm not exposing my ignorance on how all this
AJAX stuff works, but shouldn't the log show one fetch, invocation,
get, and response?

Here's my autosuggest tag code:
<cfinput type="text"
name="partnername"
autosuggest="cfc:get_partnername.lookup({cfautosuggestvalue},{SOURCE})"
size="35"
maxResultsDisplayed = "1000"
autosuggestminlength = "2"
align="left"
style="z-index:1000;"
autosuggestbinddelay="1"
required="yes"
tabindex="0">
Here's the result from the ColdFusion Ajax Logger:
info:http: CFC invocation response: ["SAFARI
MICRO","SALTSPRING SOFTWARE","SANDIRECT","SANITY SOLUTIONS","Sanity
Solutions, Inc.","SANSTOR, LLC","SANZ","Savoir-Faire Solutions"]
info:http: HTTP GET
get_partnername.cfc?method=lookup&returnFormat=json&argumentCollection=%7B%22search%22%3A %22sa%22%2C%22SOURCE%22%3A%22US%22%7D&_cf_nodebug=true&_cf_nocache=true&_cf_clientid=DDF9F E40849174E98711713980BB387B&_cf_rc=1
info:http: Invoking CFC: get_partnername.cfc , function:
lookup , arguments: {"search":"sa","SOURCE":"US"}
info:widget: Fetching data for autosuggest id: partnername ,
current value: 'sa'
info:http: CFC invocation response: ["SAFARI
MICRO","SALTSPRING SOFTWARE","SANDIRECT","SANITY SOLUTIONS","Sanity
Solutions, Inc.","SANSTOR, LLC","SANZ","Savoir-Faire Solutions"]
info:http: HTTP GET
get_partnername.cfc?method=lookup&returnFormat=json&argumentCollection=%7B%22search%22%3A %22sa%22%2C%22SOURCE%22%3A%22US%22%7D&_cf_nodebug=true&_cf_nocache=true&_cf_clientid=DDF9F E40849174E98711713980BB387B&_cf_rc=0
info:http: Invoking CFC: get_partnername.cfc , function:
lookup , arguments: {"search":"sa","SOURCE":"US"}
info:widget: Fetching data for autosuggest id: partnername ,
current value: 'sa'
info:widget: Creating window: 830591398
info:widget: Selected tab, id: orginfo in tab container, id:
cf_layout1209077371319
info:LogReader: LogReader initialized
info:global: Logger initialized
I make a single 2 character entry and the results shown in
the log above get delivered immediately. It's clearly firing twice.
Doesn't matter what I set the binddelay: default, 1, 2, 10....it
fires twice. I hope I'm not exposing my ignorance on how all this
AJAX stuff works, but shouldn't the log show one fetch, invocation,
get, and response?

REUSE_ALV_HIERSEQ_LIST_DISPLAY - comment per header entry

Similar Messages

Maybe you are looking for